V-752EW - Schuss Home Electronic
V-752EW - Schuss Home Electronic
V-752EW - Schuss Home Electronic
Erfolgreiche ePaper selbst erstellen
Machen Sie aus Ihren PDF Publikationen ein blätterbares Flipbook mit unserer einzigartigen Google optimierten e-Paper Software.
Disassembly and Reassembly<br />
1-2-25 Belt Pulley Removal<br />
1) Remove the Belt Pulley Œ.<br />
Note : Take extreme care not to get grease on Belt<br />
Pulley Œ at assembling or reassembling.<br />
Œ BELT PULLEY<br />
Fig. 4-35 Belt Pulley Removal<br />
1-2-26 Damper Capstan, Motor Capstan Ass’y<br />
Removal<br />
1) Remove the Damper Capstan Œ in the direction<br />
of arrow.<br />
2) Remove the 3 Screws ´.<br />
3) Remove the Motor Capstan Ass’y ˇ.<br />
Assembly :<br />
1) Match the 3 holes of Motor Capstan Ass’y ˇ to the<br />
3 holes of Main Base. Be careful not to drop or<br />
knock the Motor Capstan Ass'y ˇ.<br />
2) Tighten the 3 Screws ´ in the direction of arrow<br />
as shown detail drawing.<br />
3) Assemble the Damper Capstan Œ.<br />
Note : After tightening screws, check if there is gap<br />
between the head of screws and the top side of Main<br />
Base. There should have no gap between the head of<br />
screws and the top side of Main Base.<br />
After reinstalling, adjusting the tape transport<br />
system again.<br />
´ 3 SCREWS<br />
4-18 Toshiba<br />
A<br />
C<br />
B<br />
Œ DAMPER CAPSTAN<br />
ˇ MOTOR CAPSTAN ASS'Y<br />
Fig. 4-36 Damper Capstan,Motor Capstan Ass’y Removal