Bedienungsanleitung
Bedienungsanleitung Bedienungsanleitung
Preface Dear Customer, we like to congratulate you on the purchase of your new car amplifier! You have chosen a product which combines deliberate technical features with an appealing design. Please read this manual conscientiously and carry out the given instructions before and while you are using your new device. Reference Manual Car Hifi-Amplifier „Blackcube 2.4“ Capability Characteristics • The on-/off mode is controlled over the radio. • Adjustable input sensitivity, low-pass filter and highpass filter. (Tri-state-buffer) • Bridgeable 6-/4-/3-/2- channel mode. • Functions shown by LEDs . • Gold plated low level input connectors. • Electronic protection against excessive heat, short circuit and input voltage fluctuation. Security Advices Technical Specifications: 099-075 Weight: 3.05 kg Measurement (W*H*D): 250*60*320 mm Operation: DC 12 V (car battery) Power: max. 4 x 600 W / 2 x 1200 W RMS-Power: 4 x 60 W / 2 x 120 W Frequency Response: 10 – 40000 Hz Low-pass Filter: 40 – 300 Hz (12 dB per octave) High-pass Filter: 80 – 1200 Hz (12 dB per octave) Input Sensitivity: 0.4 – 5 V Input Impedance: 33 kΩ Signal/Noise-Ratio (S/N): > 100 dB Stereo Separation: > 60 dB Total Harmonic Distortion (THD): < 0.05% Fuse Rating: 2 x 25 A • Before using the device, please check it for any possible damages. In case of damage do not operate it. • Interconnect a fuse between the amplifier and the battery. • The device may not become subject of mechanical stress and should not be exposed to humidity. • To be considerate of the ventilation do not cover the device and protect it from direct solar radiation. • Clean the device with a dry and soft cloth only. • Caution! Should the device itself get damaged, please let the repair to the manufacturer or to a qualified service agent. • Please dispose packaging materials properly and do not let play children with it. • The device itself is no toy either. Do not let children play with it too. P2009 Jens Broecking © Firma WJG, Braunschweig. Nachdruck oder Vervielfältigung nur mit ausdrücklicher Genehmigung
Actuators and Connectors: 1. LOW INPUT: Cinch connector for the input signal from the car radio. 2. LINE OUT: Cinch connector for output signal to another amplifier. 3. GAIN: Adjuster input sensitivity for the channels 1/2 as well as 3/4. 4. X-OVER: Switch frequency separating filter for channels 1/2 and 3/4 (HPF/LPF/FULL). 5. BASS: Adjuster bass-booster for channels 1/2 and 3/4 (0dB/6dB/12dB). 6. TREBLE: Adjuster treble-booster for channels 1/2 and 3/4 (0dB/6dB/12dB). 7. L.P.F: Frequency adjustment low pass filter for channels 1/2 and 3/4. 8. H.P.F: Frequency adjustment high pass filter for channels 1/2 and 3/4. 9. POWER: LED as operation display. 10. PROTECT: LED as overload display. 11. POWER (GND/REM/B+): Power supply terminal. 12. FUSE: Fuses. 13. SPEAKER OUTPUT: Speaker terminal. 099-075 P2009 Jens Broecking © Firma WJG, Braunschweig. Nachdruck oder Vervielfältigung nur mit ausdrücklicher Genehmigung
- Seite 1 und 2: Einführung Geehrter Kunde, wir mö
- Seite 3 und 4: Installation: 099-075 • Schrauben
- Seite 5 und 6: Betriebsarten des Verstärkers: 1.
- Seite 7: Einstellungen: 099-075 Eingangsempf
- Seite 11 und 12: • Connect the stereo output of th
- Seite 13 und 14: 3. 4-channal mode: 099-075 Here all
Preface<br />
Dear Customer,<br />
we like to congratulate you on the<br />
purchase of your new car amplifier!<br />
You have chosen a product which<br />
combines deliberate technical features<br />
with an appealing design.<br />
Please read this manual conscientiously<br />
and carry out the given instructions before<br />
and while you are using your new device.<br />
Reference Manual<br />
Car Hifi-Amplifier „Blackcube 2.4“<br />
Capability Characteristics<br />
• The on-/off mode is controlled over the radio.<br />
• Adjustable input sensitivity, low-pass filter and highpass<br />
filter. (Tri-state-buffer)<br />
• Bridgeable 6-/4-/3-/2- channel mode.<br />
• Functions shown by LEDs .<br />
• Gold plated low level input connectors.<br />
• Electronic protection against excessive heat, short<br />
circuit and input voltage fluctuation.<br />
Security Advices<br />
Technical Specifications:<br />
099-075<br />
Weight: 3.05 kg<br />
Measurement (W*H*D): 250*60*320 mm<br />
Operation: DC 12 V (car battery)<br />
Power: max. 4 x 600 W / 2 x 1200 W<br />
RMS-Power: 4 x 60 W / 2 x 120 W<br />
Frequency Response: 10 – 40000 Hz<br />
Low-pass Filter: 40 – 300 Hz (12 dB per octave)<br />
High-pass Filter: 80 – 1200 Hz (12 dB per octave)<br />
Input Sensitivity: 0.4 – 5 V<br />
Input Impedance: 33 kΩ<br />
Signal/Noise-Ratio (S/N): > 100 dB<br />
Stereo Separation: > 60 dB<br />
Total Harmonic Distortion (THD): < 0.05%<br />
Fuse Rating: 2 x 25 A<br />
• Before using the device, please check it for any possible damages. In case of damage do not operate it.<br />
• Interconnect a fuse between the amplifier and the battery.<br />
• The device may not become subject of mechanical stress and should not be exposed to humidity.<br />
• To be considerate of the ventilation do not cover the device and protect it from direct solar radiation.<br />
• Clean the device with a dry and soft cloth only.<br />
• Caution! Should the device itself get damaged, please let the repair to the manufacturer or to a qualified<br />
service agent.<br />
• Please dispose packaging materials properly and do not let play children with it.<br />
• The device itself is no toy either. Do not let children play with it too.<br />
P2009 Jens Broecking © Firma WJG, Braunschweig. Nachdruck oder Vervielfältigung nur mit ausdrücklicher Genehmigung
Change language