Flyer LAP-TEQ

THE LAP-TEQ PLUS
TEQSAS

THE LAP-TEQ PLUS
The LAP-TEQ is designed to reliably adjust the site angle of a line array or groups of
multiple speakers. This provides information on the vertical orientation of the speaker
element.
It consists of two components, a sensor module unit and a reading unit with
a display. The Sensor Module is showing the impact of the top speaker with the help of a
green cross laser.
The new LAP-TEQ PLUS display has a more robust housing.
The display is a color graphic 1,8” TFT which shows the angle
read out in bigger and more easy to read numbers.
Furthermore, numerous function settings can be adjusted
via the display (e.g. interval of blinking of the laser).
LAP-TEQ Display has one available LAP-TEQ Port.
LAP-TEQ
The LAP-TEQ plus Sensor is the next generation of the
well known LAP-TEQ inclinometers. The inclination angle
measurement of the new LAP-TEQ PLUS sensor is much
more precise than the previous model.
The calibration of the sensor is less sensitive to vibration.
If necessary the sensor can easily be recalibrated without
opening the housing. The sensor has improved humidity
protection and is LAP-TEQ Port compatible.
LAP-TEQ
The altimeter to monitor
the current elevation.
The temperature
and humidity meter.
LAP-TEQ
TEQSAS

THE LAP-TEQ PLUS
in operation...
-4.2°
In addition to showing the tilt angle
on the LAP-TEQ display, the green laser beam
helps you to visually check the
correct positioning.
1 LAP-TEQ Display
2 LAP-TEQ Sensors
1 Calibration cable
1 Charger Set
complete in carrying case
LAP-TEQ
The new reference to the TEQSAS LAP-TEQ PORT technology
shows the user which TEQSAS components are compatible
with the LAP-TEQ systems.
It is a technology to be able to read out LAP-TEQ sensors
and exchange data information with each other.
TEQSAS

YOUR AUTHORIZED DISTRIBUTOR
TEQSAS
TEQSAS GmbH Otto-Hahn-Str. 20a 50354 Hürth GERMANY
www.teqsas.de