Integrierte Vermeidung und Verminderung der Umweltverschmutzung
Integrierte Vermeidung und Verminderung der Umweltverschmutzung Integrierte Vermeidung und Verminderung der Umweltverschmutzung
Chapter 2 2.2.18.7 Cold stabilisation Cold stabilisation involves rapid cooling of the wine to near freezing temperatures to precipitate tartrate crystals which are undesirable in the bottled wine, whether present in the cork or in the bottom of the bottle. Tartrate precipitates in the tanks and is removed with an alkaline cleaning solution of 10 % caustic soda. 2.2.18.8 Bottling Before bottling, wine is passed through a filtration system to remove remaining solid and insoluble turbid compounds. Bottling involves the microbial stabilisation of the wine and preserves the wine from important changes in taste and chemical composition. 2.2.19 Soft drinks Soft drinks can be categorised into two main types, i.e. carbonated and still. Soft drinks include spring waters, fruit and juice based drinks such as cordials, squashes and barley waters; flavoured drinks such as ginger beer; tonic waters and lemonades, as well as infusions such as tea and coffee. Ingredients typically found in most soft drinks include water, sweetener, acid and flavourings. Optional ingredients include fruit, carbon dioxide, preservatives and colour. Water is the main ingredient of all soft drinks and, as such, the quality of the water, in terms of its microbiological loading and other parameters which affect the final sensory qualities of the drink, are of paramount importance. Most soft drinks are sweetened with natural sweeteners such as sugar and sugar syrups, and/or intense sweeteners such as saccharin and aspartame. Flavourings used in manufacture are often derived from highly concentrated liquid mixtures of plant extracts such as fruit, flowers, seeds, leaves, bark and root. Alternatively, they may be synthetic. All sparkling soft drinks require the addition of carbon dioxide. This may be sourced as a coproduct from the petroleum, beer and whisky industries, or produced on site. The preservation of soft drinks can be achieved by a number of techniques including heating, chemical preservation and filtration. These methods, in combination with low pH, prevent microbiological spoilage. The basic processes for the manufacture of soft drinks involve the mixing of ingredients in the syrup room, followed by the addition of water that has been subjected to various water treatments. The mixture may be heat processed or chemically preserved at this stage. The product is carbonated if required. Alternatively, after the syrup and water are combined, the product may be filled into packaging and in-pack heat processed. Syrups may require filtration or homogenisation and may be pasteurised. Most packaging is cleaned prior to filling, either by rinsing with water, possibly containing rinsing aids, or by air blasting. 2.2.20 Citric acid Citric acid, a tricarboxylic acid, exists widely in nature and is produced in almost all living cells as an intermediate substance in the metabolic cycle. Most plant and animal tissues, as well as human serum, contain citric acid in a significant quantity. The most economical method to produce citric acid is fermentation, which employs a strain of Aspergillus niger as an inoculum, to convert sugar to citric acid. The fermentation feedstock or substrate is a carbohydrate, usually molasses, crystalline sugar, glucose from wheat, maize or potato starch, or isomerose. There are two types of fermentation processes, i.e. submerged and surface fermentation. Submerged fermentation is preferred to surface fermentation. Submerged fermentation consists of three main phases, i.e. fermentation, recovery, and purification of citric acid. The flowchart for this process is presented in Figure 2.22. 110 January 2006 RHC/EIPPCB/FDM_BREF_FINAL
Chapter 2 In citric acid fermentation, the substrate is prepared in a tank and then sterilised. The inoculum is produced under controlled aseptic conditions. The inoculum and the substrate are transferred aseptically to the production fermenter. The fermentation process requires 3 to 14 days. Finally, the biological solids called mycelium are removed by filtration. In the recovery of citric acid, the dissolved citric acid is separated from residual sugars, proteins and other soluble impurities by the addition of lime precipitating calcium citrate. Then, the slurry containing calcium citrate is filtered. The filtrate is washed to remove soluble impurities. The waste water generated is discharged. Sulphuric acid is added and this converts the calcium citrate to calcium sulphate and citric acid. Finally, the precipitated calcium sulphate or gypsum is filtered from the slurry and the remaining citric acid solution is further treated. Ultimately, the citric acid solution is purified by ion exchange and carbon adsorption. The citric acid solution is evaporated and crystallised from the solution (first crystallisation). The citric acid crystals are centrifuged. Later, citric acid is dissolved in water and crystallised again from the solution (second crystallisation). The crystals are centrifuged yet again and are dried, milled and sieved. The resultant citric acid is then packaged. Figure 2.22: Citric acid fermentation process [151, Austrian contribution, 2002] RHC/EIPPCB/FDM_BREF_FINAL January 2006 111
- Seite 119 und 120: Meat Fish Meat Potat o Fruit and ve
- Seite 121 und 122: 2.2.1 Meat and poultry Chapter 2 Be
- Seite 123 und 124: 2.2.1.1.2 Cutting (B.1) Chapter 2 F
- Seite 125 und 126: 2.2.1.2.3 Pickling (D.7) Chapter 2
- Seite 127 und 128: 2.2.1.3.2 Ageing (D.14) Chapter 2 H
- Seite 129 und 130: 2.2.2.3 Crustaceans Chapter 2 Once
- Seite 131 und 132: 2.2.3.2 Fruit juice Chapter 2 Fruit
- Seite 133 und 134: 2.2.3.6 Dried fruit Chapter 2 Dried
- Seite 135 und 136: 2.2.3.10 Heat treated and frozen ve
- Seite 137 und 138: Chapter 2 The neutralised oil is bl
- Seite 139 und 140: Chapter 2 In traditional production
- Seite 141 und 142: Chapter 2 UHT or sterilisation is u
- Seite 143 und 144: Heat Stabilising salt Heat Electric
- Seite 145 und 146: Heat Heat Refrigeration Starter cul
- Seite 147 und 148: Chapter 2 A further process involve
- Seite 149 und 150: Chapter 2 Colours and flavours are
- Seite 151 und 152: Chapter 2 During final drying, the
- Seite 153 und 154: FW : PW : RPW : Fresh water Process
- Seite 155 und 156: FW : Fresh water PW : Process water
- Seite 157 und 158: Chapter 2 coolers in which the pell
- Seite 159 und 160: Chapter 2 In the UK, the majority o
- Seite 161 und 162: 2.2.11.5 Boiled sweets Chapter 2 Bo
- Seite 163 und 164: 2.2.13.2 Instant coffee Chapter 2 I
- Seite 165 und 166: Chapter 2 The indirect method is ca
- Seite 167 und 168: 2.2.16.1 Mashing Chapter 2 Grains a
- Seite 169: 2.2.18 Wine This section includes r
- Seite 174 und 175: Chapter 3 The consumption and emiss
- Seite 176 und 177: Chapter 3 Surface water 23% Other w
- Seite 178 und 179: Chapter 3 3.1.2 Air emissions Air e
- Seite 180 und 181: Chapter 3 3.1.3.4 Product defects/r
- Seite 182 und 183: Chapter 3 C.9 Bleaching N N W1,W3 C
- Seite 184 und 185: Chapter 3 3.2.1.3 Solid output Some
- Seite 186 und 187: Chapter 3 3.2.4.3 Energy The electr
- Seite 188 und 189: Chapter 3 3.2.9 Extraction (C.1) 3.
- Seite 190 und 191: Chapter 3 3.2.13.3 Solid output Fil
- Seite 192 und 193: Chapter 3 3.2.18.5 Noise Noise issu
- Seite 194 und 195: Chapter 3 3.2.24 Fermentation (D.4)
- Seite 196 und 197: Chapter 3 3.2.29.4 Energy Energy is
- Seite 198 und 199: Chapter 3 3.2.36.2 Air emissions St
- Seite 200 und 201: Chapter 3 3.2.40.3 Solid output Oil
- Seite 202 und 203: Chapter 3 3.2.45 Dehydration (solid
- Seite 204 und 205: Chapter 3 3.2.48 Freeze-drying/lyop
- Seite 206 und 207: Chapter 3 3.2.52.3 Solid output Ash
- Seite 208 und 209: Chapter 3 Sector Water consumption
- Seite 210 und 211: Chapter 3 3.3.1 Meat and poultry 3.
- Seite 212 und 213: Chapter 3 3.3.1.2.2 Salami and saus
- Seite 214 und 215: Chapter 3 Unit operation Cured ham
- Seite 216 und 217: Chapter 3 3.3.2.1 Water consumption
- Seite 218 und 219: Chapter 3 By-products from the fill
Chapter 2<br />
2.2.18.7 Cold stabilisation<br />
Cold stabilisation involves rapid cooling of the wine to near freezing temperatures to precipitate<br />
tartrate crystals which are <strong>und</strong>esirable in the bottled wine, whether present in the cork or in the<br />
bottom of the bottle. Tartrate precipitates in the tanks and is removed with an alkaline cleaning<br />
solution of 10 % caustic soda.<br />
2.2.18.8 Bottling<br />
Before bottling, wine is passed through a filtration system to remove remaining solid and<br />
insoluble turbid compo<strong>und</strong>s. Bottling involves the microbial stabilisation of the wine and<br />
preserves the wine from important changes in taste and chemical composition.<br />
2.2.19 Soft drinks<br />
Soft drinks can be categorised into two main types, i.e. carbonated and still. Soft drinks include<br />
spring waters, fruit and juice based drinks such as cordials, squashes and barley waters;<br />
flavoured drinks such as ginger beer; tonic waters and lemonades, as well as infusions such as<br />
tea and coffee.<br />
Ingredients typically fo<strong>und</strong> in most soft drinks include water, sweetener, acid and flavourings.<br />
Optional ingredients include fruit, carbon dioxide, preservatives and colour. Water is the main<br />
ingredient of all soft drinks and, as such, the quality of the water, in terms of its microbiological<br />
loading and other parameters which affect the final sensory qualities of the drink, are of<br />
paramount importance. Most soft drinks are sweetened with natural sweeteners such as sugar<br />
and sugar syrups, and/or intense sweeteners such as saccharin and aspartame. Flavourings used<br />
in manufacture are often <strong>der</strong>ived from highly concentrated liquid mixtures of plant extracts such<br />
as fruit, flowers, seeds, leaves, bark and root. Alternatively, they may be synthetic.<br />
All sparkling soft drinks require the addition of carbon dioxide. This may be sourced as a coproduct<br />
from the petroleum, beer and whisky industries, or produced on site. The preservation<br />
of soft drinks can be achieved by a number of techniques including heating, chemical<br />
preservation and filtration. These methods, in combination with low pH, prevent<br />
microbiological spoilage.<br />
The basic processes for the manufacture of soft drinks involve the mixing of ingredients in the<br />
syrup room, followed by the addition of water that has been subjected to various water<br />
treatments. The mixture may be heat processed or chemically preserved at this stage. The<br />
product is carbonated if required. Alternatively, after the syrup and water are combined, the<br />
product may be filled into packaging and in-pack heat processed. Syrups may require filtration<br />
or homogenisation and may be pasteurised. Most packaging is cleaned prior to filling, either by<br />
rinsing with water, possibly containing rinsing aids, or by air blasting.<br />
2.2.20 Citric acid<br />
Citric acid, a tricarboxylic acid, exists widely in nature and is produced in almost all living cells<br />
as an intermediate substance in the metabolic cycle. Most plant and animal tissues, as well as<br />
human serum, contain citric acid in a significant quantity.<br />
The most economical method to produce citric acid is fermentation, which employs a strain of<br />
Aspergillus niger as an inoculum, to convert sugar to citric acid. The fermentation feedstock or<br />
substrate is a carbohydrate, usually molasses, crystalline sugar, glucose from wheat, maize or<br />
potato starch, or isomerose. There are two types of fermentation processes, i.e. submerged and<br />
surface fermentation. Submerged fermentation is preferred to surface fermentation.<br />
Submerged fermentation consists of three main phases, i.e. fermentation, recovery, and<br />
purification of citric acid. The flowchart for this process is presented in Figure 2.22.<br />
110 January 2006 RHC/EIPPCB/FDM_BREF_FINAL