Wulf Zargen Prokuktkatalog Stahlzargen

Invitation to tender text for Wulf custom frames
1
Invitation to tender text for Wulf custom frames for rebated or flush-closing doors
Design based on DIN 18111-3
Sheet thickness ………………………………………………………... 1.5 mm / 2.0 mm in tolerances as per DIN EN 10142
Surface …………………………………………………………………… Sendzimir galvanised thin sheet steel, enamel primed
with 1K epoxy etch primer, agate grey (c. RAL 7038)
or powder coated in an RAL colour
Handle height ……………………………………………………….…. 1050 mm
Floor recess (BE) …………………………………………………..…… 30 mm / no floor recess (‚ohne BE‘)
Counter-frame width …. front (rebate side) …………….......…... ______ mm (normally 30 mm)
back (side opposite rebate) ………….. ______ mm
Plaster edge ……………… front (rebate side) ……………….…….. ______ mm (normally 9 mm)
back (side opposite rebate) ………….. ______ mm (normally 9 mm)
Spacer bracket ……………………………………………………..…. welded on or screwed on
Rebate design ……………………………………………………….... Width: 15 mm (normal) or
20 mm in combination with a special seal
for door leaf thickness of 40 mm ……. Depth up to sealing material 24 mm (for rebated door leaves)
for door leaf thickness of 40 mm ……. Depth up to sealing material 42 mm (for flush door leaves)
for door leaf thickness of ____ mm ….. Depth up to sealing material mm (for rebated/flush door leaves
Hinge system ……………. prepared for …………………..……….. Make:
(Hinges: supplied by customer)
Model or no.:
_______________________________________
_______________________________________
Number / side: _______________________________________
Lock latch and bolt …………………………………………………... punched through or pre-punched as desired
Metre mark …………….... 1000 mm from OFF ……………....….. ______ mm from OFF
Anchor system …………… Type: __________________ ……...….. spot-welded / loose
Elastic cavity seal ……………………………………..……………… on 3 sides, included loose
Quality: ______________ ……...…….. PVC / TPE
Colour: _______________ ……...…….. depending on availability: grey, black, brown, white
Subject to technical changes
1.15.02