BVT-Merkblatt zu Abwasser- und Abgasbehandlung

­ Benzo(a)anthracene
­ Benzo(b)fluoranthene
­ Benzo(j)fluoranthene
­ Benzo(k)fluoranthene
­ Dibenzo (a,h) acridine
Class II
If the mass flow equals or exceeds 5 g/h: 1 mg/Nm 3
­ Arsenic and its compounds, expressed
as As
­ Chromium(VI) and its compounds, expressed
as Cr
­ Cobalt and its compounds, expressed as
Co
­ 3,3'-Dichlorobenzidine and its salts
­ Dimethyl sulphate
­ Ethylenimine
­ Nickel and its compounds, expressed as
Ni
­ 4-Aminobiphenyl and its salts
Class III
If the mass flow equals or exceeds 25 g/h: 5 mg/Nm 3
­ Acrylonitrile
­ Benzene
­ 1,3-Butadiene
­ 1-Chloro-2,3-epoxipropane (epichlorohydrine)
­ 1,2-Dibromoethane
­ 1,2-Epoxipropane
­ 1,2-Dichloroethane
­ VCM
­ 1,3-Dichloro-2-propanol
Annexes
­ Dibenzo(a)pyrene
­ Dimethylnitrosamine
­ 5-Nitroacenaphthene
­ 2-Nitronaphthalene
­ 1-Methyl-3-Nitro-1-Nitrosoguanidin
­ Benzidine and its salts
­ 4,4'-Methylene-bis(2-Chloroanilin) and
its salts
­ Diethyl sulphate
­ 3,3'-Dimethylbenzidine and its salts
­ Hexamethylphosphorotriamide
­ 2-Methylaziridine
­ Methyl azoxymethyl acetate
­ Sulfallate
­ Dimethyl carbamoylchloride
­ 3,3'-Dimethoxybenzidine and its salts
­ Chloromethyl methyl ether
­ N,N-Dimethylhydrazine
­ Hydrazine
­ Ethylene oxide
­ Ethylene thiourea
­ 2-Nitropropane
­ Bis-Chloromethylether
­ 3-Propanolide
­ 1,3-Propane sultone
­ Styrene oxide
1.2 Substances with very high toxicity and bioaccumulability (Table A2)
Table A2
Class I
If the mass flow equals or exceeds 0.02 g/h: 0.01 mg/Nm 3
­ PCDD ­ PCDF
Class II
If the mass flow equals or exceeds 0.5 g/h: 0.5 mg/Nm 3
­ PCB
­ Polychloronaphthenes
­ PCT
Waste Water and Waste Gas Treatment 423