BVT-Merkblatt zu Abwasser- und Abgasbehandlung

Annexes
48. Plants for the series painting of the automotives bodies and their components with exception
of bus bodies
49. Others painting plants
50. Plants for the production of rubber products
51. Plants for the impregnation of glass fibres or mineral fibres with resins
52. Plants for the production of sugar
53. Plants for extraction and the refining of olive husk oil
54. Plants for extraction and the refining of seed oils
ANNEX 3 (LARGE UTILITIES AND SPECIFIC FIELDS):
A: Large Combustion Plants
Field of application
Emission values time requirements for compliance
Abatement technique malfunction of abatement plants
B: Mineral Oil Refineries
Field of application
Emission values
Measurements
Other prescriptions
Time requirements for compliance of Refineries
C: Plants for the cultivation of hydrocarbons and geothermal fluids
Application field
Cultivation of hydrocarbons
Plants using geothermal fluids
ANNEX 4 (SAMPLING, ANALYSIS AND EMISSIONS ASSESSMENT METHODS)
ANNEX 5 (ABATEMENT TECHNIQUES)
Summary table
Application criteria
ANNEX 6 (DIFFUSE EMISSIONS)
ANNEX 7 (FUGITIVE EMISSIONS)
ANNEX 1: Mass flow threshold and concentration limits
(standard conditions: 0 °C, 101.3 kPa; hourly values)
1.1 Substances considered as carcinogenic and/or teratogenic and/or mutagenic (Table
A1)
Table A1
Class I
If the mass flow equals or exceeds 0.5 g/h: 0.1 mg/Nm 3
­ Asbestos (chrysotile, crocidolite,
amosite, antofillite, actinolite and
tremolite)
­ Benzo(a)pyrene
­ Beryllium and its compounds, expressed
as Be
­ Dibenzo(a,h)anthracene
­ 2-Naphthylamine and its salts
422 Waste Water and Waste Gas Treatment