Download - IP-Symcon

10V)4 variable speed outputs and 7 relay outputsTwo additional outputs can be retrofitted with a relay moduleOperation via scroll wheel and large displayIntegrated potentiostat for electrical anticorrosion storageCAN-Bus to exchange data with other or further UVR1611 devicesInfrared interface for updating the software(Quelle: TA)The connection to IP Symcon takes place via LAN or USB using the 'BOOTLOADER'. The reading via the CAN-Bus isnot possible.Manufacturer: http://www.ta.co.atInstallationThe UVR1611 can be connected to IP-Symcon via the BL-NET. It is possible to use the USB port or the Ethernetinterface. In each case, the DL (data line) are used. The reading via the CAN bus is not possible. The reading via theCAN-Bus is not possible.Once you have created an instance in IP-Symcon, you must specify the IP address of your BL-NET. If you want to usethe USB version, you must create a new parent instance and select the serial port.In order to display one or more variables in the WebFront, each must be assigned to a profile (e.g. temperature) to makethe right value recognizable in the visualization. The scheme and the inputs of the UVR1611 are defined by the user and itcan not be done automatically by the system. More information about variable profiles can be found here: UngültigerLink: Variables profilesIf you want to connect __two (2) __ UVR1611, then two instances must be created. Once with the ID = 1 and ID = 2.The timer can be activated only in one of the two instances, since a request provides both data packets and thus updatesboth instances.Tips & TricksSince the BL-NET is not very strong, a few applications as possible should access the device. Otherwise it may lead tofailures in which the BL-NET is not available.The following entries in the log are normal and no error:Client Socket | Socket: Verbinde…. #1Client Socket | Socket: VerbundenClient Socket | Socket: Getrennt