SW4000 USER MANUAL - Nilfisk PARTS - Nilfisk-Advance

ENGLISHUSER MANUALTECHNICAL DATA (Continues)Model SW4000 P SW4000 LPWeight kerb weight 511 Kg 515 Kgtotal kerb weight (*) 594 Kg 622 Kgfront axle kerb weight (*) 251 Kg 254 Kgrear axle kerb weight (*) 343 Kg 368 Kggross vehicle weight (GVW) 775 Kg 803 KgWheel specific pressure on the floor (front - rear wheels, in running conditions) 0.8 - 0.2 N/mm 2Sound pressure level at workstation (ISO 11201, ISO 4871, EN 60335-2-72) (LpA)Machine sound pressure level (ISO 3744, ISO 4871, EN 60335-2-72) (LwA)IP protection classDust guard system water tank (optional) capacityU-turn space (right - left)75 dB(A) ± 3 dB(A)94 dB(A)X320 litres1,920 - 1,890 mmVibration level at the operator’s arms (ISO 5349-1) (**) < 2.5 m/s 2Vibration level at the operator’s body (ISO 2631-1) (**) < 0.9 m/s 2(*) With operator on board, fuel tank and hopper empty.(**) Under normal working conditions, on a level asphalt surface.Machine material composition and recyclabilityTypeRecyclablepercentageSW4000 P weightpercentageSW4000 LP weightpercentageAluminium 100 % 0.0 % 0.0 %Electric motors - various 29 % 21.1 % 21.1 %Ferrous materials 100 % 48.3 % 48.8 %Wiring harnesses 80 % 0.8 % 0.8 %Liquids 100 % 0.5 % 0.5 %Plastic - non-recyclable material 0 % 0.9 % 0.8 %Plastic - recyclable material 100 % 8.6 % 8.4 %Polyethylene 92 % 6.0 % 5.9 %Rubber 20 % 3.5 % 3.5 %Cardboard - paper - wood 100 % 10.3 % 10.2 %Hydraulic oil technical dataViscosity at 40 °C mm 2 /s 45 32Viscosity at 100 °C mm 2 /s 7.97 6.40Viscosity index / 150 157Flash point COC °C 215 202Pour point °C -36 -36Density at 15 °C kg/l 0.87 0.865CAUTION!If the machine is to be used at ambient temperatures below +10 °C, the oil should be changed with equivalent oilhaving a viscosity of 32 cSt. For temperatures below 0 °C, use an oil with lower viscosity.12 SW4000 - 1464815000