SW4000 USER MANUAL - Nilfisk PARTS - Nilfisk-Advance

ENGLISHUSER MANUALINTRODUCTIONNOTEThe numbers in brackets refer to the components shown in Machine Description chapter.MANUAL PURPOSE AND CONTENTSThe purpose of this Manual is to provide the operator with all necessary information to use the machine properly, in a safe andautonomous way. It contains information about technical data, safety, operation, storage, maintenance, spare parts and disposal.Before performing any procedure on the machine, the operators and qualified technicians must read this Manual carefully. ContactNilfisk in case of doubts concerning the interpretation of the instructions and for any further information.TARGETThis Manual is intended for operators and technicians qualified to perform the machine maintenance.The operators must not perform procedures reserved for qualified technicians. Nilfisk will not be responsible for damages comingfrom failure to follow these instructions.HOW TO KEEP THIS MANUALThe User Manual must be kept near the machine, inside an adequate case, away from liquids and other substances that can causedamage to it.DECLARATION OF CONFORMITYThe Declaration of Conformity, supplied with the machine, certifies the machine conformity with the law in force.NOTETwo copies of the original declaration of conformity are provided together with the machine documentation.IDENTIFICATION DATAThe machine model and serial number are marked on the plate (30).Product code and year of production are marked on the same plate.The engine model and serial number are shown on the plate (59).This information is useful when ordering machine and engine spare parts. Use the following table to write down the machine andengine identification data for any further reference.MACHINE model ................................................................................PRODUCT code .................................................................................MACHINE serial number ....................................................................ENGINE model ...................................................................................ENGINE serial number .......................................................................2 SW4000 - 1464815000