SW4000 USER MANUAL - Nilfisk PARTS - Nilfisk-Advance

USER MANUALENGLISHENGINE BAFFLE PLATE CLEANINGWARNING!If the engine was running, the silencer will bevery hot. Let it cool down before operating on thebaffle plate.1. Drive the machine on a level ground and engage theparking brake.2. Turn the ignition key (61) to “0”.3. Open the engine compartment hood (18) with the handle(41) and fasten it with the support rod (53).4. Lift and disassemble the right side bulkhead (45).5. Remove the screws (A, Fig. 24) and carefully removesilencer guard (B).6. Remove the screws (C) and remove the exhaust manifold(D).7. Remove the screws (E) and carefully remove silencerguard (F).8. Remove the screw (G) and remove the baffle plate (H)from the silencer.9. Use a brush to remove the carbon deposits from the baffleplate shield (I). Take care not to cause damage to theshield. Replace the baffle plate if it cracked or perforated.10. Install the baffle plate (H), the silencer guard (F) and theexhaust manifold (D).11. Assemble the components in the reverse order ofdisassembly.AEBFAEDCGHIFigure 24P1006191464815000 - SW4000 33