DMA 35 Portable Density/Specific Gravity/ Concentration Meter - Alber
DMA 35 Portable Density/Specific Gravity/ Concentration Meter - Alber DMA 35 Portable Density/Specific Gravity/ Concentration Meter - Alber
EN7 Operating the DMA 357.1 Connecting the Filling Tube• Screw in the filling tube by hand until you feel some resistance against turning.Do not use any tools for screwing in the filling tube.Fig. 7 - 1Connecting the filling tube7.2 Attaching the Syringe Adapter1. Remove the screw plug at the side of the instrument.2. Screw in the Luer adapter (see Chapter 5) by hand until you feel someresistance against turning. Do not use any tools for screwing in the Luer adapter.22 C96IB01
7.3 Switching the Instrument OnEN• To switch the instrument on, press the key.After showing the welcome screen, DMA 35 immediately switches to the mainscreen (measuring mode). Now you can start with the measuring process.7.4 Switching the Instrument Off• To switch the instrument off, press the key until "Power Off" is displayed.If the instrument is in the energy saving mode (see Chapter 8.4), DMA 35 switchesautomatically off after 3, 5 or 10 minutes inactivity (depending on the setting).C96IB01 23
- Seite 1: DMA 35Portable Density/Specific Gra
- Seite 4 und 5: ENWhile every precaution has been t
- Seite 6 und 7: EN9.1.3 Importing Custom Functions
- Seite 8 und 9: EN1 About the Instruction ManualThi
- Seite 10 und 11: EN2 Safety Instructions• Read thi
- Seite 12 und 13: EN• Do not leave sample/rinsing c
- Seite 14 und 15: EN5 Checking the Supplied PartsDMA
- Seite 16 und 17: ENTable 5.2: Optional partsArticle
- Seite 18 und 19: EN2 314Fig. 6 - 2 Top view of DMA 3
- Seite 20 und 21: EN6.3 Display23b3a1412561171098Fig.
- Seite 24 und 25: EN8 Defining the Basic Settings8.1
- Seite 26 und 27: EN8.7 Allocation of the Softkey Fun
- Seite 28 und 29: ENTo set the time format1. Press a
- Seite 30 und 31: EN• Make sure to carefully clean
- Seite 32 und 33: ENMeas. OptionsDescriptionunitsBaum
- Seite 34 und 35: EN9.2 Selecting Measuring MethodsAp
- Seite 36 und 37: ENMethod list templateThe following
- Seite 38 und 39: EN9.2.6 Selecting a Method1. Press
- Seite 40 und 41: ENSample ID listThe following table
- Seite 42 und 43: EN9.4 Selecting the Measurement Mod
- Seite 44 und 45: EN9.5.3 Programming RFID TagsBeside
- Seite 46 und 47: EN3. Hold the allocated or programm
- Seite 48 und 49: EN9.6.2 Filling with the Plastic Sy
- Seite 50 und 51: EN9.8 Accessing Saved Measuring Dat
- Seite 52 und 53: EN5. Select to export the whole li
- Seite 54 und 55: EN10 Cleaning and Storing the Instr
- Seite 56 und 57: EN11 Maintenance11.1 Changing the B
- Seite 58 und 59: ENFig. 11 - 3Removing the pump lock
- Seite 60 und 61: EN11.3.1 Accessing Device Informati
- Seite 62 und 63: EN12 ReadjustmentTo ensure accurate
- Seite 64 und 65: EN12.5 Restoring to Factory Adjustm
- Seite 66 und 67: EN14 Technical DataMeasuring range:
- Seite 68 und 69: ENAppendix A: Density of Water 4 (0
- Seite 70 und 71: ENID Measuring unit Minimum Maximum
EN7 Operating the <strong>DMA</strong> <strong>35</strong>7.1 Connecting the Filling Tube• Screw in the filling tube by hand until you feel some resistance against turning.Do not use any tools for screwing in the filling tube.Fig. 7 - 1Connecting the filling tube7.2 Attaching the Syringe Adapter1. Remove the screw plug at the side of the instrument.2. Screw in the Luer adapter (see Chapter 5) by hand until you feel someresistance against turning. Do not use any tools for screwing in the Luer adapter.22 C96IB01