Erfolgreiche ePaper selbst erstellen
Machen Sie aus Ihren PDF Publikationen ein blätterbares Flipbook mit unserer einzigartigen Google optimierten e-Paper Software.
3<br />
4<br />
5<br />
6<br />
Insulating the roof<br />
... insulating the pitched roof<br />
Transfer the rafter distance<br />
measurement to the<br />
UNIROLL, adding 1 cm for<br />
clamping.<br />
Cut the UNIROLL using the<br />
cutting board and insulation<br />
knife.<br />
Tip: Place a board underneath<br />
to protect both the<br />
floor and the insulation<br />
knife.<br />
Press the UNIROLL between<br />
the rafters.<br />
Tip: Make sure that no open<br />
gaps remain.<br />
Lay the vapour barrier film<br />
(Vario KM Duplex UV) from<br />
above and staple it to the<br />
rafters. Lay the next strip of<br />
film with a 10 cm overlap.<br />
8<br />
9<br />
Adhere the vapour barrier<br />
film overlaps with the adhesive<br />
tape (Vario KB 1).<br />
Use a collar* (Vario Multi-<br />
Tape) to adhere the penetrations<br />
airtight.<br />
* You can find instructions for building<br />
the collar on the back of the film<br />
insert.<br />
Use the adhesive tape (Vario<br />
MultiTape SL) to seal the<br />
rafter penetrations airtight.<br />
Connect without tension<br />
to the gable wall with Vario<br />
DoubleFit (sealant from the<br />
cartridge).<br />
Alternative: Vario ProTape,<br />
see step 11.<br />
Tip: For hard-to-reach corners,<br />
we always recommend<br />
Vario DoubleFit.<br />
18 19<br />
7<br />
10
Change language