GHV 833 -00.qxp - Triax

Safety RequirementsCAUTION:Observe the safety requirementsof EN 50083 -13 Equipotential bondingThe complete system must be provided withequipotential bonding by means of amechanically stable protective conductor witha minimum cross-section of 4mm 2 . There is aconnection point at the earthing screw at theright wall bracket.NOTE:The unit must not be exposed todripping or splashing water.Installation3 Choose a location and orientation that will notimpair the convection cooling of the amplifier:• Vertical (cooling fins aligned vertically)• Uncovered on wall• Installed in a cabinet only in strictconformance to the permissible ambientoperating temperature (measured in the airstream underneath the amplifier)3 Wall mounting• Fixed to brackets by appropriately sizedscrews (dia. max. 4.8 mm)• Fixings 158 mm apartRecycling InformationWhen this product has reached the endof its useful life, it is to be turned in forproper disposal as electronic refuse incompliance with the current disposal regulationsof your respective city/country/state.Setting possibilitiesDefaultsettingLevel adjuster 0...-20 dB 0 dBLine equalization 0...18 dB 0 dBSettings are done as follows:1. Remove the housing lid:After slackening the central bolt (a) lift the lidoff by releasing the catch on the left-handside (b). The circuit board for adjustments isnow accessible.baaboveFig. 1 Housing6