Montagevoorschrift en gebruiksaanwijzing Montage ... - Twinny Load

Placing the Assembled carrierWhen the bicycle carrier isalready assembled, place it asfollows 1 .Lock the carrier 2 .12Lowering the carrierLoosen the second lock 1 , place the crank 2 , rotate the bicycle carrier down 3 , end position onthe ground 4 .1 23 4Attention!When it is rotated up for thefirst time without bicycles, thecarrier is not yet “set”. The baseframe will then sometimes notfall into the second lock opening1 . To prevent this, you mustapply pressure on the light barwhen rotating the carrier up 2 ,so that the base frame falls intothe second lock opening 3 .✘✔1 2 336