Montagevoorschrift en gebruiksaanwijzing Montage ... - Twinny Load

Placing the bike carrier for assemblyTip: The assembly of the bicycle is easier when it is placed on the bullet.Place the bicycle carrier on the bullet 1 , tighten it horizontally 2 , raise the handle 3 , tighten ithorizontally 4 , repeat steps 2, 3 and 4.123 4Assembly of light bar2 x2 xspanner 10 mmallan key 5 mmAssemble the clamps 1 , place the cover 2 , insert the bolts 3 , place the bolt spacer 4 , positionand tighten the light bar 5 .1232