L<strong>an</strong>dherr, M.; Neum<strong>an</strong>n, M.; Volkm<strong>an</strong>n, J.; Westkämper, E.; Bauernh<strong>an</strong>sl, T.: IndividuelleSoftwareunterstützung für jeden Ingenieur: Adv<strong>an</strong>ced Engineering Platform for Production.In: ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb. 107, <strong>2012</strong>, Nr. 9, S. 628-631.L<strong>an</strong>dherr, M.; Const<strong>an</strong>tinescu, C.: Intelligent m<strong>an</strong>agement of m<strong>an</strong>ufacturing knowledge:Fo<strong>und</strong>ations, motivation scenario <strong>an</strong>d roadmap. In: 45th CIRP Conference on M<strong>an</strong>ufacturingSystems (CIRP CMS) <strong>2012</strong>L<strong>an</strong>dherr, M.: Konfiguration technischer Prozesse durch sem<strong>an</strong>tische Modellierung vonFertigungswissen. In: Produktion im Dialog: Wissen, Technologien, Innovation –Produktionsstrategien für Wertschöpfung <strong>und</strong> Nachhaltigkeit; <strong>GSaME</strong>, Jahrestagung <strong>2012</strong>L<strong>an</strong>dherr, M.; Const<strong>an</strong>tinescu, C.: Digitale Fabrik in einer Cloud <strong>und</strong> Grid Umgebung. In:Siemens PLM Connection <strong>2012</strong>Reuss, M.; Dadalau, A., Verl, A.: Friction Vari<strong>an</strong>ces of Linear Machine Tool Axes. In:Proceedings of the 3rd CIRP Conference on Process Machine Interactions (3rd PMI),Nagoya, 29.-30.10.<strong>2012</strong>, pp.115-119. DOI: 10.1016/j.procir.<strong>2012</strong>.10.021Ye, Q.; Shen, B.; Tiedje, O.: Materialeffizienz bei <strong>der</strong> Airless-Applikation in <strong>der</strong> Beschichtungvon Windenergie-Anlagen. In: Gesellschaft Deutscher Chemiker / Fachgruppe "Lackchemie":Ressourcenschonung durch Beschichtungen - Lacktagung <strong>2012</strong>, BremerhavenYe, Q.; Shen, B.; Tiedje, O.; Domnick, J.: Numerical <strong>an</strong>d experimental study of spray coatingusing air-assisted high pressure atomizers. In: 12th International Conference on LiquidAtomization <strong>an</strong>d Spray Systems - ICLASS <strong>2012</strong>, HeidelbergWalz, A.; Ruß, C.: Macsima: An Agent Framework for Simulating the Evolution ofNegotiation Strategies in B2B-Networked Economies; In: Agent-Based Technologies <strong>an</strong>dApplications for Enterprise Interoperability, Springer, S. 191-218, <strong>2012</strong>, ISBN: 978-3-642-28562-2 (Print), 978-3-642-28563-9 (Online); http://link.springer.com/book/10.1007/978-3-642-28563-9/page/1#section=1040913&page=1&locus=0Cluster C – Material- <strong>und</strong> ProzessengineeringAwaad, M.; Abou el Ezz, M.; El-Maghraby, H. F.; Kern, F.; Sommer, F.; Gadow, R.; Naga, S.M.: Fabrication, Microstructure <strong>an</strong>d Properties of Hot-Pressed Nd:YAG Ceramics. In: Journalof Ceramic Science <strong>an</strong>d Technology, accepted <strong>2012</strong>, (Ref.: Ms. No. JCST-D-11-00043R1)Sommer, F.; Kern, F.; El-Maghraby, H. F.; Abou el Ezz, M.; Awaad, M.; Gadow, R.; Naga, S.M.: Effect of preparation route on the properties of slip casted Al2O3/YAG composites. In:Journal of Ceramics International (<strong>2012</strong>), DOI: 10.1016/j.ceramint.<strong>2012</strong>.02.070Abou el Ezz, M.; El-Maghraby, H. F.; Kern, F.; Sommer, F.; Awaad, M.; Gadow, R.; Naga, S.M.: Ceramic injection molding of alumina-10 vol-% YAG composites. In: Journal of adv<strong>an</strong>cesin applied ceramics, DOI: 10.1179/1743676112Y.0000000050Abou el Ezz, M.; Kern, F.; Gadow, R.: Influence of in-situ platelet reinforcement on themech<strong>an</strong>ical properties <strong>an</strong>d ageing behavior of injection molded ZTA. Europe<strong>an</strong> Inter-Regional Conference on Ceramics (CIEC), Barcelona, 12.-14.09.<strong>2012</strong>111
Bessam, H. E.; Gadow, R.; Arnold, U.: Industrialization Strategy Based on ImportSubstitution Trade Policy. In: Murat Y.; Taylor T. (Ed.): Designing Public Procurement Policyin Developing Countries: How to Foster Technology Tr<strong>an</strong>sfer <strong>an</strong>d Industrialization in theGlobal Economy. Springer Verlag New York, <strong>2012</strong>Freitag, C.; Hafner, M.; Onuseit, V.; Michalowski, A.; Weber, R.; Graf, T.: Diagnostics ofBasic Effects in Laser Processing of CFRP. In: Proceeding of International Symposium onLaser Processing of CFRP <strong>an</strong>d Composites, Yokohama, <strong>2012</strong>Freitag, C.; Onuseit, V.; Weber, R.; Graf, T.: Influence of Different Ambient Media on theLaser Ablation Process of CFRP. In: Proceedings of 31 st International Congress onApplications of Lasers & Electro-Optics ICALEO, Anaheim, <strong>2012</strong>Freitag, C.; Onuseit, V.; Weber, R.; Graf, T.: High-Speed observation of the heat flow inCFRP during laser processing. In: Physics Procedia, 39(<strong>2012</strong>), 171-178Weber, R.; Freitag, C.; Hafner, M.; Onuseit, V.; Berger, P.; Kononenko, T.; Graf, T.: Shortpulselaser processing of CFRP. In: Physics Procedia, 39(<strong>2012</strong>), 137-146Weber, R.; Freitag, C.; Hafner, M.; Onuseit, V.; Graf, T.: Laser processing of CFRP. In:Proceedings of Adv<strong>an</strong>ced Laser Technologies ALT <strong>2012</strong>, Thun, <strong>2012</strong>Weber, R.; Freitag, C.; Hafner, M.; Onuseit, V.; Berger, P.; Graf, T.: Heat Accumulation inShort-Pulse Laser Processing of CFRP. In: Proceedings of 31 st International Congress onApplications of Lasers & Electro-Optics ICALEO, Anaheim, <strong>2012</strong>Weber, R.; Hafner, M.; Freitag, C.; Onuseit, V.; Feuer, A.; Michalowski, A.; Graf, T.: LaserProcessing of Carbon Fibres Reinforced Plastics. In: Proceedings of Stuttgarter LasertageSLT <strong>2012</strong>, Stuttgart, <strong>2012</strong>Graf, T.; Weber, R.; Onuseit, V.; Hafner, M.; Freitag, C.; Feuer, A.: Laser Applications fromProduction to Machining of Composite Materials. In: Proceedings of Europe<strong>an</strong> AutomotiveLaser Applications EALA <strong>2012</strong>, Bad Nauheim, <strong>2012</strong>Heisel, U.; Pfeifroth, T.: Sp<strong>an</strong>ende Bearbeitung von CFK. In: MM Composites World Area,<strong>2012</strong>Heisel, U.; Schaal, M.; Pfeifroth, T.: A operação circular reduz falhas e aumenta aqualidade. In: Máquinas e Metais 48 (<strong>2012</strong>) 554, S. 36–47Heisel, U.; Pfeifroth, T.: Sp<strong>an</strong>ende Bearbeitung von FVK am Institut fürWerkzeugmaschinen. In: CCeV Arbeitsgruppe Bearbeitung, <strong>2012</strong>Heisel, U.; Pfeifroth, T.: Influence of Point Angle on Drill Hole Quality <strong>an</strong>d Machining ForcesWhen Drilling CFRP. In: Proceedings of the 5th CIRP Conference on High Perform<strong>an</strong>ceCutting, <strong>2012</strong>, S. 471–476Heisel, U.; Schnei<strong>der</strong>, M.; Pfeifroth, T.: Sp<strong>an</strong>ende Bearbeitung von CFK-Werkstoffen. In:LMT-Kompetenztage Composites & Plastics, <strong>2012</strong>Heisel, U.; Schnei<strong>der</strong>, M.; Pfeifroth, T.: Schädigungsmech<strong>an</strong>ismen in <strong>der</strong> sp<strong>an</strong>endenBearbeitung von CFK. In: Lightweight Design 5 (<strong>2012</strong>) 3, S. 52–55112
- Seite 6 und 7:
Erfolgsfaktoren Eigenverantwortung,
- Seite 8 und 9:
methodische und organisatorische L
- Seite 11 und 12:
werden kann, auch wenn zwischenzeit
- Seite 15 und 16:
Abb. 6 Verteilung der Themen (Erstb
- Seite 17 und 18:
Ausgehend von dieser Skizzierung la
- Seite 19 und 20:
Bis 10/2012 sind 4 Promovierende au
- Seite 21 und 22:
Forschungsstand ausgewählter Proje
- Seite 23 und 24:
Ziel des Forschungsprojekts ist ein
- Seite 25 und 26:
ZusammenfassungTurbulente Märkte f
- Seite 27 und 28:
welche Chancen sich für die Untern
- Seite 29 und 30:
Belastungssituation zu ermöglichen
- Seite 31 und 32:
3.2. Cluster B - Digitales und Virt
- Seite 33 und 34:
zulassen. Dies stellt dann jeweils
- Seite 35 und 36:
interner Ablauf wird dargestellt, d
- Seite 37 und 38:
können. Damit erhöht sich insgesa
- Seite 39 und 40:
Forschungsstand ausgewählter Proje
- Seite 41 und 42:
ZusammenfassungUnterstützung von f
- Seite 43 und 44:
Die Anforderungen an heutige Untern
- Seite 45 und 46:
Ausgehend von der Analyse des aktue
- Seite 47 und 48:
ZusammenfassungPersonalkosten über
- Seite 49 und 50:
3.3. Cluster C - Material- und Proz
- Seite 51 und 52:
Tabelle mit Übersicht der aktuelle
- Seite 53 und 54:
des EXIST-Programms, welches neue,
- Seite 55 und 56:
Prozessentwicklung - entlang der Pr
- Seite 57 und 58:
ThemaC5: Werkzeugintegrierte optisc
- Seite 59 und 60:
Carbonfaserverstärkter Kunststoff,
- Seite 61 und 62:
Schnittgeschwindigkeiten positiv au
- Seite 63 und 64: zu fügen. Neben dem fokussierten L
- Seite 65 und 66: den erfolgsentscheidenden Bereichen
- Seite 67 und 68: die Erschließung neuer Differenzie
- Seite 69 und 70: Verknüpfung von Systemen, die die
- Seite 71 und 72: Aufeinandertreffen von Netzwerkpart
- Seite 73 und 74: Abb. 15: Prozess-Dashboard für Wer
- Seite 75 und 76: produktionsspezifischen operativen
- Seite 77 und 78: ThemaE3: Störungsunempfindliche In
- Seite 79 und 80: Das Ziel des Forschungsprojekts ist
- Seite 81 und 82: Forschungsstand ausgewählter Proje
- Seite 83 und 84: ZusammenfassungCompetitive Differen
- Seite 85 und 86: Tabelle mit Übersicht der aktuelle
- Seite 87 und 88: Forschungsstand ausgewählter Proje
- Seite 89 und 90: thermokinetischen Spritzverfahren m
- Seite 91 und 92: Energieeinsparpotenzial in der Rege
- Seite 93 und 94: Ein methodengeleitetes Vorgehen, we
- Seite 95 und 96: Use-Ansätze stellen komplexe, nich
- Seite 97 und 98: Cluster C - Material- und Prozessen
- Seite 99 und 100: Im Rahmen dieser Arbeit wird ein In
- Seite 101 und 102: Bei der Implementierung einer Erwei
- Seite 103 und 104: [MSM11, SMM11]. Deshalb sind weiter
- Seite 105 und 106: eteiligten Akteure aus den Unterneh
- Seite 107 und 108: Der Doktorand der GSaME, Dipl.-Ing
- Seite 109 und 110: akad. Titel, Name Institut Forschun
- Seite 111 und 112: 8. GSaME-Tagung „Wissen, Technolo
- Seite 113: 9. PublikationenCluster A - Stuttga
- Seite 117 und 118: Klaiber, M.; Rockstroh, L.; Wang, Z
- Seite 119 und 120: Dietrich, J.; Becker, F.; Kast, G.;
- Seite 121 und 122: werden. Mit ihnen setzte sich Herr
- Seite 123 und 124: 12. Ausblick nach 10/2012Die GSaME
- Seite 125 und 126: Themenauswahl:Das Leitmodell der vi
- Seite 127 und 128: Vorgehensweisen einer integrierten
- Seite 129 und 130: Die Ausschreibung der Themen wurde