Yalelift 360 ATEX - Carl Stahl

Weitere Magazine

Empfehlungen

Info

an elongation of 5 % (Fig. 13) over a pitch´pn´, or an elongation of 3 % over 11 pitches(11 x pn). The nominal values and wear limitsare given in table 2. When exceeding one of thelimit values, the load chain has to be replaced.Chain stop inspectionThe chain end stop must be connected to thefree (idle) chain strand (Fig. 11). Abrasionresp. false position must not be available.Chain reeving inspectionBottom blockAll units equipped with two or more chain falls,should be inspected prior to being put intooperation for twisted or kinked chains. Thechains of multiple fall hoists may be twistedif the bottom block was turned over (Fig. 9).The load chain has to be installed correctlyaccording to illustration (Fig. 10). Hereby thewelds of the standing links must face awayfrom the load sheave.Make sure that load chains are installed whichhave been approved by the manufacturer only.In case of non-compliance the warranty will bevoid with immediate effect.Inspection of load brake (Fig. 15)In case of irregularities (e.g. bloomed coolingelement, loosened friction discs) consult themanufacturer immediately.All brake components must be inspected forwear, damage, staining by overheating andfunction. Friction discs must be kept cleanfrom oil and grease as well as water and dirt.The bonding of the friction discs has to bechecked.The brake adjustment should be made inaccordance with the maintenance instructionno. 09900490/09.2006.Works surveyEvery 3 years each unit should be examinedby Yale Industrial Products GmbH. This inspectionincludes the complete disassembly of theunit and the perfect inspection of all components.Non-compliance with this inspection byYale Industrial Products GmbH will render the<strong>ATEX</strong> declaration of conformity nil and void.Inspections and the compliance withthe inspection intervals are theresponsibility of the user.8
DGBBestimmungsgemäße VerwendungCorrect operationFig. 1SDGBSachwidrige Verwendung (Beispiele)Incorrect operation (Examples)Fig. 2 Fig. 3 Fig. 4Fig. 5Fig. 6 Fig. 7 Fig. 8Fig. 99
Seite 2 und 3: DGBDeutschSeite 2Page 5DVorwortDies
Seite 4 und 5: Senken der LastDurch Ziehen an der
Seite 6 und 7: cast iron against aluminium, magnes
Seite 10 und 11: DGBKettenverlaufChain reevingYaleli
Seite 12 und 13: DGBTypenschidName plateModell / Mod
Seite 14 und 15: Modell / Model / Modèle Yalelift 3
Seite 16 und 17: Nominalwerte und Verschleißgrenzen
Seite 18 und 19: Translation of the original Declara
Seite 20: GermanyColumbus McKinnonIndustrial

Yalelift 360 ATEX - Carl Stahl

Erfolgreiche ePaper selbst erstellen

Template löschen?

Als Template speichern?