Kühlmitteltemperaturgeber [G62] - audidrivers • 'DAS'

Distance from G28 to ring gear greater than 3/64 inchBroken teeth on flywheel ring gearG28 RPM sensor malfunctioningOpen or short circuitDefective sensor & cables, metal fragments on flywheel teethDebris on G28Connector on G28 swapped with connector on G4.ECM malfunctioning2112Crankshaft Position Sensor (CKP) (G 4)No change in signal or mechanical malfunctionSensor is not detecting flywheel pinFlywheel pin damaged or missing,Sensor in not installed correctlyDistributor hall sensor out of adjustment2113Camshaft Position Sensor (G 40)No change in signalOpen circuit or short circuit to positiveSignal to positiveShort circuit to groundSignal to groundMechanical malfunction, hall sender defectiveFaulty basic setting, or distributor alignmentCambelt has jumped a toothIf 1551/1552 Shows sporadic disregard2114Hall Sensor (G 40)Hall sensor not at reference mark2121Closed throttle position switch (CTP) (F 60)Usually Part of Idle/Full Throttle Switch Assembly