Bedienungsanleitung - in der support-zone

PC Mode Menu SystemSee “Connecting the LCD TV to a PC” section forconnecting a PC to the TV set.For switching to PC source, press “SOURCE” buttonon your remote control and select PC input. You canalso use “Source” menu to switch to PC mode.Note that PC mode menu settings are available onlywhile the TV is in PC source.PC Position MenuSelect the first icon by pressing “ ” or“ ” button. PC Position menu appears on thescreen:AutopositionIf you shift the picture horizontally or vertically to anunwanted position, use this item to put the pictureinto correct place automatically. This setting thereforeautomatically optimizes the display.Select Autoposition item by using “ ” or “ ” buttons.Press OK or “ ”, “ ” button.Warning: Please ensure auto adjustment isperformed with a full screen image to ensurebest results.H (Horizontal) PositionThis item shifts the image horizontally to right handside or left hand side of the screen.Select H Position item by using “ ” or “ ” button.Use “ ” or “ ” button to adjust the value.V (Vertical) PositionThis item shifts the image vertically towards the topor bottom of the screen.Select V Position item by using “ ” or “ ” button.Use “ ” or “ ” button to adjust the value.PhaseDepending on the resolution and scan frequency thatyou input to the TV set, you may see a hazy or noisypicture on the screen. In such a case you can use thisitem to get a clear picture by trial and error method.Select Phase item by using “ ” or “ ” buttons. Use“ ” or “ ” button to adjust the value.Dot ClockEnglish - 76 -Dot Clock adjustments correct the interferencethat appear as vertical banding in dot intensivepresentations like spreadsheets or paragraphs ortext in smaller fonts.Select Dot Clock item by using “ ” or “ ” buttons.Use “ ” or “ ” button to adjust the value.PC Picture MenuFor adjusting PC picture items, do the following: Press“ ” or “ ” button to select the second icon. PC Picturemenu appears on the screen.Brightness, Contrast, Colour and ColourTemperature settings in this menu are identical tosettings de ned in TV picture menu under “AnalogueTV Menu System”.Note: If you set Colour Temp as User, you can de neR, G, B settings manually.Sound,Feature and Source settings are identical tothesettings explained in Analog Tv menu system.Displaying TV InformationProgramme Number, Programme Name, SoundIndicator and Zoom Mode information is displayedon the screen when a new programme is entered orINFO button is pressed.Mute FunctionPress “ ” button to disable sound. Mute indicator willbe displayed in the upper side of the screen.To cancel mute, there are two alternatives; the rstone is pressing the “ ” button and the second oneis increasing the volume level.PIP (Picture-in-Picture) andPAP (Picture-and-Picture)ModesPress the “PIP” button once to switch to PIP mode.At PIP Mode, a small picture (PIP picture) is displayedon the main picture. There are 1 size and 4 positions(upper left, upper right, bottom left and bottom right)available for the PIP window.When PIP Mode is entered, the default active windowis the PIP window and the active window is indicatedby a yellow frame around it. The active window canbe changed by pressing “ ” or “ ” button. The statusinfo OSD belongs to active window. The place of thestatus OSDs are same for both windows.Press the “PIP” button again to activate PAP mode.At PAP Mode, two pictures with equal sizes aredisplayed on the screen. Aspect Ratios of the windowsare xed.