Bedienungsanleitung - in der support-zone

Using “ ” or “ ” button, you can switch to PIP, PAPmode or turn off the feature.If the TV is switched to PIP or PAP mode, Pip-Papsubmenu will change accordingly and the followingsettings will appear on the same menu screen.Note that if you switch to PAP mode by using Pip-Papsetting, only Source and Swap options will be activeamong the menu settings.Pip-PapThis line controls Pip/Pap modes. Use “ ” or “ ”buttons to switch the TV to Pip, Pap or Off.Pip SizeUsing this setting, you can set the size of the Pipwindow. Press “ ” or “ ” button to highlight PipSize item. Use “ ” or “ ” button to set Pip Size toSmall or Large.Note: This setting will be inactive if the TV is set toPap mode.PIP PositionThis setting is used for moving the sub picture.Select PIP Position item by using “ ” or“ ” button. Use “ ” or “ ” button to adjust PIPposition.Positions available are: Bottom Right,Bottom Left, TopLeft and Top Right.SourcePIP Source setting enables you to select the sourceof the sub picture.Select PIP Source item by using “ ” or “ ” button.Use “ ” or “ ” button to set PIP source.ProgramThis setting will be unavailable to be used.SwapSelect Swap item by using “ ” or “ ” button. Use “” or “ ” button to set. This function enables to swapbetween the main and the PIP picture.Note: See Appendix E for all PIP/PAP modes.Sleep TimerPress “ ” or “ ” button to select Sleep Timer. Use“ ” or “ ” button to set the Sleep Timer.The timer can be programmed between Off and 120minutes in steps of 10 minutes.If Sleep Timer is activated, at the end of the selectedtime, the TV goes automatically to standby mode.Child LockPress “ ” or “ ” button to select Child Lock.Use “ ” or “ ” button to set the Child Lock On or Off.When On is selected, the TV can only be controlledby the remote control handset. In this case the controlEnglish - 73 -panel buttons (except for the STANDBY button) willnot work.Hence, if one of those buttons is pressed, Child LockOn will be displayed on the screen when the menuscreen is not visible.LanguagePress “ ” or “ ” button to select Language. Use “” or “ ” button to select the Language.Default ZoomWhile zoom mode is set as AUTO, the TV will setthe zoom mode in accordance with the signal ofthe broadcast. If there is no WSS or aspect ratioinformation, the TV will then use this setting to adopt.Press “ ” or “ ” button to select Default Zoom. Youcan set Default Zoom to Panoramic, 16:9, 4:3 or14:9 by pressing “ ” or “ ” button.Note : Default Zoom feature will not be available whilein Digital Tv mode.Blue BackgroundIf the signal is weak or absent, the TV will automaticallychange to a blue screen. To enable this, set BlueBackground to On.By pressing “ ” or “ ” button, select BlueBackground. Press “ ” or “ ” button to set BlueBackground as On or Off.Menu Background (optional)Press “ ” or “ ” button to select Menu Background.You can set menu background level by pressing “” or “ ” button.Power Save ModeUse “ ” or “ ” button to select Power Save Mode.Press “ ” or “ ” button to set Power Save Mode asOn or Off.See the section, “Environmental Information” inthis manual for further information on Power SaveMode.Note : Backlight function will be invisible if Power SaveMode is set to on.BacklightThis setting controls the backlight level. SelectBacklight by pressing “ ” or “ ” button. Press“” or “ ” button to set Backlight to Auto, Medium,Maximum or Minimum.Menu TimeoutTo set a speci c display timeout for menu screens,set a value for this option.Press “ ” or “ ” button to select Menu Timeout. Use“ ” or “ ” button to change menu timeout to 15 sec,30 sec or 60 sec.