Bedienungsanleitung - in der support-zone

ResetPress “ ” or “ ” button to select Reset. Press“ ” or “ ” or OK button to reset the picture modes tofactory default settings.StorePress “ ” or “ ” button to select Store. Press “ ”or OK button to store the settings. “Stored...” will bedisplayed on the screen.Sound MenuVolumePress “ ” or “ ” button to select Volume. Press “ ”or “ ” button to change the level of the Volume.EqualizerPress “ ” or “ ” button to select Equalizer. Press “” button to view equalizer menu.Press “ ” or “ ” button to change the preset. Inequalizer menu, the preset can be changed to Music,Movie, Speech, Flat, Classic and User.Select the desired frequency by pressing “ ” or “ ”button and increase or decrease the frequency gainby pressing “ ” or “ ” button.Press the “MENU” button to return to the previousmenu.Note: Equalizer menu settings can be changed onlywhen the Equalizer Mode is in User.BalanceThis setting is used for emphasizing left or rightspeaker balance.Press “ ” or “ ” button to select Balance. Press “” or “ ” button to change the level of the balance.Balance level can be adjusted between -32 and +32.HeadphonePress “ ” or “ ” button to select Headphone. Press“ ” button to view the headphone menu.Headphone sub-menu options are described below:VolumePress “ ” or “ ” button to select Volume. Press “” button to increase headphone volume level. Press“ ” button to decrease headphone volume level.Headphone volume level can be adjusted between0 and 63.Headphone Sound (optional)Press “ ” or “ ” button to select Headphone Sound.Using “ ” or “ ” button, you can select Main, PIP/PAP,Active or Inactive.Main: Main window sound.PIP/PAP : PIP/PAP window sound.ActiveInactive: Sound of the current selection.: Sound of the currently inactive window.Sound Mode (optional)Press “ ” or “ ” button to select Sound Mode. Using“ ” or “ ” button, you can select Mono, Stereo, Dual Ior Dual II mode, only if the selected channel supportsthat mode.AVLAutomatic Volume Limiting (AVL) function adjusts thesound to obtain xed output level between programmes(For instance, volume level of advertisements tend tobe louder than programmes).Press “ ” or “ ” button to select AVL. Press “ ” or“ ” button to set the AVL as On or Off.SRS TruSurr XT (optional)By pressing “ ” or “ ” select SRS TruSurr XT.Press “ ” or “ ” button to set SRS TruSurr XT ason or off.Note: If you set SRS TruSurr XT as On, some featuresin the Sound menu can be unavailable to be set.English - 71 -