Bedienungsanleitung - in der support-zone

Disabled: All menus are unlocked.All Menus: All menus are accessible only with thecorrect lock key. So the user cannot add, delete,rename or move the channels and cannot set thetimers.Installation Menu: Installation menu is locked, so theuser cannot add channels. Changes will be updatedafter exiting Con guration Menu.Set PINUse “ ” or “ ” buttons to go to “Set PIN” option.Press OK to display the “Set PIN” window. Usenumeric buttons to enter new pin number you will needto input your new pin a second time for veri cationpurposes. The factory default pin number is 0000, ifyou change the pin number make sure you write itdown and keep it safe.Time Settings(**)(**): Time setting will not be available for UK.In the con guration menu, highlight the Time Settingsitem by pressing “ ” or “ ” buttons. Press OK andTime Settings sub menu will be displayed on thescreen:Use “ ” or “ ” buttons to highlight the Time ZoneSetting. Time Zone Setting is set using “ ” or “ ”buttons. It can be set to AUTO or MANUAL. WhenAUTO is selected, Current Time and Time Zoneoptions will not be available to be set.If MANUAL option is selected as the Time ZoneSetting, Time Zone can be altered:• By pressing “ ” or “ ” buttons select Time Zone.Use “ ” or “ ” buttons to change the Time Zonebetween GMT-12 or GMT+12. Current Time on thetop of the menu list will then change according tothe selected Time Zone.Receiver UpgradeOver Air Download (OAD)To ensure that your TV always has the most up to dateinformation, use this setting. Please ensure that the TVis set to standby mode. The TV automaticallypowers up at 3.00 A.M. each day and searches forany new information which may be broadcast andwill download this to your receiver automatically. Thisoperation will normally take approximately 30 minutes.If you have an important recording to be carried out at3.00 A.M. and you do not want to interrupt it, disableauto OAD search by performing the following:• Press MENU button and using the “ ” or “ ” buttonsto choose Setup and press OK button.English - 64 -• Highlight Con guration menu with “ ” or “ ” keysand press OK.• Use “ ” or “ ” buttons to choose “RECEIVERUPGRADE” and press OK button.• Using the “ ” or “ ” button change “Automaticscanning” from Enabled to Disabled.• Highlight “Scan for upgrade” menu with “ ” or “”keys and pres OK to commence upgrade.• After the search progress is completed, the message“ Completed searching for upgrade. No new softwarewas found” appears on the screen if no new softwareis found.Dolby Digital (Optional)In the Con guration Menu, highlight the Dolby Digitalitem by pressing “ ” or “ ” buttons. Use the “ ” or “” buttons to set the Dolby Digital as On or Off. If thechannel that you are watching supports Dolby Digital,you can turn this setting on.Hard of Hearing (*)Use “ ” or “ ” button to select Hard of Hearing andthen press “ ” or “ ” button to set this setting asOn or Off.If the broadcaster enables any special signalconcerning the audio, you can set this setting as Onto receive such signals.(*) Hard of Hearing function will not be available for UK.Channel ListUse “ ” or “ ” buttons to go to Channel List option.Use or buttons to toggle Channel List Mode. If youselect “TV Only”, with the “ ” or “ ” buttons, younavigate through only TV channels. If you select“Radio Only”, with the “ ” or “ ” buttons, younavigate through only radio channels. If you select“Text Only”, with the “ ” or “ ” buttons, you navigatethrough only text channels. If you choose “Show All”all channels can be navigated. To save the recentchanges and exit; press the MENU button.Digital Audio OutUse this setting to de ne digital audio out signaltype. Use “ ” or “ ” buttons to set Digital audio outas Compressed (AC3) or PCM. If your selectedchannel includes compressed sound stream, youshould connect your TV to external equipment byusing Spdif out of your TV for enabling the soundoutput. If you have no external sound equipment,