Bedienungsanleitung - in der support-zone

a component audio cable as illustrated below. Whenthe connection is made, switch to YPbPr source.See, “Input selection” section.• You may also connect through the SCART 1 orSCART 2. Use a SCART cable as shown below.Note: These three methods of connection perform thesame function but in different levels of quality. It is notnecessary to connect by all three methods.Connecting Other Equipmentvia ScartMost devices support SCART connection. You canconnect a; DVD recorder, a VCR or a decoder to yourLCD TV by using the SCART sockets. Note that cablesshown in the illustration are not supplied.Power off both the TV and the devices before makingany connections.For more information, refer to your device’s owninstruction book.Using Side AV ConnectorsYou can connect a range of optional equipmentto your LCD TV. Possible connections are shownbelow. Note that cables shown in the illustration arenot supplied.• For connecting a camcorder, connect to the VIDEOIN socket and the AUDIO SOCKETS. Do not connectthe camcoder to VIDEO IN socket at the same timesince it can cause noise in the picture. For selectingthe related source, see the section “Input selection”in the following parts.• To listen to the TV sound from headphones, connectto the HEADPHONE jack of theTV.Input SelectionOnce you have connected external systems to yourTV, you can switch to different input sources.• Press “SOURCE” button on your remote control fordirectly changing sources.or,• Select “Source” option from the main menuby using “ ” or “ ” button. Use then “ ” or“ ” button to highlight an input and press “ ” buttonto select.Note: You can mark desired source options bypressing the OK button. Therefore, when “SOURCE”button is pressed, only the marked source options willbe available (except for the TV source).English - 57 -