GelenktechnikJoint technologyDie Längenangabe bei Winkelgelenken undKugelpfannen wird von Mitte Kugelpfanne bisEnde Gewinde gemessen.The length specification by angle joints and ballsockets are measured by center ball pin to endthread.Die Schlitzlänge bei Gabelgelenken undGabelköpfen wird von Mitte Bolzenbohrung bisEnde Schlitz gemessen.The slot length with forked joints and fork headsare measured by center pin drilling to end slot.WinkelgelenkeKugelpfannenKugelzapfen und ZubehörGabelgelenkeGabelköpfeGabelgelenkbolzen und Zubehörangle jointsball socketsball pins and accessoriesfork jointsfork headsfork joints and accessorieswww.schmitter-hydraulik.de · kontakt@schmitter-hydraulik.de
Winkelgelenkeangle jointsDIN 71802Werkstoff: Stahl, verzinktAusführung CS mit Gewindezapfen und Schlüsselfläche, Sechskantmutter und SicherungsbügelDIN 71802material: steel, zinc-platedconstruction CS with spigots and flat, hexagon nut and locking strapGewinde Pfannethread socketGewinde Zapfenthread pinKugel-Øball-ØmmLängelengthmmDINBezeichnungdescriptionArt.-Nr.M 5X0,80 M 5X0,80 8 22 CS 8 WG 5 S 220 125M 6X1,00 M 6X1,00 10 25 CS 10 WG 6 S 220 126M 8X1,25 M 8X1,25 13 30 CS 13 WG 8 S 220 128M 10X1,50 M 10X1,50 16 35 CS 16 WG 10 S 220 130M 12X1,75 M 12X1,75 16 35 CS 16 WG 12 S 220 132M 14X1,50 M 14X1,50 19 45 CS 19 WG 14 S 220 134M 14X2,00 M 14X2,00 19 45 CS 19 WG 14X2 S 220 135M 16X2,00 M 16X2,00 19 45 CS 19 WG 16 S 220 136Winkelgelenkeangle jointsDIN 71802 mit LinksgewindeWerkstoff: Stahl, verzinktAusführung CS mit Gewindezapfen und Schlüsselfläche, Sechskantmutter und SicherungsbügelDIN 71802 with left-hand threadmaterial: steel, zinc-platedconstruction CS with spigots and flat, hexagon nut and locking strapGewinde Pfannethread socketGewinde Zapfenthread pinKugel-Øball-ØmmLängelengthmmBezeichnungdescriptionArt.-Nr.M 5X0,80 links M 5X0,80 8 22 WG 5 S links 220 225M 6X1,00 links M 6X1,00 10 25 WG 6 S links 220 226M 8X1,25 links M 8X1,25 13 30 WG 8 S links 220 228M 10X1,50 links M 10X1,50 16 35 WG 10 S links 220 230M 12X1,75 links M 12X1,75 16 35 WG 12 S links 220 232M 14X1,50 links M 14X1,50 19 45 WG 14 S links 220 234M 16X2,00 links M 16X2,00 19 45 WG 16 S links 220 236Winkelgelenke DCangle joints DCfür Daimler-Chrysler NutzfahrzeugeWerkstoff: Stahl, verzinkt/Nylonfor Daimler-Chrysler motor vehiclesmaterial: steel, zinc-plated/nylonGewinde Pfannethread socketGewinde Zapfenthread pinKugel-Øball-ØmmLängelengthmmBezeichnungdescriptionArt.-Nr.M 8X1,25 M 8X1,25 13 56 WG 8 S DB 220 155M 10X1,50 M 10X1,50 16 45 WG 10 S lang 220 156M 8X1,25 M 8X1,25 13 56 WG 8 DB Nylon 220 157<strong>Schmitter</strong> <strong>Hydraulik</strong> GmbH · 97450 Arnstein · Tel.: +49 (0) 9363/60-0 · Fax: 60-14