Numerische Optimierung dreidimensional parametrisierter ...

[12] Dennis, B. H.; Dulikravich, G. S.; Han, Z.-X.: Constrined Shape of Optimization of AirfoilCascades using a Navier-Stokes Solver and a Genetic/SQP Algorithm.ASME 99-GT-441, 1999.[13] Denton, J. D.: Loss Mechanisms in Turbomachines.ASME 93-GT-435, 1993.[14] Denton, J. D.: Designing in Three Dimensions.AGARD Lecture Series "Turbomachinery Design Using CFD", No. 195, 1994.[15] Doerffler, P. P.; Amecke, J.: Secondary Flow Control and Streamwise Vortices Formation.ASME 94-GT-376, 1994.[16] O’Donnell, F. K.; Davies, M. R. D.: Turbine Blade Entropy Generation Rate, Part II:The Measured Loss.ASME 2000-GT-266, 2000.[17] Dossena, V.; Perdichizzi, A.; Savini, M.: The Influence of Endwall Contouring on thePerformance of a Turbine Nozzle Guide Van.ASME 98-GT-71, 1998.[18] Duden, A.: Strömungsbeeinflussung zur Reduzierung der Sekundärströmungen in Turbinengittern.Dissertation, Universität der Bundeswehr München, 1999.[19] Duden, A.; Fottner, L.: The Secondary Flow Field of a Turbine Cascade with 3D AirfoilDesign and Endwall Contouring at Off-Design Incidence.ASME 99-GT-211, 1999.[20] Duden, A.; Raab, I.; Fottner, L.: Controlling the Secondary Flow in a Turbine Cascadeby 3D Blade Design and Endwall Contouring.ASME 98-GT-72, 1998.[21] Egartner, W.: Formoptimierung von Verdichter- und Turbinenschaufeln.Erfolgskontrollbericht AG Turbo 1, Turbotech 2, Vorhaben 1.111, 1999.[22] Ferziger, J. H., Péric, M.: Computational Methods for Fluid Dynamics,Springer Verlag, 1997.111