Bedienungsanleitung - in der support-zone

Conguring Source SettingsYou can enables or disable selected source options.The TV will not switch to the disabled source optionswhen “SOURCE” button is pressed.menu, there are two options regarding to satcodxfeature as in the following:• Select Sources in the Settings menu and pressOK button.• Press“ ” or “ ” buttons to select a source.• Use “ ” or “ ” button to enable or disable theselected source. Changes are automaticallystored.Conguring Satellite SettingsSelect Satellite settings in the Settings menu tocon gure satellite settings. Press OK button.You can download or upload satcoDX data. In orderto perform these functions supported for satcodxfeature, a USB device must be connected to the TVin the rst place.You will be able to upload current services and relatedsatellites & transponders in TV, to a USB device witha le named “mb70_sdx.sdx “.In addition to the uploading feature you will beable to download one of the satcodx les stored inUSB device, to the TV. When download option isselected, a list of satcodx les stored in USB devicewill displayed.When you select one of these satcodx files, allservices and related satellites and transponders inthe selected le will be stored in TV. If there are anyinstalled terrestrial, cable and/or analog services,they will be kept and only satellite services will beremoved.Afterwards, check your antenna settings and makechanges if necessary. An error message stating “NoSignal” may be displayed if antenna settings are notcon gured properly.Satellite List: To view available satellite list, pleaseselect Satellite list option from satellite settings menu.If you want to add new satellite information, pleasepress YELLOW button. If you want to change satellitename, please use the navigation buttons. To deletea satellite from list, press BLUE button or press OKto edit.Antenna Installation: In this section, you canchange antenna settings and scan satellite for newchannels.SatcoDX (optional): You can perform SatcoDXoperations using the Satelite Settings. On SatcoDXEnglish - 80 -