Bedienungsanleitung - in der support-zone

If you start Digital Aerial scan process, automaticscanning will start. You can press “MENU” buttonto cancel.If you start Digital Cable scan process, the followingscreen will be displayed.You can select frequency ranges from this screen. Forhighlighting lines you see, use “ ” or “ ” button. Youcan enter the frequency range manually by using thenumeric buttons on the remote control. Set Start andStop Frequency as desired by using numeric buttonson the remote control. After this operation, you can setSearch Step as 8000 KHz or 1000 KHz. If you select1000 KHz, the TV will perform search process in adetailed way. Searching duration will thus increaseaccordingly. When nished, press OK button to startautomatic search. Automatic searching screen will bedisplayed during the process.Note: If you select an extended gap between Startand Stop frequency rate, automatic search durationwill take a longer time.Analog Fine Tune• Select Analog Fine Tune from the Installation menuby using “ ” or “ ” and OK buttons. Analog FineTune screen will be displayed. Analog Fine Tunefeature will not be available if there are no analogchannels, digital channels and external sourcesstored.• Press OK button to proceed. Use “ ” or “ ” buttonto set Fine Tune. When nished, press OK buttonagain.First Time InstallationIf you want to delete all channels and settings pleaseselect First Time Installation and press OK. TheTV’s memory will be deleted and installation progressstarts.Clear Service List (*)(*) This setting is visible only when the Country optionis set to Denmark, Sweden, Norway or Finland.Use this setting to clear channels stored. Press “” or “ ” button to select Clear Service List and thenpress OK. The following OSD will be displayed onthe screen:Select YES and press OK to continue or select NOand press OK button to cancel.Managing Stations: Channel ListThe TV sorts all stored stations in the Channel List.You can edit this channel list, set favourites or setactive stations to be listed by using the Channel Listoptions.• Press “ MENU” button to view main menu. SelectChannel List item by using “ ” or “ ” button. PressOK to view menu contents.Select Edit Channel List to manage all storedchannels. Use “ ” or “ ” and OK buttons to selectEdit Channel List.Channel List TypesYou can set channel list type function to displaydesired types of available channels.RED: Lists only digital aerial and analoguebroadcasts.GREEN: Lists only digital cable and analoguebroadcasts.YELLOW: Lists only satellite and analoguebroadcasts.OK: Watch selected.MENU: Exits.BLUE: Displays ltering options.English - 69 -