Bedienungsanleitung - in der support-zone

Manual TuningHINT: This feature can be used for direct broadcastentry. You should select satellite before startingmanual search. Satellite settings menu is located inthe settings menu.• Select Manual Channel Scan from the Installationmenu by using “ ”/“ ” and OK buttons. ManualScan options screen will be displayed.• Select the desired Search Type using “ ” or “” button. Manual search options will changeaccordingly. Use “ ”/“ ” button to highlight an itemand then press “ ” or “ ” button to set an option.You can press “MENU” button to cancel.Digital Aerial Manual SearchSatellite Manual SearchIn satellite manual scan, you can enter frequency,polarization, symbol rate, network channel scanand satellite options. You can then press OK buttonto search. When the channel is located, any newchannels that are not on the list will be stored.Note: Frequency, polarization and symbol rate maychange in accordance with the selected channels.Analogue Manual SearchIn manual channel scan, the number of the multiplexor frequency are entered manually and only thatmultiplex or frequency are searched for the channels.After selecting search type as Digital Aerial, you canenter the multiplex or frequency number using thenumeric buttons and press OK button to search.Digital Cable Manual SearchIn cable manual scan, you can enter frequency,modulation, symbol rate and network channel scanoptions. After selecting search type as Digital Cable,you can set the desired options and press OK buttonto search.After selecting search type as analogue, you can use“ ”/“ ” button to highlight an item and then press “” or “ ” button to set an option.Enter the channel number or frequency using thenumeric buttons. You can then press OK buttonto search. When the channel is located, any newchannels that are not on the list will be stored.Network Channel ScanSelect Network Channel Scan from the installationmenu by using “ ” or “ ” and OK buttons. NetworkChannel Scan selection screen will be displayed.Select Digital Aerial or Digital Cable and pressOK button to continue. The following message willbe asked. Select Yes to continue or select No tocancel.English - 68 -