Bedienungsanleitung - in der support-zone

• Press OK button on the remote control to continueand the following message will be displayed on thescreen:Note: You can press “MENU” button to cancel.• After all the available stations are stored, ChannelList will be displayed on the screen. If you like thesort channels, according to the LCN, please select“Yes” and than press “OK”.If you select CABLE option and press OK button onthe remote control to continue, the following messagewill be displayed on the screen:To continue please select YES and press OK. Tocancel operation, select NO and press OK.• Press OK button to quit channel list and watch TV.If you select Satellite option from the Search Typescreen, you can set a satellite and watch satellitechannels.There are three types of antenna selection. You canselect Antenna type as Direct, Unicable or DiSEqCswitch by using “ ” or “ ” buttons.You can select frequency ranges from this screen. Forhighlighting lines you see, use “ ” or “ ” button. Youcan enter the frequency range manually by using thenumeric buttons on the remote control. Set Start andStop Frequency as desired by using numeric buttonson the remote control. After this operation, you can setSearch Step as 8000 KHz or 1000 KHz. If you select1000 KHz, the TV will perform search process in adetailed way. Searching duration will thus increaseaccordingly. When nished, press OK button to startautomatic search.If you select AERIAL option from the Search Typescreen, the television will search for digital terrestrialTV broadcasts.Direct: If you have a single receiver and a directsatellite dish, select this antenna type. After selectingDirect, another menu screen will be displayed.Select an available satellite and press OK to scanfor services.English - 66 -