Bedienungsanleitung - in der support-zone

SatcoDX (optional): You can perform SatcoDXoperations using the Satelite Settings. On SatcoDXmenu, there are two options regarding to satcodxfeature as in the following:You can download or upload satcoDX data. In orderto perform these functions supported for satcodxfeature, a USB device must be connected to the TVin the rst place.You will be able to upload current services and relatedsatellites & transponders in TV, to a USB device witha le named “mb70_sdx.sdx “.In addition to the uploading feature you will beable to download one of the satcodx les stored inUSB device, to the TV. When download option isselected, a list of satcodx les stored in USB devicewill displayed.When you select one of these satcodx files, allservices and related satellites and transponders inthe selected le will be stored in TV. If there are anyinstalled terrestrial, cable and/or analog services,they will be kept and only satellite services will beremoved.Afterwards, check your antenna settings and makechanges if necessary. An error message stating “NoSignal” may be displayed if antenna settings are notcon gured properly.Conguring Network SettingsNote: Your TV’s Network Settings include Wiredand Wireless Connection options. However, if yourTV does not have USB Wi-Fi dongle, you shoulduse Wired Connection type. If you try to connect viaWireless Connection when your TV does not have aUSB Wi-Fi dongle, a warning screen will appear andthe TV will not get an IP address. Try connecting theLAN cable after this and then the TV will be able toget an IP address.Conguring Wired Device Settings• On Network Settings window you can set networktype of the TV set, which connects the TV tothe Internet. If you are connecting the TV viaETHERNET INPUT, select Network Type as WiredDevice to con gure.Setting Network Type• Network type can be selected as Wired or Wirelessdevice, in accordance with the active connectionto the TV set. Select this as Wired if you haveconnected to the TV a LAN cable. Select as Wirelessif you connect via the wireless USB dongle.Setting Conguration Status• This section displays the status of the connection.Select Connected if you want to activate Wired orWireless connection. Select as Not Connected toquit an active connection.IP Address• If an active connection is available, the IP addresswill be displayed on this section. If you want tocon gure IP address preferences, press YELLOWbutton and switch to the advanced mode.Conguring Wired Network Settings inAdvanced ModeAfter pressing YELLOW button, Advanced mode willbe available. Press OK button to edit settings:English - 80 -