Bedienungsanleitung - in der support-zone

6. S/PDIF Digital Out outputs digital audio signals of the currently watched source.Use a digital optic cable to transfer audio signals to a device that has S/PDIF input.7. RF Input/SAT. input connects to an aerial,cable and satellite antenna system.Note that if you use a decoder or a media recorder, you should connect the aerial cable through thedevice to the television with an appropriate antenna cable, as shown in the illustration in the followingpages.8.9.HDMI 3: HDMI InputHDMI 2: HDMI Input10. HDMI 1: HDMI InputHDMI Inputs are for connecting a device that has an HDMI socket. Your LCD TV is capable ofdisplaying High De nition pictures from devices such as a High De nition Satellite Receiver or DVDPlayer. These devices must be connected via the HDMI sockets or Component Socket. These socketscan accept either 720p or 1080p (optional) signals. No sound connection is needed for an HDMI toHDMI connection.11. PC Input is for connecting a personal computer to the TV set.Connect the PC cable between the PC INPUT on the TV and the PC output on your PC12. Ethernet input (for service and Internet connectivity)Viewing the Connections - Side Connectors1. CI Slot is used for inserting a CI card. A CI card allows you to view all thechannels that you subscribe to. For more information, see “ConditionalAccess” section.2.3.Side USBsSide HDMI Input is for connecting a device that has an HDMI socket.4. Headphone jack is used for connecting an external headphone to thesystem. Connect to the HEADPHONE jack to listen to the TV fromheadphones (optional).5. Side audio-video connection input is used for connecting video and audiosignals of external devices. To make a video connection, you must use thesupplied AV connection cable for enabling connection. First, plug singularjack of the cable to the TV’s Side AV socket. Afterwards, insert your videocable’s (not supplied) connector into the YELLOW input (located on theplural side) of the supplied AV connection cable. Colours of the connectedjacks should match.To enable audio connection, you must use RED and WHITE inputs ofthe side AV connection cable. Afterwards, insert your device’s audiocable’s connectors into the RED and WHITE jack of the supplied side AVconnection cable. Colours of the connected jacks should match.Note: You should use audio inputs of side AV connection cable (RED& WHITE) to enable sound connection when connecting a device to your TV by using PC orCOMPONENT VIDEO input.English - 59 -