Produktkatalog [2003-02] - SPM Instrument
Produktkatalog [2003-02] - SPM Instrument
Produktkatalog [2003-02] - SPM Instrument
Sie wollen auch ein ePaper? Erhöhen Sie die Reichweite Ihrer Titel.
YUMPU macht aus Druck-PDFs automatisch weboptimierte ePaper, die Google liebt.
Condmaster ® Pro 3<br />
Condmaster ® Pro 3 is a comprehensive condition monitoring<br />
and predictive maintenance program.<br />
Condmaster ® Pro:<br />
• stores data and evaluates measuring results from all<br />
<strong>SPM</strong> instruments for periodic bearing condition,<br />
including <strong>SPM</strong> spectrum, EVAM ® vibration analysis, and<br />
ISO 10816 vibration severity measurements.<br />
• communicates with all <strong>SPM</strong> data logging instruments.<br />
• controls the CMS System for continuous condition<br />
monitoring.<br />
• handles analogue signals in voltage and current for any<br />
customer defined quantity.<br />
• administers measuring, lubrication, inspection, and<br />
other maintenance routines.<br />
• contains a bearing catalogue and the program<br />
LUBMASTER to simulate bearing life expectancy under<br />
various lubrication conditions.<br />
• has a user defined graphical display of the measuring<br />
point locations with alarm flags and colour coded<br />
condition messages.<br />
Condmaster ® Pro 3 stores basic data on machines and measuring<br />
points, using a customer defined numbering system.<br />
Each measuring point can be set up for shock pulses, vibration<br />
severity, vibration analysis, temperature, two customer<br />
defined measurements, constant or measured machine<br />
speed, a lubrication check plus one other condition check.<br />
The number of measuring points is only limited by hard disk<br />
capacity. Work descriptions can be attached to individual<br />
points, to monitoring routes, and to work orders. The program<br />
produces time based work orders and check lists as<br />
well as alarm lists and graphic displays of measuring results.<br />
Condmaster ® Pro 3 is available for single users and for networks<br />
(Windows compatible). It has functions for data import<br />
and export. The program works under Windows NT,<br />
2000, XP (also 95, 98 and ME for single user PC) and uses<br />
SQL Server 7.0 as data base handler, included on the installation<br />
disks.<br />
The CMS System<br />
Condmaster ® Pro can handle up to 9 CMS Systems, each<br />
consisting of up to 250 measuring units for shock pulse<br />
measurement, analog signals and vibration. These are individually<br />
configured regarding measuring time, measuring<br />
sequence, alarm delays, relay settings, etc.<br />
Leonova<br />
Condmaster ® Pro 3 supports Leonova, a hand-held datalogger<br />
with high resolution, large frequency range vibration<br />
spectrum analysis and the new measuring technique <strong>SPM</strong><br />
Spectrum.<br />
Hardware Requirements:<br />
• PC with min. Pentium II, 233 MHz, 64 MB RAM<br />
and 250 MB hard disk<br />
• Windows NT, 2000, XP (95, 98, ME)<br />
• Colour display adapter min. SVGA, 600 x 800 pixels.<br />
Program versions<br />
Condmaster ® Pro is available as a complete program and<br />
also in selective versions, e. g. for hand-held instruments<br />
with and without data logging and vibration analysis, or for<br />
the CMS System only.<br />
<strong>SPM</strong> <strong>Instrument</strong> AB • Box 504 • S-645 25 Strängnäs • Sweden Technical data are subject to change without notice.<br />
Tel +46 152 22500 • Fax +46 152 15075 • info@spminstrument.se • www.spminstrument.com ISO 9001 certified. © Copyright <strong>SPM</strong> 20<strong>02</strong>-11. TD-172 B