Katalog A-3 Zubehör für Mehrfachverriegelungen Accessories for ...
Katalog A-3 Zubehör für Mehrfachverriegelungen Accessories for ...
Katalog A-3 Zubehör für Mehrfachverriegelungen Accessories for ...
Erfolgreiche ePaper selbst erstellen
Machen Sie aus Ihren PDF Publikationen ein blätterbares Flipbook mit unserer einzigartigen Google optimierten e-Paper Software.
<strong>Katalog</strong> A-3 <strong>Zubehör</strong> <strong>für</strong> <strong>Mehrfachverriegelungen</strong><br />
<strong>Accessories</strong> <strong>for</strong> multi-point locks<br />
Accessoires pour serrures multi-points<br />
3
<strong>Katalog</strong> A-3<br />
<strong>Zubehör</strong> <strong>für</strong> <strong>Mehrfachverriegelungen</strong><br />
<strong>Accessories</strong> <strong>for</strong> multi-point locks<br />
Accessoires pour serrures multi-points<br />
Karl Fliether GmbH & Co. KG<br />
D-42503 Velbert<br />
Postfach 10 03 47<br />
Tel.: +49 (0) 20 51 - 278 - 0<br />
Fax national (0) 20 51 - 278 - 167<br />
Fax international +49 (0) 20 51 -278 - 33<br />
www.kfv.de<br />
info@kfv.de<br />
Werk 1:<br />
Nevigeser Straße 22<br />
D-42551 Velbert<br />
Werk 2:<br />
Heidestr. 11<br />
D-42549 Velbert
Verehrter Kunde,<br />
keine Frage, in puncto Sicherheit sollten Kompromisse kein Thema sein. Da gilt es, ständig neue, ungewöhnliche<br />
Wege zu gehen. Stets weiterzudenken und unkonventionelle Ideen zu entwickeln – um täglich Bestes noch besser<br />
zu machen. Genau das ist der Anspruch, an dem wir uns messen. Das Ergebnis sind High-Tech-Produkte, die das<br />
gesamte Feld moderner Schließsysteme abdecken. Mit einem umfangreichen Angebot an <strong>Zubehör</strong>. Eine Qualität,<br />
die Standards setzt und die wir weltweit mit Ihnen gemeinsam garantieren. Für eine Sicherheit, die aus dem<br />
Rahmen fällt – und in jeden passt.<br />
Dieser <strong>Katalog</strong> gibt Ihnen einen genauen Einblick in diese Qualität und Vielseitigkeit unserer Produkte.<br />
Insofern ist er eine wichtige In<strong>for</strong>mations-Quelle <strong>für</strong> Ihre tägliche Arbeit.<br />
Sollten Sie noch Fragen oder sonstige Wünsche haben, Sie wissen ja, Ihr KFV-Berater ist immer <strong>für</strong> Sie da.<br />
Ihr KFV-Team<br />
Dear Customer,<br />
there’s no doubt about it. When it comes to security, compromise is not an issue. We need to tread new, unfamiliar<br />
paths. To keep thinking and to develop unconventional ideas. To make the best better every day. That is precisely<br />
the claim by which we measure ourselves daily. The result is a range of high-tech products covering every aspect of<br />
modern locking systems. Plus a large selection of accessories. A level of quality that sets standards and which we<br />
guarantee together with you worldwide. For security that doesn’t fit your standard picture of it – but fits in every<br />
situation.<br />
This catalogue will give you an accurate insight into this quality and the versatility of our products.<br />
There<strong>for</strong>e, it <strong>for</strong>ms an important source of in<strong>for</strong>mation <strong>for</strong> your daily work.<br />
Should you have any questions or special requests, you know that your KFV consultant is always ready to listen.<br />
Your KFV-Team<br />
Cher client,<br />
c'est clair: en matière de sécurité, pas question de faire les choses à moitié. Il faut ici sortir continuellement des sentiers<br />
battus. Voir toujours plus loin et développer des solutions originales – pourrendre quotidiennement le meilleur<br />
encore meilleur. Et ça, c'est exactement le défi que nous rele-vons chaque jour. Résultat : des produits hightech<br />
couvrant l'ensemble des systèmes de fermeture modernes et assortis d'une vaste gamme d'accessoires.<br />
Une qualité qui fait référence et que nous garantissons ensemble, vous et nous, dans le monde entier. Pour une<br />
sécurité qui sort du cadre habituel – tout en s'adaptant à tous.<br />
Le présent catalogue vous donnera une idée précise de cette qualité et de la diversité de nos produits. Cela en fait<br />
une source d'in<strong>for</strong>mation précieuse pour votre activité quotidienne.<br />
Vous avez encore des questions ou des souhaits particuliers ? Vous le savez : votre conseiller KFV est toujours à<br />
votre écoute.<br />
Votre KFV-Team
Bitte beachten:<br />
Neben den in diesem <strong>Katalog</strong> angegebenen Artikel-Nummern kann auch mit den auf unseren Lieferscheinen und<br />
Rechnungen ausgedruckten EDV- oder EAN-Nummern bestellt werden.<br />
Falls gewünscht, stellen wir unsere Artikel-Stammdaten auf Diskette zur Verfügung.<br />
Eine elektronische Auftragsabwicklung mit "EDIFACT" ist möglich.<br />
Ausgabe Mai 2003
Qualität<br />
Quality<br />
Qualité<br />
Siehe auch <strong>Katalog</strong> A-2 · See also catalogue A-2 · Voir aussi le catalogue A-2<br />
KFV-Schließsysteme sind ihrer Zeit voraus.<br />
Eine Qualität, die strengste Normen erfüllt.<br />
Wir setzen alles daran, diesen Maßstab auch<br />
in Zukunft zu setzen.<br />
Bei jeder Produktentwicklung.<br />
KFV locking systems are ahead of their time.<br />
A quality that meets the most stringent<br />
norms. We aim to set this standard in the<br />
future, too.<br />
For every product development.<br />
Les serrures KFV sont en avance sur leur<br />
temps. Leur qualité dépasse les normes les<br />
plus sévères. Lors du développement de<br />
chaque produit, nous faisons tout pour qu’il<br />
devienne et reste la référence du marché à<br />
venir.
Nachdruck oder Vervielfältigung von <strong>Katalog</strong>seiten sind ohne unsere schriftliche Genehmigung nicht erlaubt.<br />
Alle Artikel-Beschreibungen und technischen Angaben entsprechen dem Stand unserer Fertigung beim Erscheinen dieses <strong>Katalog</strong>es.<br />
Änderungen behalten wir uns vor.<br />
Für Druckfehler und sonstige Irrtümer übernehmen wir keine Haftung.<br />
Mit der Herausgabe dieses <strong>Katalog</strong>es verliert der <strong>Katalog</strong> A-3 von Juni 2002 seine Gültigkeit.<br />
Reprinting or reproduction of catalogue pages is not permitted without our written approval.<br />
All article descriptions and technical specifications correspond to our production status at the time of the catalogue publication.<br />
We reserve the right to make modifications.<br />
We cannot assume liability <strong>for</strong> errors caused in printing or otherwise.<br />
On its publication, this catalogue replaces catalogue A-3 from june 2002.<br />
La réimpression ou la reproduction de pages de catalogue ne sont pas permises sans notre autorisation écrite.<br />
Toutes les discriptions d’ articles et les données techniques correspondet à l’état de notre fabrication lors de l’impression de ce catalogue.<br />
Nous nous réservons le droit d’apporter des modifications.<br />
Nous n’assurons aucune responsabilité en cas de défauts d’impression et autres erreurs.<br />
L’édition de ce catalogue annule la validité du catalogue A-3 de juin 2002.<br />
Mai 2003
Inhaltsverzeichnis<br />
Contents<br />
Table des Matières<br />
A<br />
B<br />
C<br />
D<br />
E<br />
F<br />
G<br />
H<br />
I<br />
J<br />
Technische Daten<br />
<strong>Zubehör</strong> <strong>für</strong> Holztüren mit 4 mm Falzluft<br />
<strong>Zubehör</strong> <strong>für</strong> Holztüren mit Euro-Nut 6/8 x 4 mm und 7/8 x 4 mm<br />
<strong>Zubehör</strong> <strong>für</strong> Holztüren mit Euro-Falz 18 x 8 mm und 20 x 8 mm<br />
<strong>Zubehör</strong> <strong>für</strong> Holztüren mit Futter und Bekleidung • <strong>Zubehör</strong> <strong>für</strong> stumpf einschlagende Holztüren<br />
Spezial-<strong>Zubehör</strong> "System 13" und "System Nova 15"<br />
<strong>Zubehör</strong> <strong>für</strong> Profilsysteme – Fallen-Riegel-Schließbleche<br />
<strong>Zubehör</strong> <strong>für</strong> Profilsysteme – Fallen-Schließbleche<br />
<strong>Zubehör</strong> <strong>für</strong> Profilsysteme – Schließkästen und Schließbleche <strong>für</strong> Zusatzschlösser<br />
Rollzapfen-Schließplatten, Bandseiten-Sicherungen, Schließleisten<br />
Austauschstücke <strong>für</strong> Schließbleche mit Lochungen <strong>für</strong> E-Öffner • <strong>Zubehör</strong> <strong>für</strong> vertikale<br />
Bolzenverriegelungen diverse <strong>Zubehör</strong>- und Zusatzteile, Stulpflügelbeschläge, Kantriegel<br />
<strong>Zubehör</strong> <strong>für</strong> Kunststoff-Profilsysteme –<br />
Einsatzvorschläge in alphabetischer Reihenfolge der Profilhersteller<br />
Bohrlehre <strong>für</strong> Stahlzargen • Rahmenfräslehre • Rahmenfräslehre <strong>für</strong> Holztüren mit Euronut<br />
Flügelfräslehre<br />
Allgemeine In<strong>for</strong>mationen
Kapitelübersicht<br />
Summary<br />
Sommaire<br />
i 1<br />
i 2<br />
i 3-5<br />
i 6<br />
i 7<br />
i 8<br />
i 9-11<br />
i 12 / i 13-15<br />
i 16<br />
i 17<br />
i 19-20<br />
i 21-26<br />
Schlossteile, Maßbezeichnungen<br />
Lock parts, Figured dimension<br />
Eléments de la serrure, cote inscrite<br />
Richtungsbezeichnungen nach DIN 107<br />
Left or right handing according to DIN 107<br />
Détermination du sens selon DIN 107<br />
Türarten, Falzausbildungen, Begriffe<br />
Types of doors, Rebated variations<br />
Types de porte, termes<br />
Lieferbare Oberflächen<br />
Available surfaces<br />
Finitions possibles<br />
Erklärungen besonderer Kennzeichen, Abkürzungen und Symbole<br />
Explanations of special marks, abreviations and symbols<br />
Explications sur abréviations et symboles<br />
Allgemeine Hinweise<br />
General instructions<br />
Remarques générales<br />
Gebrauchshinweise Türschlösser<br />
Instructions <strong>for</strong> use of locks<br />
Instructions d’utilisation pour serrures<br />
Produktprogramm / Wichtige Produktin<strong>for</strong>mationen Türschlösser<br />
Product programme / Important product in<strong>for</strong>mation on locks<br />
Programme des produits / In<strong>for</strong>mations importantes sur le serrures<br />
Vertretungen/Fachberatungen Deutschland<br />
Sales Representatives and Technical Advisers Germany<br />
Representants et conseillers techniques en Allemagne<br />
Verkaufsgebiete Deutschland<br />
Sales Areas Germany<br />
Zone de vente en Allemagne<br />
Vertretungen/Fachberatungen international<br />
Sales Representatives and Technical Advisers International<br />
Representants et conseillers techniques internationaux<br />
Allgemeine Geschäftsbedingungen<br />
General Conditions of Sale<br />
Conditions générales de vente
Technische Daten<br />
Technical Data<br />
Données techniques<br />
Schlossteile, Maßbezeichnungen<br />
Lock parts, Figured dimension<br />
Eléments de la serrure, cote inscrite<br />
A Dornmaß<br />
Backset<br />
Axe<br />
B Kastenbreite<br />
Width of lock case<br />
Profondeur du coffre<br />
i 1<br />
A<br />
F<br />
B<br />
C Kastenhöhe<br />
Height of lock case<br />
Hauteur du coffre<br />
D Entfernung<br />
Centre distance<br />
Entraxe<br />
1<br />
2<br />
3<br />
4<br />
5<br />
6<br />
7<br />
8<br />
9<br />
10<br />
11<br />
12<br />
13<br />
D<br />
C E<br />
1 Stulp<br />
Face plate<br />
Têtière<br />
2 Falle<br />
Latch bolt<br />
Demi-tour<br />
3 Fallenfeder<br />
Latch bolt spring<br />
Ressort du demi-tour<br />
4 Konterfeder<br />
Handle spring<br />
Ressort de béquille<br />
5 Nuss<br />
Spindle square<br />
Fouillot<br />
6 Wechsel<br />
Latch lever<br />
Equerre<br />
7 Wechsel-Druckstück<br />
Latch lever<br />
Equerre<br />
8 Zuhaltungsfeder<br />
Tumbler spring<br />
Ressort de gorge<br />
9 Zuhaltung<br />
Tumbler<br />
Gorge<br />
10 Riegel<br />
Deadbolt<br />
Pêne-Dormant<br />
11 Tourstift<br />
Bolt stump<br />
Prisonnier de passage de gorge<br />
12 Schlossblech<br />
Lock case cover<br />
Palâtre<br />
13 Führung <strong>für</strong> Zylinder-Befestigungsschraube<br />
Guide <strong>for</strong> cylinder fixing screw<br />
Guidage pour vis de fixation du cylindre<br />
E Stulplänge<br />
Length of face plate<br />
Longueur de la têtière<br />
F Stulpbreite<br />
Width of face plate<br />
Largeur de la têtière
Technische Daten<br />
Technical Data<br />
Données techniques<br />
Richtungsbezeichnungen nach DIN 107<br />
Left or right handing according to DIN 107<br />
Détermination du sens selon DIN 107<br />
DIN links (rechts einwärts)<br />
DIN left (right inwards)<br />
DIN gauche (ouverture intérieure à droite)<br />
DIN links (links auswärts)<br />
DIN left (left outwards)<br />
DIN gauche (ouverture extérieure à gauche)<br />
DIN rechts (rechts auswärts)<br />
DIN right (right outwards)<br />
DIN droite (ouverture extérieure à droite)<br />
DIN rechts (links einwärts)<br />
DIN right (left inwards)<br />
DIN droite (ouverture intérieure à gauche)<br />
Bestimmung der Richtung von der Türseite, auf der die Bänder sichtbar sind: Sichtbarer Sitz der Türbänder rechts = DIN Rs, sichtbarer Sitz der<br />
Türbänder links = DIN Ls.<br />
The direction can be determined from the door side from which the hinges are visible: Hinges set on the right hand side = DIN right; Hinges set<br />
on the left hand side = DIN left.<br />
Le sens est déterminé du côté de la porte où les paumelles sont visibles: Paumelles à gauche = DIN gauche; Paumelles à droite = DIN droite.<br />
Hinweis: Sofern KFV-<strong>Zubehör</strong>teile nicht links und rechts verwendbar sind, ist im Beschreibungstext vermerkt: rechts oder links.<br />
Note: For use of KFV accessories which cannot be used <strong>for</strong> either hand then please find the description left or right in the text.<br />
Note: Pour l´utilisation d´accessoires KFV qui ne sont pas réversibles sans démontage, il est précisé droite ou gauche dans la description.<br />
i 2
Technische Daten<br />
Technical Data<br />
Données techniques<br />
Türarten, Falzausbildungen, Begriffe<br />
Types of doors, Rebated variations<br />
Types de porte, termes<br />
i 3<br />
Überfälzte Holztür, 4 mm Falzluft, Türverriegelung mit 20 mm<br />
Stulpbreite.<br />
Rebated wooden doors, 4 mm air gap, door lock with 20 mm face<br />
plate width.<br />
Porte à recouvrement en bois, 4 mm de jeux de battement,<br />
serrure avec une têtière de 20 mm.<br />
Überfälzte Holztür, 4 mm Falzluft, Türverriegelung mit 16 mm<br />
Stulpbreite.<br />
Rebated wooden doors, 4 mm air gap, door lock with 16 mm face<br />
plate width.<br />
Porte à recouvrement en bois, 4 mm de jeux de battement,<br />
serrure avec têtière de 16 mm.<br />
Überfälzte Holztür mit Euro-Falz 18 x 8 mm.<br />
Rebated wooden door with Euro rebate 18 x 8 mm.<br />
Porte à recouvrement en bois avec rabatt Euro 18 x 8 mm.<br />
Überfälzte Holztür mit Euro-Falz 20 x 8 mm.<br />
Rebated wooden door with Euro rebate 20 x 8 mm.<br />
Porte à recouvrement en bois avec rabatt Euro 20 x 8 mm.
Technische Daten<br />
Technical Data<br />
Données techniques<br />
Türarten, Falzausbildungen, Begriffe<br />
Types of doors, Rebated variations<br />
Types de porte, termes<br />
Überfälzte Holztür mit Euro-Nut 7/8 x 4 mm und 6/8 x 4 mm.<br />
Rebated wooden door, Euro groove 7/8 x 4 mm and 6/8 x 4 mm.<br />
Porte à recouvrement en bois avec gorge européanne 7/8 x 4 mm<br />
et 6/8 x 4 mm.<br />
Kunststofftür.<br />
u-PVC door.<br />
Porte en PVC.<br />
Stumpf einschlagende Holztür.<br />
Flush door.<br />
Porte à fleur en bois.<br />
Aluminiumtür.<br />
Aluminium door.<br />
Porte en aluminium.<br />
i 4
Technische Daten<br />
Technical Data<br />
Données techniques<br />
Türarten, Falzausbildungen, Begriffe<br />
Types of doors, Rebated variations<br />
Types de porte, termes<br />
i 5<br />
Begriffe<br />
Terms<br />
Termes<br />
1<br />
2 3<br />
4<br />
5<br />
6<br />
7<br />
16<br />
1 Falzluft (Kammermaß)<br />
Air gap<br />
Chambre de décompression<br />
2 Blendrahmenfalz<br />
Rear bead leg height<br />
Clip parclose<br />
Reihenfolge der Maßdaten<br />
Order of Measurement Data<br />
Liste de mesures<br />
A)<br />
B)<br />
17<br />
8<br />
9<br />
10<br />
11<br />
12<br />
13<br />
14<br />
15<br />
3 Äußere Sichtfläche Blendrahmen<br />
External face of door frame<br />
Face externe dormant<br />
4 Achsmaß<br />
Axis dimension<br />
Axe gorge<br />
5 Innere Sichtfläche Blendrahmen<br />
Internal face of door frames<br />
Face interne dormant<br />
A U-Profil-Schließblech: *<br />
U-profile face plate: *<br />
Gâche en «U»: *<br />
1 Länge<br />
Length<br />
Longueur<br />
2 Höhe des Anschlagschenkels<br />
Height of locating leg<br />
Petite hauteur<br />
3 U-Profil-Breite<br />
U-profile width<br />
Largeur de la gâche en U<br />
4 Höhe des hinteren (Stütz-)Schenkels<br />
Height of rear support leg<br />
Grande hauteur<br />
5 Materialstärke<br />
Material thickness<br />
Epaisseur du matériau<br />
6 Überschlaghöhe<br />
Sash upstand height<br />
Epaisseur du recouvrement<br />
7 Aufschlag innen<br />
Internal sash cover<br />
Dimension du recouvrement ouvrant<br />
sur dormant<br />
8 Falzbreite<br />
Frame rebate height<br />
Hauteur fond de feuillure dormant<br />
9 Aufschlag außen<br />
External sash cover<br />
Dimension du recouvrement dormant<br />
sur ouvrant<br />
10 Flügelfalz<br />
Sash rebate<br />
Rejingot<br />
11 Äußere Sichtfläche Flügel<br />
External face of sash<br />
Face externe ouvrant<br />
12 Falztiefe<br />
Overall rebate width<br />
Largeur utile feuillure<br />
13 Beschlag-Aufnahme-Nut<br />
Fittings groove<br />
Gorge européenne<br />
14 Innere Sichtfläche Flügel<br />
Internal face of sash<br />
Face interne ouvrant<br />
15 Überschlagbreite<br />
Sash upstand height<br />
Hauteur fond de feuillure ouvrant<br />
16 Aufrechter Schenkel (Blendrahmen)<br />
Rein<strong>for</strong>cement (door frame)<br />
Ren<strong>for</strong>t dormant<br />
17 Aufrechter Schenkel (Flügel)<br />
Rein<strong>for</strong>cement (door sash)<br />
Ren<strong>for</strong>t ouvrant<br />
B Winkelschließblech: *<br />
Angled strike plate: *<br />
Gâche Equerre ou en «L»: *<br />
1 Länge<br />
Length<br />
Longueur<br />
2 Höhe des Anschlagschenkels<br />
Height of angular return<br />
Dimension du retour<br />
3 Breite des Falzschenkels<br />
Face plate width<br />
Largeur de la face<br />
4 Materialstärke<br />
Material thickness<br />
Epaisseur du matériau<br />
* gilt nicht <strong>für</strong> Winkelbleche mit Stützschenkel Serie 20..., 2130... usw (siehe <strong>Katalog</strong> A-3).<br />
* does not apply to angled plate with support leg series 20... etc (see catalogue A-3).<br />
* pas valable pour les gâches équerres avec une grande hauteur serie 20..., 2130… etc (voir le catalogue A-3).
Technische Daten<br />
Technical Data<br />
Données techniques<br />
Lieferbare Oberflächen<br />
Standard: soweit in der Artikelbeschreibung nichts anderes vermerkt, werden KFV-<strong>Zubehör</strong>teile standardmäßig in verzinkt<br />
und gelb chromatiert geliefert.<br />
Ferner lieferbar: verzinkt und hell chromatiert, weiß- (RAL 9016), silberfarbig- (RAL 9006, RAL 9007), braun- (RAL 8017) oder<br />
schwarz (RAL 9005) kunststoffbeschichtet, Nirosta matt gebürstet,altsilber beschichtet 0125.<br />
Andere Ausführungen auf Anfrage.*<br />
Ausnahme: AT-Stücke und Bandseiten-Sicherungen<br />
Standard: verzinkt und gelb chromatiert<br />
Ferner lieferbar: verzinkt und hell chromatiert<br />
Schließbleche Schließbleche, die üblicherweise aus Stahl hergestellt werden, sind größtenteils auch in Messing poliert,<br />
aus Messing Messing matt gebürstet, Messing matt vernickelt oder Nirosta matt gebürstet beziehbar.<br />
oder Nirosta<br />
Da die Liefermöglichkeit in der Regel mengenabhängig ist, erbitten wir Ihre Anfrage unter Angabe der benötigten<br />
Stückzahl.<br />
Ohne vorherige Anfrage und ohne Auflage hinsichtlich der Abnahmemenge sind lieferbar:<br />
Ausführung Winkel-Schließbleche der Serie 14 und 15 nebst Varianten sowie Flach-Schließbleche<br />
Messing<br />
Ausführung Flach-Schließbleche, gleichschenklige U-Profil-Schließbleche, Nr. 25-06..., 25-08..., 25-10..., in 20 oder 24<br />
Edelstahl mm Breite und Winkel-Schließbleche Serie 14 und 17.<br />
* gilt nicht <strong>für</strong> Schließleisten<br />
i 6
Technische Daten<br />
Technical Data<br />
Données techniques<br />
Erklärungen besonderer Kennzeichen, Abkürzungen und Symbole<br />
Hochgestellte Zahlen hinter der Artikel-Nummer:<br />
1) einsetzbar: eff-eff - E-Öffner Nr. 17, 27, 116, 126 oder 136<br />
2) einsetzbar: eff-eff - E-Öffner Nr. 19, 29, 119 oder 129<br />
3) einsetzbar: eff-eff - E-Öffner Nr. 17 oder 27, abgefräst auf 19 mm<br />
4) einsetzbar: eff-eff - E-Öffner Nr. 116 E - 130<br />
5) Schließteil ist auch <strong>für</strong> zweiflügelige Türen geeignet<br />
Abkürzungen im Beschreibungstext:<br />
AT = verstellbares Austauschstück<br />
FL = Flügel<br />
Ls = Links<br />
R = Rahmen<br />
Rs = Rechts<br />
Abkürzungen vor der Artikel-Nummer:<br />
D = durchgehend (Leiste einteilig)<br />
M = mehrteilig (Leiste dreiteilig)<br />
Abkürzungen hinter der Artikel-Nummer:<br />
E = mit Lochung <strong>für</strong> E-Öffner<br />
G = verstellbar durch Gusskasten<br />
H = Hinterfütterung, Kunststoff<br />
HS = Hinterfütterung, Stahlblechkasten<br />
O = Oberteil (bei dreiteiliger Leiste)<br />
P = Pendeltür-Schließblech mit Spezial-Hinterfütterung <strong>für</strong> Pendelfalle 11,6 mm Ø<br />
R = abgerundet<br />
T = mit Sperrbügel <strong>für</strong> Türspalt-Sicherungen<br />
U = Unterteil (bei dreiteiliger Leiste)<br />
V = verstellbar durch Exzenterdorn von vorne<br />
Symbole:<br />
i 7<br />
<strong>Zubehör</strong> <strong>für</strong> Rundbolzen<br />
<strong>Zubehör</strong> <strong>für</strong> Bolzen-Schwenkriegelkombination<br />
<strong>Zubehör</strong> <strong>für</strong> Schwenkriegel<br />
<strong>Zubehör</strong> <strong>für</strong> H-Riegel<br />
<strong>Zubehör</strong> <strong>für</strong> Rollzapfen
Technische Daten<br />
Technical Data<br />
Données techniques<br />
Allgemeine Hinweise<br />
Schließbleche <strong>für</strong> KFV-<strong>Mehrfachverriegelungen</strong> sind u. a. mit Zusatz-Riegelschloss, das über separaten Zylinder zu schließen<br />
Zylinder-Riegelschloss ist, lieferbar. Hier<strong>für</strong> sind die zum jeweiligen Türsystem passenden 1-riegeligen Schließbleche einzusetzen.<br />
Verstellbare Die Beschreibung der Holztür-Schließbleche mit Lochung <strong>für</strong> E-Öffner enthält u.a. den Hinweis auf das<br />
Austauschstücke passende Austauschstück.<br />
Im Kapitel H ist neben dem <strong>für</strong> das jeweilige Kunststoff-Profilsystem empfohlene Schließblech mit Lochung<br />
<strong>für</strong> E-Öffner auch die Artikel-Nummer des zugehörigen AT-Stückes vermerkt.<br />
Schließbleche und Austauschstücke werden in der Regel getrennt bestellt und geliefert. Auf Wunsch<br />
können Schließbleche auch mit montiertem AT-Stück bezogen werden.<br />
Einteilige Schließleisten mit Lochung <strong>für</strong> E-Öffner werden, wie beschrieben und abgebildet, generell mit<br />
montiertem, zum Türsystem passenden Austauschstück geliefert.<br />
Das bei den Hauptschloss-Schließblechen der dreiteiligen Leisten abgebildete AT-Stück gehört dagegen<br />
nicht zum Lieferumfang der Standardausführung.<br />
Zeichnungen Sämtliche <strong>Zubehör</strong>-Zeichnungen sind nicht maßstäblich, sie dienen lediglich der Veranschaulichung.<br />
<strong>Zubehör</strong> <strong>für</strong> Lieferung auf Anfrage, siehe auch Sonderprospekt mit ausführlichen In<strong>for</strong>mationen über KFV-<br />
Serie 2700 Türverriegelungen mit selbstverriegelnden Fallen, kombiniert mit Schwenkriegelarretierung nebst<br />
Hinweisen auf das hier<strong>für</strong> einzusetzende <strong>Zubehör</strong>.<br />
<strong>Zubehör</strong> <strong>für</strong> In den Kapiteln A, B und C sind <strong>für</strong> den Bereich Holztüren die gängigsten Schließbleche und Schließleisten<br />
Türspalt-Sicherung <strong>für</strong> KFV-<strong>Mehrfachverriegelungen</strong> mit Türspalt-Sicherung aufgeführt. Schließbleche und Schließleisten mit<br />
Sperrbügel in anderen Ausführungen, passend <strong>für</strong> Holztüren, auf Anfrage.<br />
Sperrbügel-Schließbleche und Leisten <strong>für</strong> Profilsysteme: siehe Hinweise Kapitel D und Seite F 36<br />
<strong>Zubehör</strong> Schließstücke <strong>für</strong> Türverschlüsse mit Zwillingsbolzen und Pilzzapfen sowie <strong>für</strong> Schiebetüren sind im <strong>Katalog</strong><br />
auf Anfrage A-3 nicht enthalten. Dies gilt auch <strong>für</strong> H-Riegel-<strong>Zubehör</strong> im Holz- und Kunststoffbereich. Die Anfertigung<br />
und Lieferung dieser Teile ist mengenabhängig. Bei Bedarf erbitten wir Ihre Anfrage.<br />
Sollten Sie das von Ihnen gewünschte <strong>Zubehör</strong> in diesem <strong>Katalog</strong> nicht finden, bzw. Schließteile in<br />
Sonderausführung <strong>für</strong> spezielle Türkonstruktionen benötigen, wenden Sie sich bitte an unsere Fachberater<br />
oder an unsere Vertriebsabteilung.<br />
Zusatzteile KFV-<strong>Mehrfachverriegelungen</strong> sind u.a. mit Vorrichtung <strong>für</strong> Alarmanlagen lieferbar - Ausrüstung<br />
<strong>für</strong> Alarmanlagen mit Blockschloss, Mikroschalter o.ä. -<br />
Wenden Sie sich bitte bei Interesse an unsere Fachberatung oder an unsere Vertriebsabteilung.<br />
i 8
Technische Daten<br />
Technical Data<br />
Données techniques<br />
Gebrauchshinweise Türschlösser<br />
Instructions <strong>for</strong> use of locks<br />
Instructions d’utilisation pour serrures<br />
i 9<br />
Das Türblatt darf im Schließbereich nicht bei eingebautem Schloss durchbohrt werden.<br />
Do not drill through the lock case.<br />
Ne pas percer le coffre de la serrure.<br />
Der Drückerstift darf nicht mit Gewalt durch die Schlossnuss geschlagen werden.<br />
Do not use <strong>for</strong>ce when installing the spindle.<br />
Ne pas engager au marteau le carré de la béquille au travers du fouillot.<br />
Das Türblatt soll nicht am Drücker getragen werden.<br />
Do not use the handle furniture to carry the door.<br />
Ne pas porter un vantail de porte en le saisissant par sa béquille.<br />
Der Abstand zwischen Schlossstulpe und Schließblech soll zwischen 2 mm und 5 mm<br />
betragen.<br />
The clearance between face plate and strike plate must be 2–5 mm.<br />
L’espace entre la têtière et la gâche doit être de 2 à 5 mm.<br />
Bei Anti-Panik-Schlössern darf kein Schlüssel im Schloss stecken bleiben.<br />
Keys must not be left inserted in anti-panic locks.<br />
Ne pas laisser de clé inserrée dans une serrure anti-panique.
Technische Daten<br />
Technical Data<br />
Données techniques<br />
Gebrauchshinweise Türschlösser<br />
Instructions <strong>for</strong> use of locks<br />
Instructions d’utilisation pour serrures<br />
In Anti-Panik-Einsteckschlösser dürfen keine Schließzylinder mit Freilauffunktion des<br />
Mitnehmers eingebaut werden. Dies sind beispielsweise Zylinder, bei denen sich der<br />
Mitnehmer bei abgezogenem Schlüssel frei drehen lässt, oder sogenannte Knaufzylinder.<br />
Do not use cylinders comprising a free moving cam with anti-panic mortise locks. These types<br />
of cylinders include ones that possess a cam that can turn without an inserted key and thumb<br />
turn cylinders.<br />
Ne pas utiliser de cylindre avec panneton à course libre pour serrures à larder antipanique.<br />
Ce sont, par exemple, les cylindres avec panneton qui tournent par eux même sans la clé à<br />
l´intérieur ou bien les cylindres à bouton.<br />
Die Betätigung des Panikdrückers darf nur im besonderen Gefahrenfall<br />
(nicht im Dauerbetrieb) erfolgen.<br />
Only operate anti-panic mechanism in case of ermergency, avoid frequent use.<br />
Utiliser une serrure anti-panique seulement en cas de danger, éviter une utilisation<br />
fréquente.<br />
Zweiflügelige Türen dürfen nicht über den Standflügel aufgezwungen werden.<br />
French doors must not be <strong>for</strong>ced open by unlocking the passiv door while the activ door<br />
remains locked.<br />
Ne pas essayer d’ouvrir une porte à deux vantaux en déverrouillant le vantail semi-fixe tandis<br />
que l’ouvrant reste verrouillé.<br />
Sobald Spuren von Gewaltanwendung sichtbar sind, muss das Schloss ersetzt werden.<br />
The lock must be replaced as soon as it shows any damage.<br />
Remplacer systématiquement toute serrure présentant des traces de détérioration.<br />
Schlösser sind mindestens 1x jährlich zu schmieren (nicht harzendes Öl).<br />
Lubricate the locks with non resinous oil at least once a year.<br />
Toute serrure doit être lubrifiée avec du huile non résineuse au moins une fois par an.<br />
i 10
Technische Daten<br />
Technical Data<br />
Données techniques<br />
Gebrauchshinweise Türschlösser<br />
Instructions <strong>for</strong> use of locks<br />
Instructions d’utilisation pour serrures<br />
i11<br />
Der Drücker darf nur im normalen Drehsinn belastet werden.<br />
In Betätigungsrichtung darf auf den Drücker max. nur eine Kraft von 150 N aufgebracht werden.<br />
Das Schloss darf nur mit zugehörigem Schlüssel (und nicht mit artfremden Gegenständen)<br />
geschlossen werden.<br />
Operate handle in the correct direction only.<br />
A maximum load of 150 N must not be exceeded by pushing down the handle.<br />
Only use the appropriate key (do not use any <strong>for</strong>eign body).<br />
N’utiliser la béquille que dans le sens correct de rotation.<br />
Une <strong>for</strong>ce de plus 150 N de doit pas être appliquée sur la béquille.<br />
Uniquement utiliser la clé appropriée (ne pas utiliser de corps étrangers).<br />
Schlossriegel und -falle dürfen nicht überstrichen/ – lackiert werden.<br />
Do not paint latch and deadbolt.<br />
N’appliquer ni peinture ni vernis sur le pêne dormant et pêne demi-tour.<br />
Der Schlossriegel darf nicht bei offener Tür vorgeschlossen sein.<br />
To avoid any damage, deadbolt must not protrude when door is open.<br />
Ne pas faire saillir le pêne dormant la porte ouverte.<br />
Drücker und Schlüssel dürfen nicht gleichzeitig betätigt werden.<br />
Do not operate handle and key simultaneously.<br />
Ne pas actionner simultanément la béquille et la clé.
Allgemeine In<strong>for</strong>mationen<br />
General in<strong>for</strong>mations<br />
In<strong>for</strong>mations générales<br />
Produktprogramm<br />
Product programme<br />
Programme des produits<br />
2<br />
3<br />
<strong>Katalog</strong> A-1: Einsteck-Schlösser und <strong>Zubehör</strong><br />
Mortise Door Locks and <strong>Accessories</strong><br />
Serrures à larder et accessoires<br />
<strong>Katalog</strong> A-2: <strong>Mehrfachverriegelungen</strong><br />
Multi-point locks<br />
Serrures multi-points<br />
<strong>Katalog</strong> A-3: <strong>Zubehör</strong> <strong>für</strong> <strong>Mehrfachverriegelungen</strong><br />
<strong>Accessories</strong> <strong>for</strong> multi-point locks<br />
Accessoires pour serrures multi-points<br />
i 12
Allgemeine In<strong>for</strong>mationen<br />
General in<strong>for</strong>mations<br />
In<strong>for</strong>mations générales<br />
Wichtige Produktin<strong>for</strong>mationen Türschlösser<br />
Important product in<strong>for</strong>mation on locks<br />
In<strong>for</strong>mations importantes sur le serrures<br />
Gemäß der im „Produkthaftungsgesetz“ definierten<br />
Haftung des Herstellers <strong>für</strong> seine Produkte sind die<br />
nachfolgenden In<strong>for</strong>mationen über Schlösser zu<br />
beachten.<br />
Die Nichtbeachtung entbindet uns von unserer<br />
Haftungspflicht.<br />
1. Produktin<strong>for</strong>mation und bestimmungsgemäße<br />
Verwendung<br />
Ein Schloss hat meist die Aufgabe, eine Tür zu verschließen<br />
und sie zu versperren. Manche einfache<br />
Schlosskonstruktionen dienen nur zum Verschließen –<br />
auch Verschlüsse genannt. Unter Verschließen versteht<br />
man das Geschlossenhalten einer Tür derart, dass sie<br />
durch Zug und Druck nicht geöffnet werden kann,<br />
andererseits auf einfache Art und Weise, etwa durch<br />
Drückerbetätigung, zu öffnen ist.<br />
Unter Versperren versteht man das Sichern der<br />
geschlossenen Tür durch einen aus dem Türschloss<br />
ausgeschobenen, ungefederten, starren Riegel, der in<br />
die entsprechenden Ausnehmungen der Zarge bzw.<br />
der Schließblechöffnung greift.<br />
Der Riegel muss in der Endlage feststellbar sein, ferner<br />
muss das Öffnen der Türe ohne passenden Schlüssel<br />
wirksam erschwert sein.<br />
Zum Verschließen dient die Falle.<br />
Das Versperren übernimmt der Riegel. Mit dem<br />
Getriebe wird der Riegel verschoben. Das Gesperre<br />
(Zuhaltung mit Verankerung) übernimmt das<br />
Festhalten in einer bestimmten Lage. Versperrt werden<br />
darf nur in vorher bereits geschlossenem Zustand (gilt<br />
auch <strong>für</strong> Hakenfallen, Zirkelriegel).<br />
Zylinderbefestigungsschrauben sind auf Dornmaßlänge<br />
abzustimmen oder anzupassen.<br />
Ein Einsteckschloss ist ein Schloss, das in eine vorhandene<br />
Ausnehmung (Schlosstasche) im Türblatt eingesteckt<br />
und verschraubt wird und in der Regel Drehflügeltüren<br />
als Basis hat.<br />
Zur Sicherstellung des bestimmungsgemäßen<br />
Gebrauchs gilt auch die richtige Kombination mit<br />
zulässigen Beschlägen und Schließmitteln (z. B.<br />
Schlüssel, Zylinder) sowie <strong>Zubehör</strong> (z. B. Schließblech)<br />
bei der Montage nach Einbauanweisung bzw. nach<br />
abgestimmten DIN-Normen unter Einbeziehung der<br />
Wartung. Schlösser <strong>für</strong> Türen mit Sonderfunktionen<br />
sind entsprechend den Bestimmungen auszuwählen<br />
und gegebenenfalls zusätzlich zu kennzeichnen.<br />
Bei Panikschlössern in Türen <strong>für</strong> Flucht- und Rettungswege<br />
darf die Drückerbetätigung nicht gleichzeitig mit<br />
dem Versperren oder Entsperren erfolgen. Diese<br />
Schlösser sind in der Notfunktion <strong>für</strong> die geringe<br />
Betätigungsfrequenz im Notfall ausgelegt. Das normale,<br />
gewollte Versperren (d. h. 1- oder 2-tourig durch<br />
Schlüsseldrehung) bzw. Entsperrung darf nicht durch<br />
Dauerbetätigung der Notfunktion ersetzt werden.<br />
Schließzylinder (Euro-Profilzylinder) können nur dann<br />
vorbehaltlos in Schlösser eingebaut werden, wenn<br />
diese Schließzylinder einer Maßnorm (DIN 18252)<br />
unterliegen und solche Schlösser ausdrücklich <strong>für</strong><br />
Schließzylinder nach dieser Norm vorgerichtet sind.<br />
Grundsätzlich sollten Zylinder derart eingebaut werden,<br />
dass der Schließbart von der Schlossstulpe wegzeigt,<br />
es sei denn, die Rechts-/Linksstellung des<br />
Schließbartes hat keinen Einfluß auf die Wechselstellung<br />
im Schloss.<br />
In allen anderen Fällen muss sich der Hersteller,<br />
Händler, Verarbeiter oder Verbraucher solcher<br />
Schlösser Gewißheit verschaffen, dass der von ihm<br />
ausgewählte Schließzylinder <strong>für</strong> den Einbau und <strong>für</strong><br />
die vorgesehene Verwendung geeignet ist.<br />
i13<br />
In accordance with the manufacturer’s liability <strong>for</strong> his<br />
products, as defined in the “Product Liability Law”, the<br />
following in<strong>for</strong>mation relating to locks must be observed.<br />
If this in<strong>for</strong>mation is not observed, we are released<br />
from our liability obligation.<br />
1. Product In<strong>for</strong>mation and Proper Use<br />
A lock generally has the task of closing and locking a<br />
door.<br />
Some simple lock constructions merely serve to close a<br />
door (these are also called latches). The term “close” is<br />
to be understood as keeping a door closed in such a<br />
way that it cannot be opened by pulling or pushing<br />
but, on the other hand, can be opened easily, <strong>for</strong> example<br />
by using the lever handle.<br />
The term „lock“ is to be understood as securing the<br />
closed door using an unsprung, rigid bolt which is<br />
pushed out of the door lock into the corresponding<br />
recesses in the frame or in the striking plate opening.<br />
It must be possible to lock the deadbolt in its final<br />
position. Moreover, opening of the door without a suitable<br />
key must be hindered effectively.<br />
The latch bolt serves to close the door.<br />
The door is locked by the deadbolt which is moved by<br />
the drive gear. The deadbolt is fixed in a certain position<br />
by the locking mechanism (tumbler with fixture).<br />
The door may only be locked after it has been closed<br />
(this also applies to hook latch bolts and hook bolts).<br />
Cylinder mounting screws must be matched and adapted<br />
to the backset length.<br />
A mortise lock is a lock which is inserted and screwed<br />
into an existing recess (lock pocket) in the door leaf<br />
and which usually has revolving-sash doors as a basis.<br />
In order to ensure proper use, the correct combination<br />
with permissible door furniture and locking equipment<br />
(e. g. key, cylinder) and with accessories (e. g.<br />
striking plate) must also be guaranteed at the time of<br />
assembly according to the installation instructions and<br />
agreed DIN standards, taking account of maintenance.<br />
Locks <strong>for</strong> doors with special functions must be selected<br />
according to their purpose and must be marked additionally<br />
if necessary.<br />
In the case of panic locks in doors <strong>for</strong> escape and rescue<br />
routes, the lever handle may not be used at the<br />
same time as the door is being locked or unlocked. The<br />
emergency function of these locks is designed <strong>for</strong> the<br />
low frequency of use in cases of emergency. Normal,<br />
intended locking (i. e. single-throw or double-throw<br />
locking by turning the key) or unlocking may not be<br />
replaced by continuous use of the emergency function.<br />
Locking cylinders (Euro cylinders) may only be installed<br />
unconditionally in locks if the locking cylinders are<br />
subject to a dimension standard (DIN 18252) and the<br />
locks are expressly suitable <strong>for</strong> locking cylinders in<br />
accordance with this standard.<br />
Basically, cylinders should be installed in such a way<br />
that the locking bit points away from the lock face<br />
plate unless the right/left position of the locking bit<br />
has no effect on the alternating position in the lock.<br />
In all other cases, the manufacturers, dealers, processors<br />
and users of such locks must make sure that the<br />
locking cylinders selected by them are suitable <strong>for</strong><br />
installation and <strong>for</strong> the planned use.<br />
Mandatory legal provisions must be observed.<br />
Con<strong>for</strong>mément à la responsabilité définie dans le<br />
«Produkthaftungsgesetz» (loi allemande sur la responsabilité<br />
du fabricant), il y a lieu de prendre en considération<br />
les in<strong>for</strong>mations suivantes sur les serrures.<br />
La non-observation exempte notre société de son obligation<br />
de responsabilité.<br />
1. In<strong>for</strong>mation sur les produits et utilisation con<strong>for</strong>me<br />
à leur destination<br />
Une serrure a la plupart du temps pour but de fermer<br />
une porte et de la verrouiller. Certaines constructions<br />
simples de serrure servent uniquement à la fermeture<br />
– elles sont aussi appelées serrures bec decane. Par fermeture,<br />
on entend que la porte est maintenue fermée<br />
de telle sorte qu’elle ne puisse pas être ouverte en<br />
tirant ou en poussant, mais qu’elle peut être ouverte<br />
aisément, par exemple en actionnant une béquille.<br />
Par verrouillage, on entend assurer la porte fermée par<br />
un pêne-dormant rigide, sans ressort, sorti de la serrure<br />
de porte, qui a prise dans les creux correspondants du<br />
dormant ou dans l’ouverture de la gâche.<br />
La position finale du pêne-dormant doit être blocable,<br />
de plus, l’ouverture des portes doit être efficacement<br />
rendue difficile sans des clés adéquates.<br />
Le demi-tour sert à la fermeture.<br />
Le pêne-dormant assume le verrouillage. Le pêne-dormant<br />
est poussé au moyen du mécanisme. La partie<br />
mobile (aiguille) assure le maintien dans une certaine<br />
position. On ne peut verrouiller que dans un état<br />
fermé au préalable (cela s’applique aussi aux mentonnets,<br />
aux crochets).<br />
Les vis de fixation des cylindres doivent être adaptées<br />
à la longueur de l’axe.<br />
Une serrure à larder est une serrure qui est insérée et<br />
vissée dans un creux existant (mortaise) dans le vantail<br />
de porte et qui a en règle générale pour base des<br />
portes à deux battants.<br />
La combinaison correcte de ferrures admises et d’accessoires<br />
de serrurerie (p. ex. clés, cylindres) ainsi que<br />
d’accessoires (p. ex. gâche) lors du montage selon les<br />
instructions de montage et les normes DIN adéquates<br />
en respectant les consignes d’entretien est déterminante<br />
pour garantir une utilisation con<strong>for</strong>me à la destination.<br />
Les serrures pour des portes ayant des fonctions<br />
spéciales doivent être choisies con<strong>for</strong>mément à<br />
leur destination et éventuellement marquées spécialement.<br />
Dans le cas de serrures anti-panique dans des portes<br />
pour les issues de secours et de sauvetage, l’actionnement<br />
de la béquille ne doit pas se faire simultanément<br />
avec le verrouillage ou le déverrouillage. La fonction<br />
d’urgence de ces serrures est conçue pour une faible<br />
fréquence d’actionnement, uniquement en cas d’urgence.<br />
Le verrouillage normal, volontaire (c.a.d. un ou<br />
deux tours de clé) resp. le déverrouillage ne doit pas<br />
être remplacé par l’actionnement de la fonction d’urgence.<br />
Les cylindres (cylindre profile européen) fermeture<br />
peuvent être montés sans réserve dans des serrures<br />
uniquement lorsque ces cylindres de fermeture sont<br />
soumis à une norme dimensionnelle (DIN 18252) et que<br />
de telles serrures sont prévues expressément pour des<br />
cylindres de fermeture selon cette norme.<br />
En principe, les cylindres doivent être montés de telle<br />
manière que le panneton de clé soit tourné dans le<br />
sens opposé à la têtière, à moins que la position à droite<br />
/ à gauche du panneton de clé n’ait aucune influence<br />
sur la position alternative dans la serrure.
Allgemeine In<strong>for</strong>mationen<br />
General in<strong>for</strong>mations<br />
In<strong>for</strong>mations générales<br />
Wichtige Produktin<strong>for</strong>mationen Türschlösser<br />
Important product in<strong>for</strong>mation on locks<br />
In<strong>for</strong>mations importantes sur le serrures<br />
Zwingende Rechtsvorschriften müssen beachtet werden.<br />
Allgemeine Begriffe, soweit diese nicht in <strong>Katalog</strong>teilen<br />
und Bildern erläutert werden, sind in DIN 18250,<br />
DIN 18251, DIN 18252 und den Beschlagnormen definiert.<br />
Abweichungen von der Norm sind bei der<br />
Bestellung anzugeben.<br />
2. Fehlgebrauch<br />
Ein Fehlgebrauch – also die nicht bestimmungsgemäße<br />
Produktnutzung – von Schlössern liegt beispielsweise<br />
vor, wenn<br />
– durch das Einbringen von fremden und/oder nicht<br />
bestimmungsgemäßen Gegenständen in das<br />
Schloss oder in das Schließblech der einwandfreie<br />
Gebrauch verhindert wird,<br />
– ein Ein- oder Angriff an dem Schloss oder<br />
Schließblech vorgenommen wird, welcher eine<br />
Veränderung des Aufbaus, der Wirkungsweise<br />
oder der Funktion zur Folge hat,<br />
– zum Offenhalten der Tür der ausgeschlossene<br />
Schließriegel bestimmungswidrig genutzt wird,<br />
– die Verschlusselemente funktionsbehindernd<br />
montiert oder nachbehandelt werden, z. B. überlackieren,<br />
– nicht bestimmungsgemäße, über die normale<br />
Handkraft hinausgehende Lasten auf die<br />
Drückerverbindung gebracht werden,<br />
– nicht dazugehörige, z. B. maßlich abweichende<br />
oder falsch eingestellte Schließmittel verwendet<br />
werden,<br />
– eine Erweiterung oder Verringerung des ge<strong>for</strong>derten<br />
Türspalts beim Nachstellen der Scharniere<br />
oder beim Absenken der Türe entsteht,<br />
– eine nicht da<strong>für</strong> zugelassene Doppelflügeltür über<br />
den Standflügel geöffnet wird,<br />
– beim Schließen von Türen zwischen Türblatt und<br />
Zarge gegriffen wird,<br />
– eine gleichzeitige Drücker- und Schließwerkbetätigung<br />
erfolgt.<br />
3. Produktleistungen<br />
Sofern die Produktleistungen nicht in unseren <strong>Katalog</strong>en,<br />
Prospekten, Leistungsbeschreibungen etc. konkret<br />
festgelegt sind, müssen die An<strong>for</strong>derungen an den<br />
einzelnen Schlössern mit uns vereinbart werden.<br />
Richtungsweisend hierbei sind die Normen DIN 18250,<br />
DIN 18251, DIN 18252, DIN 18257 und die vorliegende<br />
Beschlagnorm.<br />
In diesen Normen sind die Grundan<strong>for</strong>derungen und<br />
die Zusatzan<strong>for</strong>derungen an Schlösser festgelegt. Der<br />
Inhalt der Norm kann sinngemäß auch auf andere<br />
Schlösser angewendet werden.<br />
Die Gebrauchstauglichkeit von Schlössern ist u. a.<br />
abhängig von Betätigungshäufigkeit, Betätigungsweise,<br />
Umgebungseinflüssen und Pflege.<br />
Schließzylinder und Schlüssel sind zu ersetzen, sobald<br />
trotz ordnungsgemäßer Schmierung Störungen insbesondere<br />
beim Einstecken oder beim Herausziehen des<br />
Schlüssels auftreten.<br />
If general terms are not explained in catalogue sections<br />
and diagrams, these are defined in DIN 18250, DIN<br />
18251, DIN 18252 and the door furniture standards.<br />
Deviations from the standards must be specified at<br />
the time of ordering.<br />
2. Misuse<br />
The following are examples of misuse of locks (i.e.<br />
improper use of the product):<br />
– Correct use of the lock is prevented by unsuitable<br />
and/or improper objects being introduced into the<br />
lock or into the striking plate.<br />
– The lock or the striking plate is interfered with or<br />
attacked, resulting in a change in its construction,<br />
operation or function.<br />
– The thrown locking deadbolt is used improperly<br />
to keep open the door.<br />
– The locking elements are installed or treated (e.g.<br />
painted over) in such a way as to prevent correct<br />
functioning.<br />
– Improper loads exceeding normal hand <strong>for</strong>ce are<br />
applied to the lever handle connection.<br />
– Inappropriate locking equipment is used (e.g. with<br />
dimension deviations or incorrect settings).<br />
– The required clearance between the door frame<br />
and door leaf is increased or reduced when the<br />
hinges are adjusted or when the door is lowered.<br />
– A double-sash door is opened improperly via the<br />
standing sash.<br />
– There is contact between the door leaf and the<br />
door frame when the door is locked.<br />
– The lever handle and the locking mechanism are<br />
used simultaneously.<br />
3. Product Per<strong>for</strong>mance<br />
If the product per<strong>for</strong>mance is not stipulated in concrete<br />
terms in our catalogues, brochures, specifications etc.,<br />
the requirements <strong>for</strong> the individual locks must be<br />
agreed upon with us.<br />
In this respect, product per<strong>for</strong>mance is based primarily<br />
on the standards DIN 18250, DIN 18251, DIN 18252, DIN<br />
18257 and on the above door furniture standard.<br />
The basic and additional requirements to be met by<br />
locks are specified in these standards. The contents of<br />
the standards can also be applied correspondingly to<br />
other locks.<br />
The merchantability of locks depends, in part, on the<br />
frequency and method of use, on the effects of the<br />
surroundings and on maintenance.<br />
Locking cylinders and keys must be replaced as soon as<br />
faults (in particular, when the key is inserted and<br />
removed) arise despite proper lubrication.<br />
4. Product Maintenance<br />
Locks must be lubricated with a suitable lubricant at<br />
least once per year (also more often, as required). In<br />
this regard, it must be checked and ensured that, <strong>for</strong><br />
example, the cylinder, door furniture and striking plate<br />
fit properly.<br />
The cleaning agents used should not contain any corroding<br />
constituents.<br />
Dans tous les autres cas, le fabricant, le vendeur, le<br />
responsable de la mise en oeuvre ou l’utilisateur de<br />
telles serrures doit s’assurer que le cylindre qu’il a choisi<br />
est bien adapté au montage et à l’utilisation prévue.<br />
Les dispositions juridiques obligatoires doivent être<br />
respectées.<br />
Dans la mesure où les termes généraux ne sont pas<br />
expliqués dans des parties de catalogue et des illustrations,<br />
ils sont définis dans les normes DIN 18250,<br />
DIN 18251, DIN 18252 et dans les normes sur les ferrres.<br />
Les divergences par rapport à la norme doivent être<br />
communiquées à la commande.<br />
2. Mauvaise utilisation<br />
Une mauvaise utilisation des serrures – donc une utilisation<br />
non con<strong>for</strong>me à la destination du produit – se<br />
produit par exemple dans les cas suivants:<br />
– lorsque l’utilisation correcte est empêchée par<br />
l’introduction d’objets étrangers et/ou non con<strong>for</strong>mes<br />
à l’utilisation dans la serrure ou dans la gâche,<br />
– lorsqu’une intervention ayant pour conséquence<br />
une modification de la conception, du mode d’action<br />
ou du fonctionnement est effectuée sur la<br />
serrure ou sur la gâche,<br />
– lorsque le pêne-dormant sorti sert à maintenir la<br />
porte ouverte, contrairement à sa destination,<br />
– lorsque les éléments de fermeture sont montés de<br />
manière à empêcher leur bon fonctionnement ou<br />
sont retouchés, p. ex. recouverts de peinture,<br />
– lorsque l’assemblage de la béquille est soumis à<br />
des charges non con<strong>for</strong>mes, dépassant la <strong>for</strong>ce<br />
normale de la main,<br />
– lorsque des accessoires de serrure inadaptés sont<br />
utilisés, p.ex. des accessoires présentant des cotes<br />
différentes ou mal réglés,<br />
– lorsqu’un agrandissement ou une diminution du<br />
jeu entre dormant et vantail de porte est obtenu<br />
en réglant la charnière ou en abaissant la porte,<br />
– lorsqu’une porte à double battants ouvrants non<br />
prévue à cet effet a été ouverte par le battant fixe,<br />
– lorsque la prise se fait entre le vantail et le dormant<br />
lors de la fermeture de la porte,<br />
– lorsque la béquille et la mécanique de fermeture<br />
sont actionnés simultanément.<br />
3. Prestations du produit<br />
Dans la mesure où les prestations du produit ne sont<br />
pas déterminées concrètement dans nos catalogues,<br />
prospectus, descriptions des prestations, etc. les exigences<br />
imposées aux divers serrures doivent être convenues<br />
avec nous.<br />
Dans ce contexte, la norme DIN 18250, DIN 18251, DIN<br />
18252, DIN 18257 et la présente norme de ferrures servent<br />
de directives.<br />
Dans ces normes sont fixées les exigences fondamentales<br />
et les exigences supplémentaires imposées aux<br />
serrures. La teneur de la norme peut également être<br />
appliquée par analogie à d’autres serrures.<br />
i14
Allgemeine In<strong>for</strong>mationen<br />
General in<strong>for</strong>mations<br />
In<strong>for</strong>mations générales<br />
Wichtige Produktin<strong>for</strong>mationen Türschlösser<br />
Important product in<strong>for</strong>mation on locks<br />
In<strong>for</strong>mations importantes sur le serrures<br />
Zusammenhang zu überprüfen und sicherzustellen.<br />
Es sollten nur solche Reinigungsmittel verwendet werden,<br />
die keine korrosionsfördernden Bestandteile enthalten.<br />
5. In<strong>for</strong>mations- und Instruktionspflichten<br />
Zur Erfüllung der In<strong>for</strong>mations- und Instruktionspflichten<br />
nach dem Produkthaftungsgesetz stehen den<br />
Fachhändlern, Schlüsseldiensten, Architekten, Planern,<br />
Verarbeitern oder Benutzern folgende Unterlagen und<br />
Dienste auf An<strong>for</strong>derung zur Verfügung:<br />
– <strong>Katalog</strong>e, Prospekte,<br />
– Ausschreibungstexte, Angebotsunterlagen,<br />
Schließpläne,<br />
– DIN 18250, DIN 18251, DIN 18252, DIN 18257<br />
(Alleinverkauf durch Beuth Verlag GmbH, Berlin),<br />
– Anleitung <strong>für</strong> den Einbau, Bedienung und Pflege,<br />
– Beratung durch uns bzw. durch unseren<br />
Außendienst.<br />
Zur Auswahl von Schlössern sowie zum Einbau, zur<br />
Bedienung und zur Pflege sind<br />
– Architekten und Planer gehalten, alle er<strong>for</strong>derlichen<br />
Produktin<strong>for</strong>mationen von uns anzu<strong>for</strong>dern<br />
und zu beachten,<br />
– Fachhändler gehalten, die Produktin<strong>for</strong>mationen<br />
und Hinweise in den Preislisten zu beachten und<br />
insbesondere alle er<strong>for</strong>derlichen Anleitungen von<br />
uns anzu<strong>for</strong>dern und an die Verarbeiter weiterzugeben,<br />
– Verarbeiter gehalten, alle Produktin<strong>for</strong>mationen<br />
zu beachten und insbesondere Bedienungs- und<br />
Pflegeanleitungen von uns anzu<strong>for</strong>dern und an<br />
die Auftraggeber und Benutzer weiterzugeben.<br />
i15<br />
5. Obligation to Provide In<strong>for</strong>mation and Instructions<br />
In order to fulfil our obligations to provide in<strong>for</strong>mation<br />
and instructions in accordance with the “Product<br />
Liability Law”, the following documents and services<br />
are made available, upon request, to the specialised<br />
dealers, key-cutting services, architects, planners, processors<br />
and users:<br />
– catalogues, brochures,<br />
– texts of invitations to tender, proposal documents,<br />
locking plans,<br />
– DIN 18250, DIN 18251, DIN 18252, DIN 18257<br />
(exclusive sale by Beuth Verlag GmbH, Berlin),<br />
– instructions <strong>for</strong> installation, operation and maintenance,<br />
– advice from us and from our field service.<br />
With regard to the selection of locks and their installation,<br />
operation and maintenance:<br />
– architects and planners must request from us all<br />
the necessary product in<strong>for</strong>mation, which they<br />
must also observe,<br />
– specialised dealers must observe the product<br />
in<strong>for</strong>mation and the instructions in the price lists<br />
and, in particular, they must request from us all<br />
the necessary instructions and pass these on to<br />
the processors,<br />
– processors must observe all the product in<strong>for</strong>mation<br />
and, in particular, must request from us operating<br />
and maintenance instructions and pass<br />
these on to the customers and users.<br />
L’aptitude à l’utilisation de serrures est entre autres<br />
fonction de la fréquence d’actionnement, du mode<br />
d’actionnement, des conditions de l’environnement et<br />
de l’entretien.<br />
Les cylindres de serrure et les clés doivent être remplacés<br />
dès qu’il se produit des perturbations malgré une<br />
lubrification correcte, surtout lorsque l’on introduit ou<br />
que l’on enlève la clé.<br />
4. Entretien des produits<br />
Les serrures doivent être lubrifiées avec un lubrifiant<br />
adéquat au moins une fois par an – plus fréquemment<br />
si elles sont beaucoup sollicitées. Dans ce contexte, il y<br />
a lieu de contrôler et de s’assurer p. ex. si le cylindre, les<br />
ferrures et la gâche sont bien en place.<br />
Utiliser uniquement des produits de nettoyage ne contenant<br />
pas de composants favorisant la corrosion.<br />
5. Obligations d’in<strong>for</strong>mation et d’instruction<br />
Pour que les commerçants spécialisés, les serruriers, les<br />
architectes, les projeteurs, les responsables de la mise<br />
en œuvre et les utilisateurs puissent satisfaire à leurs<br />
obligations en matière d’in<strong>for</strong>mation et d’instruction,<br />
ils disposent des documents et des services suivants<br />
sur demande:<br />
– catalogues, prospectus,<br />
– textes d’appel d’offres, documents d’offre, organigrammes<br />
de fermeture,<br />
– DIN 18250, DIN 18251, DIN 18252, DIN 18257<br />
(vente exclusive auprès de Beuth Verlag GmbH,<br />
Berlin),<br />
– manuel de montage, mode d’emploi et manuel<br />
d’entretien,<br />
– conseil par nos services ou nos représentants.<br />
Pour le choix des serrures ainsi que le montage, le<br />
mode d’emploi et l’entretien:<br />
– les architectes et les projeteurs sont tenus de<br />
nous demander toutes les in<strong>for</strong>mations nécessaires<br />
sur les produits et de les prendre en considération,<br />
– les commerçants spécialisés sont tenus de prendre<br />
en considération les in<strong>for</strong>mations sur les produits<br />
et les instructions mentionnées dans les<br />
listes de prix, en particulier de nous demander<br />
toutes les instructions et de les remettre aux responsables<br />
de la mise en oeuvre,<br />
– les responsables de la mise en oeuvre sont tenus<br />
de respecter toutes les in<strong>for</strong>mations sur les produits<br />
et en particulier de nous demander le mode<br />
d’emploi et les instructions d’entretien et de les<br />
remettre aux utilisateurs.
Allgemeine In<strong>for</strong>mationen<br />
General in<strong>for</strong>mations<br />
In<strong>for</strong>mations générales<br />
Vertretungen/Fachberatungen Deutschland<br />
Sales Representatives and Technical Advisers Germany<br />
Representants et conseillers techniques en Allemagne<br />
Nordrhein-Westfalen<br />
Niedersachsen<br />
Bocholt<br />
Paderborn<br />
Hamm<br />
Göttingen<br />
Recklinghsn<br />
Unna<br />
Duisburg Dortmund<br />
Essen<br />
D´dorf<br />
Kassel<br />
W´tal Iserlohn<br />
Velbert<br />
Winterbg Eschwege<br />
4 Werdohl<br />
Bad Wildungen<br />
Köln<br />
Siegen<br />
Aachen Bonn<br />
Wissen<br />
Hellenthal<br />
Saarland<br />
B. Neuenahr<br />
Kruft<br />
Cochem<br />
Emden<br />
Münster<br />
Oldenbg<br />
Neuwied<br />
Koblenz Wiesbdn<br />
Rheinland-Pfalz<br />
Ludwigshafen<br />
5<br />
Baden-Württemberg<br />
Freiburg<br />
Bremerhvn<br />
Osnabrück<br />
Mainz<br />
Hessen<br />
Cuxhaven<br />
Bremen<br />
Bielefeld<br />
Darmstadt<br />
Weinheim<br />
Mannheim<br />
Karlsruhe<br />
Frankfurt<br />
6<br />
Schleswig Holstein<br />
Flensbg<br />
7<br />
Hamburg<br />
Würzburg<br />
Wolfsbg<br />
10<br />
8<br />
9<br />
Sachsen-Anhalt<br />
Thüringen<br />
Schwerin<br />
Hechthsn<br />
Ludwiglust<br />
Buxtehude<br />
Tosted<br />
Grabow<br />
Egestor<br />
Uelzen<br />
Gartow<br />
Lüchow<br />
Stuttgart<br />
Ulm<br />
Lübeck<br />
Hannover<br />
Fürth<br />
Erfurt<br />
Ingolstadt<br />
Augsburg<br />
Neu-Ulm<br />
Magdeburg<br />
Halle<br />
Erlangen<br />
Jena Gera<br />
Nürnberg<br />
München<br />
Rostock<br />
Plauen<br />
2<br />
3<br />
Bayern<br />
Mecklenburg-Vorpommern<br />
Neubrandenburg Strosbg<br />
Brussow<br />
Röbel<br />
Mirow<br />
Leipzig<br />
Potsdam<br />
Berlin<br />
Herzberg<br />
Chemnitz<br />
Zwickau<br />
Regensburg<br />
Cottbus<br />
Dresden<br />
Brandenburg<br />
Sachsen<br />
i16
Allgemeine In<strong>for</strong>mationen<br />
General in<strong>for</strong>mations<br />
In<strong>for</strong>mations générales<br />
Verkaufsgebiete Deutschland<br />
Sales Areas Germany<br />
Zone de vente en Allemagne<br />
i17<br />
Verkaufsgebiet 2<br />
Lutz Franke<br />
Werksreisender<br />
Landsberger Straße 167<br />
12623 Berlin<br />
Telefon (0 30) 56 49 79 77<br />
Telefax (0 30) 56 49 79 76<br />
l.franke@kfv.de<br />
Verkaufsgebiet 3<br />
Frank/Riegelbauer<br />
Beethovenstraße 6<br />
73257 Köngen<br />
Telefon (0 70 24) 98 80 20<br />
Telefax (0 70 24) 98 80 22<br />
p.frank.gmbh@t-online.de<br />
Büro Sachsen<br />
Matthias Wiedemann<br />
Luther Straße 36<br />
02826 Görlitz<br />
Telefon (0 35 81) 41 17 71<br />
Telefax (0 35 81) 41 17 72<br />
matthiaswiedemann@t-online.de<br />
Büro Thüringen<br />
Uwe Thoma<br />
Am Schösserholz 22<br />
09127 Chemnitz<br />
Telefon (03 71) 77 23 73<br />
Telefax (03 71) 7 71 03 74<br />
thoma-chemnitz@t-online.de<br />
Verkaufsgebiet 4<br />
Heiming & Thomas oHG<br />
Werksvertretungen<br />
Büro Essen<br />
Helmut Heiming<br />
Richard-Wagner-Straße 25<br />
45128 Essen<br />
Telefon (02 01) 22 84 24<br />
Telefax (02 01) 23 72 55<br />
ht-essen@gmx.de<br />
Büro Meerbusch<br />
Uwe Thomas<br />
FriedebergerWeg 19a<br />
40667 Meerbusch<br />
Telefon (0 21 32) 81 62<br />
Telefax (0 21 32) 81 64<br />
ht-meerbusch@t-online.de<br />
Büro Wenden<br />
Michael Niederschlag<br />
Oberer Falkenweg 18<br />
57482 Wenden<br />
Telefon (0 27 62) 92 81 18<br />
Telefax (0 27 62) 92 81 19<br />
ht-wenden@gmx.de<br />
Verkaufsgebiet 5<br />
Lars Buchner<br />
Handelsvertreter CDH<br />
Postfach 1225<br />
65702 Hofheim<br />
Telefon (0 61 92) 3 73 09<br />
Telefax (0 61 92) 3 87 95<br />
info@buchner-baubeschlag.de<br />
Verkaufsgebiet 6<br />
Peter Frank GmbH<br />
Industrievertretungen<br />
Postfach 12 27<br />
73254 Köngen<br />
Telefon (0 70 24) 98 80 20<br />
Telefax (0 70 24) 98 80 22<br />
p.frank.gmbh@t-online.de<br />
Verkaufsgebiet 7<br />
Karl Kregeler<br />
Werksvertretungen GmbH<br />
Alter Postweg 22<br />
32120 Hiddenhausen<br />
Telefon (0 52 21) 96 75 - 0<br />
Telefax (0 52 21) 96 75 - 44<br />
info@kregeler-werksvertretungen.de<br />
Verkaufsgebiet 8<br />
Lilge Werksvertretungen<br />
Dipl.-Ing. Horst Klingsohr<br />
Herrenstraße 11 b<br />
94469 Deggendorf<br />
Telefon (09 91) 3 79 02 00<br />
Mobil (01 71) 7 4615 51<br />
Telefax (09 91) 2 90 1832<br />
klingsohr@onlinehome.de<br />
Verkaufsgebiet 9<br />
Scheerschmidt & Drossel<br />
Werksvertretungen<br />
Postfach 650123<br />
22361 Hamburg<br />
Telefon (0 40) 6 02 06 22<br />
Telefax (0 40) 6 02 06 23<br />
s.u.d@gmx.de<br />
Verkaufsgebiet 10<br />
Olaf Bornkeßel<br />
Am Fuchsberg 53<br />
39175 Heyrothsberge<br />
Telefon (03 92 92) 6 58 36<br />
Telefax (03 92 92) 6 58 37<br />
Mobil (01 71) 5 52 69 95<br />
o.bornkessel@kfv.de
Allgemeine In<strong>for</strong>mationen<br />
General in<strong>for</strong>mations<br />
In<strong>for</strong>mations générales<br />
Vertretungen international<br />
Sales Areas International<br />
Representants internationaux<br />
Australia Klockner Agencies<br />
35, Jikara Drive<br />
AUS-Glen Osmond, South Australia 5064<br />
Tel. (08)83730055 · Fax (08)83382027<br />
Bahrain Alleinvertrieb / Exclusive Distributor:<br />
ELAMES Trading & Contracting<br />
P.O. Box 26095<br />
BAH-Manama<br />
Tel. 701166 · Fax 700574<br />
elames@batelco.com.bh<br />
Belgium Desmedt, Symphorien<br />
Tombroekstraat 101<br />
B-8510 Kortrijk-Rollegem<br />
Tel. (056) 217181 · Fax (056)222581<br />
Czech Republic Frank/Riegelbauer<br />
Beethovenstraße 6<br />
D-73257 Köngen<br />
Tel. (49 70 24) 988020 · Fax (497024)988022<br />
p.frank.gmbh@t-online.de<br />
Denmark MILA Beslag A/S<br />
Boegeskovvej 6<br />
DK-3490 Kvistgard<br />
Tel. (49) 139900 · Fax (49)139893<br />
mila-info@mila.dk<br />
Egypt Tecnodor Architectural Hardware<br />
Eng. Siham Abdel Halim<br />
(Project Coordinator)<br />
20, El-Horrya Street<br />
ET-Heliopolis – Cairo<br />
First Floor, Flat No. 102<br />
Tel. (2) 2906057 · Fax (2)4196040<br />
tecnodor@gega.net<br />
France KFV-France<br />
9, Rue Léon Vaudoyer<br />
F-66100 Perpignan<br />
Tel. (04) 68668089 · Fax (04)68667961<br />
jp.ricard@kfv.de<br />
Great Britain KFV-UK<br />
Unit 7, Sir Frank Whittle Business Centre<br />
Great Central Way, Butlers Leap,<br />
GB-Rugby,Warwickshire CV21 3XH<br />
Tel: 01788 552900 • Fax: 01788 552922<br />
s.adams@kfv.de • p.andrew@kfv.de<br />
Greece<br />
Werksreisender/Technisch Advizeur:<br />
Serge Leclerc<br />
275 Place Félix Moinil · B-5300 Andenne<br />
Tel. +32/85844297 · Fax +32/85844297<br />
s.leclerc@kfv.de<br />
Noel Roebben<br />
Diepstraat 6/10 · B-3511 Kuringen-Hasselt<br />
Tel. 011/851622 · Fax 011/851622<br />
n.roebben@kfv.de<br />
Werksreisender/Technisch Advizeur:<br />
Bernd Roy<br />
Steinhagen 24 • 44793 Bochum<br />
Tel.: +49 (0) 234-12512 & +49 (0) 2051-278466<br />
Fax: +49 (0) 234-6405346<br />
Mobil: (0171) 2205062<br />
b.roy@kfv.de<br />
Werksreisender/Technisch Advizeur:<br />
Alfons Fliß<br />
Wehdenweg 34 · D-24148 Kiel<br />
Tel. +49 431/16336<br />
Fax +49 431/6912287<br />
a.fliss@kfv.de<br />
Werksreisender/Technisch Advizeur:<br />
Bernd Roy<br />
Steinhagen 24 • 44793 Bochum<br />
Tel.: +49 (0) 234-12512 & +49 (0) 2051-278466<br />
Fax: +49 (0) 234-6405346<br />
Mobil: (0171) 2205062<br />
b.roy@kfv.de<br />
i18
Allgemeine In<strong>for</strong>mationen<br />
General in<strong>for</strong>mations<br />
In<strong>for</strong>mations générales<br />
Vertretungen international<br />
Sales Areas International<br />
Representants internationaux<br />
Iceland Aseta Ltd.<br />
Armula 16<br />
Box 8595<br />
IS-128 Reykjavik<br />
Tel. (354) 5331600 · Fax (354)5331610<br />
aseta@aseta.is<br />
Indonesia P.T. Seni Mulia<br />
JI. Panglima Polim Raya No. 25<br />
RI-Jakarta 12160<br />
Tel. (21)7261230 · Fax (21)7261133<br />
snimulia@uninet.net.id<br />
seni_mrkt@hotmail.com<br />
senimulia@centrin.net.id<br />
i19<br />
C.V. International Hardware Services<br />
JI. Pekojan No. 41<br />
RI- Jakarta Barat 11240<br />
Tel. (21)6913975 oder 6914279 · Fax (21)6911368<br />
ihs@pacific.net.id<br />
Iran AFAN TRADING CO.<br />
P.O. Box 11365/1565<br />
Vafa Bldg. No. 405<br />
IR-Tehran<br />
Tel. (021)6467575 · Fax (021)6416485<br />
Ireland KFV-UK<br />
Unit 7, Sir Frank Whittle Business Centre<br />
Great Central Way, Butlers Leap,<br />
GB-Rugby,Warwickshire CV21 3XH<br />
Tel: +44 1788 552900 • Fax: +44 1788 552922<br />
s.adams@kfv.de • p.andrew@kfv.de<br />
Italy FCM<br />
Carlo Alberto Galvagnini<br />
Via Tesio 23/A<br />
I-20151 Milano<br />
Tel. +39/335/8074268<br />
Fax +39/02/700593021<br />
c.galvagnini@inwind.it<br />
Kuwait Alleinvertrieb / Exclusive Distributor:<br />
Door Service Center Co. W.L.L.<br />
P.O. Box 823, Safat<br />
KWT-13009 Safat<br />
Tel. 4839084 · Fax 4841582<br />
dsc@alayoub.com<br />
Luxemburg Desmedt, Symphorien<br />
Tombroekstraat 101<br />
B-8510 Kortrijk-Rollegem<br />
Tel. +3256 217181 · Fax +3256 222581<br />
The Netherlands Themans BV<br />
Litauensestraat 9<br />
NL- 7202 CN Zutphen<br />
Tel. (0575)595700 · Fax (0575)541357<br />
themans@themans.nl<br />
Werksreisender/Consulente Tecnico:<br />
Ernst Fabrizio Vitale<br />
Via Adda, 7<br />
I-26844 Casal Pusterllengo (LO)<br />
Tel. +39/328/2317130<br />
Fax +39/06/233238303<br />
f.vitale@kfv.de<br />
Werksreisender/Technisch Advizeur:<br />
Serge Leclerc<br />
275 Place Félix Moinil · B-5300 Andenne<br />
Tel. +32/85844297 · Fax +32/85844297<br />
s.leclerc@kfv.de<br />
Werksreisender/Technisch Advizeur:<br />
Marc Bruinink<br />
Zenderseweg 60 · NL-7665TN Albergen<br />
Tel. +31/546442605 · Fax +31/546442314<br />
m.bruinink@kfv.de<br />
Noel Roebben<br />
Diepstraat 6/10 · B-3511 Kuringen-Hasselt<br />
Tel. +32/11/851622 · Fax +32/11/851622<br />
n.roebben@kfv.de
Allgemeine In<strong>for</strong>mationen<br />
General in<strong>for</strong>mations<br />
In<strong>for</strong>mations générales<br />
Vertretungen international<br />
Sales Areas International<br />
Representants internationaux<br />
Norway MILA Beslag A/S<br />
Boegeskovvej 6<br />
DK-3490 Kvistgard<br />
Tel. (4549)139900 · Fax (4549)139893<br />
milainfo@mila.dk<br />
Oman Alleinvertrieb / Exclusive Distributor:<br />
Delta Co. Ltd.<br />
P.O. Box 1537<br />
Code 112 R u w i<br />
Sultanate of Oman<br />
Tel. 708483 · Fax 708502<br />
deltaco@gto.net.om<br />
Poland mgr Mariusz Domoradzki<br />
Nizinna 13 B/3<br />
PL-61-424 Poznan<br />
Tel. kom.: +48/502-364866 • Fax: +48/618301946<br />
m.domoradzki@kfv.pl<br />
Slovakia<br />
Spain VBH-MALUM S.L.<br />
Calle Agricultura 37 E<br />
E-08840 Viladecans (Barcelona)<br />
Tel. 093-6373470 · Fax 093-6379630<br />
info@vbh-malum.com<br />
Sweden MILA Beslag A/S<br />
Boegeskovvej 6<br />
DK-3490 Kvistgard<br />
Tel. (4549)139900 · Fax (4549)139893<br />
milainfo@mila.dk<br />
Switzerland CFA AG<br />
Stelvio<br />
CH-7536 Sta. Maria<br />
Tel. +41 81 858 72 14 · Fax +41 81 858 50 37<br />
fadri@cfa-ag.ch<br />
United Arab Emirates Alleinvertrieb / Exclusive Distributor:<br />
HAROON COMPANY W.L.L.<br />
Architectural Hardware Specialists<br />
P.O. Box 6747<br />
Sharjah<br />
UAE-United Arab Emirates<br />
Tel. (6)5337338 · Fax (6)5331819<br />
haroonco@emirates.net.ae<br />
United States Olympic Marketing International Inc.<br />
John Loperfido<br />
862 W. Coco Plum Circle<br />
United States of America<br />
Plantation, FL 33324<br />
Tel. 001-954-4767740 · Fax 001-954-3703511<br />
johnloperfido@att.net<br />
Werksreisender/Technical Adviser:<br />
Alfons Fliß<br />
Wehdenweg 34<br />
D-24148 Kiel<br />
Tel. +49 431/16336<br />
Fax +49 431/6912287<br />
a.fliss@kfv.de<br />
Werksreisender/Technical Adviser:<br />
Bernd Roy<br />
Steinhagen 24 • 44793 Bochum<br />
Tel.: +49 (0) 234-12512 & +49 (0) 2051-278466<br />
Fax: +49 (0) 234-6405346<br />
Mobil: (0171) 2205062<br />
b.roy@kfv.de<br />
Werksreisender / Technical Adviser:<br />
Jean-Philippe Ricard<br />
9, Rue Léon Vaudoyer<br />
F-66100 Perpignan<br />
Tel. +33 468668089<br />
Fax +33 468667961<br />
jp.ricard@kfv.de<br />
Werksreisender/Technical Adviser:<br />
Alfons Fliß<br />
Wehdenweg 34<br />
D-24148 Kiel<br />
Tel. +49 431/16336<br />
Fax +49 431/6912287<br />
a.fliss@kfv.de<br />
i20
Allgemeine In<strong>for</strong>mationen<br />
General in<strong>for</strong>mations<br />
In<strong>for</strong>mations générales<br />
Allgemeine Geschäftsbedingungen<br />
General Conditions of Sale<br />
Conditions générales de vente<br />
1. Allgemeines<br />
1.1 Für unsere sämtlichen - auch zukünftigen -<br />
Lieferungen einschließlich Beratungs- und sonstigen<br />
Nebenleistungen gelten ausschließlich die<br />
nachstehenden Allgemeinen Verkaufsbedingungen,<br />
sofern der Kunde Unternehmer, eine juristische<br />
Person des öffentlichen Rechts oder ein<br />
öffentlich-rechtliches Sondervermögen ist.<br />
Bedingungen des Kunden wird hiermit widersprochen.<br />
1.2 Vereinbarungen, insbesondere soweit sie diese<br />
Bedingungen abändern, bedürfen zu ihrer Wirksamkeit<br />
unserer schriftlichen Bestätigung. Auf die<br />
Einhaltung dieses Schrift<strong>for</strong>mer<strong>for</strong>dernisses kann<br />
nur durch schriftliche Erklärung unsererseits verzichtet<br />
werden.<br />
1.3 Wir übernehmen <strong>für</strong> die von uns geschuldeten<br />
Lieferungen keine Garantie und kein Beschaffungsrisiko.<br />
Sämtliche Verpflichtungen unsererseits<br />
stehen unter dem Vorbehalt ordnungsgemäßer<br />
Selbstbelieferung.<br />
1.4 Vorbehaltlich Ziffer 1.5 bleiben sämtliche unserer<br />
Unterlagen, insbesondere unsere Prospekte, <strong>Katalog</strong>e,<br />
Preislisten, Abbildungen, Zeichnungen und<br />
Kalkulationen in unserem Eigentum. Die Unterlagen<br />
dürfen ohne unsere schriftliche Zustimmung<br />
weder vervielfältigt noch Dritten zugänglich<br />
gemacht werden. Sollte der Kunde hiergegen<br />
verstoßen, können wir einen pauschalen Schadenersatz<br />
in Höhe von 5 % der möglichen Vertragssumme<br />
verlangen. Die Möglichkeit der Geltendmachung<br />
eines weitergehenden Schadens bleibt<br />
hiervon unberührt. Dem Kunden wird der Nachweis<br />
gestattet, dass uns kein oder ein wesentlich<br />
geringerer Schaden als die Pauschale entstanden<br />
ist.<br />
1.5 Der Kunde muss sicherstellen, dass unsere<br />
Produktin<strong>for</strong>mationen (z.B. Gebrauchs-, Wartungsund<br />
Pflegeanleitungen) den jeweiligen Adressaten<br />
(z.B. Endabnehmern) zugehen. Die hier<strong>für</strong><br />
er<strong>for</strong>derlichen Unterlagen stellen wir - soweit<br />
nicht schon von uns mitgeliefert - dem Kunden<br />
auf schriftliche An<strong>for</strong>derung zur Verfügung.<br />
1.6 Auf Wunsch des Kunden angefertigte Muster werden<br />
gesondert berechnet. Wir sind nicht zur Rücknahme<br />
verpflichtet.<br />
1.7 Sämtliche Urheber-/Nutzungsrechte verbleiben<br />
bei uns.<br />
1.8 Eine Übertragung der Rechte des Kunden aus mit<br />
uns geschlossenen Verträgen ist nur zulässig,<br />
wenn wir dem zuvor schriftlich zugestimmt<br />
haben.<br />
2. Preise, Zahlungen, Sicherheiten<br />
2.1 Unsere Preise verstehen sich in EURO ab Werk<br />
exklusive Verpackung, die gesondert berechnet<br />
und nicht zurückgenommen wird. Hinzu kommt<br />
die jeweils gültige gesetzliche Umsatzsteuer.<br />
2.2 Kommt es zu wesentlichen Änderungen von<br />
Kostenfaktoren, insbesondere der Löhne, der<br />
Materialpreise oder Frachtkosten, können wir vereinbarte<br />
Preise entsprechend dem Einfluß der<br />
geänderten Kostenfaktoren in angemessenem<br />
Umfang anpassen.<br />
Erfolgt die Lieferung aus vom Kunden zu vertretenden<br />
Gründen nicht zum vereinbarten Termin<br />
oder nicht innerhalb der vereinbarten Zeit und<br />
sind seit Vertragsschluss mehr als 4 Monate vergangen,<br />
sind wir berechtigt, unsere dann jeweils<br />
geltenden Listenpreise zu berechnen.<br />
2.3 Unsere Forderungen sind ohne Abzug innerhalb<br />
von 30 Tagen ab Rechnungsdatum fällig. Bei<br />
Zahlung innerhalb von 8 Tagen gewähren wir 3 %<br />
Skonto, falls der Kunde nicht mit der Begleichung<br />
anderer Forderungen im Verzug ist.<br />
2.4 Bei Zahlungsverzug oder bei Gefährdung unserer<br />
Forderungen durch Verschlechterung der Kreditwürdigkeit<br />
des Kunden können wir unsere sämtli-<br />
i21<br />
1. General<br />
1.1 The following General Conditions of Sale apply to<br />
all our deliveries – also future deliveries – including<br />
consultations and other incidental services,<br />
provided that the Buyer is an entrepreneur, a<br />
public corporation or a separate estate subject to<br />
public law. The terms of the Buyer are hereby<br />
opposed.<br />
1.2 Any agreements, especially insofar as they alter<br />
these conditions, must be confirmed in writing in<br />
order to be valid. Compliance with the requirement<br />
to have this confirmed in writing can only<br />
be waived by a written statement on our part.<br />
1.3 We accept neither liability <strong>for</strong> deliveries initiated<br />
by us nor the risk of procurement. All obligations<br />
on our side are subject to proper delivery by our<br />
suppliers.<br />
1.4 Subject to 1.5, all our documentation, especially<br />
our brochures, catalogues, price lists, images,<br />
drawings and calculations, remain our property.<br />
The documentation may not be copied or made<br />
available to a third party without our written permission.<br />
If the Buyer should breach this rule, we<br />
are within our right to demand a flat-rate sum in<br />
damages to the value of 5% of the possible sum<br />
arising from the contract. This does not affect the<br />
possibility of claiming any further damages. The<br />
Buyer will be allowed to prove that we have suffered<br />
no damage or that any damage caused was<br />
less than the value of the flat rate.<br />
1.5 The Buyer must make sure that our product in<strong>for</strong>mation<br />
(e.g. instructions on use, maintenance and<br />
care) go to the respective addressee (e.g. end<br />
user). We can supply the Buyer with the documentation<br />
necessary <strong>for</strong> this – if not already sent –<br />
upon the Buyer’s submission of a written request<br />
<strong>for</strong> it.<br />
1.6 Any samples made at the Buyer’s request will be<br />
invoiced separately. We are not obliged to take<br />
any such samples back.<br />
1.7 We retain all copyright and rights of use.<br />
1.8 Any transfer of the rights of the Buyer arising<br />
from contracts signed with us is only allowed<br />
with our prior written permission.<br />
2. Prices, Payment, Deposits<br />
2.1 Our prices are in EUROs ex works, excluding<br />
packaging which is charged extra and which cannot<br />
be returned to us. The relevant value added<br />
tax is also charged.<br />
2.2 If there are substantial changes in cost factors,<br />
especially wages, prices of materials or shipping<br />
costs, we reserve the right to adjust the agreed<br />
prices to an appropriate extent in accordance with<br />
the effect of the changed cost factors.<br />
If delivery cannot take place on the agreed date or<br />
within the agreed period of time due to reasons<br />
on the Buyer’s part and if more than 4 months<br />
have passed since the contract was signed, we are<br />
entitled to charge the currently valid list prices.<br />
2.3 Our invoices are due and payable in full within<br />
30 days after the date of the invoice. Payments<br />
within 8 days will be granted a 3% cash discount,<br />
if the Buyer is not in arrears with the payment of<br />
any other demands.<br />
2.4 If there is any delay in payment or if our demands<br />
are endangered by the our Buyer’s worsening creditworthiness,<br />
we are entitled to demand immediate<br />
payment of all our invoices, independent of<br />
the term of any bills of exchange, and/or demand<br />
security. Furthermore, we are entitled to carry out<br />
any outstanding deliveries only against payment<br />
in advance or against the provision of security.<br />
Should the Buyer refuse to pay in advance or provide<br />
security, we can withdraw from the contract<br />
and claim <strong>for</strong> damages. Moreover we can, without<br />
withdrawing from the contract, prohibit the processing<br />
and disposal of goods delivered by us –<br />
1. Généralités<br />
1.1 Sont valables exclusivement pour l’ensemble de<br />
nos livraisons et fournitures - également pour nos<br />
livraisons et fournitures futures - y compris toutes<br />
prestations conseils et autres prestations auxiliaires,<br />
les Conditions Générales de vente exposées ciaprès,<br />
dans la mesure où le client est un entrepreneur,<br />
une personne morale de droit public ou un<br />
établissement public à budget spécial. Il est fait<br />
par là-même opposition aux conditions du client.<br />
1.2 Toutes conventions, en particulier dans la mesure<br />
où elles constituent une modification des présentes,<br />
ne sont valables que si elles ont été confirmées<br />
par écrit par nous. Le renoncement au<br />
respect de la <strong>for</strong>me écrite ne peut avoir lieu que<br />
sur déclaration écrite de notre part.<br />
1.3 Nous n’assumons aucune garantie et aucun risque<br />
d’acquisition pour les livraisons et fournitures que<br />
nous devons. L’ensemble des engagements de<br />
notre part s’entendent sous réserve d’une livraison<br />
correcte par nos fournisseurs.<br />
1.4 Sous réserve du paragraphe 1.5, l’ensemble de nos<br />
documents, en particulier nos prospectus, catalogues,<br />
listes de prix, illustrations, croquis et plans<br />
et calculs restent notre propriété. Toute reproduction<br />
de ces documents ou communication à des<br />
tiers sans notre accord écrit sont interdites. En cas<br />
d’infraction à cette clause, nous exigerons du<br />
client un <strong>for</strong>fait de dommages et intérêts d’un<br />
montant de 5 % de la somme possible du marché.<br />
Ceci ne touche en rien la possibilité de faire valoir<br />
des dommages et intérêts allant au-delà. Le client<br />
a la possibilité d’apporter la preuve que nous<br />
n’avons pas subi de dommage ou que nous avons<br />
subi un dommage sensiblement inférieur au <strong>for</strong>fait.<br />
1.5 Le client doit assurer que nos in<strong>for</strong>mations produits<br />
(par exemple instructions de service, de maintenance<br />
et d’entretien) parviennent bien au destinataire<br />
correspondant (par exemple client final).<br />
Nous mettons à la disposition du client, sur<br />
demande écrite, les documents nécessaires pour<br />
cela - dans la mesure où nous ne les avons pas<br />
fournis d’office -.<br />
1.6 Les échantillons fabriqués à la demande du client<br />
sont facturés séparément. Nous ne sommes pas<br />
tenus de les reprendre.<br />
1.7 Nous conservons tous droits d’auteur et sur la<br />
propriété intellectuelle/tous droits de jouissance.<br />
1.8 Une cession des droits du client résultant des contrats<br />
passés avec nous n’est possible que si nous y<br />
avons consenti par écrit.<br />
2. Prix, paiements, garanties<br />
2.1 Nos prix s’entendent en EUROS départ usine hors<br />
emballage, qui est facturé séparément et qui n’est<br />
pas repris. S’y ajoute la T.V.A. respectivement en<br />
vigueur.<br />
2.2 En cas de changements importants des facteurs<br />
de coûts, en particulier des salaires, des prix du<br />
matériau ou des frais de transport, nous sommes<br />
en droit de modifier les prix convenus dans des<br />
limites raisonnables en fonction de l’incidence des<br />
facteurs de coûts modifiés.<br />
Si, pour des raisons relevant de la responsabilité<br />
du client, la livraison n’a pas lieu à la date convenue<br />
ou dans le délai convenu et si plus de 4 mois<br />
se sont écoulés depuis la passation du contrat, nous<br />
sommes en droit de facturer nos prix alors en<br />
vigueur en fonction de notre liste de prix actuels.<br />
2.3 Nos créances sont payables sans déduction aucune<br />
dans les 30 jours à compter de la date de facturation.<br />
En cas de paiement dans les 8 jours, nous<br />
accordons 3 % d’escompte dans la mesure où le<br />
client n’est pas en retard de paiement pour d’autres<br />
créances.<br />
2.4 En cas de retard de paiement ou en cas d’atteinte<br />
à nos créances en raison d’une détérioration de
Allgemeine In<strong>for</strong>mationen<br />
General in<strong>for</strong>mations<br />
In<strong>for</strong>mations générales<br />
Allgemeine Geschäftsbedingungen<br />
General Conditions of Sale<br />
Conditions générales de vente<br />
lichen Forderungen, unabhängig von der Laufzeit<br />
etwaiger Wechsel, fällig stellen und/oder Sicherheiten<br />
verlangen. Ferner sind wir berechtigt, noch<br />
ausstehende Lieferungen nur gegen Vorauszahlung<br />
oder gegen Stellung von Sicherheiten auszuführen.<br />
Verweigert der Kunde Vorauszahlungen<br />
oder Sicherheitsleistungen, können wir vom Vertrag<br />
zurücktreten und Schadenersatz verlangen.<br />
Darüber hinaus können wir, ohne vom Vertrag<br />
zurückzutreten, die Verarbeitung und Veräußerung<br />
der von uns gelieferten Ware - auch soweit<br />
sie bereits verarbeitet ist - untersagen, die Einziehungsermächtigung<br />
gemäß Ziffer 5.7 widerrufen<br />
und Rückgabe der Ware auf Kosten des<br />
Kunden verlangen, ohne dass dem Kunden ein<br />
Zurückbehaltungs- oder ähnliches Recht zusteht.<br />
Zurückgenommene Ware wird von uns durch freihändigen<br />
Verkauf verwertet und der Erlös abzüglich<br />
entstandener Kosten auf unsere Forderungen<br />
gegen den Kunden angerechnet.<br />
2.5 Erfolgt bei Zahlungsverzug des Kunden auch nach<br />
Ablauf einer von uns gesetzten Nachfrist nicht der<br />
volle Ausgleich unserer Ansprüche, sind wir neben<br />
unseren sonstigen Rechten befugt, als pauschalierten<br />
Schadenersatz statt der Leistung 20 % der<br />
Auftragssumme zu verlangen. Der Nachweis eines<br />
höheren Schaden bleibt uns vorbehalten. Dem<br />
Kunden wird der Nachweis gestattet, dass uns<br />
kein oder ein wesentlich geringerer Schaden als<br />
die Pauschale entstanden ist.<br />
2.6 Ein Zurückbehaltungsrecht und eine Aufrechnungsbefugnis<br />
stehen dem Kunden nur zu, sofern<br />
die Gegenansprüche unbestritten oder rechtskräftig<br />
festgestellt sind.<br />
2.7 Wechsel und Schecks werden von uns nur aufgrund<br />
schriftlicher Vereinbarung und nur zahlungshalber<br />
hereingenommen. Diskontspesen<br />
und alle sonstigen mit der Hereinnahme oder<br />
Einlösung des Wechsels bzw. Schecks entstehenden<br />
Kosten trägt der Kunde.<br />
3. Lieferzeit<br />
3.1 Vereinbarte Liefertermine und Lieferzeiten sind<br />
als annähernd zu betrachten und gelten nur bei<br />
rechtzeitiger Klarstellung aller Einzelheiten des<br />
Auftrages und rechtzeitiger Erfüllung aller<br />
Verpflichtungen des Kunden. Sie beziehen sich auf<br />
den Zeitpunkt der Absendung der Ware ab Lieferwerk<br />
und gelten mit Meldung der Versandbereitschaft<br />
als eingehalten, wenn die Ware ohne unser<br />
Verschulden nicht rechtzeitig abgesandt werden<br />
kann.<br />
3.2 Sollten wir an der rechtzeitigen Erfüllung unserer<br />
Pflichten aus von uns nicht zu vertretenden Gründen<br />
gehindert werden, verlängert sich die Lieferzeit<br />
um die Dauer der Behinderung sowie eine<br />
angemessene Anlaufzeit. Als nicht von uns zu vertretende<br />
Ereignisse im vorstehenden Sinn gelten<br />
neben Fällen höherer Gewalt insbesondere Streiks<br />
und Aussperrungen sowie die von uns nicht verschuldete<br />
nicht ordnungsgemäße Belieferung<br />
durch unsere Lieferanten. In diesen Fällen können<br />
wir hinsichtlich des noch nicht erfüllten Teils ganz<br />
oder teilweise vom Vertrag zurücktreten. Der<br />
Kunde ist in diesen Fällen nach fruchtlosem<br />
Ablauf einer schriftlich gesetzten angemessenen<br />
Nachfrist unter den gesetzlichen Voraussetzungen<br />
zum Rücktritt berechtigt, wenn ihm die<br />
Abnahme der Ware wegen der Verzögerung unzumutbar<br />
ist.<br />
3.3 Kommen wir in Verzug, kann der Kunde nach<br />
fruchtlosem Ablauf einer von ihm schriftlich<br />
gesetzten angemessenen Nachfrist vom Vertrag<br />
zurücktreten.<br />
4. Lieferung, Versand, Gefahrübergang<br />
4.1 Wir sind zu Teillieferungen sowie in zumutbarem<br />
Umfang zu fertigungsbedingten Mehr- oder<br />
Minderlieferungen berechtigt.<br />
4.2 Zum vereinbarten Termin versandbereit gemeldte<br />
Ware ist vom Kunden so<strong>for</strong>t abzurufen. Andernfalls<br />
sind wir berechtigt, die Ware auf Kosten und<br />
even in so far as they are already been processed –<br />
and revoke the direct debit authorisation in accordance<br />
with point 5.7 and demand that the Buyer<br />
return the goods at the Buyer’s expense, without<br />
the Buyer being entitled to right of retention or<br />
any other such right. Returned goods will be realized<br />
by us through private sale and the proceeds,<br />
minus any costs arising from our demands, credited<br />
to the Buyer.<br />
2.5 Should the Buyer who is in default of payment<br />
not have paid our demands in full, even after expiry<br />
of a period of grace determined by us, we have<br />
the authority, besides our other rights, to demand<br />
a flat-rate sum of damages amounting to 20% of<br />
the sum of the contract in lieu of payment. We<br />
reserve the right to prove higher damages. The<br />
Buyer is entitled to prove that no damage or a<br />
much lower level of damage than the flat rate has<br />
arisen.<br />
2.6 The Buyer is only entitled to right of retention and<br />
to the right to set off a claim against another<br />
claim insofar as the counter-claims are undisputed<br />
or have been determined as being legally binding.<br />
2.7 Bills of exchange and cheques are only accepted<br />
by us on the basis of a written agreement and <strong>for</strong><br />
payment purposes. Discount charges and all other<br />
costs arising from the acceptance or redemption<br />
of any bills of exchange or cheques are borne by<br />
the Buyer.<br />
3. Delivery Time<br />
3.1 Agreed delivery dates and periods are to be regarded<br />
as approximate and are valid only if all the<br />
details of the contract are clarified in good time<br />
and the Buyer has fulfilled all his obligations in<br />
good time. Such dates refer to the point of time at<br />
which the goods are dispatched from the place of<br />
supply of goods and are considered to be kept if<br />
the goods cannot be dispatched on time through<br />
no fault of ours.<br />
3.2 Should we be prevented in fulfilling our duties on<br />
time due to reasons beyond our control, the delivery<br />
period will be extended by the length of the<br />
delay as well as by an appropriate starting time.<br />
Examples of events beyond our control as mentioned<br />
above are acts of God especially strikes and<br />
lock-outs as well as deliveries by our distributors<br />
not in line with the regulations and beyond our<br />
control. In such cases we may, with regard to the<br />
uncompleted part of the contract, withdraw either<br />
in full or in part from the contract. In such<br />
cases the Buyer is legally entitled to withdraw<br />
from the contract if an extended period of time<br />
which has been agreed to in writing has come to<br />
an unfruitful end and if the acceptance of the<br />
goods is unreasonable due to the delay.<br />
3.3 If we experience delays, the Buyer is entitled to<br />
withdraw from the contract after the fruitless<br />
elapse of an appropriate period of grace as determined<br />
by him in writing.<br />
4. Delivery, Dispatch, Transer of Risk<br />
4.1 We are entitled to make part deliveries as well as<br />
excess deliveries or short deliveries to a reasonable<br />
extent, depending on production.<br />
4.2 The Buyer must immediately request delivery of<br />
goods which have been reported as ready <strong>for</strong><br />
shipment on the agreed date. If not, we are entitled<br />
to store the goods at the expense and risk of<br />
the Buyer as we see fit and to charge as delivered<br />
ex works or warehouse. The same applies if shipment<br />
cannot take place due to transportation<br />
problems or other causes beyond our control or if<br />
we store the goods at the Buyer’s request.<br />
4.3 The shipment of goods is at the Buyer’s expense.<br />
The choice of shipping route, <strong>for</strong>warding agent<br />
and carrier, means of conveyance and protection<br />
as well as the packaging of the goods is left to us.<br />
We do not guarantee to choose the cheapest or<br />
l’honorabilité du client, nous sommes en droit de<br />
rendre exigibles l’ensemble de nos créances et/ou<br />
d’exiger des garanties, indépendamment de la<br />
durée d’échéance d’éventuels effets. En outre,<br />
nous sommes en droit de n’effectuer toutes livraisons<br />
en cours que sur paiement d’avance ou sur<br />
présentation de garanties. Si le client refuse les<br />
paiements d’avance ou l’apport de garanties, nous<br />
sommes en droit de résilier le contrat et de réclamer<br />
des dommages et intérêts. De plus, nous pouvons,<br />
sans nous rétracter, interdire l’utilisation et<br />
la vente des marchandises livrées par nous –<br />
même si la marchandise a déjà été utilisée –, révoquer<br />
le mandat d’encaissement conf. paragraphe<br />
5.7 et exiger la restitution de la marchandise aux<br />
frais du client, sans que le client ait un droit de<br />
rétention ou droit autre. Les marchandises reprises<br />
sont mises à profit par nos soins par vente de<br />
gré à gré, et les recettes sont décomptées avec<br />
nos créances à l’égard du client, après soustraction<br />
des frais engagés.<br />
2.5 Si, en cas de retard de paiement de la part du<br />
client, nos créances ne sont pas compensées complètement<br />
au bout d’un délai supplémentaire fixé<br />
par nous, nous sommes en droit, outre nos autres<br />
droits, d’exiger à titre de <strong>for</strong>fait de dommages et<br />
intérêts, en remplacement du paiement, 20 % de<br />
la somme de la commande. Nous nous réservons<br />
la possibilité d’apporter la preuve d’un dommage<br />
plus important. Le client a la possibilité d’apporter<br />
la preuve que nous n’avons pas subi de dommage<br />
ou que nous avons subi un dommage sensiblement<br />
inférieur au <strong>for</strong>fait.<br />
2.6 Le client n’a droit de rétention et de compensation<br />
que si les prétentions contraires sont incontestées<br />
ou constatées par jugement.<br />
2.7 Nous n’acceptons tous effets et chèques qu’après<br />
accord écrit et à titre de paiement. Les frais d’escompte<br />
et tous autres frais relevant de l’acceptation<br />
ou de l’encaissement d’un effet ou d’un chèque<br />
sont à la charge du client.<br />
3. Délais de livraison<br />
3.1 Les dates et délais de livraison convenus doivent<br />
être considérés comme approximatifs et ne sont<br />
valables que si tous les détails de la commande<br />
peuvent être clarifiés à temps et si le client satisfait<br />
à temps à tous ses engagements. Ils se rapportent<br />
au moment de l’expédition de la marchandise<br />
départ usine de livraison et sont considérés<br />
comme ayant été respectés au moment de<br />
la déclaration indiquant que la marchandise est<br />
prête à être expédiée si la marchandise ne peut<br />
être expédiée à temps pour des raisons ne relevant<br />
pas de notre responsabilité.<br />
3.2 Si des raisons ne relevant pas de notre responsabilité<br />
venaient nous empêcher de remplir nos obligations<br />
à temps, le délai de livraison se prolonge<br />
de la durée de l’empêchement et d’une période de<br />
départ supplémentaire raisonnable. Font partie<br />
des événements ne relevant pas de notre responsabilité<br />
au sens exprimé ci-dessus, outre les cas de<br />
<strong>for</strong>ce majeure, en particulier les grèves et lockouts<br />
ainsi que la non livraison ou livraison incorrecte<br />
de la part de nos fournisseurs ne relevant<br />
pas de notre responsabilité. Dans tous ces cas,<br />
nous pouvons nous rétracter du contrat complètement<br />
ou partiellement pour la partie non réalisée.<br />
Dans ce cas, le client est en droit, après nous avoir<br />
fixé par écrit un délai supplémentaire raisonnable<br />
et si celui-ci s’est écoulé sans résultat, de se<br />
rétracter du contrat dans le cadre des conditions<br />
légales si, de par le retard, on ne peut exiger de lui<br />
qu’il prenne la marchandise.<br />
3.3 En cas de retard de notre part, le client est en<br />
droit, après nous avoir fixé par écrit un délai supplémentaire<br />
raisonnable et si celui-ci s’est écoulé<br />
sans résultat, de se rétracter du contrat.<br />
4. Livraison, expédition, transfert des risques<br />
4.1 Nous sommes en droit de procéder à des livrasons<br />
partielles et, dans la mesure où ceci ne peut être<br />
considéré comme intolérable pour le client, à des<br />
i22
Allgemeine In<strong>for</strong>mationen<br />
General in<strong>for</strong>mations<br />
In<strong>for</strong>mations générales<br />
Allgemeine Geschäftsbedingungen<br />
General Conditions of Sale<br />
Conditions générales de vente<br />
Gefahr des Kunden nach eigenem Ermessen zu<br />
lagern und als ab Werk oder Lager geliefert zu<br />
berechnen. Gleiches gilt, wenn der Versand verkehrsbedingt<br />
oder aus sonstigen von uns nicht zu<br />
vertretenden Umständen nicht erfolgen kann<br />
oder wenn wir die Ware auf Wunsch des Kunden<br />
einlagern.<br />
4.3 Der Versand der Ware erfolgt auf Rechnung des<br />
Kunden. Der Versandweg, der Spediteur und<br />
Frachtführer, Beförderungs- und Schutzmittel<br />
sowie die Verpackung der Ware sind unserer Wahl<br />
überlassen. Wir übernehmen keine Gewähr <strong>für</strong> die<br />
billigste oder schnellste Versandart.<br />
Transportversicherungen werden von uns nur auf<br />
ausdrücklichen Wunsch und auf Kosten des<br />
Kunden abgeschlossen.<br />
4.4 Mit der Übergabe der Ware an den Spediteur oder<br />
Frachtführer, spätestens jedoch mit dem Verlassen<br />
des Werks oder des Lagers, geht die Gefahr auf<br />
den Kunden über. Wird versandbereit gemeldete<br />
Ware vom Kunden nicht so<strong>for</strong>t abgerufen, geht<br />
die Gefahr mit der Meldung der Versandbereitschaft<br />
auf den Kunden über.<br />
4.5 Eine Abnahme der Ware kann nur aufgrund ausdrücklicher<br />
schriftlicher Vereinbarung und nur im<br />
Lieferwerk erfolgen. Die Abnahme muss so<strong>for</strong>t<br />
nach Meldung der Versandbereitschaft durchgeführt<br />
werden. Alle Abnahmekosten trägt der<br />
Kunde. Erfolgt eine Abnahme ohne unser Verschulden<br />
nicht, nicht rechtzeitig oder nicht vollständig,<br />
so sind wir berechtigt, die Ware ohne<br />
Abnahme zu versenden oder auf Kosten und<br />
Gefahr des Kunden zu lagern. Die Ware gilt in<br />
diesem Fall mit Absendung oder Einlagerung als<br />
in jeder Beziehung vertragsgemäß geliefert.<br />
4.6 Für die Auslegung der Handelsklauseln gelten die<br />
Incoterms 2000.<br />
5. Eigentumsvorbehalt<br />
5.1 Die gelieferte Ware bleibt unser Eigentum (Vorbehaltsware)<br />
bis zur Erfüllung aller - auch künftiger -<br />
Forderungen, insbesondere auch der jeweiligen<br />
Salden<strong>for</strong>derungen, die uns im Rahmen der Geschäftsbeziehung<br />
gegen den Kunden gleich aus<br />
welchem Rechtsgrund zustehen. Sofern wir zur<br />
Finanzierung oder Refinanzierung des Kaufpreises<br />
gegenüber dem Kunden oder Dritten Verpflichtungen<br />
eingehen oder solche Verpflichtungen<br />
entstehen, etwa aufgrund Wechselakzepts, Bürgschafts-<br />
oder sonstiger mittelbarer oder unmittelbarer<br />
Haftungsübernahme durch uns, geht das<br />
Eigentum erst auf den Kunden über, wenn wir<br />
insoweit von jeglicher Haftung gegenüber dem<br />
Kunden oder Dritten frei werden.<br />
5.2 Be- und Verarbeitung der Vorbehaltsware erfolgen<br />
<strong>für</strong> uns als Hersteller im Sinne des § 950 BGB,<br />
ohne uns zu verpflichten. Die be- und verarbeitete<br />
Ware gilt als Vorbehaltsware im Sinne der Ziffer<br />
5.1. Bei der Verarbeitung, Verbindung und Vermischung<br />
der Vorbehaltsware mit anderen Waren<br />
durch den Kunden steht uns das Miteigentum an<br />
der neuen Sache zu im Verhältnis des Rechnungswertes<br />
der Vorbehaltsware zum Rechnungswert<br />
der anderen verwendeten Waren. Erlischt unser<br />
Eigentum durch Be- oder Verarbeitung, Verbindung<br />
oder Vermischung, so überträgt der Kunde<br />
uns bereits jetzt die ihm zustehenden Eigentumsrechte<br />
am neuen Bestand oder der neuen<br />
Sache im Umfang des Rechnungswertes der Vorbehaltsware.<br />
Unsere Miteigentumsrechte gelten<br />
als Vorbehaltsware im Sinne der Ziffer 5.1.<br />
5.3 Der Kunde hat die Vorbehaltsware <strong>für</strong> uns unentgeltlich<br />
und mit der Sorgfalt eines ordentlichen<br />
Kaufmanns zu verwahren und auf eigene Kosten<br />
gegen Feuer-, Wasser- und Diebstahlschäden zum<br />
Rechnungswert zu versichern. Auf unser jederzeit<br />
mögliches Verlangen hat der Kunde die Vorbehaltsware<br />
besonders zu lagern und zu kennzeichnen.<br />
Der Kunde ist verpflichtet, uns jederzeit über<br />
den noch in seinem Besitz befindlichen Bestand<br />
der Vorbehaltsware, den Ort ihrer Aufbewahrung<br />
und ggf. ihren Be- oder Verarbeitungszustand<br />
Auskunft zu erteilen. Wir sind berechtigt, die<br />
Vorbehaltsware jederzeit zu besichtigen.<br />
i23<br />
fastest shipping route. Transportation insurance is<br />
only taken out at the express wish of the Buyer<br />
and at the Buyer’s expense.<br />
4.4 The risk is transferred to the Buyer when the<br />
goods are handed over to the <strong>for</strong>warding agent or<br />
freight carrier, at the latest, however, when the<br />
goods leave the works or the warehouse. If the<br />
Buyer does not immediately call <strong>for</strong> the delivery of<br />
goods which have been reported as ready <strong>for</strong><br />
shipment, the risk is transferred to the Buyer from<br />
the time that the goods were reported as being<br />
ready <strong>for</strong> shipment.<br />
4.5 Acceptance of the goods can take place only on<br />
the basis of an express written agreement and<br />
only in the place of supply of goods. Acceptance<br />
must take place immediately after the goods have<br />
been reported as ready <strong>for</strong> dispatch. All costs relating<br />
to the acceptance of goods are borne by the<br />
Buyer. If the goods are not handed over through<br />
no fault of ours, or if the goods are handed over<br />
late or not in full, then we are entitled to dispatch<br />
the goods without acceptance or to store them at<br />
the expense and risk of the Buyer. In such a case,<br />
with either the dispatch or the warehousing of<br />
the goods, the goods are regarded as having been<br />
delivered according to contract in every respect.<br />
4.6 Incoterms 2000 should be used to interpret these<br />
commercial terms.<br />
5. Retention of Title<br />
5.1 The delivered goods remain our property (goods<br />
under reservation of proprietary rights) pending<br />
fulfilment of all – including future – demands,<br />
especially the payment of balances which are still<br />
due to us within the framework of the relationship<br />
with the Buyer <strong>for</strong> no matter what legal<br />
grounds. If we incur liabilities with respect to the<br />
Buyer or a third party due to the financing or refinancing<br />
of the purchase price or if such debts<br />
arise due to the acceptance of a bill of exchange,<br />
security or other direct or indirect assumption of<br />
liability by us, then the property is only transferred<br />
to the Buyer when we become free of any liability<br />
with regard to the Buyer or third party.<br />
5.2 The handling and processing of the goods under<br />
reservation of proprietary rights take place <strong>for</strong> us,<br />
as the manufacture, according to § 950 of the BGB<br />
(the German Civil Code) without any commitment<br />
to ourselves. The processed goods are regarded as<br />
goods under reservation of proprietary rights in<br />
the spirit of point 5.1. If the Buyer processes,<br />
assembles or mixes such goods with other goods,<br />
we are entitled to joint ownership of the new<br />
item in a ratio of the value of the invoiced goods<br />
under reservation of the proprietary rights to the<br />
value of the invoice of the other goods used. If our<br />
ownership expires due to processing, assembly or<br />
mixing, the Buyer has to transfer to us, straight<br />
away, the property rights he is entitled to with<br />
regard to the new stock or new item to the extent<br />
of the value of the invoice of the goods under<br />
reservation of proprietary rights. Our rights to<br />
joint ownership are regarded as goods under<br />
reservation of proprietary rights in the spirit of<br />
point 5.1.<br />
5.3 The Buyer must keep the goods under reservation<br />
of proprietary rights free of charge <strong>for</strong> us and with<br />
the due care of good business practices and must<br />
insure the goods at his own expense against fire,<br />
theft and damage by water. Whenever we<br />
request, the Buyer must store and mark such<br />
goods in a particular way. The Buyer is obliged to<br />
give us in<strong>for</strong>mation at any time regarding the<br />
stock of such a<strong>for</strong>ementioned goods still in his<br />
possession, the place where they are stored and, if<br />
necessary, their condition of processing. We reserve<br />
the right to inspect such goods at any time.<br />
5.4 The Buyer may only sell the goods on as per usual<br />
business practices under his normal business conditions<br />
and as long as he is not in arrears with his<br />
payments or other contractual obligations, provided<br />
that he agrees a conditional sale with his purchaser<br />
and that the demands arising from the<br />
resale pass to us according to points 5.5 and 5.6.<br />
livraisons de quantités supplémentaires ou inférieures<br />
en fonction des processus de fabrication.<br />
4.2 Le client doit faire prélever immédiatement la<br />
marchandise prête à l’expédition à la date convenue.<br />
Dans le cas contraire, nous sommes en droit<br />
de stocker la marchandise discrétionnairement<br />
aux frais et risques du client et de la facturer<br />
comme livrée départ usine ou stock. Il en est de<br />
même si l’expédition ne peut avoir lieu pour des<br />
raisons relevant des moyens de transport ou d’autres<br />
raisons ne relevant pas de notre responsabilité<br />
ou si nous stockons la marchandise à la demande<br />
du client.<br />
4.3 L’expédition de la marchandise a lieu aux frais du<br />
client. La voie de transport, le transporteur et<br />
commissionnaire de transport, les moyens de<br />
transport et de protection ainsi que l’emballage<br />
sont laissés à notre discrétion. Nous n’assumons<br />
aucune garantie pour le mode d’expédition le plus<br />
économique ou le plus rapide. Nous ne contractons<br />
une assurance de transport qu’à la<br />
demande expresse et aux frais du client.<br />
4.4 Le transfert des risques au client a lieu au moment<br />
de la remise au transporteur ou commissionnaire<br />
de transport, au plus tard cependant lorsque la<br />
marchandise quitte l’usine ou le stock. Si de la<br />
marchandise déclarée prête à l’expédition n’est<br />
pas enlevée immédiatement, le transfert de risques<br />
au client a lieu au moment de la déclaration<br />
correspondante.<br />
4.5 Une procédure de réception de la marchandise ne<br />
peut avoir lieu que sur accord écrit express et uniquement<br />
à l’usine du fournisseur. La réception<br />
doit avoir lieu immédiatement après la déclaration<br />
indiquant que la marchandise est prête à être<br />
expédiée. L’ensemble des frais de réception sont à<br />
la charge du client. Si, pour des raisons ne relevant<br />
pas de notre responsabilité, la réception n’a pas<br />
lieu, n’a pas lieu à temps ou n’a pas lieu complètement,<br />
nous sommes en droit d’expédier la marchandise<br />
sans réception ou de la stocker aux frais<br />
et risques du client. Dans ce cas, la marchandise<br />
est considérée comme ayant été livrée con<strong>for</strong>mément<br />
au contrat à tous égard lors de l’expédition<br />
ou de la mise en stock.<br />
4.6 Sont valables pour l’interprétation des clauses<br />
commerciales les règles internationales d’interprétation<br />
des termes employés dans le commerce<br />
international 2000.<br />
5. Réserves de propriété<br />
5.1 La marchandise livrée reste notre propriété (marchandise<br />
sous réserve de propriété) jusqu’à paiement<br />
de toutes les créances – également des créances<br />
futures –, en particulier des créances de soldes<br />
auxquelles nous avons droit vis-à-vis du client<br />
dans le cadre de nos relations commerciales, pour<br />
quelques raisons juridiques que ce soit. Dans la<br />
mesure où nous contractons des engagements<br />
vis-à-vis du client ou de tiers pour le financement<br />
ou refinancement du prix de vente ou si de tels<br />
engagements venaient à être donnés, par exemple<br />
en raison de l’acceptation d’effets, d’engagement<br />
par caution ou prise en charge de responsabilité<br />
directe ou indirecte de notre part, le transfert<br />
de propriété au client n’a lieu que lorsque<br />
nous nous sommes libérés de toute responsabilité<br />
vis-à-vis du client ou de tiers.<br />
5.2 L’utilisation, l’usinage et la trans<strong>for</strong>mation de la<br />
marchandise sous réserve de propriété a lieu pour<br />
nous en tant que fabricant au sens du § 950 BGB<br />
[Code civil allemand], sans nous engager pour<br />
autant. Les marchandises utilisées, usinées et<br />
trans<strong>for</strong>mées sont considérées comme des marchandises<br />
sous réserve de propriété au sens du<br />
paragraphe 5.1. En cas de trans<strong>for</strong>mation, de relation<br />
et de mélange de la marchandise sous réserve<br />
de propriété avec d’autres marchandises par le<br />
client, nous avons copropriété à la chose nouvelle<br />
à concurrence de la valeur de facturation de la<br />
marchandise sous réserve de propriété par rapport<br />
à la valeur de facturation des autres marchandises<br />
utilisées. Si notre propriété prend fin de<br />
par l’utilisation, l’usinage ou la trans<strong>for</strong>mation,
Allgemeine In<strong>for</strong>mationen<br />
General in<strong>for</strong>mations<br />
In<strong>for</strong>mations générales<br />
Allgemeine Geschäftsbedingungen<br />
General Conditions of Sale<br />
Conditions générales de vente<br />
5.4 Der Kunde darf die Vorbehaltsware nur im<br />
gewöhnlichen Geschäftsverkehr, zu seinen normalen<br />
Geschäftsbedingungen und solange er mit seinen<br />
Zahlungs- oder sonstigen Vertragspflichten<br />
nicht in Verzug ist, weiterveräußern, vorausgesetzt,<br />
dass er mit seinem Abnehmer einen Eigentumsvorbehalt<br />
vereinbart und die Forderungen<br />
aus der Weiterveräußerung nach den Ziffern 5.5<br />
und 5.6 auf uns übergehen. Zu anderen Verfügungen<br />
über die Vorbehaltsware ist der Kunde nicht<br />
berechtigt. Als Weiterveräußerung gilt auch die<br />
Verwendung der Vorbehaltsware zur Erfüllung<br />
von Werk- und Werklieferungsverträgen.<br />
5.5 Die Forderungen des Kunden aus der Weiterveräußerung<br />
der Ware werden bereits jetzt an uns<br />
abgetreten; dies gilt bei Einstellung der Weiterveräußerungs<strong>for</strong>derungen<br />
in ein Kontokorrent in<br />
deren Höhe auch <strong>für</strong> die jeweiligen Saldo<strong>for</strong>derungen.<br />
Die abgetretenen Forderungen dienen in<br />
demselben Umfang zur Sicherung wie die Vorbehaltsware.<br />
5.6 Veräußert der Kunde Vorbehaltsware zusammen<br />
mit anderen Waren, so werden uns die Forderungen<br />
aus der Weiterveräußerung bzw. die jeweiligen<br />
Saldo<strong>for</strong>derungen im Verhältnis des Rechnungswertes<br />
der Vorbehaltsware zum Rechnungswert<br />
der anderen Waren abgetreten. Bei der<br />
Weiterveräußerung von Waren, an denen wir<br />
Miteigentumsanteile gemäß Ziffer 5.2 haben,<br />
wird uns ein unserem Miteigentumsanteil entsprechender<br />
Teil der Forderung abgetreten.<br />
5.7 Der Kunde ist berechtigt, Forderungen aus der<br />
Weiterveräußerung oder Saldo<strong>for</strong>derungen einzuziehen,<br />
es sei denn, wir widerrufen die Einziehungsermächtigung<br />
in den in Ziffer 2.4 genannten Fällen.<br />
Auf unser Verlangen ist der Kunde verpflichtet,<br />
seine Abnehmer so<strong>for</strong>t von der Abtretung an uns<br />
zu unterrichten und uns die zur Einziehung er<strong>for</strong>derlichen<br />
Auskünfte und Unterlagen zu geben.<br />
5.8 Zur anderweitigen Abtretung der Forderungen ist<br />
der Kunde nicht berechtigt. Dies gilt auch <strong>für</strong><br />
Factoring-Geschäfte; diese sind dem Kunden auch<br />
nicht aufgrund der Einziehungsermächtigung<br />
gestattet. Wir sind jedoch bereit, Factoring-<br />
Geschäften im Einzelfall zuzustimmen, sofern der<br />
Gegenwert hieraus dem Kunden endgültig zufließt<br />
und die Befriedigung unserer Forderungen<br />
nicht gefährdet ist.<br />
5.9 In den in Ziffer 2.4 genannten Fällen sind wir auch<br />
berechtigt, die Be- und Verarbeitung sowie die<br />
Weiterveräußerung der Vorbehaltsware zu untersagen.<br />
In diesen Fällen sowie bei Verstoß des Kunden<br />
gegen die Verpflichtungen nach Ziffer 5.4 können<br />
wir auch die Rückgabe der Vorbehaltsware auf<br />
Kosten des Kunden unter Ausschluss eines Zurückbehaltungsrechts<br />
verlangen. Der Kunde ermächtigt<br />
uns schon jetzt, seinen Betrieb zu betreten und die<br />
Vorbehaltsware zurückzunehmen. Die Rücknahme<br />
gilt nicht als Rücktritt vom Vertrag.<br />
5.10 Von Pfändungen und sonstigen Beeinträchtigungen<br />
der Vorbehaltsware und der abgetretenen<br />
Forderungen hat uns der Kunde unverzüglich zu<br />
in<strong>for</strong>mieren. Sofern uns durch die Abwehr solcher<br />
Pfändungen oder sonstigen Beeinträchtigungen<br />
gerichtliche oder außergerichtliche Kosten entstehen,<br />
die wir von Dritten nicht erstattet bekommen,<br />
weil diese hierzu wirtschaftlich nicht in der<br />
Lage sind, haftet uns der Kunde <strong>für</strong> den entstandenen<br />
Ausfall.<br />
5.11 Übersteigt der Wert der bestehenden Sicherheiten<br />
die gesicherten Forderungen insgesamt um<br />
mehr als 10 %, sind wir auf Verlangen des Kunden<br />
insoweit zur Freigabe von Sicherheiten nach unserer<br />
Wahl verpflichtet.<br />
6. Gewährleistung<br />
6.1 Für die Lieferung gebrauchter Ware sind Gewährleistungsansprüche<br />
ausgeschlossen.<br />
Gewährleistungsansprüche infolge der Lieferung<br />
mangelhafter neuer Ware bestimmen sich nach<br />
den Ziffern 6.2 bis 6.8.<br />
The Buyer is not entitled to other rights of disposal<br />
with regard to the goods under reservation of<br />
proprietary rights. The use of the goods under<br />
reservation of proprietary rights in order to fulfil<br />
works and delivery contracts are also regarded as<br />
resales.<br />
The claims of the Buyer arising from the resale of<br />
the goods pass on to us here and now; this<br />
applies when the resale demands are transferred<br />
to a current account to that amount as well as <strong>for</strong><br />
the outstanding balances. Assigned claims serve<br />
as a security to the same extent as the goods<br />
under reservation of proprietary rights.<br />
5.6 If the Buyer sells the goods under reservation of<br />
proprietary rights together with other goods, then<br />
the claims arising from the resale or the respective<br />
balance of payment demands are passed on to<br />
us in the ratio of the invoice value of the goods<br />
under reserve to the invoice value of the other<br />
goods. Should goods to which we have joint<br />
ownership in line with point 5.2 be resold, a portion<br />
of the claim will be assigned to us in proportion<br />
to our share of the joint ownership.<br />
5.7 The Buyer is entitled to collect the demands arising<br />
from the resale or balance of payment<br />
demands unless we revoke the right of direct<br />
debit authorization as in the cases outlined in<br />
point 2.4. At our wish, the Buyer is obliged to<br />
in<strong>for</strong>m his purchaser of the transfer to us and to<br />
furnish us with the in<strong>for</strong>mation and documentation<br />
necessary <strong>for</strong> the direct debit transaction.<br />
5.8 The Buyer is not entitled to transfer claims elsewhere.<br />
This also applies to factoring contracts; the<br />
Buyer is also not allowed to use factoring due to<br />
the direct debit authorization. We are, however,<br />
prepared to agree to factoring in exceptional<br />
cases, if the equivalent definitely goes to the<br />
Buyer and the fulfilment of our demands is not<br />
put at risk.<br />
5.9 With regard to the cases outlined in point 2.4, we<br />
are also entitled to <strong>for</strong>bid the handling, processing<br />
as well as resale of the goods under reservation<br />
of proprietary rights. In such cases, as well as<br />
in the case of the Buyer violating his obligations<br />
under point 5.4, we can also demand the return of<br />
the goods under reservation of proprietary rights<br />
at the Buyer’s expense and without the Buyer’s<br />
right of retention. The Buyer authorises us here<br />
and now to enter his premises and to take back<br />
the goods under reservation of proprietary rights.<br />
The retrieval of goods is not to be regarded as a<br />
withdrawal from the contract.<br />
5.10 The Buyer must in<strong>for</strong>m us immediately if the<br />
goods under reservation of proprietary rights or<br />
the assigned claims are seized or interfered with<br />
in any other way. If our defence of such seizures or<br />
any other interferences should incur any costs due<br />
to judicial or out-of-court settlements and should<br />
these costs not be reimbursed to us by a third<br />
party because the third party is not financially<br />
able to do so, then the Buyer is liable to pay us <strong>for</strong><br />
any losses incurred.<br />
5.11 If the value of the existing securities exceeds the<br />
secured demands by more than 10%, then we are,<br />
at the request of the Buyer, obliged to release<br />
securities according to our choice.<br />
6. Warranty<br />
6.1 We cannot offer any warranty claims <strong>for</strong> the delivery<br />
of used goods. Warranty claims as a result of<br />
the delivery of faulty new goods are determined<br />
in points 6.2 to 6.8.<br />
6.2 We must be in<strong>for</strong>med of any defects or faults<br />
immediately and in writing. If the goods were<br />
accepted by the Buyer in line with point 4.5 or if<br />
the goods are regarded as having been accepted,<br />
then the complaint of such defects or faults is no<br />
longer possible, if it were possible that the faults<br />
could have been ascertained at the time the<br />
goods were accepted. Moreover, any complaints<br />
regarding faults which may be recognised as such<br />
upon careful examination (obvious faults) may<br />
la relation ou le mélange de la marchandise, le<br />
client nous cède dès aujourd’hui les droits de propriété<br />
qu’il détient sur le produit nouveau ou la<br />
chose nouvelle à concurrence de la valeur de<br />
facturation de la marchandise sous réserve de<br />
propriété. Nos droits de copropriété sont considérés<br />
comme marchandise sous réserve de propriété<br />
au sens du paragraphe 5.1.<br />
5.3 Le client est tenu de conserver la marchandise<br />
sous réserve de propriété pour nous gratuitement<br />
et avec le soin d’un commerçant ordinaire et de<br />
les assurer à ses frais contre l’incendie, les dégâts<br />
des eaux et le vol, à la valeur de facturation. A<br />
notre demande, que nous pourrons exprimer à<br />
tout moment, le client est tenu de stocker et de<br />
marquer spécialement la marchandise sous réserve<br />
de propriété. Le client est tenu de nous in<strong>for</strong>mer<br />
à tout moment du stock de marchandise sous<br />
réserve de propriété se trouvant encore chez lui,<br />
du lieu où elle est conservée et le cas échéant de<br />
son état d’utilisation, d’usinage ou de trans<strong>for</strong>mation.<br />
Nous sommes en droit de contrôler à tout<br />
moment la marchandise sous réserve de propriété.<br />
5.4 Le client n’a le droit de revendre la marchandise<br />
sous réserve de propriété que dans le cadre des<br />
affaires commerciales habituelles, à ses conditions<br />
générales normales et tant qu’il n’est pas en<br />
retard de paiement et n’a pas manqué à ses<br />
autres obligations contractuelles, à condition qu’il<br />
convienne avec son client d’une réserve de propriété<br />
et que les créances résultant de la revente<br />
nous soient cédées conf. aux paragraphes 5.5 et<br />
5.6. Le client n’est pas en droit de disposer autrement<br />
de la marchandise sous réserve de propriété.<br />
Est considérée comme revente également l’utilisation<br />
de la marchandise sous réserve de propriété<br />
pour l’exécution de contrats d’entreprise et de<br />
contrats mixtes d’entreprise et de vente.<br />
5.5 Les créances du client résultant de la revente de la<br />
marchandise nous sont cédées d’ores et déjà; ceci<br />
est valable également, en cas d’incorporation des<br />
créances de la revente dans un compte courant<br />
réciproque, pour les créances de soldes à concurrence<br />
de leurs montants. Les créances cédées servent<br />
de garantie à concurrence des mêmes sommes,<br />
comme la marchandise sous réserve de propriété.<br />
5.6 Si le client revend la marchandise sous réserve de<br />
propriété avec d’autres marchandises, les créances<br />
résultant de cette revente ou les créances de soldes<br />
correspondantes nous sont cédées à concurrence<br />
de la valeur de facturation de la marchandise<br />
sous réserve de propriété par rapport à la<br />
valeur de facturation des autres marchandises. En<br />
cas de revente de marchandises auxquelles nous<br />
avons des parts de copropriété conf. au paragraphe<br />
5.2, nous est cédée une partie de la créance<br />
correspondant à notre part de copropriété.<br />
5.7 Le client est en droit d’encaisser les créances résultant<br />
de la revente ou des créances de solde, à<br />
moins que nous ne révoquions le mandat d’encaissement<br />
dans les cas mentionnés au paragraphe<br />
2.4. A notre demande, le client est tenu d’in<strong>for</strong>mer<br />
immédiatement ses clients de cette cession<br />
à notre profit et de nous donner toutes les<br />
in<strong>for</strong>mations et tous les documents nécessaires à<br />
l’encaissement.<br />
5.8 Le client n’a pas le droit de céder ces créances<br />
autrement. Ceci est également valable pour les<br />
contrats d’affacturage; le client n’y est pas autorisé<br />
non plus de par le mandat d’encaissement.<br />
Nous sommes cependant prêts à autoriser des<br />
contrats d’affacturage dans des cas isolés dans la<br />
mesure où la contre-valeur en résultant revient<br />
définitivement au client et où la satisfaction de<br />
nos créances ne s’en trouve pas remise en cause.<br />
5.9 Dans les cas mentionnés au paragraphe 2.4, nous<br />
sommes également en droit d’interdire l’utilisation,<br />
l’usinage et la trans<strong>for</strong>mation, ainsi que la<br />
revente de la marchandise sous réserve de propriété.<br />
Dans ces cas-là, ainsi qu’en cas d’infraction<br />
du client aux engagements du paragraphe 5.4,<br />
nous pouvons également exiger la restitution de<br />
la marchandise sous réserve de propriété au frais<br />
du client, à l’exclusion de tout droit de rétention.<br />
i24
Allgemeine In<strong>for</strong>mationen<br />
General in<strong>for</strong>mations<br />
In<strong>for</strong>mations générales<br />
Allgemeine Geschäftsbedingungen<br />
General Conditions of Sale<br />
Conditions générales de vente<br />
6.2 Mängel der Ware sind unverzüglich schriftlich zu<br />
rügen. Wurde die Ware vom Kunden gemäß Ziffer<br />
4.5 abgenommen oder gilt die Ware als abgenommen,<br />
ist die Rüge von solchen Mängeln ausgeschlossen,<br />
die bei der Abnahme hätten festgestellt<br />
werden können. Im übrigen ist die Rüge der<br />
bei sorgfältiger Prüfung erkennbaren (offenen)<br />
Mängel nach Ablauf von zwei Wochen ab Eingang<br />
der Ware am Bestimmungsort ausgeschlossen.<br />
6.3 Der Kunde hat die gerügte Ware ordnungsgemäß<br />
zu lagern und uns Gelegenheit zu geben, die Ware<br />
zu besichtigen. Be- und Verarbeitung sowie Veräußerung<br />
der gerügten Ware ist so<strong>for</strong>t einzustellen<br />
bzw. zu unterlassen. Ferner hat uns der Kunde<br />
auf unser jederzeit zulässiges Verlangen unverzüglich<br />
die gerügte Ware oder - nach unserer<br />
Wahl - Proben davon zur Verfügung zu stellen.<br />
Durch unberechtigte Rügen entstehende Kosten<br />
trägt der Kunde. Verletzt er die Verpflichtungen<br />
dieser Ziffer, entfallen sämtliche Gewährleistungsansprüche.<br />
6.4 Gewährleistungsansprüche können nur geltend<br />
gemacht werden, wenn und soweit die fehlerhafte<br />
Ware mehr als 5 % der Gesamtliefermenge<br />
beträgt. Mängel eines Teils der Lieferung können<br />
nicht zur Beanstandung der ganzen Lieferung<br />
führen.<br />
6.5 Soweit wir <strong>für</strong> mangelhafte Ware einzustehen<br />
haben, sind wir nach unserer Wahl zur Beseitigung<br />
des Mangels (Nachbesserung) oder Lieferung<br />
einer mangelfreien Sache (Ersatzlieferung)<br />
berechtigt. Eine Pflicht zur Nachbesserung bzw.<br />
Ersatzlieferung besteht nicht. Für Transportkosten<br />
haften wir nur insoweit, als sich diese nicht<br />
dadurch erhöht haben, dass die Ware an einen<br />
anderen Ort als den Erfüllungsort gebracht<br />
wurde.<br />
6.6 Der Kunde kann nach fruchtlosem Ablauf einer<br />
von ihm schriftlich gesetzten angemessenen<br />
Nachfrist hinsichtlich der mangelhaften Ware<br />
vom Vertrag zurücktreten oder Herabsetzung des<br />
Kaufpreises verlangen, wenn eine Nachbesserung<br />
bzw. Ersatzlieferung fehlschlägt. Die gleichen<br />
Rechte stehen dem Kunden auch ohne Fristsetzung<br />
dann zu, wenn Nachbesserung und Ersatzlieferung<br />
von uns ernsthaft und endgültig verweigert<br />
werden. Weitergehende Rechte aufgrund von<br />
Mängeln - insbesondere vertragliche oder außervertragliche<br />
Schadenersatzansprüche - sind in<br />
dem in Ziffer 7. bestimmten Umfang ausgeschlossen.<br />
6.7 Gewährleistungsansprüche verjähren 1 Jahr nach<br />
Ablieferung der Ware, spätestens 13 Monate nach<br />
Meldung der Versandbereitschaft durch uns.<br />
6.8 Dem Kunden stehen die gesetzlichen Gewährleistungsrechte<br />
unbeschränkt zu, wenn wir den<br />
Mangel arglistig verschwiegen haben.<br />
7. Haftung<br />
7.1 Für unmittelbare Schäden, entgangenen Gewinn,<br />
ausgebliebene Einsparungen, mittelbare und/oder<br />
Folgeschäden sowie Aufwendungen, die unseren<br />
Kunden oder Dritten im Zusammenhang mit der<br />
Anbahnung, Durchführung oder Beendigung<br />
eines Vertrages entstehen, haften wir vorbehaltlich<br />
der nachfolgenden Regelungen nur dann,<br />
wenn unsere gesetzlichen Vertreter oder leitenden<br />
Angestellten die Entstehung des Schaden /<br />
der Aufwendungen durch ein vorsätzliches oder<br />
grob fahrlässiges Fehlverhalten verursacht haben;<br />
bei grober Fahrlässigkeit einfacher Erfüllungsgehilfen<br />
haften wir nur bis zur Höhe der vorhersehbaren<br />
(typischerweise eintretenden) Schäden<br />
bzw. Aufwendungen. Ausgeschlossen ist unsere<br />
vertragliche, ausservertragliche und sonstige<br />
Haftung unabhängig vom Rechtsgrund des Ersatzanspruches<br />
(insbesondere auch wegen der<br />
Verletzung von Pflichten aus einem vertraglichen<br />
oder gesetzlichen Schuldverhältnis, wegen bei<br />
Vertragsschluss vorliegenden Leistungshindernissen<br />
und wegen unerlaubter Handlung), soweit<br />
unseren gesetzlichen Vertretern oder leitenden<br />
Angestellten kein Verschulden oder lediglich einfache<br />
Fahrlässigkeit vorgeworfen werden kann.<br />
i25<br />
not be made if a period of two weeks has elapsed<br />
since the goods were received at their destination.<br />
6.3 The Buyer is obliged to store the faulty goods in<br />
question in line with regulations and to allow us<br />
the opportunity to inspect the goods. The handling,<br />
processing and sale of the goods being complained<br />
about must be halted or is prohibited.<br />
Furthermore, the Buyer must make available to us<br />
the goods being complained about – or samples<br />
thereof should we choose – immediately and at<br />
any time we request the Buyer to do so. Any costs<br />
arising from unjustified complaints must be<br />
borne by the Buyer. If the Buyer violates this point,<br />
all warranty claims are null and void.<br />
6.4 Warranty claims can only be asserted if and insofar<br />
as the defective goods amount to more than<br />
5% of the total consignment. Defects in a part of<br />
the shipment cannot lead to a complaint regarding<br />
the entire shipment.<br />
6.5 Insofar as we are answerable <strong>for</strong> defective goods,<br />
we are entitled to either eliminate the defect<br />
(amendment) or deliver fault-free goods (replacement<br />
delivery), according to our choice. We are<br />
not obliged to amend faulty goods or to carry out<br />
replacement deliveries. We are only legally<br />
responsible <strong>for</strong> transportation costs insofar as<br />
they have not been increased due to the fact that<br />
the goods have been delivered to another place<br />
other than the place of destination.<br />
6.6 The Buyer can withdraw from the contract or<br />
demand a reduction in the purchase price after an<br />
appropriate period of grace fixed by him in writing<br />
has come to an end and the amendment of<br />
the goods or the replacement delivery has not<br />
resulted. The Buyer is entitled to the same rights<br />
even without the period of grace if we have insistently<br />
and conclusively refused amendments and<br />
replacement deliveries. Any other rights regarding<br />
defects – especially contractual or non-contractual<br />
claims <strong>for</strong> damages – are barred to the extent as<br />
outlined in point 7.1.<br />
6.7 Warranty claims become barred by the statute of<br />
limitations after one year following delivery of the<br />
goods, and at the latest 13 months after we have<br />
reported the goods as being ready <strong>for</strong> dispatch.<br />
6.8 The Buyer is entitled to unlimited legal warranty<br />
claims if we have maliciously concealed any<br />
defect.<br />
7. Legal Liability<br />
7.1 We are only legally liable <strong>for</strong> direct damages, loss<br />
of profit, savings which failed to materialise, indirect<br />
or consequential damages as well as expenditure<br />
which arose <strong>for</strong> our Buyer or a third party in<br />
connection with the initiation, implementation or<br />
ending of a contract, subject to the following<br />
rules and on condition that our legal representative<br />
or executive officer caused the damage or<br />
expenditure to arise as a result of wilful or grossly<br />
negligent misconduct. With regard to the gross<br />
negligence of non-managerial staff members, we<br />
are only legally liable to the extent of the amount<br />
of the <strong>for</strong>eseeable (typically occurring) damages<br />
or expenses. Our contractual, non-contractual and<br />
other liability is exempt from this, independent of<br />
the legal foundation of the claim to compensation<br />
(in particular even due to the violation of<br />
duties arising from a contractual or legal obligation,<br />
because of any hindrance with regard to<br />
goods or services present at the time the contract<br />
was concluded and because of torts), insofar as<br />
our legal representative or executive officer can<br />
not be blamed or can only be accused of slight<br />
negligence.<br />
7.2 The above limitations of liability do not apply to<br />
(i) personal injuries, (ii) <strong>for</strong> any manufacturer’s liability<br />
and (iii) negligent violation of important<br />
duties arising from the Buyer-Seller relationship<br />
insofar as the fulfilment of the contract is put at<br />
risk. In the case outlined in (iii), our liability is limited<br />
to the payment of compensation <strong>for</strong> <strong>for</strong>eseeable<br />
(typically occurring) damages.<br />
Le client nous autorise dès maintenant à pénétrer<br />
dans son entreprise et à reprendre la marchandise<br />
sous réserve de propriété. Cette reprise n’est pas<br />
considérée comme une rétractation du contrat.<br />
5.10 Le client est tenu de nous in<strong>for</strong>mer sans délai de<br />
toute saisie et autres atteintes portées à la marchandise<br />
sous réserve de propriété et aux créances<br />
cédées. Dans la mesure où nous engageons<br />
des frais judiciaires et extrajudiciaires dans le but<br />
de détourner ces saisies ou autres atteintes, et<br />
que ces frais ne nous sont pas remboursés par des<br />
tiers parce que leur situation économique ne le<br />
permet pas, le client assume la responsabilité des<br />
pertes subies.<br />
5.11 Si la valeur des garanties existantes dépasse en<br />
tout de plus de 10 % les créances garanties, nous<br />
sommes tenus, à la demande du client, de libérer,<br />
par suite, des garanties de notre choix.<br />
6. Garantie<br />
6.1 Tous droits de garantie sont exclus pour la livraison<br />
de marchandise d’occasion. Les droits de<br />
garantie pour livraison de marchandise neuve<br />
défectueuse sont régis par les paragraphes 6.2 à 6.8.<br />
6.2 Tous vices de marchandise doivent faire l’objet<br />
d’une réclamation écrite immédiate. Si la marchandise<br />
a fait l’objet d’une réception par le client<br />
conf. au paragraphe 4.5 ou si elle est considérée<br />
comme ayant fait l’objet d’une réception, les vices<br />
qui auraient pu être constatés lors de cette procédure<br />
de réception ne peuvent faire l’objet d’une<br />
telle réclamation. En outre, toute réclamation portant<br />
sur des vices pouvant être détectés lors d’un<br />
contrôle soigné (vices évidents) est exclue au bout<br />
de deux semaines après réception de la marchandise<br />
sur le lieu de destination.<br />
6.3 Le client doit stocker correctement la marchandise<br />
objet de la réclamation et nous donner l’occasion<br />
de la contrôler. Toute utilisation, tout usinage ou<br />
toute trans<strong>for</strong>mation et revente de la marchandise<br />
objet de la réclamation doit être interrompu(e)<br />
immédiatement et est interdit(e). En outre, le<br />
client est tenu de mettre immédiatement à notre<br />
disposition à tout moment, à notre demande, la<br />
marchandise objet de la réclamation ou – si nous<br />
le préférons – des échantillons de celle-ci. Les<br />
coûts causés par des réclamations non justifiées<br />
sont à la charge du client. Si le client fait infraction<br />
aux dispositions du présent paragraphe, tous<br />
droits de garantie deviennent caduques.<br />
6.4 Il n’est possible de faire valoir des droits de garantie<br />
que si la marchandise défectueuse constitue<br />
plus de 5 % de la fourniture totale. Des vices dans<br />
une partie de la livraison ne peuvent conduire à<br />
une réclamation portant sur la totalité de la livraison.<br />
6.5 Dans la mesure où nous devons répondre d’une<br />
marchandise défectueuse, nous sommes en droit<br />
de choisir entre une élimination des défauts (réparation<br />
des vices) ou une livraison de marchandise<br />
non défectueuse (livraison de remplacement).<br />
Il n’existe pas d’obligation de réparation des vices<br />
ou de livraison de remplacement. Nous n’assumons<br />
la responsabilité des frais de transport que<br />
dans la mesure où ceux-ci ne sont pas augmentés<br />
par le fait que la marchandise a été transportée<br />
dans un lieu autre que le lieu d’exécution.<br />
6.6 Le client est en droit, après nous avoir fixé par<br />
écrit un délai supplémentaire raisonnable pour la<br />
marchandise objet de la réclamation, et si celui-ci<br />
s’est écoulé sans résultat, de se rétracter du contrat<br />
ou d’exiger une baisse du prix d’achat si l’élimination<br />
des vices ou la livraison de remplacement<br />
reste sans succès. Le client a les mêmes droits sans<br />
délai si nous refusons sérieusement et définitivement<br />
l’élimination des vices ou la livraison de<br />
remplacement. Tous autres droits résultant de<br />
vices - en particulier les droits de dommages et<br />
intérêts contractuels et extracontractuels - sont<br />
exclus dans les limites prévues par le paragraphe 7.
Allgemeine In<strong>for</strong>mationen<br />
General in<strong>for</strong>mations<br />
In<strong>for</strong>mations générales<br />
Allgemeine Geschäftsbedingungen<br />
General Conditions of Sale<br />
Conditions générales de vente<br />
7.2 Die vorstehenden Haftungsbeschränkungen<br />
gelten nicht (i) <strong>für</strong> Personenschäden, (ii) <strong>für</strong> eine<br />
etwaige Produzentenhaftung sowie (iii) bei<br />
schuldhafter Verletzung wesentlicher Pflichten<br />
aus dem Schuldverhältnis, soweit hierdurch das<br />
Erreichen des Vertragszwecks gefährdet ist; in<br />
dem unter (iii) genannten Fall ist unsere Haftung<br />
jedoch auf den Ersatz der vorhersehbaren (typischerweise<br />
eintretenden) Schäden beschränkt.<br />
7.3 Sollten unsere Produktin<strong>for</strong>mationen entgegen<br />
Ziffer 1.5 nicht den jeweiligen Adressaten zugehen<br />
und durch unsere Ware Schäden entstehen, die<br />
bei Beachtung unserer Produktin<strong>for</strong>mationen vermieden<br />
worden wären, hat uns der Kunde von<br />
allen Ansprüchen, die im Zusammenhang mit solchen<br />
Schäden gegen uns gleich aus welchem<br />
Rechtsgrund geltend gemacht werden, auf erste<br />
An<strong>for</strong>derung freizustellen bzw. von uns bereits<br />
geleistete Ersatzzahlungen zu erstatten. Eine weitergehende<br />
Haftung des Kunden bleibt hiervon<br />
unberührt.<br />
8. Erfüllungsort, Gerichtsstand, anwendbares Recht,<br />
salvatorische Klausel<br />
8.1 Erfüllungsort ist der Ort unseres Lieferwerkes, <strong>für</strong><br />
die Zahlungspflicht des Kunden der Ort der in<br />
unserer Rechnung angegebenen Bankverbindung.<br />
8.2 Gerichtsstand <strong>für</strong> alle Rechtsstreitigkeiten, auch<br />
<strong>für</strong> Wechsel-, Scheck- und sonstige Urkundenprozesse,<br />
ist unser Gesellschaftssitz. Wir können<br />
den Kunden jedoch auch bei den Gerichten seines<br />
allgemeinen Gerichtsstandes verklagen.<br />
8.3 Für alle Rechtsbeziehungen zwischen uns und<br />
dem Kunden gilt ausschließlich das <strong>für</strong> die Rechtsbeziehungen<br />
inländischer Parteien maßgebliche<br />
Recht der Bundesrepublik Deutschland.<br />
8.4 Im Falle der Unwirksamkeit einzelner Vertragsbestimmungen<br />
bleiben die übrigen verbindlich. Die<br />
unwirksame Vertragsbestimmung ist durch eine<br />
Regelung zu ersetzen, die der mit der unwirksamen<br />
Regelung verfolgten wirtschaftlichen<br />
Zielsetzung am nächsten kommt.<br />
Stand: Januar 2002<br />
7.3 If, in contrast to point 1.5, our product in<strong>for</strong>mation<br />
does not go to the respective addressee and if<br />
damage should occur due to our goods, which<br />
would have been avoided if our product in<strong>for</strong>mation<br />
had been complied with, the Buyer must<br />
release us, upon our initial request, from all claims<br />
relating to such damages which can be asserted<br />
against us on no matter what legal foundation or<br />
reimburse us <strong>for</strong> any compensation payments we<br />
may already have made. This does not affect any<br />
further liability of the Buyer.<br />
8. Place of Per<strong>for</strong>mance, Place of Jurisdiction,<br />
Governing Law, Partial Invalidity<br />
8.1 The place of per<strong>for</strong>mance is the place of our supply<br />
of goods; <strong>for</strong> the client’s obligation to pay it is<br />
the place of our bank account as stipulated in our<br />
invoice.<br />
8.2 The place of jurisdiction <strong>for</strong> all legal disputes, as<br />
well as <strong>for</strong> summary bill en<strong>for</strong>cement proceedings,<br />
proceedings arising from payments by cheque,<br />
and other proceedings restricted to documentary<br />
evidence is our place of management.<br />
We can, however, also take proceedings against<br />
the Buyer in the courts of his general place of<br />
jurisdiction.<br />
8.3 With regard to all legal relations between us and<br />
the Buyer, the governing law of the Federal<br />
Republic of Germany only applies to the legal<br />
relations of domestic parties.<br />
8.4 Should any of the individual contractual conditions<br />
be invalid, the remaining conditions still<br />
remain valid. The invalid contractual condition is<br />
to be replaced with a rule which is closest to the<br />
financial objectives expressed in the invalid regulation.<br />
As of: January 2002<br />
6.7 Les droits de garantie deviennent caduques 1 an<br />
après livraison de la marchandise, au plus tard 13<br />
mois après notre déclaration indiquant que la<br />
marchandise est prête à être expédiée.<br />
6.8 Le client a droit sans limite aux droits de garantie<br />
légaux si nous avons dissimulé frauduleusement<br />
un vice.<br />
7. Responsabilité<br />
7.1 Nous assumons la responsabilité des dommages<br />
directs, des manques à gagner, des économies<br />
manquées, des dommages consécutifs et/ou indirects<br />
ainsi que des frais engagés par nos clients<br />
ou des tiers en relation avec l’amorce, l’exécution<br />
ou la résiliation d’un contrat, sous réserve des<br />
règles suivantes, et seulement si nos représentants<br />
légaux ou cadres supérieurs ont causé le<br />
dommage / les frais par manquement volontaire<br />
ou négligence grave; en cas de négligence grave<br />
de la part de simples préposés, nous n’assumons<br />
de responsabilité que jusqu’à concurrence des<br />
dommages ou frais prévisibles (typiques). Notre<br />
responsabilité contractuelle, extracontractuelle et<br />
autre est exclue indépendamment de la base juridique<br />
de la demande de dommages et intérêts<br />
(en particulier également en cas de manquement<br />
aux devoirs et obligations résultant d’un rapport<br />
fondamental contractuel ou légal, en cas d’empêchements<br />
à la prestation existants déjà lors de la<br />
passation du contrat et d’agissement non autorisé)<br />
dans la mesure où la culpabilité de nos représentants<br />
légaux ou de nos cadres supérieurs ne<br />
peut être prouvée ou si on ne peut leur reprocher<br />
qu’une négligence légère.<br />
7.2 Les limitations de responsabilité ci-dessus ne sont<br />
pas valables (i) en cas de préjudice corporel, (ii) de<br />
responsabilité quelconque du producteur ainsi<br />
que (iii) en cas d’infraction fautive aux devoirs et<br />
obligations essentielles résultant du rapport fondamental<br />
dans la mesure où la réussite de l’objectif<br />
du contrat s’en trouve remise en cause; dans<br />
le cas du point (iii) cependant, notre responsabilité<br />
est limitée à l’indemnisation des dommages<br />
prévisibles (typiques).<br />
7.3 Si nos in<strong>for</strong>mations produits, contrairement aux<br />
dispositions du paragraphe 1.5, venaient à ne pas<br />
parvenir au destinataire respectif et si notre marchandise<br />
est la source de dommages qui auraient<br />
pu être évités si nos in<strong>for</strong>mations produits avaient<br />
été respectées, le client est tenu de nous libérer à<br />
notre première demande de tous droits qu’il pourrait<br />
faire valoir à notre égard en relation avec de<br />
tels dommages, sur quelque base juridique que ce<br />
soit, ou de nous rembourser les dommages et<br />
intérêts déjà payés. Ceci ne touche en rien à toute<br />
responsabilité du client allant au-delà.<br />
8. Lieu d’exécution, tribunal compétent,<br />
droit applicable, clause salvatrice<br />
8.1 Le lieu d’exécution est le lieu de notre usine, pour<br />
l’obligation de paiement du client le lieu de l’identité<br />
bancaire mentionnée sur notre facture.<br />
8.2 Le tribunal compétent pour tous litiges, y compris<br />
pour les procédures touchant à des effets, chèques<br />
et autres documents officiels, est le siège de<br />
notre société. Nous pouvons cependant porter<br />
plainte contre le client auprès des tribunaux généralement<br />
compétents pour lui.<br />
8.3 Est valable exclusivement, pour toutes les relations<br />
juridiques entre le client et nous, le droit de<br />
la République fédérale d’Allemagne déterminant<br />
pour les relations juridiques entre parties allemandes.<br />
8.4 La nullité de certaines dispositions du contrat ne<br />
touche en rien les autres qui restent contraignantes.<br />
La disposition nulle sera remplacée par un<br />
règlement le plus proche possible de l’objectif<br />
économique poursuivi par le règlement nul.<br />
Etat: janvier 2002<br />
i26
<strong>Zubehör</strong> <strong>für</strong> Holztüren<br />
mit 4 mm Falzluft, Türverschlüsse mit 20 mm Stulpbreite<br />
A 1-2<br />
A 3<br />
A 4<br />
A 5<br />
A 6<br />
A 7<br />
A 8-9<br />
Fallen-Riegel-Schließbleche<br />
A<br />
Fallen-Schließbleche • Schließbleche <strong>für</strong> Türspalt-Sicherung • Schließbleche <strong>für</strong> Rundbolzen<br />
Schließbleche und Schließkästen <strong>für</strong> Rundbolzen<br />
Schließbleche und Schließkästen <strong>für</strong> Schwenkriegel<br />
Schließbleche und Schließkästen <strong>für</strong> Bolzen-Schwenkriegelkombination<br />
Schließplatten <strong>für</strong> Rollzapfen • Bandseiten-Sicherungen<br />
<strong>Zubehör</strong> <strong>für</strong> Holztüren mit 4 mm Falzluft, Türverriegelungen mit 16 mm Stulpbreite
<strong>Zubehör</strong> <strong>für</strong> Holztüren 4 mm Falzluft, 20 mm Stulpbreite<br />
Fallen-Riegel-Schließbleche<br />
Nr. 14 Winkel-Schließblech, 500 x 20 x 20 x 3 mm,<br />
käntig oder abgerundet, R = 10 mm<br />
Nr. 14-1 wie vor, jedoch 500 x 25 x 25 x 3 mm<br />
Nr. 15 Winkel-Schließblech, 250 x 32 x 25 x 3 mm, Stegmaß 3,5 mm,<br />
käntig oder abgerundet, R = 10 mm<br />
Nr. 15-3 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner,<br />
Rs oder Ls, passendes AT-Stück: Nr. 115<br />
Nr. 15 E 1) Winkel-Schließblech, 250 x 32 x 25 x 2 mm,<br />
mit Lochung <strong>für</strong> E-Öffner,<br />
käntig oder abgerundet, R = 10 mm, Rs oder Ls,<br />
passendes AT-Stück: Nr. 115<br />
Nr. 15-502 Winkel-Schließblech, 500 x 15 x 25 x 2 mm, Anschlagschenkel<br />
käntig, Falzschenkel abgerundet, R = 15 mm, Rs oder Ls<br />
Nr. 15-502 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls,<br />
passendes AT-Stück: Nr. 115-16<br />
Nr. 15-503 E 1) 5) Winkel-Schließblech, 250 x 15 x 25 x 3 mm, Stegmaß 3,5 mm,<br />
mit Lochung <strong>für</strong> E-Öffner, käntig oder abgerundet,<br />
R = 10 mm, Rs oder Ls, passendes AT-Stück: Nr. 115-16<br />
Nr. 15-507 Winkel-Schließblech, wie Nr. 15-3, jedoch Stegmaß 7,5 mm<br />
Nr. 15-507 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls,<br />
passendes AT-Stück: Nr. 115-5<br />
Nr. 15-508 Winkel-Schließblech, wie Nr. 15-3, jedoch Stegmaß 9 mm,<br />
käntig oder abgerundet, R = 10 mm<br />
Nr. 15-508 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls,<br />
passendes AT-Stück: Nr. 115-5<br />
Nr. 15-510 Winkel-Schließblech, 250 x 32 x 25 x 3 mm, abgerundet,<br />
R = 8 mm, Stegmaß 3,5 mm<br />
Nr. 15-510 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls,<br />
passendes AT-Stück: Nr. 115<br />
Nr. 15-511 Winkel-Schließblech, 250 x 32 x 25 x 3 mm, käntig oder abgerundet,<br />
R = 10 mm, Anschraublöcher an der Biegekante<br />
(diagonale Verschraubung) <strong>für</strong> nach außen aufgehende Türen<br />
Nr. 15-511 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls,<br />
passendes AT-Stück: Nr. 115<br />
Nr. 15-513 E 1) 5) Winkel-Schließblech, 250 x 15 x 25 x 3 mm, mit Lochung <strong>für</strong><br />
E-Öffner, käntig oder abgerundet, R = 10 mm, Stegmaß 7,5 mm,<br />
Rs oder Ls, passendes AT-Stück: Nr. 115-5<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
14<br />
14-1<br />
15<br />
15-507<br />
15-508<br />
15-510<br />
15-502 15-502 E<br />
15 E<br />
15-3 E<br />
15-507 E<br />
15-508 E<br />
15-510 E<br />
15-503 E<br />
15-513 E<br />
15-511 15-511 E<br />
A 1
<strong>Zubehör</strong> <strong>für</strong> Holztüren 4 mm Falzluft, 20 mm Stulpbreite<br />
Fallen-Riegel-Schließbleche<br />
Nr. 15-519 E 1) Winkel-Schließblech, 250 x 32 x 25 x 3 mm, mit Lochung <strong>für</strong> E-Öffner,<br />
abgerundet, R = 8 mm, Stegmaß 6 mm, Rs oder Ls,<br />
passendes AT-Stück: Nr. 115-5-2<br />
Nr. 15-528 E 1) Winkel-Schließblech, Nirosta matt gebürstet,<br />
600 x 32 x 32 x 3 mm, mit Lochung <strong>für</strong> E-Öffner,<br />
käntig oder abgerundet, R = 10 mm, Stegmaß 4,5 mm, Rs oder Ls,<br />
passendes AT-Stück: Nr. 115-5-3<br />
Nr. 15-528 ET 1) Winkel-Schließblech, wie vor, jedoch mit Sperrbügel<br />
<strong>für</strong> KFV-Türverschlüsse mit Türöffnungssperre<br />
(Sonderabmessung W 122), Rs oder Ls,<br />
passendes AT-Stück: Nr. 115-5-3<br />
Nr. 17 Winkel-Schließblech, 300 x 20 x 20 x 3 mm, Stegmaß 3,5 mm<br />
käntig oder abgerundet, R = 10 mm<br />
Nr. 17 N wie Nr. 17, jedoch Fallen- und Riegeldurchbruch mit Feilnase<br />
Nr. 17 K wie Nr. 17, jedoch 250 x 20 x 20 x 3 mm<br />
Nr. 17 KN wie Nr. 17 K, jedoch Fallen- und Riegeldurchbruch mit Feilnase<br />
Nr. 17-501 wie Nr. 17, jedoch Stegmaß 5 mm<br />
Nr. 19 5) Schließblech <strong>für</strong> Wannen-Ausfräsung, 208 x 20 x 8,5 mm<br />
Nr. 19-503 5) wie vor, jedoch mit seitlichen Anschraublöchern<br />
Nr. 19-503 V 5) wie Nr. 19-503, jedoch mit verstellbarem Fallenanschlag<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
15-519 E 15-528 E 15-528 ET<br />
17<br />
17 K<br />
17-501<br />
17 N<br />
17 KN<br />
19<br />
19-503 19-503 V<br />
A 2
<strong>Zubehör</strong> <strong>für</strong> Holztüren 4 mm Falzluft, 20 mm Stulpbreite<br />
Fallen-Schließbleche<br />
Nr. 119-08-20 5) Schließblech <strong>für</strong> Wannen-Ausfräsung, 120 x 8,5 x 20 x 8,5 mm<br />
Nr. 215 Winkel-Schließblech, 150 x 32 x 25 x 3 mm,<br />
käntig oder abgerundet, R = 10 mm<br />
Nr. 215 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner,<br />
passendes AT-Stück: Nr. 115<br />
Nr. 217 Winkel-Schließblech, 150 x 20 x 20 x 3 mm,<br />
käntig oder abgerundet, R = 10 mm<br />
Schließbleche <strong>für</strong> Türspalt-Sicherung *<br />
Nr. 15 T Winkel-Schließblech mit verstellbarem Sperrbügel,<br />
Maße wie Nr. 15-3, käntig oder abgerundet,<br />
R = 10 mm, Rs oder Ls<br />
Nr. 15-503 T 5) wie vor, Maße wie Nr. 15-503, Rs oder Ls<br />
Nr. 15-507 T wie vor, Maße wie Nr. 15-507, Rs oder Ls<br />
Nr. 15-513 T 5) wie vor, Maße wie Nr. 15-513, Rs oder Ls<br />
Schließbleche <strong>für</strong> Rundbolzen<br />
Nr. 2315 Winkel-Schließblech, 150 x 32 x 25 x 3 mm, Stegmaß 3,5 mm,<br />
käntig oder abgerundet, R = 10 mm<br />
Nr. 2315-503 5) Winkel-Schließblech, 150 x 15 x 25 x 3 mm,<br />
abgerundet, R = 10 mm<br />
Nr. 2315-510 Winkel-Schließblech, 150 x 32 x 25 x 3 mm,<br />
abgerundet, R = 8 mm<br />
Nr. 2315-511 Winkel-Schließblech, 150 x 32 x 25 x 3 mm,<br />
käntig oder abgerundet, R = 10 mm, Anschraublöcher<br />
an der Biegekante <strong>für</strong> diagonale Verschraubung<br />
Nr. 2315-515 Winkel-Schließblech, 150 x 32 x 25 x 3 mm,<br />
käntig oder abgerundet, R = 10 mm, wie Nr. 2315,<br />
jedoch Stegmaß 5 mm<br />
* Weitere Schließbleche mit Sperrbügel auf Anfrage.<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
119-08-20 215 215 E<br />
217 15 T<br />
15-507 T<br />
2315<br />
2315-510<br />
2315-515<br />
15-503 T<br />
15-513 T<br />
2315-503 2315-511<br />
A 3
<strong>Zubehör</strong> <strong>für</strong> Holztüren 4 mm Falzluft, 20 mm Stulpbreite<br />
Schließbleche und Schließkästen <strong>für</strong> Rundbolzen<br />
Nr. 2315-515-1 Winkel-Schließblech, 150 x 32 x 32 x 3 mm,<br />
Nirosta matt gebürstet, käntig oder abgerundet, R = 10 mm<br />
Nr. 2317 Winkel-Schließblech, 150 x 20 x 20 x 3 mm,<br />
käntig oder abgerundet, R = 10 mm<br />
Nr. 2319-08-20 5) Schließblech <strong>für</strong> Wannen-Ausfräsung, 120 x 8,5 x 20 x 8,5 mm<br />
Nr. 2319-503-V 5) Schließblech <strong>für</strong> Wannen-Ausfräsung, 90 x 20 x 8,5 mm,<br />
verstellbar, mit seitlichen Anschraublöchern<br />
Nr. 2330-03-20 5) Flach-Schließblech, 100 x 20 x 3 mm, käntig<br />
Nr. 2330-03-20 R 5) Flach-Schließblech, 100 x 20 x 3 mm,<br />
abgerundet, R = 10 mm<br />
Nr. 2392-01-20 5) Schließkasten <strong>für</strong> Wannen-Ausfräsung,<br />
Stulp 81 x 20 x 8,5 mm, Andruck regulierbar,<br />
Kastenstärke 14 mm, mit seitlichen Anschraublöchern<br />
Nr. 2392-01-20-1 5) Schließkasten <strong>für</strong> Wannen-Ausfräsung,<br />
Stulp 138 x 20 x 8,5 mm, Kastenstärke 14,5 mm,<br />
mit Wendeplatte, Andruck regulierbar, mit seitlichen Anschraublöchern<br />
Nr. 2392-08-20 5) Schließkasten <strong>für</strong> Wannen-Ausfräsung,<br />
Stulp 81 x 20 x 8,5 mm, Andruck regulierbar,<br />
Kastenstärke 14 mm<br />
Nr. 2300-06-20 R Schließkasten, Stulp 100 x 20 x 6 mm, abgerundet,<br />
Andruck regulierbar, Kastenstärke 16 mm,<br />
einsetzbar ab 13 mm Achsmaß<br />
Nr. 2300-08-20-1 R Schließkasten, Stulp 138 x 20 x 8,5 mm, abgerundet,<br />
Kastenstärke 14,5 mm, mit Wendeplatte, Andruck regulierbar,<br />
einsetzbar ab 13 mm Achsmaß<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
2315-515-1 2317<br />
2319-503 V<br />
2319-08-20<br />
2330-03-20<br />
2330-03-20 R<br />
2392-01-20 2392-01-20-1<br />
2392-08-20 2300-06-20 R 2300-08-20-1 R<br />
A 4
<strong>Zubehör</strong> <strong>für</strong> Holztüren 4 mm Falzluft, 20 mm Stulpbreite<br />
Schließbleche und Schließkästen <strong>für</strong> Schwenkriegel<br />
Nr. 2815 Winkel-Schließblech, 150 x 32 x 25 x 3 mm, Stegmaß 4 mm,<br />
käntig oder abgerundet, R = 10 mm<br />
Nr. 2815-503 5) Winkel-Schließblech, 150 x 15 x 25 x 3 mm,<br />
abgerundet, R = 10 mm<br />
Nr. 2815-510 Winkel-Schließblech, 150 x 32 x 25 x 3 mm,<br />
abgerundet, R = 8 mm<br />
Nr. 2815-511 Winkel-Schließblech, 150 x 32 x 25 x 3 mm,<br />
Anschraublöcher an der Biegekante <strong>für</strong> diagonale Verschraubung<br />
Nr. 2815-515-1 Winkel-Schließblech, 150 x 32 x 32 x 3 mm,<br />
Nirosta matt gebürstet, käntig oder abgerundet, R = 10 mm<br />
Nr. 2817 Winkel-Schließblech, 150 x 20 x 20 x 3 mm,<br />
käntig oder abgerundet, R = 10 mm<br />
Nr. 2830-03-20 5) Flach-Schließblech, 180 x 20 x 3 mm, käntig<br />
Nr. 2830-03-20 R 5) Flach-Schließblech, 180 x 20 x 3 mm,<br />
abgerundet, R = 10 mm<br />
Nr. 2892-01-20 5) Schließkasten <strong>für</strong> Wannen-Ausfräsung,<br />
Stulp 95 x 20 x 8,5 mm, Andruck regulierbar,<br />
Kastenstärke 15 mm, mit seitlichen Anschraublöchern<br />
Nr. 2592-01-20-1 5) Schließkasten <strong>für</strong> Wannen-Ausfräsung,<br />
Stulp 138 x 20 x 8,5 mm, Kastenstärke 14,5 mm,<br />
mit Wendeplatte, Andruck regulierbar,<br />
mit seitlichen Anschraublöchern<br />
Nr. 2500-08-20-1 R Schließkasten, Stulp 138 x 20 x 8,5 mm, abgerundet,<br />
Kastenstärke 14,5 mm, mit Wendeplatte,<br />
Andruck regulierbar, einsetzbar ab 13 mm Achsmaß<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
2815<br />
2815-510<br />
2815-515-1 2817<br />
2815-503 2815-511<br />
2830-03-20<br />
2830-03-20 R<br />
2892-01-20 2592-01-20-1 2500-08-20-1 R<br />
A 5
<strong>Zubehör</strong> <strong>für</strong> Holztüren 4 mm Falzluft, 20 mm Stulpbreite<br />
Schließbleche und Schließkästen <strong>für</strong> Bolzen-Schwenkriegelkombination<br />
Nr. 3615 Winkel-Schließblech, 180 x 32 x 25 x 3 mm, Stegmaß 3,5 mm,<br />
käntig oder abgerundet, R = 10 mm<br />
Nr. 3615-503 5) Winkel-Schließblech, 180 x 15 x 25 x 3 mm,<br />
abgerundet, R = 10 mm<br />
Nr. 3615-510 Winkel-Schließblech, 180 x 32 x 25 x 3 mm,<br />
abgerundet, R = 8 mm<br />
Nr. 3615-511 Winkel-Schließblech, 180 x 32 x 25 x 3 mm,<br />
käntig oder abgerundet, R = 10 mm,<br />
Anschraublöcher an der Biegekante <strong>für</strong> diagonale Verschraubung<br />
Nr. 3615-515-1 Winkel-Schließblech, 180 x 32 x 32 x 3 mm,<br />
Nirosta matt gebürstet, käntig oder abgerundet, R = 10 mm<br />
Nr. 3617 Winkel-Schließblech, 180 x 20 x 20 x 3 mm,<br />
käntig oder abgerundet, R = 10 mm<br />
Nr. 3630-03-20 5) Flach-Schließblech, 180 x 20 x 3 mm, käntig<br />
Nr. 3630-03-20 R 5) Flach-Schließblech, 180 x 20 x 3 mm, abgerundet, R= 10 mm<br />
Nr. 3692-01-20 5) Schließkasten <strong>für</strong> Wannen-Ausfräsung,<br />
Stulp 138 x 20 x 8,5 mm,<br />
Kastenstärke 14,5 mm, mit Wendeplatte<br />
Andruck regulierbar, mit seitlichen Anschraublöchern<br />
Nr. 3600-08-20 R Schließkasten, Stulp 138 x 20 x 8,5 mm, abgerundet,<br />
Kastenstärke 14,5 mm, mit Wendeplatte,<br />
Andruck regulierbar, einsetzbar ab 13 mm Achsmaß<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
3615<br />
3615-510<br />
3615-515-1 3617<br />
3692-01-20<br />
3615-503 3615-511<br />
3630-03-20<br />
3630-03-20 R<br />
3600-08-20 R<br />
A 6
<strong>Zubehör</strong> <strong>für</strong> Holztüren 4 mm Falzluft, 20 mm Stulpbreite<br />
Schließplatten <strong>für</strong> Rollzapfen<br />
Nr. 8045-01-20 5) 81 x 20 x 8,5 mm<br />
Nr. 8045-01-20-1 5) 81 x 20 x 11 mm<br />
Nr. 8092-01-20 5) 81 x 20 x 8,5 mm<br />
mit seitlichen Anschraublöchern und Stützzapfen<br />
Bandseiten-Sicherungen<br />
Nr. 8040 5) Keilsperr-Sicherung, 110 x 20 x 9 mm,<br />
bestehend aus 2 gleichförmigen, verzahnten Keilsperrelementen,<br />
verzinkt und gelb chromatiert, einfräsbar von der Anschlagseite.<br />
Funktion: Durch die Kreisbogen-Bewegung um den Drehpunkt<br />
des Bandes verbinden sich selbsttätig 2 keilförmige<br />
Einzelelemente zu einer <strong>for</strong>m- und kraftschlüssigen Einheit.<br />
Nr. 8041 5) Keilsperr-Sicherung 100 x 20 x 6 mm,<br />
bestehend aus 2 gleichförmigen, verzahnten Keilsperrelementen,<br />
einfräsbar von der Falzseite<br />
Funktion: Durch die Kreisbogen-Bewegung<br />
um den Drehpunkt des Bandes<br />
verbinden sich selbsttätig 2 keilförmige<br />
Einzelelemente zu einer <strong>for</strong>m- und kraftschlüssigen Einheit.<br />
Nr. 8042 5) Keilsperr-Sicherung 100 x 20 x 6 mm,<br />
wie vor, jedoch verstellbar,<br />
mit 1 Sperrelement ohne<br />
und 1 Sperrelement mit angegossenem Kasten<br />
mit Innensechskant-Verstellschraube SW 4,<br />
einfräsbar von der Falzseite.<br />
Nr. 16 5) Drei-Zapfen-Sicherung 280 x 20 x 3 mm,<br />
bestehend aus einem Schließteil,<br />
käntig, mit 3 Zapfen und einem Schließblech,<br />
käntig, mit 3 Bohrungen, hell verzinkt.<br />
Funktion: Durch die Kreisbogen-Bewegung<br />
um den Drehpunkt des Bandes<br />
fahren die 3 Zapfen des Schließteiles<br />
in die entsprechenden Ausnehmungen des Schließbleches.<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
8045-01-20<br />
8045-01-20-1<br />
8040<br />
8042<br />
16<br />
8092-01-20<br />
8041<br />
A 7
<strong>Zubehör</strong> <strong>für</strong> Holztüren * 4 mm Falzluft, 16 mm Stulpbreite<br />
Fallen-Riegel-Schließbleche<br />
Nr. 19-08-18 5) Schließblech <strong>für</strong> Wannen-Ausfräsung, 208 x 18 x 8,5 mm<br />
Nr. 19-504 5) wie vor, jedoch mit seitlichen Anschraublöchern<br />
Nr. 19-504 V 5) wie Nr. 19-504, jedoch mit verstellbarem Fallenanschlag<br />
Fallen Schließblech<br />
Nr. 119-08-18 5) Schließblech <strong>für</strong> Wannen-Ausfräsung, 120 x 18 x 8,5 mm<br />
Schließbleche und Schließkasten <strong>für</strong> Rundbolzen<br />
Nr. 2319-504 V 5) Schließblech <strong>für</strong> Wannen-Ausfräsung, 90 x 18 x 8,5 mm,<br />
verstellbar, mit seitlichen Anschraublöchern<br />
Nr. 2330-03-18 5) Flach-Schließblech, 100 x 18 x 3 mm, käntig<br />
Nr. 2330-03-18 R 5) Flach-Schließblech, 100 x 18 x 3 mm, abgerundet, R = 9 mm<br />
Nr. 2392-01-20 5) Schließkasten <strong>für</strong> Wannen-Ausfräsung, Stulp 81 x 20 x 8,5 mm,<br />
Kastenstärke 14 mm, mit seitlichen Anschraublöchern<br />
Schließbleche und Schließkasten <strong>für</strong> Schwenkriegel<br />
Nr. 2830-03-18 5) Flach-Schließblech, 180 x 18 x 3 mm, käntig<br />
Nr. 2830-03-18 R 5) Flach-Schließblech, 180 x 18 x 3 mm, abgerundet, R = 9 mm<br />
Nr. 2892-01-20 5) Schließkasten <strong>für</strong> Wannen-Ausfräsung, Stulp 95 x 20 x 8,5 mm,<br />
Kastenstärke 15 mm, mit seitlichen Anschraublöchern<br />
Schließbleche und Schließkasten<br />
<strong>für</strong> Bolzen-Schwenkriegelkombination<br />
Nr. 3630-03-18 5) Flach-Schließblech, 180 x 18 x 3 mm, käntig<br />
Nr. 3630-03-18 R 5) Flach-Schließblech, 180 x 18 x 3 mm, abgerundet, R = 9 mm<br />
Nr. 3692-01-20 5) Schließkasten <strong>für</strong> Wannen-Ausfräsung, Stulp 138 x 20 x 8,5 mm<br />
Kastenstärke 14,5 mm, mit Wendeplatte und seitlichen Anschraublöchern<br />
* Für 9 mm Achsmaß. Bei einem Achsmaß von 10 mm und entsprechender Positionierung der<br />
16er-Verschluss-Stulp können auch die auf den Seiten A 1 - A 7 beschriebenen <strong>Zubehör</strong>teile<br />
eingesetzt werden.<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
19-08-18 19-504 19-504 V<br />
119-08-18 2319-504 V<br />
2392-01-20 2830-03-18<br />
2830-03-18 R<br />
3630-03-18<br />
3630-03-18 R<br />
2330-03-18<br />
2330-03-18 R<br />
2892-01-20<br />
3692-01-20<br />
A 8
<strong>Zubehör</strong> <strong>für</strong> Holztüren 4 mm Falzluft, 16 mm Stulpbreite<br />
Schließplatten <strong>für</strong> Rollzapfen<br />
Nr. 8045-01-18 5) 81 x 18 x 8,5 mm<br />
Nr. 8092-10-18 5) 90 x 18 x 10 mm, speziell <strong>für</strong> nachträglichen Einbau<br />
Bandseiten-Sicherungen<br />
Nr. 8040 5) Keilsperr-Sicherung, 110 x 20 x 9 mm,<br />
bestehend aus 2 gleichförmigen, verzahnten Keilsperrelementen,<br />
verzinkt und gelb chromatiert, einfräsbar von der Anschlagseite.<br />
Funktion: Durch die Kreisbogen-Bewegung um den Drehpunkt<br />
des Bandes verbinden sich selbsttätig 2 keilförmige<br />
Einzelelemente zu einer <strong>for</strong>m- und kraftschlüssigen Einheit.<br />
Nr. 8041 5) Keilsperr-Sicherung, 100 x 20 x 6 mm,<br />
bestehend aus 2 gleichförmigen, verzahnten<br />
Keilsperrelementen, einfräsbar von der Falzseite<br />
Funktion: Durch die Kreisbogen-Bewegung<br />
um den Drehpunkt des Bandes<br />
verbinden sich selbsttätig 2 keilförmige<br />
Einzelelemente zu einer <strong>for</strong>m- und<br />
kraftschlüssigen Einheit.<br />
Nr. 8042 5) Keilsperr-Sicherung, 100 x 20 x 6 mm,<br />
wie vor, jedoch verstellbar, mit 1 Sperrelement ohne<br />
und 1 Sperrelement mit angegossenem Kasten<br />
mit Innensechskant-Verstellschraube SW 4,<br />
einfräsbar von der Falzseite.<br />
Nr. 16 5) Drei-Zapfen-Sicherung, 280 x 20 x 3 mm,<br />
bestehend aus einem Schließteil, käntig, mit 3 Zapfen und einem<br />
Schließblech, käntig mit 3 Bohrungen, hell verzinkt.<br />
Funktion: Durch die Kreisbogen-Bewegung<br />
um den Drehpunkt des Bandes<br />
fahren die 3 Zapfen des Schließteiles<br />
in die entsprechenden Ausnehmungen<br />
des Schließbleches.<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
8045-01-18 8092-10-18<br />
8040<br />
8042<br />
16<br />
8041<br />
A 9
<strong>Zubehör</strong> <strong>für</strong> Holztüren<br />
mit Euro-Nut und Euro-Falz<br />
B 1<br />
B 2- 7<br />
B 8-11<br />
B 12-14<br />
<strong>für</strong> Holztüren mit Euro-Nut 6/8 x 4 mm<br />
<strong>für</strong> Holztüren mit Euro-Nut 7/8 x 4 mm<br />
<strong>für</strong> Holztüren mit Euro-Falz 18 x 8 mm<br />
<strong>für</strong> Holztüren mit Euro-Falz 20 x 8 mm<br />
B
<strong>Zubehör</strong> <strong>für</strong> Holztüren<br />
Fallen-Riegel-Schließbleche<br />
Nr. 25-505 5) U-Profil-Schließblech, 245 x 8 x 18 x 8 x 2 mm,<br />
Guss-Endkappen mit Führungsnocken<br />
Nr. 25-505 E 2) 5) U-Profil-Schließblech, 245 x 8 x 24 x 8 x 2 mm,<br />
mit Lochung <strong>für</strong> E-Öffner, mit Führungsbolzen und Endkappen,<br />
Rs oder Ls, passendes AT-Stück: Nr. 116-08<br />
Nr. 25-505-2 E 1) U-Profil-Schließblech, 245 x 32 x 25 x 6,5 x 2 mm,<br />
mit Lochung <strong>für</strong> E-Öffner, mit Führungsbolzen,<br />
Anschlagschenkel abgerundet, R = 10 mm, passendes AT-Stück: Nr. 115<br />
Fallen-Schließbleche<br />
Nr. 125-505 5) U-Profil-Schließblech, 140 x 8 x 18 x 8 x 2 mm,<br />
Guss-Endkappen mit Führungsnocken<br />
Nr. 125-505 E 2) 5) U-Profil-Schließblech, 180 x 8 x 24 x 8 x 2 mm,<br />
mit Lochung <strong>für</strong> E-Öffner, mit Führungsbolzen und Endkappen,<br />
passendes AT-Stück: Nr. 116-08<br />
Schließblech <strong>für</strong> Rundbolzen<br />
Nr. 2325-505 5) U-Profil-Schließblech, 140 x 8 x 18 x 8 x 2 mm,<br />
Guss-Endkappen mit Führungsnocken<br />
Schließblech <strong>für</strong> Schwenkriegel<br />
Nr. 2825-505 5) U-Profil-Schließblech, 180 x 8 x 18 x 8 x 2 mm,<br />
Guss-Endkappen mit Führungsnocken<br />
Schließblech <strong>für</strong><br />
Bolzen-Schwenkriegelkombination<br />
Nr. 3625-505 5) U-Profil-Schließblech, 180 x 8 x 18 x 8 x 2 mm,<br />
Guss-Endkappen mit Führungsnocken<br />
Schließplatte <strong>für</strong> Rollzapfen<br />
Nr. 8092-602 5) 56 x 15 x 10 mm<br />
Bandseiten-Sicherung<br />
Nr. 8042-010 5) Keilsperr-Sicherung, bestehend aus:<br />
1 Sperrelement 100 x 24 x 8 mm<br />
und 1 verstellbaren Sperrelement 100 x 24 x 3 mm,<br />
mit Innensechskant-Verstellschraube SW 4<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
Euro-Nut 6/8 x 4 mm,<br />
11 mm Falzluft, 16 mm Stulpbreite<br />
25-505 25-505 E 25-505-2 E<br />
125-505 125-505 E<br />
2325-505 2825-505<br />
3625-505 8092-602 8042-010<br />
B 1
<strong>Zubehör</strong> <strong>für</strong> Holztüren<br />
Fallen-Riegel-Schließbleche<br />
Nr. 15-504 U-Profil-Schließblech, 245 x 32 x 25 x 6,5 x 2 mm,<br />
mit Führungsbolzen, Anschlagschenkel käntig oder abgerundet,<br />
R = 10 mm, mit Endkappen<br />
Nr. 15-504 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls,<br />
passendes AT-Stück: Nr. 115<br />
Nr. 15-504-4 E 1) wie Nr. 15-504 E, jedoch 245 x 20 x 25 x 7 x 2 mm,<br />
Anschlagschenkel abgerundet, R = 8 mm, Rs oder Ls,<br />
passendes AT-Stück: Nr. 115<br />
Nr. 15-504-5 E 1) 5) wie Nr. 15-504 E, jedoch 245 x 15 x 25 x 6,5 x 2 mm,<br />
Anschlagschenkel käntig, Rs oder Ls,<br />
passendes AT-Stück: Nr. 115<br />
Nr. 25-503 5) U-Profil-Schließblech, 245 x 6 x 20 x 6 x 2 mm,<br />
Endkappen mit Führungsnocken<br />
Nr. 25-504 5) U-Profil-Schließblech, 245 x 8 x 18 x 8 x 2 mm,<br />
Guss-Endkappen mit Führungsnocken<br />
Nr. 25-504 E 2) 5) U-Profil-Schließblech, 245 x 8 x 24 x 8 x 2 mm,<br />
mit Lochung <strong>für</strong> E-Öffner, Stegmaß 5 mm,<br />
mit Führungsbolzen und Endkappen, Rs oder Ls,<br />
passendes AT-Stück: Nr. 116-08<br />
Nr. 25-504-3 E 2) 5) U-Profil-Schließblech, wie Nr. 25-504 E,<br />
jedoch 245 x 6 x 24 x 6 x 2 mm,<br />
Stegmaß 3 mm, Rs oder Ls, passendes AT-Stück: Nr. 116-06<br />
Nr. 25-504-5 E 1) 5) U-Profil-Schließblech, wie Nr. 25-504 E,<br />
jedoch 245 x 8 x 28 x 8 x 2 mm,<br />
Stegmaß 9 mm, passend bei Einsatz von Türverriegelungen<br />
mit 24 mm Stulpbreite, Rs oder Ls, mit Führungsbolzen und Endkappen,<br />
passendes AT-Stück: Nr. 116-08-5<br />
Nr. 25-504-7 E 2) 5) U-Profil-Schließblech, wie Nr. 25-504 E,<br />
jedoch Stegmaß 3 mm, Rs oder Ls, passendes AT-Stück: Nr. 116-08<br />
Nr. 25-504-8 E 1) U-Profil-Schließblech, 245 x 8 x 24 x 32 x 2 mm,<br />
einsetzbar in Verbindung mit 3-teiligen Schließleisten<br />
mit Führungsbolzen und Endkappen, Rs oder Ls,<br />
passendes AT-Stück: Nr. 115<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
Euro-Nut 7/8 x 4 mm,<br />
11 mm Falzluft, 16 mm Stulpbreite<br />
15-504 15-504 E 15-504-4 E<br />
15-504-5 E 25-503<br />
25-504 25-504 E<br />
25-504-3 E<br />
25-504-5 E<br />
25-504-7 E<br />
25-504-8 E<br />
B 2
<strong>Zubehör</strong> <strong>für</strong> Holztüren<br />
Fallen-Schließbleche<br />
Nr. 125-503 5) U-Profil-Schließblech, 140 x 6 x 20 x 6 x 2 mm,<br />
Endkappen mit Führungsnocken<br />
Nr. 125-504 5) U-Profil-Schließblech, 140 x 8 x 18 x 8 x 2 mm,<br />
Guss-Endkappen mit Führungsnocken<br />
Nr. 125-504 E 2) 5) U-Profil-Schließblech, 180 x 8 x 24 x 8 x 2 mm,<br />
mit Lochung <strong>für</strong> E-Öffner, mit Führungsbolzen und Endkappen,<br />
passendes AT-Stück: Nr. 116-08<br />
Schließbleche <strong>für</strong> Türspalt-Sicherung<br />
Nr. 15-504 T U-Profil-Schließblech mit verstellbarem Sperrbügel,<br />
Maße wie Nr. 15-504, mit Führungsbolzen und Endkappen,<br />
Anschlagschenkel käntig oder abgerundet,<br />
R = 10 mm, Rs oder Ls<br />
Nr. 25-504 T U-Profil-Schließblech mit verstellbarem Sperrbügel,<br />
245 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und<br />
Endkappen, Rs oder Ls<br />
Schließbleche <strong>für</strong> Rundbolzen<br />
Nr. 2315-504 U-Profil-Schließblech, 140 x 32 x 25 x 6,5 x 2 mm,<br />
mit Führungsbolzen, Anschlagschenkel käntig<br />
oder abgerundet, R = 10 mm, mit Endkappen<br />
Nr. 2325-503 5) U-Profil-Schließblech, 140 x 6 x 20 x 6 x 2 mm,<br />
Endkappen mit Führungsnocken<br />
Nr. 2325-504 5) U-Profil-Schließblech, 140 x 8 x 18 x 8 x 2 mm,<br />
Guss-Endkappen mit Führungsnocken<br />
Nr. 2325-504 V 5) U-Profil-Schließblech, 140 x 8 x 22 x 8 x 2 mm,<br />
verstellbar über Exenterdorn<br />
Nr. 2325-504-3 5) U-Profil-Schließblech, 140 x 6 x 24 x 6 x 2 mm,<br />
mit Führungsbolzen und Endkappen<br />
Nr. 2325-504-5 5) U-Profil-Schließblech, 140 x 8 x 28 x 8 x 2 mm,<br />
passend bei Einsatz von Türverriegelungen<br />
mit 24 mm Stulpbreite, mit Führungsbolzen und Endkappen<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
Euro-Nut 7/8 x 4 mm,<br />
11 mm Falzluft, 16 mm Stulpbreite<br />
125-503 125-504<br />
15-504 T 25-504 T<br />
125-504 E<br />
2315-504<br />
2325-503 2325-504 2325-504-3<br />
2325-504 V 2325-504-5<br />
B 3
<strong>Zubehör</strong> <strong>für</strong> Holztüren<br />
Schließbleche <strong>für</strong> Schwenkriegel<br />
Nr. 2815-504 U-Profil-Schließblech, 180 x 32 x 25 x 6,5 x 2 mm,<br />
mit Führungsbolzen, Anschlagschenkel käntig<br />
oder abgerundet, R = 10 mm, mit Endkappen<br />
Nr. 2825-503 5) U-Profil-Schließblech, 180 x 6 x 20 x 6 x 2 mm,<br />
Endkappen mit Führungsnocken<br />
Nr. 2825-504 5) U-Profil-Schließblech, 180 x 8 x 18 x 8 x 2 mm,<br />
Guss-Endkappen mit Führungsnocken<br />
Nr. 2825-504-3 5) U-Profil-Schließblech, 180 x 6 x 24 x 6 x 2 mm,<br />
mit Führungsbolzen und Endkappen<br />
Nr. 2825-504-5 5) U-Profil-Schließblech, 180 x 8 x 28 x 8 x 2 mm,<br />
passend bei Einsatz von Türverriegelungen<br />
mit 24 mm Stulpbreite, mit Führungsbolzen und Endkappen<br />
Schließbleche <strong>für</strong><br />
Bolzen-Schwenkriegelkombination<br />
Nr. 3615-504 U-Profil-Schließblech, 180 x 32 x 25 x 6,5 x 2 mm,<br />
mit Führungsbolzen, Anschlagschenkel käntig<br />
oder abgerundet, R = 10 mm, mit Endkappen<br />
Nr. 3625-503 5) U-Profil-Schließblech, 180 x 6 x 20 x 6 x 2 mm,<br />
Endkappen mit Führungsnocken<br />
Nr. 3625-504 5) U-Profil-Schließblech, 180 x 8 x 18 x 8 x 2 mm,<br />
Guss-Endkappen mit Führungsnocken<br />
Nr. 3625-504-3 5) U-Profil-Schließblech, 180 x 6 x 24 x 6 x 2 mm,<br />
mit Führungsbolzen und Endkappen<br />
Nr. 3625-504-5 5) U-Profil-Schließblech, 180 x 8 x 28 x 8 x 2 mm,<br />
passend bei Einsatz von Türverriegelungen mit 24 mm<br />
Stulpbreite, mit Führungsbolzen und Endkappen<br />
Schließplatte <strong>für</strong> Rollzapfen<br />
Nr. 8092-603 5) 56 x 15 x 10 mm<br />
Bandseiten-Sicherung<br />
Nr. 8042-010 5) Keilsperr-Sicherung, bestehend aus:<br />
1 Sperrelement 100 x 24 x 8 mm und<br />
1 verstellbaren Sperrelement 100 x 24 x 3 mm,<br />
mit Innensechskant-Verstellschraube SW 4<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
Euro-Nut 7/8 x 4 mm,<br />
11 mm Falzluft, 16 mm Stulpbreite<br />
2815-504 2825-503 2825-504<br />
2825-504-3<br />
2825-504-5<br />
3625-504<br />
3615-504 3625-503<br />
3625-504-3<br />
3625-504-5<br />
8092-603 8042-010<br />
B 4
<strong>Zubehör</strong> <strong>für</strong> Holztüren<br />
Schließleisten<br />
Euro-Nut 7/8 x 4 mm,<br />
11 mm Falzluft, 16 mm Stulpbreite<br />
Nr. M 2530-504-1 5) V U-Profil-Leiste, dreiteilig, bestehend aus:<br />
Oberteil Nr. M 2530-504-1 OV, 1095 x 8 x 24 x 8 x 2 mm,<br />
Unterteil Nr. M 2530-504-1 UV, 910 x 8 x 24 x 8 x 2 mm,<br />
beide Leisten mit Führungsbolzen, Rs oder Ls,<br />
passend <strong>für</strong> AS 2300 und AS 4350,<br />
Andruck regulierbar durch verstellbare Gussplatte,<br />
sowie <strong>für</strong> Hauptschloss:<br />
U-Profil-Schließblech Nr. 25-504-8 E, 245 x 32 x 24 x 8 x 2 mm,<br />
mit Führungsbolzen, mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. M 2530-504-1 VT 5) wie vor, jedoch obere Leiste Nr. 2530-504-1-O<br />
mit verstellbarem Sperrbügel <strong>für</strong> Türspalt-Sicherung,<br />
Rs oder Ls<br />
auf Anfrage<br />
Nr. M 2530-504-1 V 5) U-Profil-Leiste, dreiteilig, bestehend aus:<br />
Oberteil Nr. M 2530-504-1 OV, 1095 x 8 x 24 x 8 x 2 mm,<br />
Unterteil Nr. M 2530-504-1 UV, 910 x 8 x 24 x 8 x 2 mm,<br />
beide Leisten mit Führungsbolzen, Rs oder Ls,<br />
passend <strong>für</strong> AS 2300 und AS 4350,<br />
Andruck regulierbar durch verstellbare Gussplatte,<br />
sowie <strong>für</strong> Hauptschloss:<br />
U-Profil-Schließblech Nr. 25-504-7 V, 245 x 8 x 24 x 8 x 2 mm,<br />
mit Führungsbolzen, mit verstellbarem Fallenanschlag, Rs oder Ls<br />
Nr. M 2530-504-1 V wie vor, jedoch mit U-Profil-Schließblech Nr. 25-504-7 E,<br />
AT-Stück Nr. 116-08<br />
Sonderausführung der vorgenannten Leisten:<br />
W 68 <strong>für</strong> überhohe Türen einsetzbar<br />
Nr. M 2530-504-3 5) U-Profil-Leiste, dreiteilig, bestehend aus:<br />
Oberteil Nr. 2530-504-3-O und Unterteil Nr. 2530-504-3-U,<br />
jede Leiste 1095 x 6 x 24 x 6 x 2 mm,<br />
mit Führungsbolzen, Stegmaß 3 mm,<br />
passend <strong>für</strong> AS 2300* und AS 4350*<br />
sowie <strong>für</strong> Hauptschloss:<br />
U-Profil-Schließblech Nr. 15-504 E, AT-Stück Nr. 115<br />
245 x 32 x 25 x 6 x 2 mm,<br />
Alternativ: mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls, oder<br />
U-Profil-Schließblech Nr. 15-504,<br />
245 x 32 x 25 x 6 x 2 mm oder<br />
U-Profil-Schließblech Nr. 25-504-3 E 5) ,<br />
245 x 6 x 24 x 6 x 2 mm,<br />
mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. M 2530-504-3 T wie vor, jedoch obere Leiste Nr. 2530-504-3-O<br />
mit verstellbarem Sperrbügel <strong>für</strong> Türspalt-Sicherung, Rs oder Ls<br />
auf Anfrage<br />
* Passend <strong>für</strong> Türverriegelungen in Standardmaßen. Schließleisten <strong>für</strong> Verriegelungen mit<br />
Sonderabmessungen (W-Ausführungen o.ä.) und <strong>für</strong> andere Verschlusstypen auf Anfrage.<br />
★ Neben der Artikel-Nr. <strong>für</strong> dreiteilige Leisten ist bei Auftragserteilung auch die Nummer<br />
des Hauptschloss-Schließbleches anzugeben. Fehlt dieser Vermerk,<br />
werden nur die Leisten (Ober- und Unterteil) geliefert.<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7 M 2530-504 -3 ★<br />
M 2530-504-1 V ★<br />
+25-504-8 E<br />
M 2530-504 -1 V ★<br />
+25-504-7 E<br />
M 2530-504-1 V ★<br />
+25-504-7 V<br />
+15-504 E<br />
B 5
<strong>Zubehör</strong> <strong>für</strong> Holztüren<br />
Schließleisten<br />
Euro-Nut 7/8 x 4 mm,<br />
11 mm Falzluft, 16 mm Stulpbreite<br />
Nr. M 2560-504-1 V 5) U-Profil-Leiste, dreiteilig, bestehend aus:<br />
Oberteil Nr. M 2560-504-1 OV, 1095 x 8 x 24 x 8 x 2 mm,<br />
Unterteil Nr. M 2560-504-1 UV, 910 x 8 x 24 x 8 x 2 mm,<br />
beide Leisten mit Führungsbolzen, Rs oder Ls,<br />
passend <strong>für</strong> AS 2600,<br />
Andruck regulierbar durch verstellbare Gussplatte,<br />
sowie <strong>für</strong> Hauptschloss:<br />
U-Profil-Schließblech Nr. 25-504-8 E, 245 x 32 x 24 x 8 x 2 mm,<br />
mit Führungsbolzen, mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. M 2560-504-1 VT wie vor, jedoch obere Leiste Nr. 2560-504-1-O<br />
mit verstellbarem Sperrbügel <strong>für</strong> Türspalt-Sicherung,<br />
Rs oder Ls<br />
auf Anfrage<br />
Nr. M 2560-504-1 V 5) U-Profil-Leiste, dreiteilig, bestehend aus:<br />
Oberteil Nr. M 2560-504-1 OV, 1095 x 8 x 24 x 8 x 2 mm,<br />
Unterteil Nr. M 2560-504-1 UV, 910 x 8 x 24 x 8 x 2 mm,<br />
beide Leisten mit Führungsbolzen, Rs oder Ls,<br />
passend <strong>für</strong> AS 2600,<br />
Andruck regulierbar durch verstellbare Gussplatte,<br />
sowie <strong>für</strong> Hauptschloss:<br />
U-Profil-Schließblech Nr. 25-504-7 V, 245 x 8 x 24 x 8 x 2 mm,<br />
mit Führungsbolzen, mit verstellbarem Fallenanschlag, Rs oder Ls<br />
Sonderausführungen der vorgenannten Leisten:<br />
W 6 Fräsbild angepasst an AS 2300<br />
W 68 <strong>für</strong> überhohe Türen einsetzbar<br />
Nr. M 2560-504-3 5) U-Profil-Leiste, dreiteilig, bestehend aus:<br />
Oberteil Nr. 2560-504-3 O, 1095 x 6 x 24 x 6 x 2 mm<br />
und Unterteil Nr. 2560-504-3 U, 881 x 6 x 24 x 6 x 2 mm,<br />
beide Leisten mit Führungsbolzen, Stegmaß 3 mm,<br />
Rs oder Ls, passend <strong>für</strong> AS 2600*<br />
sowie <strong>für</strong> Hauptschloss:<br />
U-Profil-Schließblech Nr. 15-504, 245 x 32 x 25 x 6 x 2 mm oder<br />
U-Profil-Schließblech Nr. 15-504 E, 245 x 32 x 25 x 6 x 2 mm,<br />
mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls, oder<br />
Alternativ: U-Profil-Schließblech Nr. 25-504-3 E 5) ,<br />
245 x 6 x 24 x 6 x 2 mm, mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. M 2560-504-3 T wie vor, jedoch obere Leiste Nr. 2560-504-3-O<br />
mit verstellbarem Sperrbügel <strong>für</strong> Türspalt-Sicherung,<br />
Rs oder Ls<br />
auf Anfrage<br />
* Passend <strong>für</strong> Türverriegelungen in Standardmaßen. Schließleisten <strong>für</strong> Verriegelungen mit<br />
Sonderabmessungen (W-Ausführungen o.ä.) und <strong>für</strong> andere Verschlusstypen auf Anfrage.<br />
★ Neben der Artikel-Nr. <strong>für</strong> dreiteilige Leisten ist bei Auftragserteilung auch die Nummer<br />
des Hauptschloss-Schließbleches anzugeben. Fehlt dieser Vermerk,<br />
werden nur die Leisten (Ober- und Unterteil) geliefert.<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7 M 2560-504-1 V ★<br />
+25-504-8 E<br />
M 2560-504-1 V ★<br />
+25-504-7 E<br />
M 2560-504-1 V ★<br />
+25-504-7 V<br />
M 2560-504-3 ★<br />
+15-504 E<br />
B 6
<strong>Zubehör</strong> <strong>für</strong> Holztüren<br />
Schließleisten<br />
Nr. D 2530-504-1 V U-Profil-Leiste, einteilig,<br />
passend <strong>für</strong> AS 2300 und AS 4350,<br />
Andruck regulierbar durch verstellbare Gussplatte,<br />
sowie <strong>für</strong> Hauptschloss: mit verstellbarem Fallenanschlag<br />
Maße: 2350 x 8 x 24 x 8 x 2 mm<br />
Sonderausführung der vorgenannten Leiste:<br />
W 68 <strong>für</strong> überhohe Türen einsetzbar<br />
Maße: 2350 x 8 x 24 x 8 x 2 mm<br />
Nr. D 2550-504-1 V U-Profil-Leiste, einteilig,<br />
passend <strong>für</strong> AS 2500 und AS 4900,<br />
Andruck regulierbar durch verstellbare Gussplatte,<br />
sowie <strong>für</strong> Hauptschloss: mit verstellbarem Fallenanschlag<br />
Maße: 2350 x 8 x 24 x 8 x 2 mm<br />
Sonderausführung der vorgenannten Leiste:<br />
W 68 <strong>für</strong> überhohe Türen einsetzbar<br />
Maße: 2350 x 8 x 24 x 8 x 2 mm<br />
Nr. D 2560-504-1 V U-Profil-Leiste, einteilig,<br />
passend <strong>für</strong> AS 2600,<br />
Andruck regulierbar durch verstellbare Gussplatte,<br />
sowie <strong>für</strong> Hauptschloss: mit verstellbarem Fallenanschlag<br />
Maße: 2350 x 8 x 24 x 8 x 2 mm<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
Euro-Nut 7/8 x 4 mm,<br />
11 mm Falzluft, 16 mm Stulpbreite<br />
D 2530-504-1 V<br />
D 2550-504-1 V<br />
D 2560-504-1 V<br />
B 7
<strong>Zubehör</strong> <strong>für</strong> Holztüren<br />
Fallen-Riegel-Schließbleche<br />
Nr. 19-512 V Schließblech, 208 x 18 x 8,5 mm,<br />
mit verstellbarem Fallenanschlag und seitlichen Anschraublöchern<br />
Nr. 25-512 5) U-Profil-Schließblech, 245 x 8x 18 x 8 x 2 mm,<br />
mit Guss-Endkappen<br />
Nr. 25-512 E 2) U-Profil-Schließblech, 245 x 32 x 18 x 8 x 2 mm,<br />
mit Lochung <strong>für</strong> E-Öffner,<br />
Anschlagschenkel abgerundet, R = 10 mm,<br />
Rs oder Ls,<br />
Einsetzbar in Verbindung mit 3-teiligen Schließleisten,<br />
passendes AT-Stück: Nr. 115-512<br />
mit Guss-Endkappen<br />
Nr. 25-512 V U-Profil-Schließblech, 245 x 8 x 18 x 8 x 2 mm,<br />
mit Guss-Endkappen, mit verstellbarem Fallenanschlag,<br />
Andruck regulierbar durch verstellbare Gussplatte.<br />
Einsetzbar in Verbindung mit 3-teiligen Schließleisten<br />
Nr. 25-512-1 5) U-Profil-Schließblech -erhöhte Stabilität -<br />
245 x 7 x 25 x 12 x 2 mm, (Blendrahmen muss gefräst werden,<br />
einsetzbar in Verbindung mit 3-teiligen Schließleisten)<br />
Nr. 25-512-1 E 1) U-Profil-Schließblech - erhöhte Stabilität -<br />
245 x 32 x 25 x 12 x 2 mm, Stegmaß 2,5 mm,<br />
mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls,<br />
(Blendrahmen muss gefräst werden,<br />
einsetzbar in Verbindung mit 3-teiligen Schließleisten)<br />
passendes AT-Stück: Nr. 115 (115-16)<br />
Nr. 25-512-5 E 1) U-Profil-Schließblech, wie Nr. 25-512-1 E 1) ,<br />
jedoch Stegmaß 4,5 mm, Rs oder Ls<br />
(Blendrahmen muss gefräst werden,<br />
einsetzbar in Verbindung mit 3-teiligen Schließleisten)<br />
passendes AT-Stück: Nr. 115-5-3<br />
Fallen-Schließblech<br />
Nr. 125-512 5) U-Profil-Schließblech, 140 x 8 x 18 x 8 x 2 mm,<br />
mit Guss-Endkappen<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
Euro-Falz 18 x 8 mm,<br />
11 mm Falzluft, 16 mm Stulpbreite<br />
25-512 E<br />
19-512 V 25-512<br />
25-512-1 E<br />
25-512-5 E<br />
25-512 V<br />
25-512-1<br />
125-512<br />
B 8
<strong>Zubehör</strong> <strong>für</strong> Holztüren<br />
Schließbleche <strong>für</strong> Rundbolzen<br />
Nr. 2319-512 V Schließblech, 90 x 18 x 8,5 mm, verstellbar,<br />
mit seitlichen Anschraublöchern<br />
Nr. 2325-512 5) U-Profil-Schließblech, 140 x 8 x 18 x 8 x 2 mm,<br />
mit Guss-Endkappen<br />
Schließblech <strong>für</strong> Schwenkriegel<br />
Nr. 2825-512 5) U-Profil-Schließblech, 180 x 8 x 18 x 8 x 2 mm,<br />
mit Guss-Endkappen<br />
Schließblech <strong>für</strong><br />
Bolzen-Schwenkriegelkombination<br />
Nr. 3625-512 5) U-Profil-Schließblech, 180 x 8 x 18 x 8 x 2 mm,<br />
mit Guss-Endkappen<br />
Schließplatte <strong>für</strong> Rollzapfen<br />
Nr. 8092-612 5) 55 x 17 x 9 mm<br />
Bandseiten-Sicherung<br />
Nr. 8041-070 5) Keilsperr-Sicherung bestehend aus<br />
2 gleichförmigen, verzahnten<br />
Keilsperrelementen 100 x 18 x 5,5 mm<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
Euro-Falz 18 x 8 mm,<br />
11 mm Falzluft, 16 mm Stulpbreite<br />
2319-512 V 2325-512<br />
2825-512<br />
3625-512<br />
8092-612 8041-070<br />
B 9
<strong>Zubehör</strong> <strong>für</strong> Holztüren<br />
Schließleisten<br />
Nr. M 2530-512 V U-Profil-Leiste, dreiteilig, bestehend aus:<br />
Oberteil Nr. M 2530-512-OV, 1095 x 8 x 18 x 8 x 2 mm,<br />
Unterteil Nr. M 2530-512-UV, 910 x 8 x 18 x 8 x 2 mm,<br />
passend <strong>für</strong> AS 2300 und AS 4350,<br />
Andruck regulierbar durch verstellbare Gussplatte,<br />
sowie <strong>für</strong> Hauptschloss:<br />
U-Profil-Schließblech Nr. 25-512 E, AT-Stück Nr. 115-512,<br />
245 x 32 x 18 x 8 x 2 mm,<br />
mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. M 2530-512 V U-Profil-Leiste, dreiteilig, bestehend aus:<br />
Oberteil Nr. M 2530-512-OV, 1095 x 8 x 18 x 8 x 2 mm,<br />
Unterteil Nr. M 2530-512-UV, 910 x 8 x 18 x 8 x 2 mm,<br />
passend <strong>für</strong> AS 2300 und AS 4350,<br />
Andruck regulierbar durch verstellbare Gussplatte,<br />
sowie <strong>für</strong> Hauptschloss:<br />
U-Profil-Schließblech Nr. 25-512 V, 245 x 8 x 18 x 8 x 2 mm,<br />
mit verstellbarem Fallenanschlag<br />
Sonderausführung der vorgenannten Leisten:<br />
W 68 <strong>für</strong> überhohe Türen einsetzbar<br />
Nr. M 2560-512 V U-Profil-Leiste, dreiteilig, bestehend aus:<br />
Oberteil Nr. M 2560-512-OV, 1095 x 8 x 18 x 8 x 2 mm,<br />
Unterteil Nr. M 2560-512-UV, 910 x 8 x 18 x 8 x 2 mm,<br />
passend <strong>für</strong> AS 2600,<br />
Andruck regulierbar durch verstellbare Gussplatte,<br />
sowie <strong>für</strong> Hauptschloss:<br />
U-Profil-Schließblech Nr. 25-512 V, 245 x 8 x 18 x 8 x 2 mm,<br />
mit verstellbarem Fallenanschlag<br />
Nr. M 2560-512 V U-Profil-Leiste, dreiteilig, bestehend aus:<br />
Oberteil Nr. M 2560-512-OV, 1095 x 8 x 18 x 8 x 2 mm,<br />
Unterteil Nr. M 2560-512-UV, 910 x 8 x 18 x 8 x 2 mm,<br />
passend <strong>für</strong> AS 2600,<br />
Andruck regulierbar durch verstellbare Gussplatte,<br />
sowie <strong>für</strong> Hauptschloss:<br />
U-Profil-Schließblech Nr. 25-512 E, AT-Stück Nr. 115-512,<br />
245 x 32 x 18 x 8 x 2 mm,<br />
mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Sonderausführungen der vorgenannten Leisten:<br />
W6 Fräsbild angepasst an AS 2300<br />
W 68 <strong>für</strong> überhohe Türen einsetzbar<br />
Hinweis: Für Euro-Falz 18 x 8 mm kann aus technischen Gründen die obere Schließleiste<br />
mit Hebelarm <strong>für</strong> TS/TSH nicht angefertigt werden.<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
Euro-Falz 18 x 8 mm,<br />
11 mm Falzluft, 16 mm Stulpbreite<br />
M 2530-512 V<br />
+25-512 E<br />
M 2530-512 V<br />
+25-512 V<br />
M 2560-512 V<br />
+25-512 V<br />
M 2560-512 V<br />
+25-512 E<br />
B 10
<strong>Zubehör</strong> <strong>für</strong> Holztüren<br />
Schließleisten<br />
Nr. D 2530-512 V U-Profil-Leiste, einteilig,<br />
passend <strong>für</strong> AS 2300 und AS 4350,<br />
Andruck regulierbar durch verstellbare Gussplatte,<br />
sowie <strong>für</strong> Hauptschloss: mit verstellbarem Fallenanschlag<br />
Maße: 2350 x 8 x 18 x 8 x 2 mm<br />
Sonderausführung der vorgenannten Leiste:<br />
W 68 <strong>für</strong> überhohe Türen einsetzbar<br />
Maße: 2350 x 8 x 18 x 8 x 2 mm<br />
Nr. D 2550-512 V U-Profil-Leiste, einteilig,<br />
passend <strong>für</strong> AS 2500 und AS 4900,<br />
Andruck regulierbar durch verstellbare Gussplatte,<br />
sowie <strong>für</strong> Hauptschloss: mit verstellbarem Fallenanschlag<br />
Maße: 2350 x 8 x 18 x 8 x 2 mm<br />
Sonderausführung der vorgenannten Leiste:<br />
W 68 <strong>für</strong> überhohe Türen einsetzbar<br />
Maße: 2350 x 8 x 18 x 8 x 2 mm<br />
Nr. D 2560-512 V U-Profil-Leiste, einteilig,<br />
passend <strong>für</strong> AS 2600,<br />
Andruck regulierbar durch verstellbare Gussplatte,<br />
sowie <strong>für</strong> Hauptschloss: mit verstellbarem Fallenanschlag<br />
Maße: 2350 x 8 x 18 x 8 x 2 mm<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
Euro-Falz 18 x 8 mm,<br />
11 mm Falzluft, 16 mm Stulpbreite<br />
D 2530-512 V<br />
D 2550-512 V<br />
D 2560-512 V<br />
B 11
<strong>Zubehör</strong> <strong>für</strong> Holztüren<br />
Fallen-Riegel-Schließbleche<br />
Nr. 19-212 V Schließblech, 208 x 20 x 8,5 mm,<br />
mit verstellbarem Fallenanschlag und seitlichen Anschraublöchern<br />
Nr. 25-08-20 5) U-Profil-Schließblech, 245 x 8 x 20 x 8 x 2 mm,<br />
mit Endkappen<br />
Nr. 25-212 E 2) U-Profil-Schließblech, 245 x 32 x 8 x 20 x 2 mm,<br />
mit Lochung <strong>für</strong> E-Öffner,<br />
Anschlagschenkel abgerundet, R = 10 mm,<br />
mit 6 mm hohen Distanz-Endkappen (Gesamthöhe 8 mm),<br />
Rs oder Ls, passendes AT-Stück: Nr. 115-212<br />
Nr. 25-212 V 2) U-Profil-Schließblech, 245 x 8 x 20 x 8 mm,<br />
Andruck regulierbar durch verstellbare Gussplatte,<br />
einsetzbar in Verbindung mit 3-teiligen Schließleisten,<br />
passendes AT-Stück: Nr. 115-212<br />
Fallen-Schließblech<br />
Nr. 125-08-20 5) U-Profil-Schließblech, 140 x 8 x 20 x 8 mm,<br />
passend <strong>für</strong> Euro-Falz 20 x 8 mm, mit Endkappen<br />
Schließbleche <strong>für</strong> Rundbolzen<br />
Nr. 2319-212 V Schließblech, 90 x 20 x 8,5 mm, verstellbar,<br />
mit seitlichen Anschraublöchern<br />
Nr. 2325-08-20 5) U-Profil-Schließblech, 140 x 8 x 20 x 8 x 2 mm, mit Endkappen<br />
Schließblech <strong>für</strong> Schwenkriegel<br />
Nr. 2825-08-20 5) U-Profil-Schließblech, 180 x 8 x 20 x 8 x 2 mm, mit Endkappen<br />
Schließblech <strong>für</strong><br />
Bolzen-Schwenkriegelkombination<br />
Nr. 3625-08-20 5) U-Profil-Schließblech, 180 x 8 x 20 x 8 x 2 mm, mit Endkappen<br />
Schließplatte <strong>für</strong> Rollzapfen<br />
Nr. 8092-612 5) 55 x 17 x 9 mm<br />
Bandseiten-Sicherung<br />
Nr. 8041-097 5) Keilsperr-Sicherung bestehend aus<br />
2 gleichförmigen, verzahnten Keilsperrelementen 100 x 20 x 5,5 mm<br />
* Bei Einsatz von Türverriegelungen mit 16 mm breitem Stulp muss die Stulpausfräsung ca. 2 mm<br />
vom Aufdeck entfernt vorgenommen werden.<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
Euro-Falz 20 x 8 mm,<br />
11 mm Falzluft, 16* oder 20 mm Stulpbreite<br />
19-212 V 25-08-20<br />
125-08-20 2319-212 V<br />
2825-08-20<br />
25-212 E<br />
2325-08-20<br />
3625-08-20<br />
8092-612 8041-097<br />
25-212 V<br />
B 12
<strong>Zubehör</strong> <strong>für</strong> Holztüren<br />
Schließleisten<br />
Nr. M 2530-212 V U-Profil-Leiste, dreiteilig, bestehend aus:<br />
Oberteil Nr. M 2530-212-OV, 1095 x 8 x 20 x 8 x 2 mm,<br />
Unterteil Nr. M 2530-212-UV, 910 x 8 x 20 x 8 x 2 mm,<br />
Rs oder Ls, passend <strong>für</strong> AS 2300 und AS 4350,<br />
Andruck regulierbar durch verstellbare Gussplatte,<br />
sowie <strong>für</strong> Hauptschloss:<br />
U-Profil-Schließblech Nr. 25-212 E, AT-Stück Nr. 115-212,<br />
245 x 32 x 20 x 8 x 2 mm,<br />
mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. M 2530-212 V U-Profil-Leiste, dreiteilig, bestehend aus:<br />
Oberteil Nr. M 2530-212-OV, 1095 x 8 x 20 x 8 x 2 mm,<br />
Unterteil Nr. M 2530-212-UV, 910 x 8 x 20 x 8 x 2 mm,<br />
Rs oder Ls, passend <strong>für</strong> AS 2300 und AS 4350,<br />
Andruck regulierbar durch verstellbare Gussplatte,<br />
sowie <strong>für</strong> Hauptschloss:<br />
U-Profil-Schließblech Nr. 25-212 V, 245 x 8 x 20 x 8 x 2 mm,<br />
mit verstellbarem Fallenanschlag, Rs oder Ls<br />
Sonderausführung der vorgenannten Leisten:<br />
W 68 <strong>für</strong> überhohe Türen einsetzbar<br />
Nr. M 2560-212 V U-Profil-Leiste, dreiteilig, bestehend aus:<br />
Oberteil Nr. M 2560-212-OV, 1095 x 8 x 20 x 8 x 2 mm,<br />
Unterteil Nr. M 2560-212-UV, 910 x 8 x 20 x 8 x 2 mm,<br />
Rs oder Ls, passend <strong>für</strong> AS 2600,<br />
Andruck regulierbar durch verstellbare Gussplatte,<br />
sowie <strong>für</strong> Hauptschloss:<br />
U-Profil-Schließblech Nr. 25-212 V, 245 x 8 x 20 x 8 x 2 mm,<br />
mit verstellbarem Fallenanschlag, Rs oder Ls<br />
Nr. M 2560-212 V U-Profil-Leiste, dreiteilig, bestehend aus:<br />
Oberteil Nr. M 2560-212-OV, 1095 x 8 x 20 x 8 x 2 mm,<br />
Unterteil Nr. M 2560-212-UV, 910 x 8 x 20 x 8 x 2 mm,<br />
Rs oder Ls, passend <strong>für</strong> AS 2600,<br />
Andruck regulierbar durch verstellbare Gussplatte,<br />
sowie <strong>für</strong> Hauptschloss:<br />
U-Profil-Schließblech Nr. 25-212 E, AT-Stück Nr. 115-212,<br />
245 x 32 x 20 x 8 x 2 mm,<br />
mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Sonderausführungen der vorgenannten Leisten:<br />
W 6 Fräsbild angepasst an AS 2300<br />
W 68 <strong>für</strong> überhohe Türen einsetzbar<br />
Hinweis: Für Euro-Falz 20 x 8 mm kann aus technischen Gründen die obere Schließleiste<br />
mit Hebelarm <strong>für</strong> TS/TSH nicht angefertigt werden.<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
Euro-Falz 20 x 8 mm,<br />
11 mm Falzluft, 16* oder 20 mm Stulpbreite<br />
M 2530-212 V<br />
+25-212 E<br />
M 2530-212 V<br />
+25-212 V<br />
M 2560-212 V<br />
+25-212 V<br />
M 2560-212 V<br />
+25-212 E<br />
B 13
<strong>Zubehör</strong> <strong>für</strong> Holztüren<br />
Schließleisten<br />
Nr. D 2530-212 V U-Profil-Leiste, einteilig,<br />
passend <strong>für</strong> AS 2300 und AS 4350,<br />
Andruck regulierbar durch verstellbare Gussplatte,<br />
sowie <strong>für</strong> Hauptschloss: mit verstellbarem Fallenanschlag<br />
Maße: 2350 x 8 x 20 x 8 x 2 mm<br />
Sonderausführung der vorgenannten Leiste:<br />
W 68 <strong>für</strong> überhohe Türen einsetzbar<br />
Maße: 2350 x 8 x 20 x 8 x 2 mm<br />
Nr. D 2550-212 V U-Profil-Leiste, einteilig,<br />
passend <strong>für</strong> AS 2500 und AS 4900,<br />
Andruck regulierbar durch verstellbare Gussplatte,<br />
sowie <strong>für</strong> Hauptschloss: mit verstellbarem Fallenanschlag<br />
Maße: 2350 x 8 x 20 x 8 x 2 mm<br />
Sonderausführung der vorgenannten Leiste:<br />
W 68 <strong>für</strong> überhohe Türen einsetzbar<br />
Maße: 2350 x 8 x 20 x 8 x 2 mm<br />
Nr. D 2560-212 V U-Profil-Leiste, einteilig,<br />
passend <strong>für</strong> AS 2600,<br />
Andruck regulierbar durch verstellbare Gussplatte,<br />
sowie <strong>für</strong> Hauptschloss: mit verstellbarem Fallenanschlag<br />
Maße: 2350 x 8 x 20 x 8 x 2 mm<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
Euro-Falz 20 x 8 mm,<br />
11 mm Falzluft, 16* oder 20 mm Stulpbreite<br />
D 2530-212 V<br />
D 2550-212 V<br />
D 2560-212 V<br />
B 14
<strong>Zubehör</strong> <strong>für</strong> Wohnungseingangs-Holztüren<br />
mit Futter und Bekleidung<br />
C 1<br />
C 2<br />
C 3<br />
C 4<br />
C 5<br />
C 6- 7<br />
C 8- 9<br />
C 10-11<br />
Fallen-Riegel-Schließbleche • Schließbleche <strong>für</strong> Türspalt-Sicherung<br />
Schließbleche <strong>für</strong> Rundbolzen<br />
Schließbleche <strong>für</strong> Schwenkriegel<br />
Schließbleche <strong>für</strong> Bolzen-Schwenkriegelkombination<br />
Bandseiten-Sicherungen<br />
<strong>Zubehör</strong> <strong>für</strong> stumpf einschlagende Holztüren<br />
Spezial-<strong>Zubehör</strong> ”System 13”<br />
Spezial-<strong>Zubehör</strong> ”System Nova 15”<br />
C
<strong>Zubehör</strong> <strong>für</strong> WE-Holztüren<br />
Fallen-Riegel-Schließbleche<br />
Nr. 17-541 Winkel-Schließblech, mit Verstärkungsplatte <strong>für</strong><br />
Sicherheits-Verschraubung am Türfutter, 200 x 20 x 20 x 3 mm,<br />
<strong>für</strong> Distanz (Bekleidungsmaß) 12,5 mm,<br />
Falzschenkel käntig, Anschlagschenkel abgerundet,<br />
R = 10 mm, Fallen- und Riegeldurchbruch hinterfüttert<br />
Nr. 17-542 wie vor, jedoch <strong>für</strong> Distanz 14,5 mm, R = 20 mm<br />
Nr. 17-543 wie vor, jedoch <strong>für</strong> Distanz 12,5 mm, R = 20 mm<br />
Nr. 17-544 wie vor, jedoch <strong>für</strong> Distanz 11,5 mm, R = 20 mm<br />
Nr. 17-545 wie vor, jedoch <strong>für</strong> Distanz 11,0 mm, R = 20 mm<br />
Nr. 17-546 wie vor, jedoch <strong>für</strong> Distanz 10,5 mm, R = 20 mm<br />
Nr. 17-547 wie vor, jedoch <strong>für</strong> Distanz 10,0 mm, R = 20 mm<br />
Nr. 17-562 Winkel-Schließblech wie Nr. 17-541,<br />
jedoch 200 x 9 x 20 x 3 mm,<br />
<strong>für</strong> Distanz (Bekleidungsmaß) 14,5 mm, R = 10 mm<br />
Nr. 17-563 wie vor, jedoch <strong>für</strong> Distanz 12,5 mm<br />
Nr. 17-564 wie vor, jedoch <strong>für</strong> Distanz 11,5 mm<br />
Nr. 17-565 wie vor, jedoch <strong>für</strong> Distanz 11,0 mm<br />
Nr. 17-566 wie vor, jedoch <strong>für</strong> Distanz 10,5 mm<br />
Nr. 17-567 wie vor, jedoch <strong>für</strong> Distanz 10,0 mm<br />
Schließbleche <strong>für</strong> Türspalt-Sicherung<br />
Nr. 17-542 T Winkel-Schließblech mit verstellbarem Sperrbügel,<br />
mit Verstärkungsplatte <strong>für</strong> Sicherheitsverschraubung am Türfutter,<br />
Falzschenkel 28 mm breit, sonstige Maße wie Nr. 17-542<br />
Nr. 17-543 T wie vor, sonstige Maße wie Nr. 17-543<br />
Nr. 17-544 T wie vor, sonstige Maße wie Nr. 17-544<br />
Nr. 17-545 T wie vor, sonstige Maße wie Nr. 17-545<br />
Nr. 17-546 T wie vor, sonstige Maße wie Nr. 17-546<br />
Nr. 17-562 T wie vor, sonstige Maße wie Nr. 17-562<br />
Nr. 17-563 T wie vor, sonstige Maße wie Nr. 17-563<br />
Nr. 17-565 T wie vor, sonstige Maße wie Nr. 17-565<br />
Nr. 17-567 T wie vor, sonstige Maße wie Nr. 17-567<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
mit Futter und Bekleidung,<br />
4 mm Falzluft, 20 mm Stulpbreite<br />
17-541<br />
17-542<br />
17-562<br />
17-542 T<br />
17-543<br />
bis<br />
17-547<br />
17-563<br />
bis<br />
17-567<br />
17-543 T<br />
bis<br />
17-546 T<br />
17-562 T 17-563 T<br />
17-565 T<br />
17-567 T<br />
C 1
<strong>Zubehör</strong> <strong>für</strong> WE-Holztüren<br />
Schließbleche <strong>für</strong> Zusatz-Rundbolzen-Schlösser<br />
Nr. 2317-541 Winkel-Schließblech, mit Verstärkungsplatte <strong>für</strong><br />
Sicherheits-Verschraubung am Türfutter, 110 x 20 x 20 x 3 mm,<br />
<strong>für</strong> Distanz (Bekleidungsmaß) 12,5 mm, Falzschenkel käntig,<br />
Anschlagschenkel abgerundet, R = 10 mm,<br />
Rundbolzen-Durchbruch hinterfüttert<br />
Nr. 2317-542 wie vor, jedoch <strong>für</strong> Distanz 14,5 mm, R = 20 mm<br />
Nr. 2317-543 wie vor, jedoch <strong>für</strong> Distanz 12,5 mm, R = 20 mm<br />
Nr. 2317-544 wie vor, jedoch <strong>für</strong> Distanz 11,5 mm, R = 20 mm<br />
Nr. 2317-545 wie vor, jedoch <strong>für</strong> Distanz 11,0 mm, R = 20 mm<br />
Nr. 2317-546 wie vor, jedoch <strong>für</strong> Distanz 10,5 mm, R = 20 mm<br />
Nr. 2317-547 wie vor, jedoch <strong>für</strong> Distanz 10,0 mm, R = 20 mm<br />
Nr. 2317-562 Winkel-Schließblech, wie Nr. 2317-541,<br />
jedoch 110 x 9 x 20 x 3 mm,<br />
<strong>für</strong> Distanz (Bekleidungsmaß) 14,5 mm, R = 10 mm<br />
Nr. 2317-563 wie vor, jedoch <strong>für</strong> Distanz 12,5 mm<br />
Nr. 2317-564 wie vor, jedoch <strong>für</strong> Distanz 11,5 mm<br />
Nr. 2317-565 wie vor, jedoch <strong>für</strong> Distanz 11,0 mm<br />
Nr. 2317-566 wie vor, jedoch <strong>für</strong> Distanz 10,5 mm<br />
Nr. 2317-567 wie vor, jedoch <strong>für</strong> Distanz 10,0 mm<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
mit Futter und Bekleidung,<br />
4 mm Falzluft, 20 mm Stulpbreite<br />
2317-541<br />
2317-542<br />
2317-562<br />
2317-543<br />
bis<br />
2317-547<br />
2317-563<br />
bis<br />
2317-567<br />
C 2
<strong>Zubehör</strong> <strong>für</strong> WE-Holztüren<br />
Schließbleche <strong>für</strong> Zusatz-Schwenkriegel-Schlösser<br />
Nr. 2817-541 Winkel-Schließblech, mit Verstärkungsplatte <strong>für</strong><br />
Sicherheits-Verschraubung am Türfutter, 150 x 20 x 20 x 3 mm,<br />
<strong>für</strong> Distanz (Bekleidungsmaß) 12,5 mm, Falzschenkel käntig,<br />
Anschlagschenkel abgerundet, R = 10 mm,<br />
Schwenkriegel-Durchbruch hinterfüttert<br />
Nr. 2817-542 wie vor, jedoch <strong>für</strong> Distanz 14,5 mm, R = 20 mm<br />
Nr. 2817-543 wie vor, jedoch <strong>für</strong> Distanz 12,5 mm, R = 20 mm<br />
Nr. 2817-544 wie vor, jedoch <strong>für</strong> Distanz 11,5 mm, R = 20 mm<br />
Nr. 2817-545 wie vor, jedoch <strong>für</strong> Distanz 11,0 mm, R = 20 mm<br />
Nr. 2817-546 wie vor, jedoch <strong>für</strong> Distanz 10,5 mm, R = 20 mm<br />
Nr. 2817-547 wie vor, jedoch <strong>für</strong> Distanz 10,0 mm, R = 20 mm<br />
Nr. 2817-562 Winkel-Schließblech, wie Nr. 2817-541,<br />
jedoch 150 x 9 x 20 x 3 mm,<br />
<strong>für</strong> Distanz (Bekleidungsmaß) 14,5 mm, R = 10 mm<br />
Nr. 2817-563 wie vor, jedoch <strong>für</strong> Distanz 12,5 mm<br />
Nr. 2817-564 wie vor, jedoch <strong>für</strong> Distanz 11,5 mm<br />
Nr. 2817-565 wie vor, jedoch <strong>für</strong> Distanz 11,0 mm<br />
Nr. 2817-566 wie vor, jedoch <strong>für</strong> Distanz 10,5 mm<br />
Nr. 2817-567 wie vor, jedoch <strong>für</strong> Distanz 10,0 mm<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
mit Futter und Bekleidung,<br />
4 mm Falzluft, 20 mm Stulpbreite<br />
2817-541<br />
2817-542<br />
2817-562<br />
2817-543<br />
bis<br />
2817-547<br />
2817-563<br />
bis<br />
2817-567<br />
C 3
<strong>Zubehör</strong> <strong>für</strong> WE-Holztüren<br />
Schließbleche <strong>für</strong> Zusatzschlösser mit Bolzen-Schwenkriegelkombination<br />
Nr. 3617-541 Winkel-Schließblech, mit Verstärkungsplatte <strong>für</strong><br />
Sicherheits-Verschraubung am Türfutter, 200 x 20 x 20 x 3 mm,<br />
<strong>für</strong> Distanz (Bekleidungsmaß) 12,5 mm, Falzschenkel käntig,<br />
Anschlagschenkel abgerundet, R = 10 mm,<br />
Durchbruch <strong>für</strong> Bolzen-Schwenkriegelkombination hinterfüttert<br />
Nr. 3617-542 wie vor, jedoch <strong>für</strong> Distanz 14,5 mm, R = 20 mm<br />
Nr. 3617-543 wie vor, jedoch <strong>für</strong> Distanz 12,5 mm, R = 20 mm<br />
Nr. 3617-544 wie vor, jedoch <strong>für</strong> Distanz 11,5 mm, R = 20 mm<br />
Nr. 3617-545 wie vor, jedoch <strong>für</strong> Distanz 11,0 mm, R = 20 mm<br />
Nr. 3617-546 wie vor, jedoch <strong>für</strong> Distanz 10,5 mm, R = 20 mm<br />
Nr. 3617-547 wie vor, jedoch <strong>für</strong> Distanz 10,0 mm, R = 20 mm<br />
Nr. 3617-562 Winkel-Schließblech, wie Nr. 3617-541,<br />
jedoch 200 x 9 x 20 x 3 mm,<br />
<strong>für</strong> Distanz (Bekleidungsmaß) 14,5 mm, R = 10 mm<br />
Nr. 3617-563 wie vor, jedoch <strong>für</strong> Distanz 12,5 mm<br />
Nr. 3617-564 wie vor, jedoch <strong>für</strong> Distanz 11,5 mm<br />
Nr. 3617-565 wie vor, jedoch <strong>für</strong> Distanz 11,0 mm<br />
Nr. 3617-566 wie vor, jedoch <strong>für</strong> Distanz 10,5 mm<br />
Nr. 3617-567 wie vor, jedoch <strong>für</strong> Distanz 10,0 mm<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
mit Futter und Bekleidung,<br />
4 mm Falzluft, 20 mm Stulpbreite<br />
3617-541<br />
3617-542<br />
3617-562<br />
3617-543<br />
bis<br />
3617-547<br />
3617-563<br />
bis<br />
3617-567<br />
C 4
<strong>Zubehör</strong> <strong>für</strong> WE-Holztüren<br />
Bandseiten-Sicherungen<br />
Nr. 1742-541 Keilsperr-Sicherung, mit Verstärkungsplatte <strong>für</strong><br />
Sicherheits-Verschraubung am Türfutter, 110 x 20 x 20 x 3 mm,<br />
<strong>für</strong> Distanz (Bekleidungsmaß) 12,5 mm, Falzschenkel käntig,<br />
Anschlagschenkel abgerundet, R = 10 mm,<br />
Gegenstück 8042-06-20-1 mit verstellbarem Sperrelement<br />
durch Innensechskant-Verstellschraube SW 4,<br />
einfräsbar von der Falzseite<br />
Nr. 1742-542 wie vor, jedoch <strong>für</strong> Distanz 14,5 mm, R = 20 mm<br />
Nr. 1742-543 wie vor, jedoch <strong>für</strong> Distanz 12,5 mm, R = 20 mm<br />
Nr. 1742-544 wie vor, jedoch <strong>für</strong> Distanz 11,5 mm, R = 20 mm<br />
Nr. 1742-545 wie vor, jedoch <strong>für</strong> Distanz 11,0 mm, R = 20 mm<br />
Nr. 1742-546 wie vor, jedoch <strong>für</strong> Distanz 10,5 mm, R = 20 mm<br />
Nr. 1742-547 wie vor, jedoch <strong>für</strong> Distanz 10,0 mm, R = 20 mm<br />
Nr. 1742-562 Keilsperr-Sicherung, wie Nr. 1742-541,<br />
jedoch 110 x 9 x 20 x 3 mm,<br />
<strong>für</strong> Distanz (Bekleidungsmaß) 14,5 mm, R = 10 mm<br />
Nr. 1742-563 wie vor, jedoch <strong>für</strong> Distanz 12,5 mm<br />
Nr. 1742-564 wie vor, jedoch <strong>für</strong> Distanz 11,5 mm<br />
Nr. 1742-565 wie vor, jedoch <strong>für</strong> Distanz 11,0 mm<br />
Nr. 1742-566 wie vor, jedoch <strong>für</strong> Distanz 10,5 mm<br />
Nr. 1742-567 wie vor, jedoch <strong>für</strong> Distanz 10,0 mm<br />
Lieferbare Oberflächen:<br />
Winkelschließblech - Standard: verzinkt und gelb chromatiert<br />
Ferner lieferbar: hell verzinkt,<br />
weiß, braun, schwarz oder silberfarbig kunststoffbeschichtet,<br />
Eisen matt vernickelt, Messing poliert,<br />
Messing matt gebürstet,<br />
Messing matt vernickelt<br />
Oberfläche Keilsperr-Elemente - Standard: verzinkt und gelb chromatiert<br />
Ferner lieferbar: hell verzinkt<br />
Sonderausführungen: Winkelkante mit 4,5 mm Radius<br />
Winkelkante mit Fase 2,0 mm unter 450 Winkelblech: Fallen- und Riegelausstanzung<br />
mit Feilnase<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
mit Futter und Bekleidung,<br />
4 mm Falzluft, 20 mm Stulpbreite<br />
1742-541<br />
1742-542<br />
1742-562<br />
1742-543<br />
bis<br />
1742-547<br />
1742-563<br />
bis<br />
1742-567<br />
C 5
<strong>Zubehör</strong> <strong>für</strong> stumpf einschlagende Holztüren<br />
20 oder 24 mm Stulpbreite<br />
Fallen-Riegel-Schließbleche<br />
Nr. 9 Lappen-Schließblech, 200 x 26 x 3 mm,<br />
käntig oder abgerundet, Rs oder Ls<br />
Nr. 9 E 4) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls,<br />
passendes AT-Stück: Nr. 115-34<br />
Nr. 8050-05-41 Flach-Schließblech, 225 x 41,5 x 5 mm,<br />
käntig oder abgerundet, R = 10 mm<br />
Schließbleche und Schließkasten <strong>für</strong> Rundbolzen<br />
Nr. 2330-03-24 Flach-Schließblech, 100 x 24 x 3 mm, käntig<br />
Nr. 2330-03-24 R Flach-Schließblech, 100 x 24 x 3 mm, abgerundet<br />
Nr. 2333-28 RG Flach-Schließblech, 140 x 28 x 3 mm, abgerundet,<br />
R = 14 mm, verstärkt durch U-Profil 8 x 22 x 8 x 2 mm,<br />
Andruck regulierbar durch verstellbaren Gusskasten<br />
Nr. 2300-08-20-1 R Schließkasten, Stulp 138 x 20 x 8,5 mm, abgerundet,<br />
Kastenstärke 14,5 mm, mit Wendeplatte,<br />
Andruck regulierbar<br />
Schließbleche und Schließkasten<br />
<strong>für</strong> Schwenkriegel<br />
Nr. 2830-03-24 Flach-Schließblech, 180 x 24 x 3 mm, käntig<br />
Nr. 2830-03-24 R Flach-Schließblech, 180 x 24 x 3 mm, abgerundet<br />
Nr. 2833-28 RG Flach-Schließblech, 180 x 28 x 3 mm, abgerundet,<br />
R = 14 mm, verstärkt durch U-Profil 8 x 22 x 8 x 2 mm,<br />
Andruck regulierbar durch verstellbaren Gusskasten<br />
Nr. 2500-08-20-1 R Schließkasten, Stulp 138 x 20 x 8,5 mm, abgerundet,<br />
Kastenstärke 14,5 mm, mit Wendeplatte, Andruck regulierbar<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
9 9 E<br />
8050-05-41<br />
2333-28 RG<br />
2830-03-24<br />
2830-03-24 R<br />
2330-03-24<br />
2330-03-24 R<br />
2300-08-20-1 R<br />
2833-28 RG 2500-08-20-1 R<br />
C 6
<strong>Zubehör</strong> <strong>für</strong> stumpf einschlagende Holztüren<br />
20 oder 24 mm Stulpbreite<br />
Schließbleche und Schließkasten <strong>für</strong> Bolzen-Schwenkriegelkombination<br />
Nr. 3630-03-24 Flach-Schließblech, 180 x 24 x 3 mm, käntig<br />
Nr. 3630-03-24 R Flach-Schließblech, 180 x 24 x 3 mm, abgerundet<br />
Nr. 3633-28 RG Flach-Schließblech, 180 x 28 x 3 mm, abgerundet,<br />
R = 14 mm, verstärkt durch U-Profil 8 x 22 x 8 x 2 mm,<br />
Andruck regulierbar durch verstellbaren Gusskasten<br />
Nr. 3600-08-20 R Schließkasten, Stulp 138 x 20 x 8,5 mm, abgerundet,<br />
Kastenstärke 14,5 mm, mit Wendeplatte, Andruck regulierbar<br />
Bandseiten-Sicherung<br />
Nr. 8042 Keilsperr-Sicherung, bestehend aus<br />
2 verzahnten Sperrelementen 100 x 20 x 6 mm, abgerundet<br />
hiervon 1 Stück mit angegossenem Kasten,<br />
verstellbar, mit Innensechskant-Verstellschraube SW 4<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
3630-03-24<br />
3630-03-24 R<br />
3600-08-20 R<br />
3633-28 RG<br />
8042<br />
C 7
Spezial-<strong>Zubehör</strong><br />
Fallen-Riegel-Schließblech<br />
Nr. 17-580-1 E 4) Winkel-Schließblech, 250 x 9 x 28 x 3 mm, verzinkt<br />
und gelb chromatiert, mit Lochung <strong>für</strong> E-Öffner,<br />
abgerundet, R = 10 mm, Rs oder Ls, passendes At-Stück: Nr. 115-34<br />
Schließblech <strong>für</strong> Türspaltsicherung<br />
Nr. 17-580-1 T Winkel-Schließblech mit verstellbarem Sperrbügel<br />
<strong>für</strong> Türspalt-Sicherung, verzinkt und gelb chromatiert,<br />
Maße wie Nr. 17-580-1, Rs oder Ls<br />
Schließblech und Schließkasten <strong>für</strong> Rundbolzen<br />
Nr. 2317-580-1 G Winkel-Schließblech 180 x 9 x 28 x 3 mm, verzinkt<br />
und gelb chromatiert, abgerundet, R = 10 mm,<br />
Andruck regulierbar durch verstellbaren Gusskasten,<br />
Rs oder Ls<br />
Nr. 2300-08-20-1 R Schließkasten, Stulp 138 x 20 x 8,5 mm, verzinkt<br />
und gelb chromatiert, abgerundet, Kastenstärke 14,5 mm,<br />
mit Wendeplatte, Andruck regulierbar<br />
Schließblech und Schließkasten<br />
<strong>für</strong> Bolzen-Schwenkriegelkombination<br />
Nr. 3617-580-1 G Winkel-Schließblech, 180 x 9 x 28 x 3 mm, verzinkt<br />
und gelb chromatiert, abgerundet, R = 10 mm,<br />
Andruck regulierbar durch verstellbaren Gusskasten, Rs oder Ls<br />
Nr. 3600-08-20 R Schließkasten, Stulp 138 x 20 x 8,5 mm, verzinkt<br />
und gelb chromatiert, abgerundet, Kastenstärke 14,5 mm,<br />
mit Wendeplatte, Andruck regulierbar<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
”System 13“ <strong>für</strong> Holztüren mit 13 mm Achsmaß,<br />
4 mm Falzluft, 20 mm Stulpbreite, 2 mm abgesetzte Falle<br />
17-580-1 E 17-580-1 T<br />
2317-580-1 G<br />
3617-580-1 G<br />
2300-08-20-1 R<br />
3600-08-20 R<br />
C 8
Spezial-<strong>Zubehör</strong><br />
Schließleisten<br />
Nr. D 2530-280 EG - W 654 U-Profil-Leiste, einteilig, 2210 x 8 x 28 x 8 x 2 mm,<br />
verzinkt und gelb chromatiert, passend <strong>für</strong><br />
AS 2300, Standard-Drückerhöhe 1020 mm,<br />
mit 2 mm abgesetzter Falle und<br />
AS 2300 W 54, Standard-Drückerhöhe 1049 mm,<br />
mit 2 mm abgesetzter Falle,<br />
mit montiertem AT-Stück Nr. 115-34, austauschbar<br />
gegen elektrischen Türöffner eff-eff, Modell Nr. 116 E-130,<br />
Andruck regulierbar durch verstellbaren Gusskasten,<br />
Rs oder Ls<br />
Nr. D 2530-280 EGT - W 654 U-Profil-Leiste, wie vor, jedoch mit verstellbarem<br />
Sperrbügel <strong>für</strong> Türspalt-Sicherung, Rs oder Ls<br />
Nr. D 2560-280 EG - W 652 U-Profil-Leiste, einteilig, 2210 x 8 x 28 x 8 x 2 mm,<br />
verzinkt und gelb chromatiert, passend <strong>für</strong><br />
AS 2600 W 6, Drückerhöhe 1020 mm,<br />
mit 2 mm abgesetzter Falle und<br />
AS 2600 W 152, Drückerhöhe 1049 mm,<br />
mit 2 mm abgesetzter Falle,<br />
mit montiertem AT-Stück Nr. 115-34, austauschbar<br />
gegen elektrischen Türöffner eff-eff, Modell Nr. 116 E-130,<br />
Andruck regulierbar durch verstellbaren Gusskasten,<br />
Rs oder Ls<br />
Nr. D 2560-280 EGT - W 652 U-Profil-Leiste, wie vor,<br />
jedoch mit verstellbarem Sperrbügel<br />
<strong>für</strong> Türspalt-Sicherung, Rs oder Ls<br />
Diese Schließleisten sind nach unten <strong>für</strong> Bodeneinstand verlängert und ggf. <strong>für</strong> Bodenschwellen<br />
kürzbar - bis 70 mm bei Drückerhöhe 1020 mm, bis 41 mm bei Drückerhöhe 1049 mm.<br />
Ferner lieferbare Oberflächen:<br />
”System 13“ <strong>für</strong> Holztüren mit 13 mm Achsmaß,<br />
4 mm Falzluft, 20 mm Stulpbreite, 2 mm abgesetzte Falle<br />
verzinkt und hell chromatiert, silberfarbig-, weiß-, braun- oder schwarz kunststoffbeschichtet<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7 D 2530-280 EG - W 654<br />
D 2530-280 EGT - W 654<br />
C 9
Spezial-<strong>Zubehör</strong><br />
Fallen-Riegel-Schließbleche<br />
Nr. 15-530 E 4) Winkel-Schließblech, 250 x 10 x 30 x 3 mm, verzinkt<br />
und gelb chromatiert, mit Lochung <strong>für</strong> E-Öffner,<br />
Anschlagschenkel käntig, Falzschenkel abgerundet,<br />
R = 8 mm, Rs oder Ls, passendes AT-Stück: Nr.115-34<br />
Nr. 15-531 E 4) Winkel-Schließblech, 250 x 10 x 28 x 3 mm,<br />
sonst genau wie vor, Rs oder Ls<br />
Schließbleche <strong>für</strong> Türspaltsicherung<br />
Nr. 15-530 T Winkel-Schließblech mit verstellbarem Sperrbügel<br />
<strong>für</strong> Türspalt-Sicherung, verzinkt und gelb chromatiert,<br />
Maße wie Nr. 15-530, Rs oder Ls<br />
Nr. 15-531 T Winkel-Schließblech mit verstellbarem Sperrbügel<br />
<strong>für</strong> Türspalt-Sicherung, verzinkt und gelb chromatiert,<br />
Maße wie Nr. 15-531, Rs oder Ls<br />
Schließbleche und Schließkasten <strong>für</strong> Rundbolzen<br />
Nr. 2315-530 G Winkel-Schließblech, 180 x 10 x 30 x 3 mm,<br />
verzinkt und gelb chromatiert, Anschlagschenkel käntig,<br />
Falzschenkel abgerundet, R = 8 mm,<br />
Andruck regulierbar durch verstellbaren Gusskasten<br />
Nr. 2315-531 G Winkel-Schließblech, 180 x 10 x 28 x 3 mm,<br />
sonst genau wie vor<br />
Nr. 2300-08-20-1 R Schließkasten, Stulp 138 x 20 x 8,5 mm,<br />
verzinkt und gelb chromatiert, abgerundet,<br />
Kastenstärke 14,5 mm, mit Wendeplatte, Andruck regulierbar<br />
Schließbleche und Schließkasten<br />
<strong>für</strong> Bolzen-Schwenkriegelkombination<br />
Nr. 3615-530 G Winkel-Schließblech, 250 x 10 x 30 x 3 mm,<br />
verzinkt und gelb chromatiert, Anschlagschenkel käntig,<br />
Falzschenkel abgerundet, R = 8 mm,<br />
Andruck regulierbar durch verstellbaren Gusskasten, Rs oder Ls<br />
Nr. 3615-531 G Winkel-Schließblech, 250 x 10 x 28 x 3 mm,<br />
sonst genau wie vor, Rs oder Ls<br />
Nr. 3600-08-20 R Schließkasten, Stulp 138 x 20 x 8,5 mm,<br />
verzinkt und gelb chromatiert, abgerundet,<br />
Kastenstärke 14,5 mm,<br />
mit Wendeplatte, Andruck regulierbar<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
”System Nova 15“ <strong>für</strong> Holztüren mit 15 mm Achsmaß,<br />
4 mm Falzluft, 20 oder 30 mm Flachstulp oder U-Stulp 10x30x10 mm<br />
15-530 E<br />
15-531 E<br />
2315-530 G<br />
2315-531 G<br />
3615-530 G<br />
3615-531 G<br />
15-530 T<br />
15-531 T<br />
2300-08-20-1 R<br />
3600-08-20 R<br />
C 10
Spezial-<strong>Zubehör</strong><br />
Schließleisten<br />
Nr. D 2530-230 EG - W 146 U-Profil-Leiste, einteilig, 2200 x 10 x 30 x 10 x 2 mm,<br />
verzinkt und gelb chromatiert,<br />
passend <strong>für</strong> AS 2300 W 146,<br />
mit montiertem AT-Stück: Nr. 115-34,<br />
austauschbar gegen elektrischen Türöffner eff-eff,<br />
Modell Nr. 116 E-130,<br />
Andruck regulierbar durch verstellbaren Gusskasten,<br />
Rs oder Ls<br />
Nr. D 2530-230 EGT - W 146 U-Profil-Leiste, wie vor,<br />
jedoch mit verstellbarem Sperrbügel <strong>für</strong> Türspalt-Sicherung,<br />
Rs oder Ls<br />
Nr. D 2560-230 EG - W 161 U-Profil-Leiste, einteilig, 2200 x 10 x 30x 10 x 2 mm,<br />
verzinkt und gelb chromatiert,<br />
passend <strong>für</strong> AS 2600 W 161,<br />
mit montiertem AT-Stück Nr. 115-34, austauschbar gegen<br />
elektrischen Türöffner eff-eff, Modell Nr. 116 E-130,<br />
Andruck regulierbar durch verstellbaren Gusskasten,<br />
Rs oder Ls<br />
Nr. D 2560-230 EGT - W 161 U-Profil-Leiste, wie vor,<br />
jedoch mit verstellbarem Sperrbügel <strong>für</strong> Türspalt-Sicherung,<br />
Rs oder Ls<br />
Diese Schließleisten sind im unteren Bereich ausgeklinkt <strong>für</strong> Bug-/bzw. Hawik-Bodenschwellen.<br />
Bei Einsatz anderer Bodenschwellen bitte Hersteller und Artikel-Nummer angeben.<br />
Ferner lieferbare Oberflächen:<br />
”System Nova 15“ <strong>für</strong> Holztüren mit 15 mm Achsmaß,<br />
4 mm Falzluft, 20 oder 30 mm Flachstulp oder U-Stulp 10x30x10 mm<br />
verzinkt und hell chromatiert, silberfarbig-, weiß-, braun- oder schwarz kunststoffbeschichtet<br />
Die "<strong>Zubehör</strong>-Systeme 13 und Nova 15" sind <strong>für</strong> ein- und zweiflügelige Türen<br />
geeignet.<br />
Wenn Sie mehr über die beachtlichen Vorteile und vielfältigen Einsatzmöglichkeiten<br />
dieser Systeme erfahren möchten, wenden Sie sich bitte an unsere Fachberatung<br />
oder an unsere Vertriebsabteilung.<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7 D 2530-230 EG - W 146<br />
D 2530-230 EGT - W 146<br />
C 11
D 1<br />
D 2<br />
Fallen-Riegel-Schließbleche <strong>für</strong> Profilsysteme<br />
D 3-17<br />
Flach-Schließbleche<br />
Winkel-Schließbleche<br />
U-Profil-Schließbleche<br />
D<br />
Hinweise zum Kapitel D umseitig
Fallen-Riegel-Schließbleche <strong>für</strong> Profilsysteme<br />
Hinweise zum Kapitel D<br />
AT-Stücke<br />
Im Kapitel H sind die zum Schließblech <strong>für</strong> Profil-Systeme passenden Austauschstücke angegeben. Artikel-Beschreibung siehe<br />
Kapitel G, Seite G 1 - G 2.<br />
Schließbleche mit Lochung <strong>für</strong> E-Öffner und AT-Stücke werden in der Regel getrennt bestellt und geliefert.<br />
Auf Wunsch können Schließbleche auch mit montiertem AT-Stück bezogen werden.<br />
Schließbleche <strong>für</strong> Türspalt-Sicherung<br />
Ab einer Breite von 22 mm sind Schließbleche mit verstellbarem Sperrbügel <strong>für</strong> Türspalt-Sicherung lieferbar.<br />
Bestell-Nummer wie Fallen-Riegel-Schließblech (ohne E), mit Zusatzbezeichnung T, z.B. Nr. 25-08-24 T.<br />
Die äußeren Abmessungen sind mit denen der Fallen-Riegel-Schließbleche identisch.
Fallen-Riegel-Schließbleche <strong>für</strong> Profilsysteme<br />
Flach-Schließbleche<br />
Nr. 8050-03-18 245 x 18 x 3 mm, käntig<br />
Nr. 8050-03-18 R wie vor, jedoch abgerundet<br />
Nr. 8050-03-20 245 x 20 x 3 mm, käntig<br />
Nr. 8050-03-20 R wie vor, jedoch abgerundet<br />
Nr. 8050-03-22 245 x 22 x 3 mm, käntig<br />
Nr. 8050-03-22 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner,<br />
Rs oder Ls<br />
Nr. 8050-03-24 245 x 24 x 3 mm, käntig<br />
Nr. 8050-03-24 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner,<br />
Rs oder Ls<br />
Nr. 8050-03-24 R wie Nr. 8050-03-24, jedoch abgerundet<br />
Nr. 8050-03-24 ER 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner,<br />
Rs oder Ls<br />
Nr. 8050-03-24-3 E 1) wie Nr. 8050-03-24 E, jedoch von beiden Seiten gesenkt<br />
Nr. 8050-03-28 245 x 28 x 3 mm, käntig<br />
Nr. 8050-03-28 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner,<br />
Rs oder Ls<br />
Nr. 8050-532 245 x 32 x 3 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Brügmann Fl.: HT 022; R.: HT 013<br />
Nr. 8050-532 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner,<br />
Rs oder Ls<br />
Nr. 8050-572 245 x 32 x 3 mm, mit Führungsbolzen<br />
passend <strong>für</strong> Veka Fl.: 105.181; R.: 102.118<br />
Nr. 8050-572 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner,<br />
Rs oder Ls<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
8050-03-18<br />
bis<br />
8050-03-28<br />
8050-532<br />
8050-572<br />
8050-03-22 E<br />
bis<br />
8050-03-28 E<br />
8050-532 E<br />
8050-572 E<br />
D 1
Fallen-Riegel-Schließbleche <strong>für</strong> Profilsysteme<br />
Winkel-Schließbleche<br />
Nr. 20-502 245 x 23 x 11 x 3 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Kömmerling, bei Fortfall der Füll-Leiste, Stegmaß 5,7 mm<br />
Nr. 20-502 E 1) 245 x 28 x 11 x 3 mm, sonst wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner,<br />
Rs oder Ls<br />
Nr. 20-502-1 wie Nr. 20-502, jedoch Stegmaß 4,8 mm<br />
Nr. 20-502-1 E 1) 245 x 28 x 11 x 3 mm, sonst wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner,<br />
Rs oder Ls<br />
Nr. 20-502-4 wie Nr. 20-502, jedoch 245 x 28 x 11 x 3 mm, Stegmaß 6, 8 mm<br />
Nr. 20-502-4 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 20-502-6 245 x 28 x 11 x 3 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Kömmerling Fl.: 3051; R.: 3012, Stegmaß 8 mm<br />
Nr. 20-502-6 E 2) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 20-520 245 x 34 x 7 x 3 mm, passend <strong>für</strong> Helling Fl.: 7130; R.: BI 6740<br />
Nr. 20-520 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 20-531 245 x 32 x 6 x 3 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Veka Fl.: 105.081; R.: 101.086, Stegmaß 10 mm<br />
Nr. 20-531 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 20-531-1 wie Nr. 20-531, jedoch 245 x 28 x 6 x 3 mm, Stegmaß 8,5 mm<br />
Nr. 20-531-1 E 1) 245 x 32 x 6 x 3 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 20-531-2 wie Nr. 20-531, jedoch 245 x 28 x 6 x 3 mm, Stegmaß 11 mm<br />
Nr. 20-531-2 E 1) 245 x 32 x 6 x 3 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 20-531-4 wie Nr. 20-531, jedoch Stegmaß 8,5 mm, Anschraublöcher versetzt<br />
Nr. 20-531-4 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 20-563 245 x 32 x 7 x 3 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Gromathic Fl.: GM 3121; R.: GM 3128<br />
Nr. 20-563 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 20-570 245 x 32 x 7 x 3 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> KBE Profil in Verbindung mit U-Stulp-Verschluss<br />
Nr. 20-570 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 20-591 245 x 30 x 8 x 3 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Trocal Innonova 70, Fl.: 522.400; R.: 510.200<br />
Nr. 20-591 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
20-502<br />
bis<br />
20-591<br />
20-502 E<br />
bis<br />
20-591 E<br />
D 2
Fallen-Riegel-Schließbleche <strong>für</strong> Profilsysteme<br />
U-Profil-Schließbleche<br />
Nr. 25-06-18 245 x 6 x 18 x 6 x 2 mm<br />
Nr. 25-08-18 245 x 8 x 18 x 8 x 2 mm<br />
Nr. 25-06-20 245 x 6 x 20 x 6 x 2 mm, mit Endkappen<br />
Nr. 25-08-20 245 x 8 x 20 x 8 x 2 mm, mit Endkappen<br />
Nr. 25-10-20 245 x 10 x 20 x 10 x 2 mm, mit Endkappen<br />
Nr. 25-12-20 245 x 12 x 20 x 12 x 2 mm, mit Endkappen<br />
Nr. 25-06-22 245 x 6 x 22 x 6 x 2 mm, mit Endkappen<br />
Nr. 25-06-22 E 2) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-08-22 245 x 8 x 22 x 8 x 2 mm, mit Endkappen<br />
Nr. 25-08-22 E 2) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-10-22 245 x 10 x 22 x 10 x 2 mm, mit Endkappen<br />
Nr. 25-10-22 E 2) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-06-24 245 x 6 x 24 x 6 x 2 mm, mit Endkappen<br />
Nr. 25-06-24 E 3) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-08-24 245 x 8 x 24 x 8 x 2 mm, mit Endkappen<br />
Nr. 25-08-24 E 3) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-10-24 245 x 10 x 24 x 10 x 2 mm, mit Endkappen<br />
Nr. 25-10-24 E 2) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-10-24-1 245 x 10 x 24 x 10 x 2 mm, mit Endkappen<br />
passend <strong>für</strong> Rehau Serie 707<br />
Nr. 25-10-24-1 E 2) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
25-06-18<br />
bis<br />
25-10-24-1<br />
25-06-22 E<br />
bis<br />
25-10-24-1 E<br />
D 3
Fallen-Riegel-Schließbleche <strong>für</strong> Profilsysteme<br />
U-Profil-Schließbleche<br />
Nr. 25-12-24 245 x 12 x 24 x 12 x 2 mm, mit Endkappen<br />
Nr. 25-12-24 E 2) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-06-26 245 x 6 x 26 x 6 x 2 mm, mit Endkappen<br />
Nr. 25-06-26 E 2) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-08-26 245 x 8 x 26 x 8 x 2 mm, mit Endkappen<br />
Nr. 25-08-26 E 3) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-10-26 245 x 10 x 26 x 10 x 2 mm, mit Endkappen<br />
Nr. 25-10-26 E 2) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-06-28 245 x 6 x 28 x 6 x 2 mm, mit Endkappen<br />
Nr. 25-06-28 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-08-28 245 x 8 x 28 x 8 x 2 mm, mit Endkappen<br />
Nr. 25-08-28 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-10-28 245 x 10 x 28 x 10 x 2 mm, mit Endkappen<br />
Nr. 25-10-28 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-06-30 245 x 6 x 30 x 6 x 2 mm, mit Endkappen<br />
Nr. 25-06-30 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-08-30 245 x 8 x 30 x 8 x 2 mm, mit Endkappen<br />
Nr. 25-08-30 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-10-30 245 x 10 x 30 x 10 x 2 mm, mit Endkappen<br />
Nr. 25-10-30 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner Rs oder Ls<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
25-12-24<br />
bis<br />
25-10-30<br />
25-12-24 E<br />
bis<br />
25-10-30 E<br />
D 4
Fallen-Riegel-Schließbleche <strong>für</strong> Profilsysteme<br />
U-Profil-Schließbleche<br />
Nr. 25-112 245 x 6 x 32 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
als Variante zu Nr. 20-531,<br />
passend <strong>für</strong> Veka Fl.: 105.081; R.: 101.085<br />
Nr. 25-112 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-113 245 x 6 x 22 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Osmo Compress S Fl.: 2615; R.: 2602<br />
Nr. 25-114 245 x 6 x 32 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Finstral Fl.: D 530; R.: D 533<br />
Nr. 25-114 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-116 245 x 6 x 28 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Plastival Fl.: R 7012; R.: R 7000<br />
Nr. 25-116 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-117 245 x 8 x 28 x 12 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Roplasto Fl.: 220400; R.: 210700<br />
Nr. 25-117 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-118 245 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Thyssen Fl.: H4/13-9065; R.: L3-0155<br />
Nr. 25-118 E 3) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-120 245 x 8 x 32 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Trocal Fl.: 120200; R.: 111000<br />
Nr. 25-120 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-121 245 x 8 x 32 x 16 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Kömmerling Fl.: 3023; R.: 3012<br />
Nr. 25-121 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-122 245 x 8 x 28 x 14 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Aluplast Fl.: 140031; R.: 140001<br />
Nr. 25-122 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-124 245 x 8 x 26 x 4 x 2 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Stöckel Fl.: 2262; R.: 2302<br />
Nr. 25-124 E 3) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-126 245 x 8 x 30 x 8 x 2 mm, passend <strong>für</strong> Exte Fl.: 6002; R.: 6009<br />
Nr. 25-126 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
25-112<br />
bis<br />
25-126<br />
25-112 E<br />
bis<br />
25-126 E<br />
D 5
Fallen-Riegel-Schließbleche <strong>für</strong> Profilsysteme<br />
U-Profil-Schließbleche<br />
Nr. 25-146 245 x 6 x 32 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Veka Fl.: 103.202; R.: 101.200<br />
Nr. 25-146 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-153 245 x 8 x 32 x 13 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Salamander 3D Fl.: 211240/DF4, R.: 110220/DR1<br />
Nr. 25-153 E 2) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-153-1 245 x 8 x 32 x 13 mm, mit Führungsbolzen, passend <strong>für</strong> Salamander,<br />
Anschraublöcher auf 22 mm<br />
Nr. 25-153-1 E 2) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Anschraublöcher auf 22 mm<br />
Nr. 25-501 245 x 6 x 20 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Profen Fl.: AB 105; R.: AS 102<br />
Nr. 25-501 E 2) 245 x 6 x 22 x 8 x 2 mm sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-501-1 245 x 8 x 22 x 3,3 x 2 mm, mit Guss-Endkappen,<br />
passend <strong>für</strong> Trocal-Serie 900,<br />
Fl.: 920300 (TF 923); R.: 910100 (TF 911)<br />
Nr. 25-501-1 E 2) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-504-6 245 x 6 x 32 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Kömmerling Fl.: SP 1416; R.: SP 1441<br />
Nr. 25-504-6 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-505 245 x 8 x 18 x 8 x 2 mm, mit Guss-Endkappen,<br />
passend <strong>für</strong> Fulgurit Fl.: Isopur FL 95; R.: Isopur BL 68<br />
Nr. 25-505 E 3) 245 x 8 x 24 x 8 x 2 mm sonst wie vor,<br />
jedoch mit Führungsbolzen und Endkappen,<br />
mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-506 245 x 7 x 20 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Tehalit, Brügmann-Frisoplast Serie 2001,<br />
Roplasto und Thyssen<br />
Nr. 25-506 E 2) 245 x 7 x 22 x 10 x 2 mm sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-507 245 x 8 x 20 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Rehau Serie 709<br />
Nr. 25-507 E 1) 245 x 8 x 28 x 14 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-507-01 wie Nr. 25-507, jedoch 245 x 8 x 28 x 14 x 2 mm,<br />
mit von hinten verstellbaren Führungsbolzen und Endkappen<br />
Nr. 25-507-01 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-508 245 x 6,5 x 20 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Veka Fl.: 105.014; R.: 101.019<br />
Nr. 25-508 E 1) 245 x 6,5 x 28 x 10 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-509 245 x 6,5 x 20 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Cork Plastics<br />
Nr. 25-509 E 2) 245 x 6,5 x 24 x 10 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
25-146<br />
bis<br />
25-509<br />
25-146 E<br />
bis<br />
25-509 E<br />
D 6
Fallen-Riegel-Schließbleche <strong>für</strong> Profilsysteme<br />
U-Profil-Schließbleche<br />
Nr. 25-511 245 x 6 x 20 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Stöckel Fl.: 1212; R.: 1111<br />
Nr. 25-511 E 1) 245 x 6 x 30 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-512 245 x 8 x 18 x 8 x 2 mm, mit Guss-Endkappen,<br />
passend <strong>für</strong> Isobelec Fl.: GZ 126; R.: D 70<br />
Nr. 25-518 245 x 7 x 28 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Veka Fl.: 105.013; R.: 101.018<br />
Nr. 25-518 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-519 245 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Aluplast Fl.: GF 1030; R.: GR 1000<br />
Nr. 25-519 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-519-3 245 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Aluplast Fl.: GF 1030; R.: GR 1001<br />
Nr. 25-519-3 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-520 245 x 6 x 22 x 14 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Kömmerling Fl.: 3022; R.: 3012, Stegmaß 5,7 mm<br />
Nr. 25-520 E 1) 245 x 6 x 28 x 14 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-520-2 wie Nr. 25-520, jedoch 245 x 6 x 28 x 14 x 2 mm, Stegmaß 6 mm<br />
Nr. 25-520-2 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-520-6 ersetzt durch Nr. 25-966<br />
Nr. 25-520-9 wie Nr. 25-520, jedoch Stegmaß 2,5 mm,<br />
passend <strong>für</strong> Kömmerling Fl.: SP 1233; R.: SP 1279,<br />
Nr. 25-520-9 E 1) 245 x 6 x 28 x 14 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-522 245 x 6 x 22 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Aluplast Fl.: H 10 S; R.: H 31 M<br />
Nr. 25-522 E 2) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-523 245 x 8 x 24 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> LB-Plastic Fl.: SW 7004; R.: SW 7002<br />
Nr. 25-523 E 2) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-524 245 x 8 x 20 x 8 x 2 mm, mit Guss-Endkappen, passend <strong>für</strong> Winsol<br />
Nr. 25-525 245 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Salamander Fl.: 201040 (UF 4); R.: 200020 (UR 2)<br />
mit SL 68537 beschnitten<br />
Nr. 25-525 E 1) 245 x 8 x 28 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
25-511<br />
bis<br />
25-525<br />
25-511 E<br />
bis<br />
25-525 E<br />
D 7
Fallen-Riegel-Schließbleche <strong>für</strong> Profilsysteme<br />
U-Profil-Schließbleche<br />
Nr. 25-526 245 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Salamander Fl.: 301040 (TF 13);<br />
R.: 200020 (UR 2) mit SL 68537 beschnitten<br />
Nr. 25-526 E 2) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-528 245 x 8 x 22 x 7 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Plastmo Fl.: 5032080; R.: 5032020<br />
Nr. 25-528 E 2) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-531 245 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Osmo 71/70<br />
Nr. 25-531 E 2) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-532 245 x 8 x 24 x 5 x 2 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Coopre Fl.: SB 210; R.: SB 100<br />
Nr. 25-532 E 2) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-533 ersetzt durch Nr. 25-978<br />
Nr. 25-535 245 x 8 x 24 x 12 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> KBE, Alphacan System Master und Alphacan Fersina<br />
Nr. 25-535 E 1) 245 x 8 x 28 x 12 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-536 245 x 6 x 24 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Deceuninck Fl.: 806; R.: 852<br />
Nr. 25-536 E 2) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-542 245 x 6 x 20 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> F.A.L und Actual<br />
Nr. 25-542 E 2) 245 x 6 x 24 x 6 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-547 245 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Inefa<br />
Nr. 25-547 E 1) 245 x 8 x 28 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-549 245 x 6 x 24 x 6 x 2 mm, mit Endkappen,<br />
Anschraublöcher versetzt, passend <strong>für</strong> Vekaplast<br />
Nr. 25-549 E 2) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-550 245 x 8 x 28 x 8 x 2 mm, mit Guss-Endkappen,<br />
passend <strong>für</strong> Trocal Serie 900<br />
Fl.: 920500 (TF 925); R.: 910100 (TF 911), Stegmaß 6,5 mm<br />
Nr. 25-550 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-550-3 wie Nr. 25-550, jedoch Stegmaß 7 mm<br />
Nr. 25-550-3 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
25-526<br />
bis<br />
25-550-3<br />
25-526 E<br />
bis<br />
25-550-3 E<br />
D 8
Fallen-Riegel-Schließbleche <strong>für</strong> Profilsysteme<br />
U-Profil-Schließbleche<br />
Nr. 25-555 245 x 6 x 32 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Brügmann Fl.: HT 020; R.: HT 010<br />
Nr. 25-555 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-557-01 245 x 6 x 20 x 6 x 2 mm, mit von hinten verstellbaren<br />
Führungsbolzen und Endkappen, passend <strong>für</strong> Rehau Fl.: 549050; R.:<br />
549110<br />
Nr. 25-557-01 E 2) 245 x 6 x 22 x 6 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-558 245 x 6 x 24 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Deceuninck Fl.: 855; R.: 852<br />
Nr. 25-558 E 1) 245 x 6 x 28 x 11 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-559 245 x 8 x 28 x 14 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Salamander Fl.: 301040 (TF 13); R.: 200020 (UR 2)<br />
Nr. 25-559 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-560 245 x 8 x 28x 14 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Salamander Fl.: 201040 (UF 4); R.: 200020 (UR 2)<br />
Nr. 25-560 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-563 245 x 6 x 22 x 6 x 2 mm, mit Guss-Endkappen,<br />
passend <strong>für</strong> Osmo Fl.: 2018; R.: 2017<br />
Nr. 25-563 E 2) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-569 245 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Pural Fl.: P 006; R.: P 002<br />
Nr. 25-569 E 1) 245 x 8 x 28 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-569-2 245 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Pural Fl.: P 022 (alt); R.: P 002<br />
Nr. 25-569-2 E 1) 245 x 8 x 28 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-569-3 245 x 6 x 28 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Pural Fl.: P 022; R.: P 002<br />
Nr. 25-569-3 E 2) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-573 245 x 8 x 20 x 15 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Deceuninck Fl.: 855; R.: 801<br />
Nr. 25-573 E 1) 245 x 8 x 28 x 15 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-575 245 x 6 x 28 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Helmitin Fl.: 4-60087; R.: 4-60059<br />
Nr. 25-575 E 1) 245 x 6 x 32 x 9 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
25-555<br />
bis<br />
25-575<br />
25-555 E<br />
bis<br />
25-575 E<br />
D 9
Fallen-Riegel-Schließbleche <strong>für</strong> Profilsysteme<br />
U-Profil-Schließbleche<br />
Nr. 25-582 245 x 6 x 30 x 14 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Spectus Fl.: SW 07; R.: SW 05<br />
Nr. 25-582 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-585 245 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Aluplast und Gealan<br />
Nr. 25-585 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-587 245 x 6 x 28 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Gromathic Fl.: GM 2601; R.: GM 2408<br />
Nr. 25-587 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-588 245 x 6 x 28 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Helmitin Fl.: 60087; R.: 60111<br />
Nr. 25-588 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-588-2 wie Nr. 25-722, jedoch 245 x 6 x 28 x 11 x 2 mm,<br />
Anschraublöcher versetzt, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Helmitin Fl.: 4-60193; R.: 4-60180<br />
Nr. 25-588-2 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-589 245 x 7 x 28 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Duraflex Fl.: TD 1801; R.: TD 1802<br />
Nr. 25-589 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-590 245 x 5 x 24 x 10 x 2 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Kömmerling Fl.: SP 1232; R.: SP 1249<br />
Nr. 25-590 E 1) 245 x 5 x 28 x 11 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-592 245 x 6 x 22 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Roplasto Fl.: 629802 H; R.: 611400<br />
Nr. 25-592 E 1) 245 x 6 x 26 x 11 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-594 245 x 6 x 22 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Coopre Fl.: GB 202; R.: GB 102<br />
Nr. 25-594 E 2) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-597 245 x 8 x 26 x 13 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Alphacan System Master Fl.: TIO 02; R.: ELA 02<br />
Nr. 25-597 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner,Rs oder Ls<br />
Nr. 25-702 245 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Thyssen Fl.: ZM 3-0164; R.: LM 10-0108<br />
Nr. 25-702 E 2) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-703 245 x 6 x 24 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Thyssen Fl.: H5-9070; R.: L3-0155<br />
Nr. 25-703 E 1) 245 x 6 x 28 x 6 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
25-582<br />
bis<br />
25-703<br />
25-582 E<br />
bis<br />
25-703 E<br />
D 10
Fallen-Riegel-Schließbleche <strong>für</strong> Profilsysteme<br />
U-Profil-Schließbleche<br />
Nr. 25-706 245 x 6 x 26 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Osmo Fl.: 2195; R.: 2171<br />
Nr. 25-706 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-707 245 x 8 x 20 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Plastival Fl.: R 7012; R.: R 7000<br />
Nr. 25-707 E 1) 245 x 8 x 28 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-708 245 x 6 x 22 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Veka Fl.: 103.047; R.: 101.041<br />
Nr. 25-708 E 1) 245 x 6 x 28 x 6 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-709 245 x 10 x 28 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Actual Fl.: P 1409; R.: 1402<br />
Nr. 25-709 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-713 245 x 8 x 28 x 13 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Alphacan Fersina Fl.: POR; R.: ELA<br />
Nr. 25-713 E 1) 245 x 8 x 32 x 13 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-717 245 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Alphacan Profilia und Alphacan Fersina<br />
Nr. 25-717 E 1) 245 x 8 x 30 x 13 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-718 245 x 8 x 24 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Alphacan Profilia Fl.: PK 193; R.: PF 089<br />
Nr. 25-718 E 1) 245 x 8 x 32 x 10 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-721 245 x 6 x 28 x 14 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> LB-Profile Fl.: Z 5; R.: T 7<br />
Nr. 25-721 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-722 wie Nr. 25-588-2, jedoch 245 x 8 x 28 x 13 x 2 mm,<br />
Anschraublöcher versetzt, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Helmitin Fl.: 4-60193; R.: 4-60180<br />
Nr. 25-722 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-725 245 x 8 x 28 x 11 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Roplasto Fl.: 618502; R.: 619003<br />
Nr. 25-725 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-731-1 245 x 6 x 30 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Profile 22 Fl.: 2230; R.: 2207<br />
Nr. 25-731-1 E 1) 245 x 6 x 32 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-733 245 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Plastival, Aluplast, Komarek, Primo, Rehau und Osmo,<br />
Stegmaß 5 mm<br />
Nr. 25-733 E 1) 245 x 8 x 28 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
25-706<br />
bis<br />
25-733<br />
25-706 E<br />
bis<br />
25-733 E<br />
D 11
Fallen-Riegel-Schließbleche <strong>für</strong> Profilsysteme<br />
U-Profil-Schließbleche<br />
Nr. 25-733-2 wie Nr. 25-733, jedoch 245 x 8 x 28 x 8 x 2 mm, Stegmaß 7 mm<br />
Nr. 25-733-2 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-735 245 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Aluplast Fl.: 100038; R.: 100027<br />
Nr. 25-735 E 1) 245 x 8 x 28 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-736 245 x 6 x 20 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Dimat Fl.: 621; R.: 610-3<br />
Nr. 25-736 E 1) 245 x 6 x 28 x 6 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-744 245 x 6 x 20 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Gromathic Fl.: GM 3005; R.: GM 3008<br />
Nr. 25-744 E 1) 245 x 6 x 28 x 6 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-755 245 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Komarek VI Fl.: FBI 163; R.: FBA 044<br />
Nr. 25-755 E 1) 245 x 8 x 32 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-757 245 x 8 x 30 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> ACCORD System 503<br />
Nr. 25-757 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-758 245 x 8 x 28 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Vekaplast<br />
Nr. 25-758 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-762 245 x 10 x 22 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Rehau Fl.: 560220; R.: 560490<br />
Nr. 25-762 E 1) 245 x 10 x 26 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-763 245 x 8 x 24 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> KBE Fl.: 112; R.: 102<br />
Nr. 25-763 E 2) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-764 245 x 6 x 32 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Kömmerling und Plus Plan<br />
Nr. 25-764 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-767 245 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> ACCORD Fl.: 900.222; R.: 503.601<br />
Nr. 25-767 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
25-733-2<br />
bis<br />
25-767<br />
25-733-2 E<br />
bis<br />
25-767 E<br />
D 12
Fallen-Riegel-Schließbleche <strong>für</strong> Profilsysteme<br />
U-Profil-Schließbleche<br />
Nr. 25-767-2 245 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Actual Fl.: 1508; R.: 1501<br />
Nr. 25-767-2 E 2) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-767-3 245 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Actual Fl.: 1515; R.: 1501<br />
Nr. 25-767-3 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-788 245 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> KBE, Lucobay, Spectus, Deceuninck und Stöckel<br />
Nr. 25-788 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-788-1 wie Nr. 25-788, jedoch 245 x 8 x 28 x 4 x 2 mm,<br />
mit Führungsbolzen, passend <strong>für</strong> KBE Fl.: 714; R.: 134<br />
Nr. 25-788-1 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-799 wie Nr. 25-706, jedoch 245 x 8 x 26 x 8 x 2 mm,<br />
mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Osmo Fl.: 2195; R.: 2171<br />
Nr. 25-799 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-801 245 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Thyssen Fl.: H 4-9060; R.: L 3-0155<br />
Nr. 25-801 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-802 245 x 10 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Actual System 300<br />
Nr. 25-802 E 1) 245 x 10 x 28 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-818 wie Nr. 25-881, jedoch 245 x 8 x 28 x 13 x 2 mm,<br />
mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Kömmerling Eurodur 3S, Stegmaß 7 mm<br />
Nr. 25-818 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-818-3 wie Nr. 25-818, jedoch Stegmaß 6 mm<br />
Nr. 25-818-3 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-818-5 wie Nr. 25-818, jedoch 245 x 8 x 32 x 13 x 2 mm,<br />
mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Primo FL.: 3383; R.: 3360<br />
Nr. 25-818-5 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-821 245 x 8 x 32 x 12 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Marshall Tufflex Fl.: V 21-HS; R.: F 21-57<br />
Nr. 25-821 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-847 245 x 6 x 30 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Plus Plan Fl.: FLR 120 E; R.: BLR 80 ED<br />
Nr. 25-847 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-852 245 x 8 x 24 x 15 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Deceuninck Fl.: 1707; R.: 1703<br />
Nr. 25-852 E 3) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
25-767-2<br />
bis<br />
25-852<br />
25-767-2 E<br />
bis<br />
25-852 E<br />
D 13
Fallen-Riegel-Schließbleche <strong>für</strong> Profilsysteme<br />
U-Profil-Schließbleche<br />
Nr. 25-853 245 x 6 x 28 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> LB-Profile und ACCORD<br />
Nr. 25-853 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-857 245 x 6 x 28 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Kömmerling Eurodur Gold Fl.: 1472; R.: 1461<br />
Nr. 25-857 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-862 245 x 6 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> KBE Fl.: 714; R.: 112<br />
Nr. 25-862 E 1) 245 x 6 x 28 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-867 245 x 8 x 28 x 15 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Wymar Fl.: 2217; R.: 2003<br />
Nr. 25-867 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-870 245 x 8 x 20 x 8 x 2 mm, mit von hinten verstellbaren<br />
Führungsbolzen und Endkappen, passend <strong>für</strong> Roplasto, Actual, Wymar<br />
und Scanorama<br />
Nr. 25-870 E 2) 245 x 8 x 22 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-873 245 x 6 x 26 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Vekaplast und Eurofen<br />
Nr. 25-873 E 1) 245 x 6 x 28 x 9 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-881 wie Nr. 25-818, jedoch 245 x 6 x 28 x 11 x 2 mm,<br />
Anschraublöcher versetzt, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Kömmerling Eurodur 3 S Fl.: 1416; R.: 1402<br />
Nr. 25-881 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-883 245 x 8 x 28 x 14 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Brügmann Fl.: HF 954; R.: HF 962<br />
Nr. 25-883 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-886 245 x 6 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Rehau Fl.: 551060; R.: 551080<br />
Nr. 25-886 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-891 245 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Salamander Fl.: 201040 (UF 4); R.: 206020 (US 2)<br />
Nr. 25-891 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-898 245 x 8 x 28 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Eurofen Fl.: ZP 120; R.: L 65<br />
Nr. 25-898 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
25-853<br />
bis<br />
25-898<br />
25-853 E<br />
bis<br />
25-898 E<br />
D 14
Fallen-Riegel-Schließbleche <strong>für</strong> Profilsysteme<br />
U-Profil-Schließbleche<br />
Nr. 25-900 245 x 6 x 26 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Alphacan, Deceuninck und Thyssen<br />
Nr. 25-900 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-906 245 x 7 x 28 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Salamander Fl.: 301040; R.: 206030<br />
Nr. 25-906 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-907 245 x 6 x 28 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Deceuninck Fl.: 1807; R.: 1801<br />
Nr. 25-907 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-910 245 x 7 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Status System Fl.: 907; R.: 904<br />
Nr. 25-910 E 1) 245 x 7 x 28 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-912 245 x 6 x 28 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Plastmo Fl.: 6035035; R.: 6035025<br />
Nr. 25-912 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-915 245 x 6 x 32 x 10,5 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Rehau Serie 730 und Osmo Comtess S,<br />
Anschraublöcher versetzt, Maß von Außenkante Anschlagschenkel bis<br />
Mitte Schraubloch 24 mm<br />
Nr. 25-915 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-915-1 wie Nr. 25-915, jedoch Anschraublöcher versetzt,<br />
Maß von Außenkante Anschlagschenkel bis Mitte Schraubloch 8 mm<br />
Nr. 25-915-1 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-916 245 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Knipping 3000 Fl.: SK 3055; R.: SK 3022<br />
Nr. 25-916 E 3) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-919 245 x 8 x 32 x 12 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Thyssen Fl.: H 40-9090; R.: L 60-0166<br />
Nr. 25-919 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-919-01 wie Nr. 25-919, jedoch mit von hinten verstellbaren Führungsbolzen<br />
und Endkappen<br />
Nr. 25-919-01 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-919-2 245 x 8 x 32 x 13 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Thyssen Fl.: H 3/13-9055; R.: L 6-0144<br />
Nr. 25-919-2 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
25-900<br />
bis<br />
25-919-2<br />
25-919 E<br />
bis<br />
25-919-2 E<br />
D 15
Fallen-Riegel-Schließbleche <strong>für</strong> Profilsysteme<br />
U-Profil-Schließbleche<br />
Nr. 25-926 245 x 8 x 26 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Actual Fl.: PA 1416; R.: PA 1402<br />
Nr. 25-926 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-927 245 x 8 x 26 x 12,5 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Alphacan Profilia Fl.: PE 613; R.: PE 601<br />
Nr. 25-927 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-939 245 x 8 x 28 x 15 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Lucobay Fl.: 53-08; R.: 53-21<br />
Nr. 25-939 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-940 245 x 6 x 26 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Actual Fl.: P 1508; R.: P 1501<br />
Nr. 25-940 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-941 245 x 8 x 32 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Aluplast und ACCORD<br />
Nr. 25-941 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-945 245 x 8 x 32 x 12 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Plus Plan Fl.: FR 99 V; R.: BR 76<br />
Nr. 25-945 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-947 245 x 8 x 28 x 12 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Rehau Fl.: 546210; R.: 546180<br />
Nr. 25-947 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-948 245 x 8 x 32 x 12 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Gealan Fl.: 3076; R.: 3008<br />
Nr. 25-948 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-954 245 x 8 x 32 x 15 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Explast Fl.: E 612; R.: E 600<br />
Nr. 25-954 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-958 245 x 6 x 32 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Actual Fl.: 6031; R.: 6028<br />
Nr. 25-958 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-963 245 x 8 x 30 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> ISO 60 Fl.: ISO 17; R.: ISO 1<br />
Nr. 25-963 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-964 245 x 8 x 32 x 15 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Stöckel Eco Step Fl.: 2262; R.: 2113<br />
Nr. 25-964 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
25-926<br />
bis<br />
25-964<br />
25-926 E<br />
bis<br />
25-964 E<br />
D 16
Fallen-Riegel-Schließbleche <strong>für</strong> Profilsysteme<br />
U-Profil-Schließbleche<br />
Nr. 25-966 245 x 6 x 28 x 13,5 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Deceuninck Serie Mondiale Fl.: 2021; R.: 2410<br />
Nr. 25-966 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-967 245 x 8 x 32 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Veka Matrix Fl.: 105.163; R.: 101.113<br />
Nr. 25-967 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-968 245 x 8 x 32 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Veka Matrix Fl.: 103.169; R.: 101.113<br />
Nr. 25-968 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-971 245 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> ACCORD Fl.: 503.629; R.: 503.601<br />
Nr. 25-971 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-971-1 wie Nr. 25-971, jedoch 245 x 8 x 26 x 8 x 2 mm,<br />
passend <strong>für</strong> ACCORD Fl.: AP 005; R.: AP 001<br />
Nr. 25-971-1 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-978 245 x 8 x 28 x 13 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Kömmerling-Tritec<br />
Nr. 25-978 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-978-1 E wie vor, jedoch mit versetzten Anschraublöchern im E-Öffner-Bereich<br />
Nr. 25-983 245 x 8 x 28 x 12 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Aluplast Fl.: GM 1530; R.: GR 1501<br />
Nr. 25-983 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-985 245 x 8 x 32 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Veka Matrix Fl.: 105.165; R.: 101.108<br />
Nr. 25-985 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-987 245 x 8 x 28 x 16 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Plastival Fl.: F 003; R.: F 006<br />
Nr. 25-987 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-990 245 x 8 x 32 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Spectus Fl.: SW 709; R.: SW 705<br />
Nr. 25-991 245 x 6 x 30 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Profile 22 Fl.: 2235; R.: 2238<br />
Nr. 25-991 E 2) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-997 245 x 8 x 26 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Trocal Fl.: 120200; R.: 110100<br />
Nr. 25-997 E 1) 245 x 8 x 28 x 11 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 25-999 245 x 8 x 32 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> RehauFl.: 541170; R.: 514029<br />
Nr. 25-999 E 1) wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
25-966<br />
bis<br />
25-999<br />
25-966 E<br />
bis<br />
25-999 E<br />
D 17
E 1<br />
E 2<br />
Fallen-Schließbleche <strong>für</strong> Profilsysteme<br />
E 3-19<br />
Flach-Schließbleche<br />
Winkel-Schließbleche<br />
U-Profil-Schließbleche<br />
E
Fallen-Schließbleche <strong>für</strong> Profilsysteme<br />
Flach-Schließbleche<br />
Nr. 150-03-18 140 x 18 x 3 mm, käntig<br />
Nr. 150-03-18 R wie vor, jedoch abgerundet<br />
Nr. 150-03-20 120 x 20 x 3 mm, käntig<br />
Nr. 150-03-20 R wie vor, jedoch abgerundet<br />
Nr. 150-03-22 140 x 22 x 3 mm, käntig<br />
Nr. 150-03-22 E 1) 180 x 22 x 3 mm, käntig, mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 150-03-24 120 x 24 x 3 mm, käntig<br />
Nr. 150-03-24 E 1) 180 x 24 x 3 mm, käntig, mit Lochung <strong>für</strong> E-Öffner,<br />
Nr. 150-03-24 R wie Nr. 150-03-24, jedoch abgerundet<br />
Nr. 150-03-24 ER 1) 180 x 24 x 3 mm, abgerundet, mit Lochung <strong>für</strong> E-Öffner,<br />
Nr. 150-03-28 140 x 28 x 3 mm, käntig<br />
Nr. 150-03-28 E 1) 180 x 28 x 3 mm, käntig, mit Lochung <strong>für</strong> E-Öffner,<br />
Nr. 150-532 140 x 32 x 3 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Brügmann Fl.: HT 022; R.: HT 013<br />
Nr. 150-532 E 1) 180 x 32 x 3 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 150-572 140 x 32 x 3 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Veka Fl.: 105.181; R.: 102.118<br />
Nr. 150-572 E 1) 180 x 32 x 3 mm, sonst wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
150-03-18<br />
bis<br />
150-03-28<br />
150-532<br />
150-572<br />
150-03-22 E<br />
bis<br />
150-03-28 E<br />
150-532 E<br />
150-572 E<br />
E 1
Fallen-Schließbleche <strong>für</strong> Profilsysteme<br />
Winkel-Schließbleche<br />
Nr. 120-502 140 x 23 x 11 x 3 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Kömmerling, bei Fortfall der Füll-Leiste, Stegmaß 5,7 mm<br />
Nr. 120-502 E 1) 180 x 28 x 11 x 3 mm, sonst wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 120-502-1 wie Nr. 120-502, jedoch Stegmaß 4,8 mm<br />
Nr. 120-502-1 E 1) 180 x 28 x 11 x 3 mm, sonst wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 120-502-4 wie Nr. 120-502, jedoch 140 x 28 x 11 x 3 mm, Stegmaß 6,8 mm<br />
Nr. 120-502-4 E 1) 180 x 28 x 11 x 3 mm, sonst wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 120-502-6 140 x 28 x 11 x 3 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Kömmerling Fl.: 3051; R.: 3012<br />
Nr. 120-502-6 E 2) 180 x 28 x 11 x 3 mm, sonst wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 120-520 140 x 34 x 7 x 3 mm, passend <strong>für</strong> Helling,<br />
Fl.: 7130; R.: Bl 6740<br />
Nr. 120-520 E 1) 180 x 34 x 7 x 3 mm, sonst wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 120-531 140 x 28 x 6 x 3 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Veka Fl.; 105.081; R.: 101.086, Stegmaß 10 mm<br />
Nr. 120-531 E 1) 180 x 32 x 6 x 3 mm, sonst wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 120-531-1 wie Nr. 120-531, jedoch 140 x 32 x 6 x 3 mm, Stegmaß 8,5 mm<br />
Nr. 120-531-1 E 1) 180 x 32 x 6 x 3 mm, sonst wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 120-531-2 wie Nr. 120-531, jedoch 140 x 32 x 6 x 3 mm, Stegmaß 11 mm<br />
Nr. 120-531-2 E 1) 180 x 32 x 6 x 3 mm, sonst wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 120-531-4 wie Nr. 120-531, jedoch 140 x 32 x 6 x 3 mm,<br />
Stegmaß 8,5 mm, Anschraublöcher versetzt<br />
Nr. 120-531-4 E 1) 180 x 32 x 6 x 3 mm, sonst wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 120-563 140 x 32 x 7 x 3 mm, mit Führungsbolzen<br />
passend <strong>für</strong> Gromathic Fl.: GM 3121; R.: GM 3128<br />
Nr. 120-563 E 1) 180 x 32 x 7 x 3 mm, sonst wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 120-570 140 x 32 x 7 x 3 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> KBE Profil in Verbindung mit U-Stulp-Verschluss<br />
Nr. 120-570 E 1) 180 x 32 x 7 x 3 mm, sonst wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
120-502<br />
bis<br />
120-570<br />
120-502 E<br />
bis<br />
120-570 E<br />
E 2
Fallen-Schließbleche <strong>für</strong> Profilsysteme<br />
U-Profil-Schließbleche<br />
Nr. 125-06-18 140 x 6 x 18 x 6 x 2 mm<br />
Nr. 125-08-18 140 x 8 x 18 x 8 x 2 mm<br />
Nr. 125-06-20 140 x 6 x 20 x 6 x 2 mm, mit Endkappen<br />
Nr. 125-08-20 140 x 8 x 20 x 8 x 2 mm, mit Endkappen<br />
Nr. 125-10-20 140 x 10 x 20 x 10 x 2 mm, mit Endkappen<br />
Nr. 125-12-20 140 x 12 x 20 x 12 x 2 mm, mit Endkappen<br />
Nr. 125-06-22 140 x 6 x 22 x 6 x 2 mm, mit Endkappen<br />
Nr. 125-06-22 E 2) 180 x 6 x 22 x 6 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-08-22 140 x 8 x 22 x 8 x 2 mm, mit Endkappen<br />
Nr. 125-08-22 E 2) 180 x 8 x 22 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-10-22 140 x 10 x 22 x 10 x 2 mm, mit Endkappen<br />
Nr. 125-10-22 E 2) 180 x 10 x 22 x 10 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-06-24 140 x 6 x 24 x 6 x 2 mm, mit Endkappen<br />
Nr. 125-06-24 E 3) 180 x 6 x 24 x 6 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-08-24 140 x 8 x 24 x 8 x 2 mm, mit Endkappen<br />
Nr. 125-08-24 E 3) 180 x 8 x 24 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-10-24 140 x 10 x 24 x 10 x 2 mm, mit Endkappen<br />
Nr. 125-10-24 E 3) 180 x 10 x 24 x 10 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-10-24-1 140 x 10 x 24 x 10 x 2 mm, mit Endkappen,<br />
passend <strong>für</strong> Rehau Serie 707<br />
Nr. 125-10-24-1 E 2) 180 x 10 x 24 x 10 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
125-06-18<br />
bis<br />
125-10-24-1<br />
125-06-22 E<br />
bis<br />
125-10-24-1 E<br />
E 3
Fallen-Schließbleche <strong>für</strong> Profilsysteme<br />
U-Profil-Schließbleche<br />
Nr. 125-12-24 140 x 12 x 24 x 12 x 2 mm, mit Endkappen<br />
Nr. 125-12-24 E 2) 180 x 12 x 24 x 12 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-06-26 140 x 6 x 26 x 6 x 2 mm, mit Endkappen, Stegmaß 6 mm<br />
Nr. 125-06-26 E 3) 180 x 6 x 26 x 6 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-06-26-1 E 1) wie vor, jedoch Stegmaß 5 mm, Anschraublöcher versetzt<br />
Nr. 125-08-26 140 x 8 x 26 x 8 x 2 mm, mit Endkappen<br />
Nr. 125-08-26 E 3) 180 x 8 x 26 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-10-26 140 x 10 x 26 x 10 x 2 mm, mit Endkappen<br />
Nr. 125-10-26 E 2) 180 x 10 x 26 x 10 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-06-28 140 x 6 x 28 x 6 x 2 mm, mit Endkappen<br />
Nr. 125-06-28 E 1) 180 x 6 x 28 x 6 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-08-28 140 x 8 x 28 x 8 x 2 mm, mit Endkappen<br />
Nr. 125-08-28 E 1) 180 x 8 x 28 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-10-28 140 x 10 x 28 x 10 x 2 mm, mit Endkappen<br />
Nr. 125-10-28 E 1) 180 x 10 x 28 x 10 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-06-30 140 x 6 x 30 x 6 x 2 mm, mit Endkappen<br />
Nr. 125-06-30 E 1) 180 x 6 x 30 x 6 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-08-30 140 x 8 x 30 x 8 x 2 mm, mit Endkappen<br />
Nr. 125-08-30 E 1) 180 x 8 x 30 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-10-30 140 x 10 x 30 x 10 x 2 mm, mit Endkappen<br />
Nr. 125-10-30 E 1) 180 x 10 x 30 x 10 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
125-12-24<br />
bis<br />
125-10-30<br />
125-12-24 E<br />
bis<br />
125-10-30 E<br />
E 4
Fallen-Schließbleche <strong>für</strong> Profilsysteme<br />
U-Profil-Schließbleche<br />
Nr. 125-112 140 x 6 x 32 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
als Variante zu Nr. 120-531,<br />
passend <strong>für</strong> Veka Fl.: 105.081; R.: 101.085<br />
Nr. 125-112 E 1) 180 x 6 x 32 x 9 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-113 140 x 6 x 22 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Osmo Compress S Fl.: 2615; R.: 2602<br />
Nr. 125-114 140 x 6 x 32 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Finstral Fl.: D 530; R.: D 533<br />
Nr. 125-114 E 1) 180 x 6 x 32 x 9 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-116 140 x 6 x 28 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Plastival Fl.: R 7012; R.: R 7000<br />
Nr. 125-116 E 1) 180 x 6 x 28 x 6 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-117 140 x 8 x 28 x 12 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Roplasto Fl.: 220400; R.: 210100<br />
Nr. 125-117 E 1) 180 x 8 x 28 x 12 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-118 140 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Thyssen Fl.: H4/13-9065; R.: L3-0155<br />
Nr. 125-118 E 3) 180 x 8 x 28 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-120 140 x 8 x 32 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Trocal Fl.: 120200; R.: 111000<br />
Nr. 125-120 E 1) 180 x 8 x 32 x 11 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-121 140 x 8 x 32 x 16 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Kömmerling Fl.: 3023; R.: 3012<br />
Nr. 125-121 E 1) 180 x 8 x 32 x 16 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-122 140 x 8 x 28 x 14 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Aluplast Fl.: 140031; R.: 140001<br />
Nr. 125-122 E 1) 180 x 8 x 28 x 14 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-124 140 x 8 x 26 x 4 x 2 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Stöckel Fl.: 2262; R.: 2302<br />
Nr. 125-124 E 3) 180 x 8 x 26 x 4 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-126 140 x 8 x 30 x 8 x 2 mm, passend <strong>für</strong> Exte Fl.: 6002; R.: 6009<br />
Nr. 125-126 E 1) 180 x 8 x 30 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
125-112<br />
bis<br />
125-126<br />
125-112 E<br />
bis<br />
125-126 E<br />
E 5
Fallen-Schließbleche <strong>für</strong> Profilsysteme<br />
U-Profil-Schließbleche<br />
Nr. 125-146 140 x 6 x 32 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Veka Fl.: 103.202; R.: 101.200<br />
Nr. 125-146 E 1) 180 x 6 x 32 x 9 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-153 140 x 8 x 32 x 13 x 2 mm, mit Führungsbolzen und Endkappen<br />
passend <strong>für</strong> Salamander 3D Fl.: 211240/DF4; R.: 110220/DR1<br />
Nr. 125-153 E 180 x 8 x 32 x 13 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-501 140 x 6 x 20 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Profen Fl.: AB 105; R.: AS 102<br />
Nr. 125-501 E 2) 180 x 6 x 22 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-501-1 140 x 8 x 22 x 3,3 x 2 mm, mit Guss-Endkappen,<br />
passend <strong>für</strong> Trocal-Serie 900 Fl.: 920300 (TF 923);<br />
R.: 910100 (TF 911)<br />
Nr. 125-501-1 E 2) 180 x 8 x 22 x 3,3 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-504-6 140 x 6 x 32 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Kömmerling Fl.: SP 1416; R.: SP 1441<br />
Nr. 125-504-6 E 1) 180 x 6 x 32 x 6 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-505 140 x 8 x 18 x 8 x 2 mm, mit Guss-Endkappen,<br />
passend <strong>für</strong> Fulgurit Fl.: Isopur FL 95; R.: Isopur BL 68<br />
Nr. 125-505 E 3) 180 x 8 x 24 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Führungsbolzen und Endkappen und Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-506 140 x 7 x 20 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Tehalit, Brügmann-Frisoplast Serie 2001,<br />
Roplasto und Thyssen<br />
Nr. 125-506 E 2) 180 x 7 x 22 x 10 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-507 140 x 8 x 20 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Rehau Serie 709<br />
Nr. 125-507 E 1) 180 x 8 x 28 x 13 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-507-01 wie Nr. 125-507, jedoch 140 x 8 x 28 x 14 x 2 mm, mit von hinten<br />
verstellbaren Führungsbolzen und Endkappen<br />
Nr. 125-507-01 E 1) 180 x 8 x 28 x 14 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-508 140 x 6,5 x 20 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Veka Fl.: 105.014; R.: 101.019<br />
Nr. 125-508 E 1) 180 x 6,5 x 28 x 10 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
125-146<br />
bis<br />
125-508<br />
125-146 E<br />
bis<br />
125-508 E<br />
E 6
Fallen-Schließbleche <strong>für</strong> Profilsysteme<br />
U-Profil-Schließbleche<br />
Nr. 125-509 140 x 6,5 x 20 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Cork Plastics<br />
Nr. 125-509 E 2) 180 x 6,5 x 24 x 10 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-511 140 x 6 x 20 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Stöckel Fl.: 1212; R.: 1111<br />
Nr. 125-511 E 1) 180 x 6 x 30 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-512 140 x 8 x 18 x 8 x 2 mm, mit Guss-Endkappen,<br />
passend <strong>für</strong> Isobelec Fl.: GZ 126; R.: D 70<br />
Nr. 125-518 140 x 7 x 28 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Veka Fl.: 105.013; R.: 101.018<br />
Nr. 125-518 E 1) 180 x 7 x 28 x 10 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-519 140 x 8 x 20 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Aluplast Fl.: GF 1030; R.: GR 1000<br />
Nr. 125-519 E 2) 180 x 8 x 24 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-519-3 140 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Aluplast Fl.: GF 1030; R.: GR 1001<br />
Nr. 125-519-3 E 1) 180 x 8 x 28 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-520 140 x 6 x 22 x 14 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Kömmerling Fl.: 3022; R.: 3012, Stegmaß 5,7 mm<br />
Nr. 125-520 E 2) 180 x 6 x 22 x 14 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-520-2 wie Nr. 125-520, jedoch 140 x 6 x 28 x 14 x 2 mm, Stegmaß 6 mm<br />
Nr. 125-520-2 E 1) 180 x 6 x 28 x 14 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-520-6 ersetzt durch Nr. 125-966<br />
Nr. 125-520-9 wie Nr. 125-520, jedoch Stegmaß 2,5 mm,<br />
passend <strong>für</strong> Kömmerling Fl.: SP 1233; R.: SP 1279<br />
Nr. 125-520-9 E 1) 180 x 6 x 28 x 14 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-522 140 x 6 x 22 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Aluplast Fl.: H10S; R.: H31M<br />
Nr. 125-522 E 2) 180 x 6 x 22 x 6 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-523 140 x 8 x 24 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> LB-Plastic Fl.: SW 7004; R.: SW 7002<br />
Nr. 125-523 E 2) 180 x 8 x 24 x 6 x 2 mm, sonst wie vor, jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
125-509<br />
bis<br />
125-523<br />
125-509 E<br />
bis<br />
125-523 E<br />
E 7
Fallen-Schließbleche <strong>für</strong> Profilsysteme<br />
U-Profil-Schließbleche<br />
Nr. 125-524 140 x 8 x 20 x 8 x 2 mm, mit Guss-Endkappen, passend <strong>für</strong> Winsol<br />
Nr. 125-525 140 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Salamander Fl.: 201040 (UF 4); R.: 200020 (UR 2)<br />
mit SL 68537 beschnitten<br />
Nr. 125-525 E 1) 180 x 8 x 28 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-526 140 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Salamander Fl.: 301040 (TF 13); R.: 200020 (UR 2)<br />
mit SL 68537 beschnitten<br />
Nr. 125-526 E 2) 180 x 8 x 24 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-528 140 x 8 x 22 x 7 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Plastmo Fl.: 5032080; R.: 5032020<br />
Nr. 125-528 E 2) 180 x 8 x 22 x 7 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-531 140 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Osmo 71/70<br />
Nr. 125-531 E 2) 180 x 8 x 24 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-532 140 x 8 x 24 x 5 x 2 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Coopre Fl.: SB 210; R.: SB 100<br />
Nr. 125-532 E 2) 180 x 8 x 24 x 5 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-533 ersetzt durch Nr. 125-978<br />
Nr. 125-535 140 x 8 x 24 x 12 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> KBE, Alphacan System Master und Alphacan Fersina<br />
Nr. 125-535 E 2) 180 x 8 x 24 x 12 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-536 140 x 6 x 24 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Deceuninck Fl.: 806; R.: 852<br />
Nr. 125-536 E 2) 180 x 6 x 24 x 11 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-542 140 x 6 x 20 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> F.A.L und Actual<br />
Nr. 125-542 E 2) 180 x 6 x 24 x 6 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-547 140 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Inefa<br />
Nr. 125-547 E 1) 180 x 8 x 28 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
125-524<br />
bis<br />
125-547<br />
125-525 E<br />
bis<br />
125-547 E<br />
E 8
Fallen-Schließbleche <strong>für</strong> Profilsysteme<br />
U-Profil-Schließbleche<br />
Nr. 125-549 140 x 6 x 24 x 6 x 2 mm, mit Endkappen, Anschraublöcher versetzt,<br />
passend <strong>für</strong> Vekaplast<br />
Nr. 125-549 E 2) 180 x 6 x 24 x 6 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-550 140 x 8 x 28 x 8 x 2 mm, mit Guss-Endkappen,<br />
passend <strong>für</strong> Trocal Serie 900 Fl.: 920500 (TF 925);<br />
R.: 910100 (TF 911), Stegmaß 6,5 mm<br />
Nr. 125-550 E 1) 180 x 8 x 28 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-550-3 wie Nr. 125-550, jedoch Stegmaß 7 mm<br />
Nr. 125-550-3 E 1) 180 x 8 x 28 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-555 140 x 6 x 24 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Brügmann Fl.: HT 020; R.: HT 010<br />
Nr. 125-555 E 2) 180 x 6 x 24 x 6 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-557-01 140 x 6 x 20 x 6 x 2 mm, mit von hinten verstellbaren<br />
Führungsbolzen und Endkappen, passend <strong>für</strong> Rehau Fl.: 549050; R.:<br />
549110<br />
Nr. 125-557-01 E 2) 180 x 6 x 22 x 6 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-558 140 x 6 x 24 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Deceuninck Fl.: 855; R.: 852<br />
Nr. 125-558 E 1) 180 x 6 x 28 x 11 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-559 140 x 8 x 24 x 13 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Salamander Fl.: 301040 (TF 13); R.: 200020 (UR 2)<br />
Nr. 125-559 E 2) 180 x 8 x 24 x 13 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-560 140 x 8 x 24 x 13 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Salamander Fl.: 201040 (UF 4); R.: 200020 (UR 2)<br />
Nr. 125-560 E 2) 180 x 8 x 24 x 13 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-563 140 x 6 x 22 x 6 x 2 mm, mit Guss-Endkappen,<br />
passend <strong>für</strong> Osmo Fl.: 2018; R.: 2017<br />
Nr. 125-563 E 2) 180 x 6 x 22 x 6 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-569 140 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Pural Fl.: P 006; R.: P 002<br />
Nr. 125-569 E 1) 180 x 8 x 28 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
125-549<br />
bis<br />
125-569<br />
125-549 E<br />
bis<br />
125-569 E<br />
E 9
Fallen-Schließbleche <strong>für</strong> Profilsysteme<br />
U-Profil-Schließbleche<br />
Nr. 125-569-2 140 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Pural Fl.: P 022 (alt); R.: P 002<br />
Nr. 125-569-2 E 1) 180 x 8 x 28 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-569-3 140 x 6 x 28 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Pural Fl.: P 022; R.: P 002<br />
Nr. 125-569-3 E 2) 180 x 6 x 28 x 6 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-573 140 x 8 x 20 x 15 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Deceuninck Fl.: 855; R.: 801<br />
Nr. 125-573 E 1) 180 x 8 x 28 x 15 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-575 140 x 6 x 28 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Helmitin Fl.: 4-60087; R.: 4-60059<br />
Nr. 125-575 E 1) 180 x 6 x 28 x 9 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-582 140 x 6 x 30 x 14 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Spectus Fl.: SW 07; R.: SW 05<br />
Nr. 125-582 E 1) 180 x 6 x 30 x 14 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-585 140 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Aluplast und Gealan<br />
Nr. 125-585 E 1) 180 x 8 x 30 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-587 140 x 6 x 28 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Gromathic Fl.: GM 2601; R.: GM 2408<br />
Nr. 125-587 E 1) 180 x 6 x 28 x 10 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-588 140 x 6 x 28 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Helmitin Fl.: 60087; R.: 60111<br />
Nr. 125-588 E 2) 180 x 6 x 28 x 11 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-588-2 wie Nr. 125-722, jedoch 140 x 6 x 28 x 11 x 2 mm,<br />
Anschraublöcher versetzt, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Helmitin Fl.: 4-60193; R.: 4-60180<br />
Nr. 125-588-2 E 1) 180 x 6 x 28 x 11 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-589 140 x 7 x 28 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Duraflex Fl.: TD 1801; R.: TD 1802<br />
Nr. 125-589 E 1) 180 x 7 x 28 x 9 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
125-569-2<br />
bis<br />
125-589<br />
125-569-2 E<br />
bis<br />
125-589 E<br />
E 10
Fallen-Schließbleche <strong>für</strong> Profilsysteme<br />
U-Profil-Schließbleche<br />
Nr. 125-590 140 x 5 x 24 x 10 x 2 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Kömmerling Fl.: SP 1232; R.: SP 1249<br />
Nr. 125-590 E 1) 180 x 5 x 28 x 11 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-592 140 x 6 x 30 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Roplasto Fl.: 629800; R.: 611400<br />
Nr. 125-592 E 1) 180 x 6 x 26 x 11 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-594 140 x 6 x 22 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Coopre Fl.: GB 202; R.: GB 102<br />
Nr. 125-594 E 2) 180 x 6 x 22 x 6 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-597 140 x 8 x 26 x 13 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Alphacan System Master Fl.: TIO 02; R.: ELA 02<br />
Nr. 125-597 E 1) 180 x 8 x 26 x 13 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-702 140 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Thyssen Fl.: ZM 3-0164; R.: LM 10-0108<br />
Nr. 125-702 E 2) 180 x 8 x 24 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-703 140 x 6 x 24 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Thyssen Fl.: H5-9070; R.: L3-0155<br />
Nr. 125-703 E 2) 180 x 6 x 24 x 6 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-706 140 x 6 x 26 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Osmo Fl.: 2195; R.: 2171<br />
Nr. 125-706 E 1) 180 x 6 x 26 x 6 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-707 140 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Plastival Fl.: R 7012; R.: R 7000<br />
Nr. 125-707 E 1) 180 x 8 x 28 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-708 140 x 6 x 20 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Veka Fl.: 103.047; R.: 101.041<br />
Nr. 125-708 E 1) 180 x 6 x 28 x 6 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-709 140 x 10 x 28 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Actual Fl.: P 1409; R.: 1402<br />
Nr. 125-709 E 1) 180 x 10 x 28 x 10 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
125-590<br />
bis<br />
125-709<br />
125-590 E<br />
bis<br />
125-709 E<br />
E 11
Fallen-Schließbleche <strong>für</strong> Profilsysteme<br />
U-Profil-Schließbleche<br />
Nr. 125-713 140 x 8 x 32 x 13 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Alphacan Fersina Fl.: POR; R.: ELA<br />
Nr. 125-713 E 1) 180 x 8 x 32 x 13 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-717 140 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Alphacan Profilia und Alphacan Fersina<br />
Nr. 125-717 E 1) 180 x 8 x 30 x 13 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-718 140 x 8 x 24 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Alphacan Profilia Fl.: PK 193; R.: PF 089<br />
Nr. 125-718 E 1) 180 x 8 x 32 x 10 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-721 140 x 6 x 28 x 14 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> LB-Profile Fl.: Z 5; R.: T 7<br />
Nr. 125-721 E 1) 180 x 6 x 28 x 14 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-722 wie Nr. 125-588-2, jedoch 140 x 8 x 28 x 13 x 2 mm,<br />
mit Führungsbolzen und Endkappen, Anschraublöcher versetzt,<br />
passend <strong>für</strong> Helmitin Fl.: 4-60193; R.: 4-60180<br />
Nr. 125-722 E 1) 180 x 8 x 28 x 13 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-731-1 140 x 6 x 30 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Profile 22 Fl.: 2230; R.: 2207<br />
Nr. 125-731-1 E 1) 180 x 6 x 32 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-733 140 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Plastival, Aluplast, Komarek, Primo, Rehau und Osmo,<br />
Stegmaß 5 mm<br />
Nr. 125-733 E 1) 180 x 8 x 28 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-733-2 wie Nr. 125-733, jedoch 140 x 8 x 28 x 8 x 2 mm,<br />
Stegmaß 7 mm<br />
Nr. 125-733-2 E 1) 180 x 8 x 28 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-735 140 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Aluplast Fl.: 100038; R.: 100027<br />
Nr. 125-735 E 1) 180 x 8 x 28 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
125-713<br />
bis<br />
125-735<br />
125-713 E<br />
bis<br />
125-735 E<br />
E 12
Fallen-Schließbleche <strong>für</strong> Profilsysteme<br />
U-Profil-Schließbleche<br />
Nr. 125-736 140 x 6 x 20 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Dimat Fl.: 621; R.: 610-3<br />
Nr. 125-736 E 1) 180 x 6 x 28 x 6 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-744 140 x 6 x 20 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Gromathic Fl.: GM 3005; R.: GM 3008<br />
Nr. 125-744 E 1) 180 x 6 x 28 x 6 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-755 140 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Komarek VI Fl.: FBI 163; R.: FBA 044<br />
Nr. 125-755 E 1) 180 x 8 x 26 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-757 140 x 8 x 30 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> ACCORD System 503<br />
Nr. 125-757 E 1) 180 x 8 x 30 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-758 140 x 8 x 24 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Vekaplast<br />
Nr. 125-758 E 2) 180 x 8 x 24 x 11 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-762 140 x 10 x 22 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Rehau Fl.: 560220; R.: 560490<br />
Nr. 125-762 E 1) 180 x 10 x 26 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-763 140 x 8 x 24 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> KBE Fl.: 112; R.: 102<br />
Nr. 125-763 E 1) 180 x 8 x 26 x 10 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-764 140 x 6 x 24 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Kömmerling und Plus Plan<br />
Nr. 125-764 E 1) 180 x 6 x 32 x 9 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-767 140 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> ACCORD Fl.: 900.222; R.: 503.601<br />
Nr. 125-767 E 1) 180 x 8 x 28 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-767-2 140 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Actual Fl.: 1508; R.: 1501<br />
Nr. 125-767-2 E 2) 180 x 8 x 28 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
125-736<br />
bis<br />
125-767-2<br />
125-736 E<br />
bis<br />
125-767-2 E<br />
E 13
Fallen-Schließbleche <strong>für</strong> Profilsysteme<br />
U-Profil-Schließbleche<br />
Nr. 125-767-3 140 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Actual Fl.: 1515; R.: 1501<br />
Nr. 125-767-3 E 1) 180 x 8 x 28 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-788 140 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> KBE, Lucobay, Spectus, Deceuninck und Stöckel<br />
Nr. 125-788 E 1) 180 x 8 x 28 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-788-1 140 x 8 x 28 x 4 x 2 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> KBE Fl.: 714; R.: 134<br />
Nr. 125-788-1 E 1) 180 x 8 x 28 x 4 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-799 wie Nr. 125-706, jedoch 140 x 8 x 26 x 8 x 2 mm,<br />
mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Osmo Fl.: 2195; R.: 2171<br />
Nr. 125-799 E 1) 180 x 8 x 26 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-801 140 x 8 x 26 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Thyssen Fl.: H 4-9060; R.: L 3-0155<br />
Nr. 125-801 E 1) 180 x 8 x 28 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-802 140 x 10 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Actual System 300<br />
Nr. 125-802 E 1) 180 x 10 x 28 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-818 wie Nr. 125-881, jedoch 140 x 8 x 28 x 13 x 2 mm,<br />
mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Kömmerling Eurodur 3S, Stegmaß 7 mm<br />
Nr. 125-818 E 1) 180 x 8 x 28 x 13 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-818-3 wie Nr. 125-818, jedoch Stegmaß 6 mm<br />
Nr. 125-818-3 E 1) 180 x 8 x 28 x 13 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-818-5 wie Nr. 125-818, jedoch 140 x 8 x 32 x 13 x 2 mm,<br />
mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Primo FL.: 3338; R.: 3360<br />
Nr. 125-818-5 E 1) 180 x 8 x 32 x 13 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner, Rs oder Ls<br />
Nr. 125-821 140 x 8 x 32 x 12 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Marshall Tufflex Fl.: V 21-HS; R.: F 21-57<br />
Nr. 125-821 E 1) 180 x 8 x 32 x 12 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-847 140 x 6 x 30 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Plus Plan Fl.: FLR 120 E; R.: BLR 80 ED<br />
Nr. 125-847 E 1) 180 x 6 x 30 x 9 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
125-767-3<br />
bis<br />
125-847<br />
125-767-3 E<br />
bis<br />
125-847 E<br />
E 14
Fallen-Schließbleche <strong>für</strong> Profilsysteme<br />
U-Profil-Schließbleche<br />
Nr. 125-852 140 x 8 x 24 x 15 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Deceuninck Fl.: 1707; R.: 1703<br />
Nr. 125-852 E 3) 180 x 8 x 24 x 15 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-853 140 x 6 x 28 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> LB-Profile und ACCORD<br />
Nr. 125-853 E 1) 180 x 6 x 28 x 9 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-857 140 x 6 x 28 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Kömmerling Eurodur Gold Fl.: 1472; R.: 1461<br />
Nr. 125-857 E 1) 180 x 6 x 28 x 10 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-862 140 x 6 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> KBE Fl.: 714; R.: 112<br />
Nr. 125-862 E 1) 180 x 6 x 28 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-867 140 x 8 x 28 x 15 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Wymar Fl.: 2217; R.: 2003<br />
Nr. 125-867 E 1) 180 x 8 x 28 x 15 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-870 140 x 8 x 20 x 8 x 2 mm,<br />
mit von hinten verstellbaren Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Roplasto, Actual, Wymar und Scanorama<br />
Nr. 125-870 E 2) 180 x 8 x 22 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-873 140 x 6 x 28 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Vekaplast und Eurofen<br />
Nr. 125-873 E 1) 180 x 6 x 28 x 9 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-881 wie Nr. 125-818, jedoch 140 x 6 x 28 x 11 x 2 mm,<br />
mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Kömmerling Eurodur 3 S Fl.: 1416; R.: 1402<br />
Nr. 125-881 E 1) 180 x 6 x 28 x 11 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-883 140 x 8 x 28 x 14 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Brügmann Fl.: HF 954; R.: HF 962<br />
Nr. 125-883 E 1) 180 x 8 x 28 x 14 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-886 140 x 6 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Rehau Fl.: 551060; R.: 551080<br />
Nr. 125-886 E 1) 180 x 6 x 28 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
125-852<br />
bis<br />
125-886<br />
125-852 E<br />
bis<br />
125-886 E<br />
E 15
Fallen-Schließbleche <strong>für</strong> Profilsysteme<br />
U-Profil-Schließbleche<br />
Nr. 125-891 140 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Salamander Fl.: 201040 (UF 4); R.: 206020 (US 2)<br />
Nr. 125-891 E 1) 180 x 8 x 28 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-898 140 x 8 x 28 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Eurofen Fl.: ZP 120; R.: L 65<br />
Nr. 125-898 E 1) 180 x 8 x 28 x 11 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-900 140 x 6 x 26 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Alphacan, Deceuninck und Thyssen<br />
Nr. 125-900 E 1) 180 x 6 x 26 x 6 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-906 140 x 7 x 28 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Salamander Fl.: 301040; R.: 206030<br />
Nr. 125-906 E 1) 180 x 7 x 28 x 10 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-907 140 x 6 x 28 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Deceuninck Fl.: 1807; R.: 1801<br />
Nr. 125-907 E 1) 180 x 6 x 28 x 10 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-910 140 x 7 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Status System Fl.: 907; R.: 904<br />
Nr. 125-910 E 1) 180 x 7 x 28 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-912 140 x 6 x 28 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Plastmo Fl.: 6035035; R.: 6035025<br />
Nr. 125-912 E 1) 180 x 6 x 28 x 9 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-915 140 x 6 x 32 x 10,5 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Rehau Serie 730 und Osmo Comtess S,<br />
Anschraublöcher versetzt, Maß von Außenkante Anschlagschenkel<br />
bis Mitte Schraubloch 24 mm<br />
Nr. 125-915 E 1) 180 x 6 x 32 x 10,5 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-915-1 wie Nr. 125-915, jedoch Anschraublöcher versetzt,<br />
Maß von Außenkante Anschlagschenkel bis Mitte Schraubloch 8 mm<br />
Nr. 125-915-1 E 1) 180 x 6 x 32 x 10,5 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-916 140 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Knipping 3000 Fl.: SK 3055; R.: SK 3022<br />
Nr. 125-916 E 3) 180 x 8 x 24 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
125-891<br />
bis<br />
125-916<br />
125-891 E<br />
bis<br />
125-916 E<br />
E 16
Fallen-Schließbleche <strong>für</strong> Profilsysteme<br />
U-Profil-Schließbleche<br />
Nr. 125-919 140 x 8 x 32 x 12 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Thyssen Fl.: H 40-9090; R.: L 60-0166<br />
Nr. 125-919 E 1) 180 x 8 x 32 x 12 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-919-01 wie Nr. 125-919, jedoch mit von hinten verstellbaren Führungsbolzen<br />
und Endkappen<br />
Nr. 125-919-01 E 1) 180 x 8 x 32 x 12 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-919-2 140 x 8 x 32 x 13 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Thyssen Fl.: H 3/13-9055; R.: L 6-0144<br />
Nr. 125-919-2 E 1) 180 x 8 x 32 x 13 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-926 140 x 8 x 26 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Actual Fl.: PA 1416; R.: PA 1402<br />
Nr. 125-926 E 1) 180 x 8 x 26 x 11 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-927 140 x 8 x 26 x 12,5 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Alphacan Profilia Fl.: PE 613; R.: PE 601<br />
Nr. 125-927 E 1) 180 x 8 x 26 x 12,5 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-939 140 x 8 x 28 x 15 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Lucobay Fl.: 53-08; R.: 53-21<br />
Nr. 125-939 E 1) 180 x 8 x 28 x 15 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-940 140 x 6 x 26 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Actual Fl.: P 1508; R.: P 1501<br />
Nr. 125-940 E 1) 180 x 6 x 26 x 6 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-941 140 x 8 x 28 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Aluplast und ACCORD<br />
Nr. 125-941 E 1) 180 x 8 x 28 x 11 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-945 140 x 8 x 32 x 12 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Plus Plan Fl.: FR 99 V; R.: BR 76<br />
Nr. 125-945 E 1) 180 x 8 x 32 x 12 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-947 140 x 8 x 28 x 12 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Rehau Fl.: 546210; R.: 546180<br />
Nr. 125-947 E 1) 180 x 8 x 28 x 12 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
125-919<br />
bis<br />
125-947<br />
125-919 E<br />
bis<br />
125-947 E<br />
E 17
Fallen-Schließbleche <strong>für</strong> Profilsysteme<br />
U-Profil-Schließbleche<br />
Nr. 125-948 140 x 8 x 32 x 12 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Gealan Fl.: 3076; R.: 3008<br />
Nr. 125-948 E 1) 180 x 8 x 32 x 12 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-954 140 x 8 x 32 x 15 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Explast Fl.: E 612; R.: E 600<br />
Nr. 125-954 E 1) 180 x 8 x 32 x 15 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-958 140 x 6 x 32 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Actual Fl.: 6031; R.: 6028<br />
Nr. 125-958 E 1) 180 x 6 x 32 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-963 140 x 8 x 30 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> ISO 60 Fl.: ISO 17; R.: ISO 1<br />
Nr. 125-963 E 1) 180 x 8 x 30 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-964 140 x 8 x 32 x 15 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Stöckel Eco Step Fl.: 2262; R.: 2113<br />
Nr. 125-964 E 1) 180 x 8 x 32 x 15 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-966 140 x 6 x 28 x 13,5 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Deceuninck Serie Mondiale Fl.: 2021; R.: 2410<br />
Nr. 125-966 E 1) 180 x 6 x 28 x 13,5 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-967 140 x 8 x 32 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Veka Matrix Fl.: 105.163; R.: 101.113<br />
Nr. 125-967 E 1) 180 x 8 x 32 x 11 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-968 140 x 8 x 32 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Veka Matrix Fl.: 103.169; R.: 101.113<br />
Nr. 125-968 E 1) 180 x 8 x 32 x 11 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-971 140 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> ACCORD Fl.: 503.629; R.: 503.601<br />
Nr. 125-971 E 1) 180 x 8 x 28 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
125-948<br />
bis<br />
125-971<br />
125-948 E<br />
bis<br />
125-971 E<br />
E 18
Fallen-Schließbleche <strong>für</strong> Profilsysteme<br />
U-Profil-Schließbleche<br />
Nr. 125-971-1 wie Nr. 125-971, jedoch 140 x 8 x 26 x 8 x 2 mm,<br />
passend <strong>für</strong> ACCORD Fl.: AP 005; R.: AP 001<br />
Nr. 125-971-1 E 1) 180 x 8 x 26 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-978 140 x 8 x 28 x 13 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Kömmerling-Tritec<br />
Nr. 125-978 E 1) 180 x 8 x 28 x 13 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-978-1 E wie vor, jedoch mit versetzten Anschraublöchern im E-Öffner-Bereich<br />
Nr. 125-983 140 x 8 x 28 x 12 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Aluplast Fl.: GM 1530; R.: GR 1501<br />
Nr. 125-983 E 1) 180 x 8 x 28 x 12 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-985 140 x 8 x 32 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Veka Matrix Fl.: 105.165; R.: 101.108<br />
Nr. 125-985 E 1) 180 x 8 x 32 x 10 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-987 140 x 8 x 28 x 16 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Plastival Fl.: F 003; R.: F 006<br />
Nr. 125-987 E 1) 180 x 8 x 28 x 16 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-990 140 x 8 x 32 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Spectus Fl.: SW 709; R.: SW 705<br />
Nr. 125-991 140 x 6 x 30 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Profile 22 Fl.: 2235; R.: 2238<br />
Nr. 125-991 E 2) 180 x 6 x 30 x 10 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-997 140 x 8 x 26 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Trocal Fl.: 120200; R.: 110100<br />
Nr. 125-997 E 1) 180 x 8 x 26 x 11 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Nr. 125-999 140 x 8 x 32 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Rehau Fl.: 541170; R.: 514029<br />
Nr. 125-999 E 1) 180 x 8 x 32 x 8 x 2 mm, sonst wie vor,<br />
jedoch mit Lochung <strong>für</strong> E-Öffner<br />
Erklärungen <strong>für</strong> Hochzahlen auf Seite i 7<br />
125-971-1<br />
bis<br />
125-999<br />
125-971-1 E<br />
bis<br />
125-999 E<br />
E 19
Profilsysteme<br />
F 1- 2<br />
F 3-12<br />
F 13-21<br />
F 22-30<br />
F 31-33<br />
F 34-35<br />
F 36<br />
Schließkästen und Schließbleche <strong>für</strong> H-Riegel<br />
Schließkästen und Schließbleche <strong>für</strong> Rundbolzen<br />
Schließkästen und Schließbleche <strong>für</strong> Schwenkriegel<br />
Schließkästen und Schließbleche <strong>für</strong> Bolzen-Schwenkriegelkombination<br />
Schließplatten <strong>für</strong> Rollzapfen<br />
Bandseitensicherungen<br />
Schließleisten<br />
F<br />
Hinweise zum Kapitel F umseitig
Profilsysteme<br />
Hinweise zum Kapitel F<br />
Verstellbare Ausführung 1-riegeliger Schließbleche<br />
Diese Zusatz-Ausstattung – siehe auch Hinweise Kapitel H – er<strong>for</strong>dert bei einigen Schließblechen gegenüber den Standard-<br />
Abmessungen abweichende Breiten- und/oder Längenmaße. Die Passfähigkeit ist selbstverständlich trotz der Maßänderungen<br />
gewährleistet.<br />
Bei Auftragserteilung von verstellbaren Schließblechen <strong>für</strong> Zusatzschlösser ist hinter der Artikel-Nr. die festgelegte Kennzeichnung<br />
<strong>für</strong> die gewünschte Ausführung anzugeben, z. B.<br />
Nr. 2325...... V = Andruck regulierbar durch Exzenterdorn;<br />
Nr. 2325...... G = Andruck regulierbar durch verstellbaren Gusskasten
Profilsysteme Schließkästen und Schließbleche <strong>für</strong> H-Riegel<br />
Schließkästen<br />
Nr. 2001-06-18 Stulp 100 x 18 x 6 mm, käntig,<br />
Kastenstärke 12 mm, Andruck regulierbar<br />
Nr. 2001-06-20 wie vor, jedoch Stulp 100 x 20 x 6 mm, käntig<br />
Nr. 2001-06-24 wie vor, jedoch Stulp 100 x 24 x 6 mm, käntig<br />
Nr. 2000-02-20 wie vor, jedoch Stulp 100 x 20 x 2 mm, käntig,<br />
Kastenstärke 18 mm<br />
Nr. 2000-02-24 wie vor, jedoch Stulp 100 x 24 x 2 mm, käntig,<br />
Kastenstärke 18 mm<br />
Nr. 2000-02-24 R wie vor, jedoch Stulp 100 x 24 x 2 mm, abgerundet,<br />
Kastenstärke 18 mm<br />
Nr. 2000-06-24 wie vor, jedoch Stulp 100 x 24 x 6 mm, käntig,<br />
Kastenstärke 12 mm<br />
Nr. 2000-606 wie vor, jedoch Stulp 100 x 19 x 6 mm, käntig,<br />
Kastenstärke 12 mm, <strong>für</strong> Profil Actual/FAL<br />
Unterlegplatten<br />
Nr. 2000-10-18 100 x 18 x 2 mm, <strong>für</strong> Schließkästen mit 12 mm Kastenstärke<br />
Nr. 2000-10-20 100 x 20 x 2 mm, <strong>für</strong> Schließkästen mit 12 mm Kastenstärke<br />
Nr. 2000-10-24 100 x 24 x 2 mm, <strong>für</strong> Schließkästen mit 12 mm Kastenstärke<br />
Nr. 2000-11-20 100 x 20 x 2 mm, <strong>für</strong> Schließkästen mit 18 mm Kastenstärke<br />
Nr. 2000-11-24 100 x 24 x 2 mm, <strong>für</strong> Schließkästen mit 18 mm Kastenstärke<br />
2001-06-18<br />
2001-06-20<br />
2001-06-24<br />
2000-06-24<br />
2000-606<br />
2000-10-18<br />
bis<br />
2000-11-24<br />
2000-02-20<br />
2000-02-24<br />
F 1
Profilsysteme Schließkästen und Schließbleche <strong>für</strong> H-Riegel<br />
Flach-Schließbleche<br />
Nr. 2130-03-18 140 x 18 x 3 mm, käntig<br />
Nr. 2130-03-20 140 x 20 x 3 mm, käntig<br />
Nr. 2130-03-22 140 x 22 x 3 mm, käntig<br />
Nr. 2130-03-24 140 x 24 x 3 mm, käntig<br />
Nr. 2130-03-28 140 x 28 x 3 mm, käntig<br />
U-Profil-Schließbleche<br />
Nr. 2125-06-18 140 x 6 x 18 x 6 x 2 mm<br />
Nr. 2125-08-18 140 x 8 x 18 x 8 x 2 mm<br />
Nr. 2125-06-20 140 x 6 x 20 x 6 x 2 mm, mit Endkappen<br />
Nr. 2125-08-20 140 x 8 x 20 x 8 x 2 mm, mit Endkappen<br />
Nr. 2125-10-20 140 x 10 x 20 x 10 x 2 mm, mit Endkappen<br />
Nr. 2125-12-20 140 x 12 x 20 x 12 x 2 mm, mit Endkappen<br />
Nr. 2125-06-22 140 x 6 x 22 x 6 x 2 mm, mit Endkappen<br />
Nr. 2125-08-22 140 x 8 x 22 x 8 x 2 mm, mit Endkappen<br />
Nr. 2125-10-22 140 x 10 x 22 x 10 x 2 mm, mit Endkappen<br />
Nr. 2125-06-24 140 x 6 x 24 x 6 x 2 mm, mit Endkappen<br />
Nr. 2125-08-24 140 x 8 x 24 x 8 x 2 mm, mit Endkappen<br />
Nr. 2125-10-24 140 x 10 x 24 x 10 x 2 mm, mit Endkappen<br />
Nr. 2125-10-24-1 140 x 10 x 24 x 10 x 2 mm, mit Endkappen,<br />
passend <strong>für</strong> Rehau Serie 707<br />
Nr. 2125-12-24 140 x 12 x 24 x 12 x 2 mm, mit Endkappen<br />
Nr. 2125-06-26 140 x 6 x 26 x 6 x 2 mm, mit Endkappen<br />
Nr. 2125-08-26 140 x 8 x 26 x 8 x 2 mm, mit Endkappen<br />
Nr. 2125-10-26 140 x 10 x 26 x 10 x 2 mm, mit Endkappen<br />
Nr. 2125-06-28 140 x 6 x 28 x 6 x 2 mm, mit Endkappen<br />
Nr. 2125-08-28 140 x 8 x 28 x 8 x 2 mm, mit Endkappen<br />
Nr. 2125-10-28 140 x 10 x 28 x 10 x 2 mm, mit Endkappen<br />
Nr. 2125-06-30 140 x 6 x 30 x 6 x 2 mm, mit Endkappen<br />
Nr. 2125-08-30 140 x 8 x 30 x 8 x 2 mm, mit Endkappen<br />
Nr. 2125-10-30 140 x 10 x 30 x 10 x 2 mm, mit Endkappen<br />
2130-03-18<br />
bis<br />
2130-03-28<br />
2125-06-18<br />
bis<br />
2125-10-30<br />
F 2
Profilsysteme Schließkästen und Schließbleche <strong>für</strong> Rundbolzen<br />
Schließkästen<br />
Nr. 2300-06-20 R Stulp 100 x 20 x 6 mm, abgerundet,<br />
Kastenstärke 16 mm, Andruck regulierbar,<br />
Nr. 2300-08-20-1 R Stulp 138 x 20 x 8,5 mm, abgerundet,<br />
Kastenstärke 14,5 mm, mit Wendeplatte,<br />
Andruck regulierbar<br />
Nr. 2301-06-18 Stulp 100 x 18 x 6 mm, käntig, Kastenstärke 12 mm,<br />
Andruck regulierbar<br />
Nr. 2301-06-20 wie vor, jedoch Stulp 100 x 20 x 6 mm, käntig<br />
Nr. 2301-06-20 R wie vor, jedoch Stulp 100 x 20 x 6 mm, abgerundet<br />
Nr. 2301-06-24 wie vor, jedoch Stulp 100 x 24 x 6 mm, käntig<br />
Flach-Schließbleche<br />
Nr. 2330-03-18 100 x 18 x 3 mm, käntig<br />
Nr. 2330-03-18 R wie vor, jedoch abgerundet<br />
Nr. 2330-03-20 100 x 20 x 3 mm, käntig<br />
Nr. 2330-03-20 R wie vor, jedoch abgerundet<br />
Nr. 2330-03-22 100 x 22 x 3 mm, käntig<br />
Nr. 2330-03-24 100 x 24 x 3 mm, käntig<br />
Nr. 2330-03-24 R wie vor, jedoch abgerundet<br />
Nr. 2330-03-28 100 x 28 x 3 mm, käntig<br />
Nr. 2330-532 140 x 32 x 3 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Brügmann Fl.: HT 022; R.: HT 013<br />
Nr. 2330-572 140 x 32 x 3 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Veka Fl.: 105.181; R.: 102.118<br />
2300-06-20 R 2300-08-20-1 R<br />
2301-06-18<br />
2301-06-20<br />
2301-06-24<br />
2330-03-18<br />
bis<br />
2330-03-28<br />
2301-06-20 R<br />
2330-532<br />
2330-572<br />
F 3
Profilsysteme Schließkästen und Schließbleche <strong>für</strong> Rundbolzen<br />
Winkel-Schließbleche<br />
Nr. 2320-502 140 x 23 x 11 x 3 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Kömmerling bei Fortfall der Füll-Leiste, Stegmaß 5,5 mm<br />
Nr. 2320-502-1 wie vor, jedoch Stegmaß 4,3 mm<br />
Nr. 2320-502-4 wie Nr. 2320-502, jedoch 140 x 28 x 11 x 3 mm, Stegmaß 6,8 mm<br />
Nr. 2320-502-6 140 x 28 x 11 x 3 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Kömmerling Fl.: 3051; R.: 3012<br />
Nr. 2320-520 140 x 34 x 7 x 3 mm, passend <strong>für</strong> Helling Fl.: 7130; R.: BI 6740<br />
Nr. 2320-531 140 x 32 x 6 x 3 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Veka Fl.: 105.081; R.: 101.086, Stegmaß 9,3 mm<br />
Nr. 2320-531-1 wie vor, jedoch Stegmaß 8 mm<br />
Nr. 2320-531-2 wie Nr. 2320-531, jedoch Stegmaß 10,5 mm<br />
Nr. 2320-531-4 wie Nr. 2320-531, jedoch Anschraublöcher versetzt<br />
Nr. 2320-563 140 x 32 x 7 x 3 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Gromathic Fl.: GM 3121; R.: GM 3128<br />
Nr. 2320-570 140 x 32 x 7 x 3 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> KBE Profil in Verbindung mit U-Stulp-Verschluss<br />
Nr. 2320-591 140 x 30 x 8 x 3 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Trocal Innonova 70, Fl.: 522.400; R.: 510.200<br />
U-Profil-Schließbleche<br />
Nr. 2325-06-18 140 x 6 x 18 x 6 x 2 mm<br />
Nr. 2325-08-18 140 x 8 x 18 x 8 x 2 mm<br />
Nr. 2325-06-20 140 x 6 x 20 x 6 x 2 mm, mit Endkappen<br />
Nr. 2325-08-20 140 x 8 x 20 x 8 x 2 mm, mit Endkappen<br />
Nr. 2325-10-20 140 x 10 x 20 x 10 x 2 mm, mit Endkappen<br />
Nr. 2325-12-20 140 x 12 x 20 x 12 x 2 mm, mit Endkappen<br />
Nr. 2325-06-22 140 x 6 x 22 x 6 x 2 mm, mit Endkappen<br />
Nr. 2325-08-22 140 x 8 x 22 x 8 x 2 mm, mit Endkappen<br />
Nr. 2325-10-22 140 x 10 x 22 x 10 x 2 mm, mit Endkappen<br />
Nr. 2325-06-24 140 x 6 x 24 x 6 x 2 mm, mit Endkappen<br />
Nr. 2325-08-24 140 x 8 x 24 x 8 x 2 mm, mit Endkappen<br />
Nr. 2325-10-24 140 x 10 x 24 x 10 x 2 mm, mit Endkappen<br />
Nr. 2325-10-24-1 140 x 10 x 24 x 10 x 2 mm, mit Endkappen,<br />
passend <strong>für</strong> Rehau Serie 707<br />
2320-502<br />
bis<br />
2320-591<br />
2325-06-18<br />
bis<br />
2325-10-24-1<br />
F 4
Profilsysteme Schließkästen und Schließbleche <strong>für</strong> Rundbolzen<br />
U-Profil-Schließbleche<br />
Nr. 2325-12-24 140 x 12 x 24 x 12 x 2 mm, mit Endkappen<br />
Nr. 2325-06-26 140 x 6 x 26 x 6 x 2 mm, mit Endkappen<br />
Nr. 2325-08-26 140 x 8 x 26 x 8 x 2 mm, mit Endkappen<br />
Nr. 2325-10-26 140 x 10 x 26 x 10 x 2 mm, mit Endkappen<br />
Nr. 2325-06-28 140 x 6 x 28 x 6 x 2 mm, mit Endkappen<br />
Nr. 2325-08-28 140 x 8 x 28 x 8 x 2 mm, mit Endkappen<br />
Nr. 2325-10-28 140 x 10 x 28 x 10 x 2 mm, mit Endkappen<br />
Nr. 2325-06-30 140 x 6 x 30 x 6 x 2 mm, mit Endkappen<br />
Nr. 2325-08-30 140 x 8 x 30 x 8 x 2 mm, mit Endkappen<br />
Nr. 2325-10-30 140 x 10 x 30 x 10 x 2 mm, mit Endkappen<br />
Nr. 2325-112 140 x 6 x 32 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
als Variante zu Nr. 2320-531,<br />
passend <strong>für</strong> Veka Fl.: 105.081; R.: 101.085<br />
Nr. 2325-113 140 x 6 x 22 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Osmo Compress S Fl.: 2615; R.: 2602<br />
Nr. 2325-114 140 x 6 x 32 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Finstral Fl.: D 530; R.: D 533<br />
Nr. 2325-116 140 x 6 x 28 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Plastival Fl.: R 7012; R.: R 7000<br />
Nr. 2325-117 140 x 8 x 28 x 12 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Roplasto Fl.: 220400; R.: 210100<br />
Nr. 2325-118 140 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Thyssen Fl.: H4/13-9065; R.: L3-0155<br />
Nr. 2325-120 140 x 8 x 32 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Trocal Fl.: 120200; R.: 111000<br />
Nr. 2325-121 140 x 8 x 32 x 16 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Kömmerling Fl.: 3023; R.: 3012<br />
Nr. 2325-122 140 x 8 x 28 x 14 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Aluplast Fl.: 140031; R.: 140001<br />
Nr. 2325-124 140 x 8 x 26 x 4 x 2 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Stöckel Fl.: 2262; R.: 2302<br />
Nr. 2325-126 140 x 8 x 30 x 8 x 2 mm, passend <strong>für</strong> Exte Fl.: 6002; R.: 6009<br />
Nr. 2325-146 140 x 6 x 32 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Veka Fl.: 103.202; R.: 101.200<br />
Nr. 2325-153 140 x 8 x 32 x 13 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Salamander 3D Fl.: 211240/D4; R.: 110220/DR1<br />
Nr. 2325-153-1 140 x 8 x 32 x 13 x 2 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Salamander, Anschraublöcher auf 22 mm<br />
2325-12-24<br />
bis<br />
2325-10-30<br />
2325-112<br />
bis<br />
2325-153-1<br />
F 5
Profilsysteme Schließkästen und Schließbleche <strong>für</strong> Rundbolzen<br />
U-Profil-Schließbleche<br />
Nr. 2325-501 140 x 6 x 20 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Profen Fl.: AB 105; R.: AS 102<br />
Nr. 2325-501-1 140 x 8 x 22 x 3,3 x 2 mm, mit Guss-Endkappen,<br />
passend <strong>für</strong> Trocal-Serie 900 Fl.: 920300 (TF 923);<br />
R.: 910100 (TF 911)<br />
Nr. 2325-504-6 140 x 6 x 32 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Kömmerling Fl.: SP 1416; R.: SP 1441<br />
Nr. 2325-505 140 x 8 x 18 x 8 x 2 mm, mit Guss-Endkappen,<br />
passend <strong>für</strong> Fulgurit Fl.: Isopur FL 95; R.: Isopur BL 68<br />
Nr. 2325-506 140 x 7 x 20 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Tehalit, Brügmann-Frisoplast Serie 2001,<br />
Roplasto und Thyssen<br />
Nr. 2325-507 140 x 8 x 20 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Rehau Serie 709<br />
Nr. 2325-507-01 140 x 8 x 28 x 14 x 2 mm, sonst wie vor,<br />
jedoch mit von hinten verstellbaren Führungsbolzen und Endkappen<br />
Nr. 2325-508 140 x 6,5 x 20 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Veka Fl.: 105.014; R.: 101.019<br />
Nr. 2325-509 140 x 6,5 x 20 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Cork Plastics<br />
Nr. 2325-511 140 x 6 x 20 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Stöckel Fl.: 1212; R.: 1111<br />
Nr. 2325-512 140 x 8 x 18 x 8 x 2 mm, mit Guss-Endkappen<br />
passend <strong>für</strong> Isobelec Fl.: GZ 126; R.: D 70<br />
Nr. 2325-518 140 x 7 x 28 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Veka Fl.: 105.013; R.: 101.018<br />
Nr. 2325-519 140 x 8 x 20 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Aluplast Fl.: GF 1030; R.: GR 1000<br />
Nr. 2325-519-3 140 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Aluplast Fl.: GF 1030; R.: GR 1001<br />
Nr. 2325-520 140 x 6 x 22 x 14 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Kömmerling Fl.: 3022; R.: 3012, Stegmaß 5,5 mm<br />
Nr. 2325-520-2 140 x 6 x 28 x 14 x 2 mm, sonst wie vor<br />
Nr. 2325-520-6 ersetzt durch Nr. 2325-966<br />
Nr. 2325-520-9 wie Nr. 2325-520, jedoch Stegmaß 2,5 mm,<br />
passend <strong>für</strong> Kömmerling Fl.: SP 1233; R.: SP 1279<br />
Nr. 2325-522 140 x 6 x 22 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Aluplast Fl.: H 10 S; R.: H 31 M<br />
Nr. 2325-523 140 x 8 x 24 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> LB-Plastic Fl.: SW 7004; R.: SW 7002<br />
Nr. 2325-524 140 x 8 x 20 x 8 x 2 mm, mit Guss-Endkappen, passend <strong>für</strong> Winsol<br />
2325-501<br />
bis<br />
2325-524<br />
F 6
Profilsysteme Schließkästen und Schließbleche <strong>für</strong> Rundbolzen<br />
U-Profil-Schließbleche<br />
Nr. 2325-525 140 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Salamander Fl.: 201040 (UF 4); R.: 200020 (UR 2) mit<br />
SL 68537 beschnitten<br />
Nr. 2325-526 140 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Salamander Fl.: 301040 (TF 13);<br />
R.: 200020 (UR 2) mit SL 68537 beschnitten<br />
Nr. 2325-528 140 x 8 x 22 x 7 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Plastmo Fl.: 5032080; R.: 5032020<br />
Nr. 2325-531 140 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Osmo 71/70<br />
Nr. 2325-532 140 x 8 x 24 x 5 x 2 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Coopre Fl.: SB 210; R.: SB 100<br />
Nr. 2325-533 ersetzt durch Nr. 2325-978<br />
Nr. 2325-535 140 x 8 x 24 x 12 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> KBE, Alphacan System Master und Alphacan Fersina<br />
Nr. 2325-536 140 x 6 x 24 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Deceuninck Fl.: 806; R.: 852<br />
Nr. 2325-542 140 x 6 x 20 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> F.A.L und Actual<br />
Nr. 2325-547 140 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Inefa<br />
Nr. 2325-549 140 x 6 x 24 x 6 x 2 mm, mit Endkappen,<br />
Anschraublöcher versetzt, passend <strong>für</strong> Vekaplast<br />
Nr. 2325-550 140 x 8 x 28 x 8 x 2 mm, mit Guss-Endkappen,<br />
passend <strong>für</strong> Trocal Serie 900 Fl.: 920500 (TF 925);<br />
R.: 910100 (TF 911), Stegmaß 5,5 mm<br />
Nr. 2325-550-3 wie vor, jedoch Stegmaß 7 mm<br />
Nr. 2325-555 140 x 6 x 32 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Brügmann Fl.: HT 020; R.: HT 010<br />
Nr. 2325-557-01 140 x 6 x 20 x 6 x 2 mm, mit von hinten verstellbaren<br />
Führungsbolzen und Endkappen, passend <strong>für</strong> Rehau Fl.: 549050; R.:<br />
549110<br />
Nr. 2325-558 140 x 6 x 24 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Deceuninck Fl.: 855; R.: 852<br />
Nr. 2325-559 140 x 8 x 28 x 14 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Salamander Fl.: 301040 (TF 13); R.: 200020 (UR 2)<br />
Nr. 2325-560 140 x 8 x 28 x 14 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Salamander Fl.: 201040 (UF 4); R.: 200020 (UR 2)<br />
Nr. 2325-563 140 x 6 x 22 x 6 x 2 mm, mit Guss-Endkappen,<br />
passend <strong>für</strong> Osmo Fl.: 2018; R.: 2017<br />
Nr. 2325-569 140 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Pural Fl.: P 006; R.: P 002<br />
2325-525<br />
bis<br />
2325-569<br />
F 7
Profilsysteme Schließkästen und Schließbleche <strong>für</strong> Rundbolzen<br />
U-Profil-Schließbleche<br />
Nr. 2325-569-2 140 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Pural Fl.: P 022 (alt); R.: P 002<br />
Nr. 2325-569-3 140 x 6 x 28 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Pural Fl.: P 022; R.: P 002<br />
Nr. 2325-573 140 x 8 x 20 x 15 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Deceuninck Fl.: 855; R.: 801<br />
Nr. 2325-575 140 x 6 x 28 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Helmitin Fl.: 4-60087; R.: 4-60059<br />
Nr. 2325-582 140 x 6 x 30 x 14 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Spectus Fl.: SW 07; R.: SW 05<br />
Nr. 2325-585 140 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Aluplast und Gealan<br />
Nr. 2325-587 140 x 6 x 28 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Gromathic Fl.: GM 2601; R.: GM 2408<br />
Nr. 2325-588 140 x 6 x 28 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Helmitin Fl.: 60087; R.: 60111<br />
Nr. 2325-588-2 wie Nr. 2325-722, jedoch 140 x 6 x 28 x 11 x 2 mm,<br />
Anschraublöcher versetzt, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Helmitin Fl.: 4-60193; R.: 4-60180<br />
Nr. 2325-589 140 x 7 x 28 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Duraflex Fl.: TD 1801; R.: TD 1802<br />
Nr. 2325-590 140 x 5 x 24 x 10 x 2 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Kömmerling Fl.: SP 1232; R.: SP 1249<br />
Nr. 2325-592 140 x 6 x 22 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Roplasto Fl.: 629800; R.: 611400<br />
Nr. 2325-594 140 x 6 x 22 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Coopre Fl.: GB 202; R.: GB 102<br />
Nr. 2325-597 140 x 8 x 26 x 13 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Alphacan System Master Fl.: TIO 02; R.: ELA 02<br />
Nr. 2325-702 140 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Thyssen Fl.: ZM 3-0164; R.: LM 10-0108<br />
Nr. 2325-703 140 x 6 x 24 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Thyssen Fl.: H5-9070; R.: L3-0155<br />
Nr. 2325-706 140 x 6 x 26 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Osmo Fl.: 2195; R.: 2171<br />
Nr. 2325-707 140 x 8 x 20 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Plastival Fl.: R 7012; R.: R 7000<br />
Nr. 2325-708 140 x 6 x 20 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Veka Fl.: 103.047; R.: 101.041<br />
Nr. 2325-709 140 x 10 x 28 x 10 x 2 mm, mit Führungsbolzen und Endkappen<br />
passend <strong>für</strong> Actual Fl.: P 1409; R.: 1402<br />
2325-569-2<br />
bis<br />
2325-709<br />
F 8
Profilsysteme Schließkästen und Schließbleche <strong>für</strong> Rundbolzen<br />
U-Profil-Schließbleche<br />
Nr. 2325-713 140 x 8 x 28 x 13 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Alphacan Fersina Fl.: POR; R.: ELA<br />
Nr. 2325-717 140 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Alphacan Profilia und Alphacan Fersina<br />
Nr. 2325-718 140 x 8 x 24 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Alphacan Profilia Fl.: PK 193; R.: PF 089<br />
Nr. 2325-721 140 x 6 x 28 x 14 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> LB-Profile Fl.: Z 5; R.: T 7<br />
Nr. 2325-722 wie Nr. 2325-588-2, jedoch 140 x 8 x 28 x 13 x 2 mm,<br />
Anschraublöcher versetzt, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Helmitin Fl.: 4-60193; R.: 4-60180<br />
Nr. 2325-725 180 x 8 x 28 x 11 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Roplasto Fl.: 618502; R.: 619003<br />
Nr. 2325-731-1 140 x 6 x 30 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Profile 22 Fl.: 2230; R.: 2207<br />
Nr. 2325-733 140 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Plastival, Aluplast, Komarek, Primo, Rehau und Osmo,<br />
Stegmaß 4,5 mm<br />
Nr. 2325-733-2 140 x 8 x 28 x 8 x 2 mm, sonst wie vor, jedoch Stegmaß 6,5 mm<br />
Nr. 2325-735 140 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Aluplast Fl.: 100038; R.: 100027<br />
Nr. 2325-736 140 x 6 x 20 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Dimat Fl.: 621; R.: 610-3<br />
Nr. 2325-744 140 x 6 x 20 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Gromathic Fl.: GM 3005; R.: GM 3008<br />
Nr. 2325-755 140 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Komarek VI Fl.: FBI 163; R.: FBA 044<br />
Nr. 2325-757 140 x 8 x 30 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> ACCORD System 503<br />
Nr. 2325-758 140 x 8 x 24 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Vekaplast<br />
Nr. 2325-762 140 x 10 x 22 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Rehau Fl.: 560220; R.: 560490<br />
Nr. 2325-763 140 x 8 x 24 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> KBE Fl.: 112; R.: 102<br />
Nr. 2325-764 140 x 6 x 32 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Kömmerling und Plus Plan<br />
Nr. 2325-767 140 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> ACCORD Fl.: 900.222; R.: 503.601<br />
Nr. 2325-767-2 140 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Actual Fl.: 1508; R.: 1501<br />
2325-713<br />
bis<br />
2325-767-2<br />
F 9
Profilsysteme Schließkästen und Schließbleche <strong>für</strong> Rundbolzen<br />
U-Profil-Schließbleche<br />
Nr. 2325-767-3 140 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Actual Fl.: 1515; R.: 1501<br />
Nr. 2325-788 140 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> KBE, Lucobay, Spectus, Deceuninck und Stöckel<br />
Nr. 2325-788-1 wie vor, jedoch 140 x 8 x 28 x 4 x 2 mm,<br />
mit Führungsbolzen, passend <strong>für</strong> KBE Fl.: 714; R.: 134<br />
Nr. 2325-799 wie Nr. 2325-706, jedoch 140 x 8 x 26 x 8 x 2 mm,<br />
mit Führungsbolzen und Endkappen, passend <strong>für</strong> Osmo<br />
Fl.: 2195; R.: 2171<br />
Nr. 2325-801 140 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Thyssen Fl.: H 4-9060; R.: L 3-0155<br />
Nr. 2325-802 140 x 10 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Actual System 300<br />
Nr. 2325-818 wie Nr. 2325-881, jedoch 140 x 8 x 28 x 13 x 2 mm<br />
mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Kömmerling Eurodur 3S, Stegmaß 6,5 mm<br />
Nr. 2325-818-3 wie vor, jedoch Stegmaß 5,5 mm<br />
Nr. 2325-818-5 wie Nr. 2325-818, jedoch 140 x 8 x 32 x 13 x 2 mm,<br />
mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Primo FL.: 3383; R.: 3360<br />
Nr. 2325-821 140 x 8 x 32 x 12 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Marshall Tufflex Fl.: V 21-HS; R.: F 21-57<br />
Nr. 2325-847 140 x 6 x 30 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Plus Plan Fl.: FLR 120 E; R.: BLR 80 ED<br />
Nr. 2325-852 140 x 8 x 24 x 15 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Deceuninck Fl.: 1707; R.: 1703<br />
Nr. 2325-853 140 x 6 x 28 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> LB-Profile und ACCORD<br />
Nr. 2325-857 140 x 6 x 28 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Kömmerling Eurodur Gold Fl.: 1472; R.: 1461<br />
Nr. 2325-862 140 x 6 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> KBE Fl.: 714; R.: 112<br />
Nr. 2325-867 140 x 8 x 28 x 15 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Wymar Fl.: 2217; R.: 2003<br />
Nr. 2325-870 140 x 8 x 20 x 8 x 2 mm, mit von hinten verstellbaren<br />
Führungsbolzen und Endkappen, passend <strong>für</strong> Roplasto, Actual,<br />
Wymar und Scanorama<br />
Nr. 2325-873 140 x 6 x 28 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Vekaplast und Eurofen<br />
Nr. 2325-881 wie Nr. 2325-818, jedoch 140 x 6 x 28 x 11 x 2 mm,<br />
Anschraublöcher versetzt, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Kömmerling Eurodur 3 S Fl.: 1416; R.: 1402<br />
Nr. 2325-883 140 x 8 x 28 x 14 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Brügmann Fl.: HF 954; R.: HF 962<br />
Nr. 2325-886 140 x 6 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Rehau Fl.: 551060; R.: 551080<br />
2325-767-3<br />
bis<br />
2325-886<br />
F 10
Profilsysteme Schließkästen und Schließbleche <strong>für</strong> Rundbolzen<br />
U-Profil-Schließbleche<br />
Nr. 2325-891 140 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Salamander Fl.: 201040 (UF 4); R.: 206020 (US 2)<br />
Nr. 2325-898 140 x 8 x 28 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Eurofen Fl.: ZP 120; R.: L 65<br />
Nr. 2325-900 140 x 6 x 26 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Alphacan, Deceuninck und Thyssen<br />
Nr. 2325-906 140 x 7 x 28 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Salamander Fl.: 301040; R.: 206030<br />
Nr. 2325-907 140 x 6 x 28 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Deceuninck Fl.: 1807; R.: 1801<br />
Nr. 2325-910 140 x 7 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Status System Fl.: 907; R.: 904<br />
Nr. 2325-912 140 x 6 x 28 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Plastmo Fl.: 6035035; R.: 6035025<br />
Nr. 2325-915 140 x 6 x 32 x 10,5 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Rehau Serie 730 und Osmo Comtess S,<br />
Anschraublöcher versetzt, Maß von Außenkante Anschlagschenkel bis<br />
Mitte Schraubloch 24 mm<br />
Nr. 2325-915-1 wie vor, jedoch Anschraublöcher versetzt, Maß von Außenkante<br />
Anschlagschenkel bis Mitte Schraubloch 8 mm<br />
Nr. 2325-916 140 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Knipping 3000 Fl.: SK 3055; R.: SK 3022<br />
Nr. 2325-919 140 x 8 x 32 x 12 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Thyssen Fl.: H 40-9090; R.: L 60-0166<br />
Nr. 2325-919-01 wie vor, jedoch mit von hinten verstellbaren Führungsbolzen<br />
und Endkappen<br />
Nr. 2325-919-2 140 x 8 x 32 x 13 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Thyssen Fl.: H 3/13-9055; R.: L 6-0144<br />
Nr. 2325-926 140 x 8 x 26 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Actual Fl.: PA 1416; R.: PA 1402<br />
Nr. 2325-927 140 x 8 x 26 x 12,5 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Alphacan Profilia Fl.: PE 613; R.: PE 601<br />
Nr. 2325-939 140 x 8 x 28 x 15 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Lucobay Fl.: 53-08; R.: 53-21<br />
Nr. 2325-940 140 x 6 x 26 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Actual Fl.: P 1508; R.: P 1501<br />
Nr. 2325-941 140 x 8 x 28 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Aluplast und ACCORD<br />
Nr. 2325-945 140 x 8 x 32 x 12 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Plus Plan Fl.: FR 99 V; R.: BR 76<br />
Nr. 2325-947 140 x 8 x 28 x 12 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Rehau Fl.: 546210; R.: 546180<br />
2325-891<br />
bis<br />
2325-947<br />
F 11
Profilsysteme Schließkästen und Schließbleche <strong>für</strong> Rundbolzen<br />
U-Profil-Schließbleche<br />
Nr. 2325-948 140 x 8 x 32 x 12 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Gealan Fl.: 3076; R.: 3008<br />
Nr. 2325-954 140 x 8 x 32 x 15 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Explast Fl.: E 612; R.: E 600<br />
Nr. 2325-958 140 x 6 x 32 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Actual Fl.: 6031; R.: 6028<br />
Nr. 2325-963 140 x 8 x 30 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> ISO 60 Fl.: ISO 17; R.: ISO 1<br />
Nr. 2325-964 140 x 8 x 32 x 15 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Stöckel Eco Step Fl.: 2262; R.: 2113<br />
Nr. 2325-966 140 x 6 x 28 x 13,5 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Deceuninck Serie Mondiale Fl.: 2021; R.: 2410<br />
Nr. 2325-967 140 x 8 x 32 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Veka Matrix Fl.: 105.163; R.: 101.113<br />
Nr. 2325-968 140 x 8 x 32 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Veka Matrix Fl.: 103.169; R.: 101.113<br />
Nr. 2325-971 140 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> ACCORD Fl.: 503.629; R.: 503.601<br />
Nr. 2325-971-1 wie vor, jedoch 140 x 8 x 26 x 8 x 2 mm,<br />
passend <strong>für</strong> ACCORD Fl.: AP 005; R.: AP 001<br />
Nr. 2325-978 140 x 8 x 28 x 13 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Kömmerling-Tritec<br />
Nr. 2325-983 140 x 8 x 28 x 12 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Aluplast Fl.: GM 1530; R.: GR 1501<br />
Nr. 2325-985 140 x 8 x 32 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Veka Matrix Fl.: 105.165; R.: 101.108<br />
Nr. 2325-987 140 x 8 x 28 x 16 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Plastival Fl.: F 003; R.: F 006<br />
Nr. 2325-990 140 x 8 x 32 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Spectus Fl.: SW 709; R.: SW 705<br />
Nr. 2325-991 140 x 6 x 30 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Profile 22 Fl.: 2235; R.: 2238<br />
Nr. 2325-997 140 x 8 x 26 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Trocal Fl.: 120200; R.: 110100<br />
Nr. 2325-999 140 x 8 x 32 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Rehau Fl.: 541170; R.: 514029<br />
2325-948<br />
bis<br />
2325-999<br />
F 12
Profilsysteme Schließkästen und Schließbleche <strong>für</strong> Schwenkriegel<br />
Schließkasten<br />
Nr. 2500-08-20-1 R Stulp 138 x 20 x 8,5 mm, abgerundet,<br />
Kastenstärke 14,5 mm, mit Wendeplatte, Andruck regulierbar<br />
Flach-Schließbleche<br />
Nr. 2830-03-18 180 x 18 x 3 mm, käntig<br />
Nr. 2830-03-18 R wie vor, jedoch abgerundet<br />
Nr. 2830-03-20 180 x 20 x 3 mm, käntig<br />
Nr. 2830-03-20 R wie vor, jedoch abgerundet<br />
Nr. 2830-03-22 180 x 22 x 3 mm, käntig<br />
Nr. 2830-03-24 180 x 24 x 3 mm, käntig<br />
Nr. 2830-03-24 R wie vor, jedoch abgerundet<br />
Nr. 2830-03-28 180 x 28 x 3 mm, käntig<br />
Nr. 2830-532 180 x 32 x 3 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Brügmann Fl.: HT 022; R.: HT 013<br />
Nr. 2830-572 180 x 32 x 3 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Veka Fl.: 105.181; R.: 102.118<br />
Winkel-Schließbleche<br />
Nr. 2820-502 180 x 23 x 11 x 3 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Kömmerling, bei Fortfall der Füll-Leiste, Stegmaß 6 mm<br />
Nr. 2820-502-1 180 x 28 x 11 x 3 mm, sonst wie vor, jedoch Stegmaß 4,8 mm<br />
Nr. 2820-502-4 wie vor, jedoch Stegmaß 6,8 mm<br />
Nr. 2820-502-6 180 x 28 x 11 x 3 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Kömmerling Fl.: 3051; R.: 3012<br />
Nr. 2820-520 180 x 34 x 7 x 3 mm, passend <strong>für</strong> Helling Fl.: 7130; R.: BI 6740<br />
Nr. 2820-531 180 x 32 x 6 x 3 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Veka Fl.: 105.081; R.: 101.086, Stegmaß 10,0 mm<br />
Nr. 2820-531-1 wie vor, jedoch Stegmaß 8,5 mm<br />
Nr. 2820-531-2 wie vor, jedoch Stegmaß 11 mm<br />
Nr. 2820-531-4 wie Nr. 2820-531-1, jedoch Anschraublöcher versetzt<br />
Nr. 2820-563 180 x 32 x 7 x 3 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Gromathic Fl.: GM 3121; R.: GM 3128<br />
Nr. 2820-570 180 x 32 x 7 x 3 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> KBE Profil in Verbindung mit U-Stulp-Verschluss<br />
Nr. 2820-591 180 x 30 x 8 x 3 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Trocal Innonova 70, Fl.: 522.400; R.: 510.200<br />
2830-03-18<br />
bis<br />
2830-03-28<br />
2500-08-20-1 R<br />
2820-502<br />
bis<br />
2820-591<br />
2830-532<br />
2830-572<br />
F 13
Profilsysteme Schließkästen und Schließbleche <strong>für</strong> Schwenkriegel<br />
U-Profil-Schließbleche<br />
Nr. 2825-06-18 180 x 6 x 18 x 6 x 2 mm<br />
Nr. 2825-08-18 180 x 8 x 18 x 8 x 2 mm<br />
Nr. 2825-06-20 180 x 6 x 20 x 6 x 2 mm, mit Endkappen<br />
Nr. 2825-08-20 180 x 8 x 20 x 8 x 2 mm, mit Endkappen<br />
Nr. 2825-10-20 180 x 10 x 20 x 10 x 2 mm, mit Endkappen<br />
Nr. 2825-12-20 180 x 12 x 20 x 12 x 2 mm, mit Endkappen<br />
Nr. 2825-06-22 180 x 6 x 22 x 6 x 2 mm, mit Endkappen<br />
Nr. 2825-08-22 180 x 8 x 22 x 8 x 2 mm, mit Endkappen<br />
Nr. 2825-10-22 180 x 10 x 22 x 10 x 2 mm, mit Endkappen<br />
Nr. 2825-06-24 180 x 6 x 24 x 6 x 2 mm, mit Endkappen<br />
Nr. 2825-08-24 180 x 8 x 24 x 8 x 2 mm, mit Endkappen<br />
Nr. 2825-10-24 180 x 10 x 24 x 10 x 2 mm, mit Endkappen<br />
Nr. 2825-10-24-1 180 x 10 x 24 x 10 x 2 mm, mit Endkappen<br />
passend <strong>für</strong> Rehau Serie 707<br />
Nr. 2825-12-24 180 x 12 x 24 x 12 x 2 mm, mit Endkappen<br />
Nr. 2825-06-26 180 x 6 x 26 x 6 x 2 mm, mit Endkappen<br />
Nr. 2825-08-26 180 x 8 x 26 x 8 x 2 mm, mit Endkappen<br />
Nr. 2825-10-26 180 x 10 x 26 x 10 x 2 mm, mit Endkappen<br />
Nr. 2825-06-28 180 x 6 x 28 x 6 x 2 mm, mit Endkappen<br />
Nr. 2825-08-28 180 x 8 x 28 x 8 x 2 mm, mit Endkappen<br />
Nr. 2825-10-28 180 x 10 x 28 x 10 x 2 mm, mit Endkappen<br />
Nr. 2825-06-30 180 x 6 x 30 x 6 x 2 mm, mit Endkappen<br />
Nr. 2825-08-30 180 x 8 x 30 x 8 x 2 mm, mit Endkappen<br />
Nr. 2825-10-30 180 x 10 x 30 x 10 x 2 mm, mit Endkappen<br />
Nr. 2825-112 180 x 6 x 32 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
als Variante zu Nr. 2820-531,<br />
passend <strong>für</strong> Veka Fl.: 105.081; R.: 101.085<br />
Nr. 2825-113 180 x 6 x 22 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Osmo Compress S Fl.: 2615; R.: 2602<br />
Nr. 2825-114 180 x 6 x 32 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Finstral Fl.: D 530; R.: D 533<br />
Nr. 2825-116 180 x 6 x 28 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Plastival Fl.: R 7012; R.: R 7000<br />
Nr. 2825-117 180 x 8 x 28 x 12 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Roplasto Fl.: 220400; R.: 210100<br />
2825-06-18<br />
bis<br />
2825-10-30<br />
2825-112<br />
bis<br />
2825-117<br />
F 14
Profilsysteme Schließkästen und Schließbleche <strong>für</strong> Schwenkriegel<br />
U-Profil-Schließbleche<br />
Nr. 2825-118 180 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Thyssen Fl.: H4/13-9065; R.: L3-0155<br />
Nr. 2825-120 180 x 8 x 32 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Trocal Fl.: 120200; R.: 111000<br />
Nr. 2825-121 180 x 8 x 32 x 16 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Kömmerling Fl.: 3023; R.: 3012<br />
Nr. 2825-122 180 x 8 x 28 x 14 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Aluplast Fl.: 140031; R.: 140001<br />
Nr. 2825-124 180 x 8 x 26 x 4 x 2 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Stöckel Fl.: 2262; R.: 2302<br />
Nr. 2825-126 180 x 8 x 30 x 8 x 2 mm, passend <strong>für</strong> Exte Fl.: 6002; R.: 6009<br />
Nr. 2825-146 180 x 6 x 32 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Veka Fl.: 103.202; R.: 101.200<br />
Nr. 2825-153 180 x 8 x 32 x 13 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Salamander 3D Fl.: 211240/DF4; R.: 110220/DR 1<br />
Nr. 2825-153-1 180 x 8 x 32 x 13 x 2 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Salamander, Anschraublöcher auf 22 mm<br />
Nr. 2825-501 180 x 6 x 20 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Profen Fl.: AB 105; R.: AS 102<br />
Nr. 2825-501-1 180 x 8 x 22 x 3,3 x 2 mm, mit Guss-Endkappen,<br />
passend <strong>für</strong> Trocal-Serie 900, Fl.: 920300 (TF 923);<br />
R.: 910100 (TF 911)<br />
Nr. 2825-504-6 180 x 6 x 32 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Kömmerling Fl.: SP 1416; R.: SP 1441<br />
Nr. 2825-505 180 x 8 x 18 x 8 x 2 mm, mit Guss-Endkappen,<br />
passend <strong>für</strong> Fulgurit Fl.: Isopur FL 95; R.: Isopur BL 68<br />
Nr. 2825-506 180 x 7 x 20 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Tehalit, Brügmann-Frisoplast Serie 2001,<br />
Roplasto und Thyssen<br />
Nr. 2825-507 180 x 8 x 28 x 14 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Rehau Serie 709<br />
Nr. 2825-507-01 180 x 8 x 28 x 14 x 2 mm, sonst wie vor,<br />
jedoch mit von hinten verstellbaren Führungsbolzen, mit Endkappen<br />
Nr. 2825-508 180 x 6,5 x 20 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Veka Fl.: 105.014; R.: 101.019<br />
Nr. 2825-509 180 x 6,5 x 20 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Cork Plastics<br />
Nr. 2825-511 180 x 6 x 30 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Stöckel Fl.: 1212; R.: 1111<br />
Nr. 2825-512 180 x 8 x 18 x 8 x 2 mm, mit Guss-Endkappen,<br />
passend <strong>für</strong> Isobelec Fl.: GZ 126; R.: D 70<br />
Nr. 2825-518 180 x 7 x 28 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Veka Fl.: 105.013; R.: 101.018<br />
Nr. 2825-519 180 x 8 x 20 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Aluplast Fl.: GF 1030; R.: GR 1000<br />
2825-118<br />
bis<br />
2825-519<br />
F 15
Profilsysteme Schließkästen und Schließbleche <strong>für</strong> Schwenkriegel<br />
U-Profil-Schließbleche<br />
Nr. 2825-519-3 180 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Aluplast Fl.: GF 1030; R.: GR 1001<br />
Nr. 2825-520 180 x 6 x 22 x 14 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Kömmerling Fl.: 3022; R.: 3012, Stegmaß 5,5 mm<br />
Nr. 2825-520-2 180 x 6 x 28 x 14 x 2 mm, sonst wie vor, jedoch Stegmaß 5,7 mm<br />
Nr. 2825-520-6 ersetzt durch Nr. 2825-966<br />
Nr. 2825-520-9 wie Nr. 2825-520, jedoch 180 x 6 x 28 x 14 x 2 mm,<br />
passend <strong>für</strong> Kömmerling Fl.: SP 1233; R.: SP 1279, Stegmaß 2,5 mm<br />
Nr. 2825-522 180 x 6 x 22 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Aluplast Fl.: H 10 S; R.: H 31 M<br />
Nr. 2825-523 180 x 8 x 24 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> LB-Plastic Fl.: SW 7004; R.: SW 7002<br />
Nr. 2825-524 180 x 8 x 20 x 8 x 2 mm, mit Guss-Endkappen, passend <strong>für</strong> Winsol<br />
Nr. 2825-525 180 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Salamander Fl.: 201040 (UF 4);<br />
R.: 200020 (UR 2) mit SL 68537 beschnitten<br />
Nr. 2825-526 180 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Salamander Fl.: 301040 (TF 13);<br />
R.: 200020 (UR 2) mit SL 68537 beschnitten<br />
Nr. 2825-528 180 x 8 x 22 x 7 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Plastmo Fl.: 5032080; R.: 5032020<br />
Nr. 2825-531 180 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Osmo 71/70<br />
Nr. 2825-532 180 x 8 x 24 x 5 x 2 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Coopre Fl.: SB 210; R.: SB 100<br />
Nr. 2825-533 ersetzt durch Nr. 2825-978<br />
Nr. 2825-535 180 x 8 x 24 x 12 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> KBE, Alphacan System Master und Alphacan Fersina<br />
Nr. 2825-536 180 x 6 x 24 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Deceuninck Fl.: 806; R.: 852<br />
Nr. 2825-542 180 x 6 x 24 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> F.A.L und Actual<br />
Nr. 2825-547 180 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Inefa<br />
Nr. 2825-549 180 x 6 x 24 x 6 x 2 mm, mit Endkappen,<br />
Anschraublöcher versetzt, passend <strong>für</strong> Vekaplast<br />
Nr. 2825-550 180 x 8 x 28 x 8 x 2 mm, mit Guss-Endkappen<br />
passend <strong>für</strong> Trocal Serie 900 Fl.: 920500 (TF 925);<br />
R.: 910100 (TF 911), Stegmaß 7,5 mm<br />
Nr. 2825-550-3 wie vor, jedoch Stegmaß 7 mm<br />
Nr. 2825-555 180 x 6 x 32 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Brügmann Fl.: HT 020; R.: HT 010<br />
2825-519-3<br />
bis<br />
2825-555<br />
F 16
Profilsysteme Schließkästen und Schließbleche <strong>für</strong> Schwenkriegel<br />
U-Profil-Schließbleche<br />
Nr. 2825-557-01 180 x 6 x 20 x 6 x 2 mm, mit von hinten verstellbaren<br />
Führungsbolzen und Endkappen, passend <strong>für</strong> Rehau Fl.: 549050; R.:<br />
549110<br />
Nr. 2825-558 180 x 6 x 24 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Deceuninck Fl.: 855; R.: 852<br />
Nr. 2825-559 180 x 8 x 28 x 14 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Salamander Fl.: 301040 (TF 13); R.: 200020 (UR 2)<br />
Nr. 2825-560 180 x 8 x 28x 14 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Salamander Fl.: 201040 (UF 4); R.: 200020 (UR 2)<br />
Nr. 2825-563 180 x 6 x 22 x 6 x 2 mm, mit Guss-Endkappen,<br />
passend <strong>für</strong> Osmo Fl.: 2018; R.: 2017<br />
Nr. 2825-569 180 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Pural Fl.: P 006; R.: P 002<br />
Nr. 2825-569-2 180 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Pural Fl.: P 022 (alt); R.: P 002<br />
Nr. 2825-569-3 180 x 6 x 28 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Pural Fl.: P 022; R.: P 002<br />
Nr. 2825-573 180 x 8 x 20 x 15 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Deceuninck Fl.: 855; R.: 801<br />
Nr. 2825-575 180 x 6 x 28 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Helmitin Fl.: 4-60087; R.: 4-60059<br />
Nr. 2825-582 180 x 6 x 30 x 14 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Spectus Fl.: SW 07; R.: SW 05<br />
Nr. 2825-585 180 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Aluplast und Gealan<br />
Nr. 2825-587 180 x 8 x 24 x 12 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Gromathic Fl.: GM 2601; R.: GM 2408<br />
Nr. 2825-588 180 x 6 x 28 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Helmitin Fl.: 60087; R.: 60111<br />
Nr. 2825-588-2 wie Nr. 2825-722, jedoch 180 x 6 x 28 x 11 x 2 mm,<br />
Anschraublöcher versetzt, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Helmitin Fl.: 4-60193; R.: 4-60180<br />
Nr. 2825-589 180 x 7 x 28 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Duraflex Fl.: TD 1801; R.: TD 1802<br />
Nr. 2825-590 180 x 5 x 28 x 11 x 2 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Kömmerling Fl.: SP 1232; R.: SP 1249<br />
Nr. 2825-592 180 x 6 x 26 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Roplasto Fl.: 629800; R.: 611400<br />
Nr. 2825-594 180 x 6 x 22 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Coopre Fl.: GB 202; R.: GB 102<br />
Nr. 2825-597 180 x 6 x 26 x 13 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Alphacan System Master Fl.: TIO 02; R.: ELA 02<br />
Nr. 2825-702 180 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Thyssen Fl.: ZM 3-0164; R.: LM 10-0108<br />
2825-557-01<br />
bis<br />
2825-702<br />
F 17
Profilsysteme Schließkästen und Schließbleche <strong>für</strong> Schwenkriegel<br />
U-Profil-Schließbleche<br />
Nr. 2825-703 180 x 6 x 24 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Thyssen Fl.: H5-9070; R.: L3-0155<br />
Nr. 2825-706 180 x 6 x 26 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Osmo Fl.: 2195; R.: 2171<br />
Nr. 2825-707 180 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Plastival Fl.: R 7012; R.: R 7000<br />
Nr. 2825-708 180 x 6 x 22 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Veka Fl.: 103.047; R.: 101.041<br />
Nr. 2825-709 180 x 10 x 28 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Actual Fl.: P1409; R.: 1402<br />
Nr. 2825-713 180 x 8 x 32 x 13 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Alphacan Fersina Fl.: POR; R.: ELA<br />
Nr. 2825-717 180 x 8 x 30 x 13 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Alphacan Profilia und Alphacan Fersina<br />
Nr. 2825-718 180 x 8 x 32 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Alphacan Profilia Fl.: PK193; R.: PF089<br />
Nr. 2825-721 180 x 6 x 28 x 14 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> LB-Profile Fl.: Z5; R.: T7<br />
Nr. 2825-722 wie Nr. 2825-588-2, jedoch 180 x 8 x 28 x 13 x 2 mm,<br />
Anschraublöcher versetzt, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Helmitin Fl.: 4-60193; R.: 4-60180<br />
Nr. 2825-725 180 x 8 x 28 x 11 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Roplasto Fl.: 618502; R.: 619003<br />
Nr. 2825-731-1 180 x 6 x 30 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Profile 22 Fl.: 2230; R.: 2207<br />
Nr. 2825-733 180 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Plastival, Aluplast, Komarek, Primo, Rehau und Osmo,<br />
Stegmaß 5,5 mm<br />
Nr. 2825-733-2 180 x 8 x 28 x 8 x 2 mm, sonst wie vor, jedoch Stegmaß 7 mm<br />
Nr. 2825-735 180 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Aluplast Fl.: 100038; R.: 100027<br />
Nr. 2825-736 180 x 6 x 28 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Dimat Fl.: 621; R.: 610-3<br />
Nr. 2825-744 180 x 6 x 20 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Gromathic Fl.: GM 3005; R.: GM 3008<br />
Nr. 2825-755 180 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Komarek VI Fl.: FBI 163; R.: FBA 044<br />
Nr. 2825-757 180 x 8 x 30 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> ACCORD System 503<br />
Nr. 2825-758 180 x 8 x 28 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Vekaplast<br />
Nr. 2825-762 180 x 10 x 22 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Rehau Fl.: 560220; R.: 560490<br />
2825-703<br />
bis<br />
2825-762<br />
F 18
Profilsysteme Schließkästen und Schließbleche <strong>für</strong> Schwenkriegel<br />
U-Profil-Schließbleche<br />
Nr. 2825-763 180 x 8 x 24 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> KBE Fl.: 112; R.: 102<br />
Nr. 2825-764 180 x 6 x 32 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Kömmerling und Plus Plan<br />
Nr. 2825-767 180 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> ACCORD Fl.: 900.222; R.: 503.601<br />
Nr. 2825-767-2 180 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Actual Fl.: 1508; R.: 1501<br />
Nr. 2825-767-3 180 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Actual Fl.: 1515; R.: 1501<br />
Nr. 2825-788 180 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> KBE, Lucobay, Spectus, Deceuninck und Stöckel<br />
Nr. 2825-788-1 wie vor, jedoch 180 x 8 x 28 x 4 x 2 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> KBE Fl.: 714; R.: 134<br />
Nr. 2825-799 wie Nr. 2825-706, jedoch 180 x 8 x 26 x 8 x 2 mm,<br />
mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Osmo Fl.: 2195; R.: 2171<br />
Nr. 2825-801 180 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Thyssen Fl.: H 4-9060; R.: L 3-0155<br />
Nr. 2825-802 180 x 10 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Actual System 300<br />
Nr. 2825-818 wie Nr. 2825-881, jedoch 180 x 8 x 28 x 13 x 2 mm,<br />
Anschraublöcher versetzt, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Kömmerling Eurodur 3S, Stegmaß 8 mm<br />
Nr. 2825-818-3 wie vor, jedoch Stegmaß 6 mm<br />
Nr. 2825-818-5 wie Nr. 2825-818, jedoch 180 x 8 x 32 x 13 x 2 mm,<br />
mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Primo FL.: 3383; R.: 3360<br />
Nr. 2825-821 180 x 8 x 32 x 12 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Marshall Tufflex Fl.: V 21-HS; R.: F 21-57<br />
Nr. 2825-847 180 x 6 x 30 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Plus Plan Fl.: FLR 120 E; R.: BLR 80 ED<br />
Nr. 2825-852 180 x 8 x 24 x 15 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Deceuninck Fl.: 1707; R.: 1703<br />
Nr. 2825-853 180 x 6 x 28 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> LB-Profile und ACCORD<br />
Nr. 2825-857 180 x 6 x 28 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Kömmerling Eurodur Gold Fl.: 1472; R.: 1461<br />
Nr. 2825-862 180 x 6 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> KBE Fl.: 714; R.: 112<br />
Nr. 2825-867 180 x 8 x 28 x 15 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Wymar Fl.: 2217; R.: 2003<br />
Nr. 2825-870 180 x 8 x 20 x 8 x 2 mm, mit von hinten verstellbaren<br />
Führungsbolzen und Endkappen, passend <strong>für</strong> Roplasto, Actual, Wymar<br />
und Scanorama<br />
Nr. 2825-873 180 x 6 x 28 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Vekaplast und Eurofen<br />
2825-763<br />
bis<br />
2825-873<br />
F 19
Profilsysteme Schließkästen und Schließbleche <strong>für</strong> Schwenkriegel<br />
U-Profil-Schließbleche<br />
Nr. 2825-881 wie Nr. 2825-818, jedoch 180 x 6 x 28 x 11 x 2 mm,<br />
Anschraublöcher versetzt, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Kömmerling Eurodur 3 S Fl.: 1416; R.: 1402<br />
Nr. 2825-883 180 x 8 x 28 x 14 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Brügmann Fl.: HF 954; R.: HF 962<br />
Nr. 2825-886 180 x 6 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Rehau Fl.: 551060; R.: 551080<br />
Nr. 2825-891 180 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Salamander Fl.: 201040 (UF 4); R.: 206020 (US 2)<br />
Nr. 2825-898 180 x 8 x 28 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Eurofen Fl.: ZP 120; R.: L 65<br />
Nr. 2825-900 180 x 6 x 26 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Alphacan, Deceuninck und Thyssen<br />
Nr. 2825-906 180 x 7 x 28 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Salamander Fl.: 301040; R.: 206030<br />
Nr. 2825-907 180 x 6 x 28 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Deceuninck Fl.: 1807; R.: 1801<br />
Nr. 2825-910 180 x 7 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Status System Fl.: 907; R.: 904<br />
Nr. 2825-912 180 x 6 x 28 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Plastmo Fl.: 6035035; R.: 6035025<br />
Nr. 2825-915 180 x 6 x 32 x 10,5 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Rehau Serie 730 und Osmo Comtess S,<br />
Anschraublöcher versetzt, Maß von Außenkante Anschlagschenkel<br />
bis Mitte Schraubloch 24 mm<br />
Nr. 2825-915-1 wie vor, jedoch Anschraublöcher versetzt,<br />
Maß von Außenkante Anschlagschenkel bis Mitte Schraubloch 8 mm<br />
Nr. 2825-916 180 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Knipping 3000 Fl.: SK 3055; R.: SK 3022<br />
Nr. 2825-919 180 x 8 x 32 x 12 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Thyssen Fl.: H 40-9090; R.: L 60-0166<br />
Nr. 2825-919-01 wie vor, jedoch mit von hinten verstellbaren Führungsbolzen<br />
und Endkappen<br />
Nr. 2825-919-2 180 x 8 x 32 x 13 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Thyssen Fl.: H 3/13-9055; R.: L 6-0144<br />
Nr. 2825-926 180 x 8 x 26 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Actual Fl.: PA 1416; R.: PA 1402<br />
Nr. 2825-927 180 x 8 x 26 x 12,5 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Alphacan Profilia Fl.: PE613; R.: PE601<br />
Nr. 2825-939 180 x 8 x 28 x 15 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Lucobay Fl.: 53-08; R.: 53-21<br />
Nr. 2825-940 180 x 6 x 26 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Actual Fl.: P 1508; R.: P 1501<br />
2825-881<br />
bis<br />
2825-940<br />
F 20
Profilsysteme Schließkästen und Schließbleche <strong>für</strong> Schwenkriegel<br />
U-Profil-Schließbleche<br />
Nr. 2825-941 180 x 8 x 28 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Aluplast und ACCORD<br />
Nr. 2825-945 180 x 8 x 32 x 12 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Plus Plan Fl.: FR 99 V; R.: BR 76<br />
Nr. 2825-947 180 x 8 x 28 x 12 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Rehau Fl.: 546210; R.: 546180<br />
Nr. 2825-948 180 x 8 x 32 x 12 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Gealan Fl.: 3076; R.: 3008<br />
Nr. 2825-954 180 x 8 x 32 x 15 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Explast Fl.: E 612; R.: E 600<br />
Nr. 2825-958 180 x 6 x 32 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Actual Fl.: 6031; R.: 6028<br />
Nr. 2825-963 180 x 8 x 30 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> ISO 60 Fl.: ISO 17; R.: ISO 1<br />
Nr. 2825-964 180 x 8 x 32 x 15 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Stöckel Eco Step Fl.: 2262; R.: 2113<br />
Nr. 2825-966 180 x 6 x 28 x 13,5 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Deceuninck Serie Mondiale Fl.: 2021; R.: 2410<br />
Nr. 2825-967 180 x 8 x 32 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Veka Matrix Fl.: 105.163; R.: 101.113<br />
Nr. 2825-968 180 x 8 x 32 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Veka Matrix Fl.: 103.169; R.: 101.113<br />
Nr. 2825-971 180 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> ACCORD Fl.: 503.629; R.: 503.601<br />
Nr. 2825-971-1 wie vor, jedoch 180 x 8 x 26 x 8 x 2 mm,<br />
passend <strong>für</strong> ACCORD Fl.: AP 005; R.: AP 001<br />
Nr. 2825-978 180 x 8 x 28 x 13 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Kömmerling-Tritec<br />
Nr. 2825-983 180 x 8 x 28 x 12 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Aluplast Fl.: GM 1530; R.: GR 1501<br />
Nr. 2825-985 180 x 8 x 32 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Veka Matrix Fl.: 105.165; R.: 101.108<br />
Nr. 2825-987 180 x 8 x 28 x 16 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Plastival Fl.: F 003; R.: F 006<br />
Nr. 2825-990 180 x 8 x 32 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Spectus Fl.: SW 709; R.: SW 705<br />
Nr. 2825-991 180 x 6 x 30 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Profile 22 Fl.: 2235; R.: 2238<br />
Nr. 2825-997 180 x 8 x 26 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Trocal Fl.: 120200; R.: 110100<br />
Nr. 2825-999 180 x 8 x 32 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Rehau Fl.: 541170; R.: 514029<br />
2825-941<br />
bis<br />
2825-999<br />
F 21
Profilsysteme Schließkasten und Schließbleche <strong>für</strong> Bolzen-Schwenkriegelkombination<br />
Schließkasten<br />
Nr. 3600-08-20 R Stulp 138 x 20 x 8,5 mm, abgerundet, Kastenstärke 14,5 mm,<br />
mit Wendeplatte, Andruck regulierbar<br />
Flach-Schließbleche<br />
Nr. 3630-03-18 180 x 18 x 3 mm, käntig<br />
Nr. 3630-03-18 R wie vor, jedoch abgerundet<br />
Nr. 3630-03-20 180 x 20 x 3 mm, käntig<br />
Nr. 3630-03-20 R wie vor, jedoch abgerundet<br />
Nr. 3630-03-22 180 x 22 x 3 mm, käntig<br />
Nr. 3630-03-24 180 x 24 x 3 mm, käntig<br />
Nr. 3630-03-24 R wie vor, jedoch abgerundet<br />
Nr. 3630-03-28 180 x 28 x 3 mm, käntig<br />
Nr. 3630-532 180 x 32 x 3 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Brügmann Fl.: HT 022; R.: HT 013<br />
Nr. 3630-572 180 x 32 x 3 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Veka Fl.: 105.181; R.: 102.118<br />
Winkel-Schließbleche<br />
Nr. 3620-502 180 x 23 x 11 x 3 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Kömmerling, bei Fortfall der Füll-Leiste, Stegmaß 5,5 mm<br />
Nr. 3620-502-1 180 x 28 x 11 x 3 mm, sonst wie vor, jedoch Stegmaß 4,3 mm<br />
Nr. 3620-502-4 wie vor, jedoch Stegmaß 6,8 mm<br />
Nr. 3620-502-6 180 x 28 x 11 x 3 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Kömmerling Fl.: 3051; R.: 3012, Stegmaß 5,5 mm<br />
Nr. 3620-520 180 x 34 x 7 x 3 mm, passend <strong>für</strong> Helling Fl.: 7130; R.: BI 6740<br />
Nr. 3620-531 180 x 32 x 6 x 3 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Veka Fl.: 105.081; R.: 101.086, Stegmaß 9,3 mm<br />
Nr. 3620-531-1 wie vor, jedoch Stegmaß 8,0 mm<br />
Nr. 3620-531-2 wie vor, jedoch Stegmaß 10,5 mm<br />
Nr. 3620-531-4 wie Nr. 3620-531-1, jedoch Anschraublöcher versetzt<br />
Nr. 3620-563 180 x 32 x 7 x 3 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Gromathic Fl.: GM 3121; R.: GM 3128<br />
Nr. 3620-570 180 x 32 x 7 x 3 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> KBE Profil in Verbindung mit U-Stulp-Verschluss<br />
Nr. 3620-591 180 x 30 x 8 x 3 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Trocal Innonova 70, Fl.: 522.400; R.: 510.200<br />
3630-03-18<br />
bis<br />
3630-03-28<br />
3600-08-20 R<br />
3620-502<br />
bis<br />
3620-591<br />
3630-532<br />
3630-572<br />
F 22
Profilsysteme Schließkasten und Schließbleche <strong>für</strong> Bolzen-Schwenkriegelkombination<br />
U-Profil-Schließbleche<br />
Nr. 3625-06-18 180 x 6 x 18 x 6 x 2 mm<br />
Nr. 3625-08-18 180 x 8 x 18 x 8 x 2 mm<br />
Nr. 3625-06-20 180 x 6 x 20 x 6 x 2 mm, mit Endkappen<br />
Nr. 3625-08-20 180 x 8 x 20 x 8 x 2 mm, mit Endkappen<br />
Nr. 3625-10-20 180 x 10 x 20 x 10 x 2 mm, mit Endkappen<br />
Nr. 3625-12-20 180 x 12 x 20 x 12 x 2 mm, mit Endkappen<br />
Nr. 3625-06-22 180 x 6 x 22 x 6 x 2 mm, mit Endkappen<br />
Nr. 3625-08-22 180 x 8 x 22 x 8 x 2 mm, mit Endkappen<br />
Nr. 3625-10-22 180 x 10 x 22 x 10 x 2 mm, mit Endkappen<br />
Nr. 3625-06-24 180 x 6 x 24 x 6 x 2 mm, mit Endkappen<br />
Nr. 3625-08-24 180 x 8 x 24 x 8 x 2 mm, mit Endkappen<br />
Nr. 3625-10-24 180 x 10 x 24 x 10 x 2 mm, mit Endkappen<br />
Nr. 3625-10-24-1 180 x 10 x 24 x 10 x 2 mm, mit Endkappen<br />
passend <strong>für</strong> Rehau Serie 707<br />
Nr. 3625-12-24 180 x 12 x 24 x 12 x 2 mm, mit Endkappen<br />
Nr. 3625-06-26 180 x 6 x 26 x 6 x 2 mm, mit Endkappen<br />
Nr. 3625-08-26 180 x 8 x 26 x 8 x 2 mm, mit Endkappen<br />
Nr. 3625-10-26 180 x 10 x 26 x 10 x 2 mm, mit Endkappen<br />
Nr. 3625-06-28 180 x 6 x 28 x 6 x 2 mm, mit Endkappen<br />
Nr. 3625-08-28 180 x 8 x 28 x 8 x 2 mm, mit Endkappen<br />
Nr. 3625-10-28 180 x 10 x 28 x 10 x 2 mm, mit Endkappen<br />
Nr. 3625-06-30 180 x 6 x 30 x 6 x 2 mm, mit Endkappen<br />
Nr. 3625-08-30 180 x 8 x 30 x 8 x 2 mm, mit Endkappen<br />
Nr. 3625-10-30 180 x 10 x 30 x 10 x 2 mm, mit Endkappen<br />
Nr. 3625-112 180 x 6 x 32 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
als Variante zu Nr. 3620-531, passend <strong>für</strong> Veka Fl.: 105.081;<br />
R.: 101.085<br />
Nr. 3625-113 180 x 6 x 22 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Osmo Compress S Fl.: 2615; R.: 2602<br />
Nr. 3625-114 180 x 6 x 32 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Finstral Fl.: D 530; R.: D 533<br />
Nr. 3625-116 180 x 6 x 28 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Plastival Fl.: R 7012; R.: R 7000<br />
Nr. 3625-117 180 x 8 x 28 x 12 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Roplasto Fl.: 220400; R.: 210100<br />
3625-06-18<br />
bis<br />
3625-10-30<br />
3625-112<br />
bis<br />
3625-117<br />
F 23
Profilsysteme Schließkasten und Schließbleche <strong>für</strong> Bolzen-Schwenkriegelkombination<br />
U-Profil-Schließbleche<br />
Nr. 3625-118 180 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Thyssen Fl.: H4/13-9065; R.: L3-0155<br />
Nr. 3625-120 180 x 8 x 32 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Trocal Fl.: 120200; R.: 111000<br />
Nr. 3625-121 180 x 8 x 32 x 16 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Kömmerling Fl.: 3023; R.: 3012<br />
Nr. 3625-122 180 x 8 x 28 x 14 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Aluplast Fl.: 140031; R.: 140001<br />
Nr. 3625-124 180 x 8 x 26 x 4 x 2 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Stöckel Fl.: 2262; R.: 2302<br />
Nr. 3625-126 180 x 8 x 30 x 8 x 2 mm, passend <strong>für</strong> Exte Fl.: 6002; R.: 6009<br />
Nr. 3625-146 180 x 6 x 32 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Veka Fl.: 103.202; R.: 101.200<br />
Nr. 3625-153 180 x 8 x 32 x 13 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Salamander 3D Fl.: 211240/DF4; R.: 110220/DR1<br />
Nr. 3625-153-1 180 x 8 x 32 x 13 x 2 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Salamander, Anschraublöcher auf 22 mm<br />
Nr. 3625-501 180 x 6 x 20 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Profen Fl.: AB 105; R.: AS 102<br />
Nr. 3625-501-1 180 x 8 x 22 x 3,3 x 2 mm, mit Guss-Endkappen,<br />
passend <strong>für</strong> Trocal-Serie 900, Fl.: 920300 (TF 923);<br />
R.: 910100 (TF 911)<br />
Nr. 3625-504-6 180 x 6 x 32 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Kömmerling Fl.: SP 1416; R.: SP 1441<br />
Nr. 3625-505 180 x 8 x 18 x 8 x 2 mm, mit Guss-Endkappen,<br />
passend <strong>für</strong> Fulgurit Fl.: Isopur FL 95; R.: Isopur BL 68<br />
Nr. 3625-506 180 x 7 x 20 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Tehalit, Brügmann-Frisoplast Serie 2001,<br />
Roplasto und Thyssen<br />
Nr. 3625-507 180 x 8 x 28 x 14 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Rehau Serie 709<br />
Nr. 3625-507-01 wie vor, jedoch mit von hinten verstellbaren Führungsbolzen<br />
und Endkappen<br />
Nr. 3625-508 180 x 6,5 x 20 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Veka Fl.: 105.014; R.: 101.019<br />
Nr. 3625-509 180 x 6,5 x 20 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Cork Plastics<br />
Nr. 3625-511 180 x 6 x 30 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Stöckel Fl.: 1212; R.: 1111<br />
Nr. 3625-512 180 x 8 x 18 x 8 x 2 mm, mit Guss-Endkappen,<br />
passend <strong>für</strong> Isobelec Fl.: GZ 126; R.: D 70<br />
Nr. 3625-518 180 x 7 x 28 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Veka Fl.: 105.013; R.: 101.018<br />
Nr. 3625-519 180 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Aluplast Fl.: GF 1030; R.: GR 1000<br />
3625-118<br />
bis<br />
3625-519<br />
F 24
Profilsysteme Schließkasten und Schließbleche <strong>für</strong> Bolzen-Schwenkriegelkombination<br />
U-Profil-Schließbleche<br />
Nr. 3625-519-3 180 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Aluplast Fl.: GF 1030; R.: GR 1001<br />
Nr. 3625-520 180 x 6 x 22 x 14 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Kömmerling Fl.: 3022; R.: 3012, Stegmaß 5,5 mm<br />
Nr. 3625-520-2 180 x 6 x 28 x 14 x 2 mm, sonst wie vor<br />
Nr. 3625-520-6 ersetzt durch Nr. 3625-966<br />
Nr. 3625-520-9 wie Nr. 3625-520, jedoch 180 x 6 x 28 x 14 x 2 mm,<br />
passend <strong>für</strong> Kömmerling Fl.: SP 1233; R.: SP 1279, Stegmaß 2,5 mm<br />
Nr. 3625-522 180 x 6 x 22 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Aluplast Fl.: H 10 S; R.: H 31 M<br />
Nr. 3625-523 180 x 8 x 24 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> LB-Plastic Fl.: SW 7004; R.: SW 7002<br />
Nr. 3625-524 180 x 8 x 20 x 8 x 2 mm, mit Guss-Endkappen, passend <strong>für</strong> Winsol<br />
Nr. 3625-525 180 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Salamander Fl.: 201040 (UF 4);<br />
R.: 200020 (UR 2) mit SL 68537 beschnitten<br />
Nr. 3625-526 180 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Salamander Fl.: 301040 (TF 13);<br />
R.: 200020 (UR 2) mit SL 68537 beschnitten<br />
Nr. 3625-528 180 x 8 x 22 x 7 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Plastmo Fl.: 5032080; R.: 5032020<br />
Nr. 3625-531 180 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Osmo 71/70<br />
Nr. 3625-532 180 x 8 x 24 x 5 x 2 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Coopre Fl.: SB 210; R.: SB 100<br />
Nr. 3625-533 ersetzt durch Nr. 3625-978<br />
Nr. 3625-535 180 x 8 x 28 x 12 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> KBE, Alphacan System Master und Alphacan Fersina<br />
Nr. 3625-536 180 x 6 x 24 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Deceuninck Fl.: 806; R.: 852<br />
Nr. 3625-542 180 x 6 x 24 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> F.A.L und Actual<br />
Nr. 3625-547 180 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Inefa<br />
Nr. 3625-549 180 x 6 x 24 x 6 x 2 mm, mit Endkappen,<br />
Anschraublöcher versetzt, passend <strong>für</strong> Vekaplast<br />
Nr. 3625-550 180 x 8 x 28 x 8 x 2 mm, mit Guss-Endkappen,<br />
passend <strong>für</strong> Trocal Serie 900 Fl.: 920500 (TF 925);<br />
R.: 910100 (TF 911), Stegmaß 5,5 mm<br />
Nr. 3625-550-3 wie vor, jedoch Stegmaß 6,5 mm<br />
Nr. 3625-555 180 x 6 x 32 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Brügmann Fl.: HT 020; R.: HT 010<br />
3625-519-3<br />
bis<br />
3625-555<br />
F 25
Profilsysteme Schließkasten und Schließbleche <strong>für</strong> Bolzen-Schwenkriegelkombination<br />
U-Profil-Schließbleche<br />
Nr. 3625-557-01 180 x 6 x 20 x 6 x 2 mm, mit von hinten verstellbaren<br />
Führungsbolzen und Endkappen, passend <strong>für</strong> Rehau Fl.: 549050; R.:<br />
549110<br />
Nr. 3625-558 180 x 6 x 24 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Deceuninck Fl.: 855; R.: 852<br />
Nr. 3625-559 180 x 8 x 28 x 14 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Salamander Fl.: 301040 (TF 13); R.: 200020 (UR 2)<br />
Nr. 3625-560 180 x 8 x 28 x 14 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Salamander Fl.: 201040 (UF 4); R.: 200020 (UR 2)<br />
Nr. 3625-563 180 x 6 x 22 x 6 x 2 mm, mit Guss-Endkappen,<br />
passend <strong>für</strong> Osmo Fl.: 2018; R.: 2017<br />
Nr. 3625-569 180 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Pural Fl.: P 006; R.: P 002<br />
Nr. 3625-569-2 180 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Pural Fl.: P 022 (alt); R.: P 002<br />
Nr. 3625-569-3 180 x 6 x 28 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Pural Fl.: P 022; R.: P 002<br />
Nr. 3625-573 180 x 8 x 20 x 15 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Deceuninck Fl.: 855; R.: 801<br />
Nr. 3625-575 180 x 6 x 32 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Helmitin Fl.: 4-60087; R.: 4-60059<br />
Nr. 3625-582 180 x 6 x 30 x 14 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Spectus Fl.: SW 07; R.: SW 05<br />
Nr. 3625-585 180 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Aluplast und Gealan<br />
Nr. 3625-587 180 x 6 x 28 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Gromathic Fl.: GM 2601; R.: GM 2408<br />
Nr. 3625-588 180 x 6 x 28 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Helmitin Fl.: 60087; R.: 60111<br />
Nr. 3625-588-2 wie Nr. 3625-722, jedoch 180 x 6 x 28 x 11 x 2 mm,<br />
versetzte Anschraublöcher, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Helmitin Fl.: 4-60193; R.: 4-60180<br />
Nr. 3625-589 180 x 7 x 28 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Duraflex Fl.: TD 1801; R.: TD 1802<br />
Nr. 3625-590 180 x 5 x 28 x 11 x 2 mm, mit Führungsbolzen,<br />
passend <strong>für</strong> Kömmerling Fl.: SP 1232; R.: SP 1249<br />
Nr. 3625-592 180 x 6 x 26 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Roplasto Fl.: 629800; R.: 611400<br />
Nr. 3625-594 180 x 6 x 22 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Coopre Fl.: GB 202; R.: GB 102<br />
Nr. 3625-597 180 x 8 x 26 x 13 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Alphacan System Master Fl.: TIO 02; R.: ELA 02<br />
Nr. 3625-702 180 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Thyssen Fl.: ZM 3-0164; R.: LM 10-0108<br />
3625-557-01<br />
bis<br />
3625-702<br />
F 26
Profilsysteme Schließkasten und Schließbleche <strong>für</strong> Bolzen-Schwenkriegelkombination<br />
U-Profil-Schließbleche<br />
Nr. 3625-703 180 x 6 x 28 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Thyssen Fl.: H5-9070; R.: L3-0155<br />
Nr. 3625-706 180 x 6 x 26 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Osmo Fl.: 2195; R.: 2171<br />
Nr. 3625-707 180 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Plastival Fl.: R 7012; R.: R 7000<br />
Nr. 3625-708 180 x 6 x 28 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Veka Fl.: 103.047; R.: 101.041<br />
Nr. 3625-709 180 x 10 x 28 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Actual Fl.: P 1409; R.: 1402<br />
Nr. 3625-713 180 x 8 x 28 x 13 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Alphacan Fersina Fl.: POR; R.: ELA<br />
Nr. 3625-717 180 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Alphacan Profilia und Alphacan Fersina<br />
Nr. 3625-718 180 x 8 x 32 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Alphacan Profilia Fl.: PK 193; R.: PF 089<br />
Nr. 3625-721 180 x 6 x 28 x 14 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> LB-Profile Fl.: Z 5; R.: T 7<br />
Nr. 3625-722 wie Nr. 3625-588-2, jedoch 180 x 8 x 28 x 13 x 2 mm,<br />
versetzte Anschraublöcher, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Helmitin Fl.: 4-60193; R.: 4-60180<br />
Nr. 3625-725 180 x 8 x 28 x 11 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Roplasto Fl.: 618502; R.: 619003<br />
Nr. 3625-731-1 180 x 6 x 30 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Profile 22 Fl.: 2230; R.: 2207<br />
Nr. 3625-733 180 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Plastival, Aluplast, Komarek, Primo, Rehau und Osmo,<br />
Stegmaß 4,5 mm<br />
Nr. 3625-733-2 180 x 8 x 28 x 8 x 2 mm, sonst wie vor, jedoch Stegmaß 6,5 mm<br />
Nr. 3625-735 180 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Aluplast Fl.: 100038; R.: 100027<br />
Nr. 3625-736 180 x 6 x 28 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Dimat Fl.: 621; R.: 610-3<br />
Nr. 3625-744 180 x 6 x 28 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Gromathic Fl.: GM 3005; R.: GM 3008<br />
Nr. 3625-755 180 x 8 x 32 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Komarek VI Fl.: FBI 163; R.: FBA 044<br />
Nr. 3625-757 180 x 8 x 30 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> ACCORD System 503<br />
Nr. 3625-758 180 x 8 x 28 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Vekaplast<br />
Nr. 3625-762 180 x 10 x 22 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Rehau Fl.: 560220; R.: 560490<br />
3625-703<br />
bis<br />
3625-762<br />
F 27
Profilsysteme Schließkasten und Schließbleche <strong>für</strong> Bolzen-Schwenkriegelkombination<br />
U-Profil-Schließbleche<br />
Nr. 3625-763 180 x 8 x 24 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> KBE Fl.: 112; R.: 102<br />
Nr. 3625-764 180 x 6 x 32 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Kömmerling und Plus Plan<br />
Nr. 3625-767 180 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> ACCORD Fl.: 900.222; R.: 503.601<br />
Nr. 3625-767-2 180 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Actual Fl.: 1508; R.: 1501<br />
Nr. 3625-767-3 180 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Actual Fl.: 1515; R.: 1501<br />
Nr. 3625-788 180 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> KBE, Lucobay, Spectus, Deceuninck und Stöckel<br />
Nr. 3625-788-1 wie vor, jedoch 180 x 8 x 28 x 4 x 2 mm,<br />
passend <strong>für</strong> KBE Fl.: 714; R.: 134<br />
Nr. 3625-799 wie Nr. 3625-706, jedoch 180 x 8 x 26 x 8 x 2 mm,<br />
mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Osmo Fl.: 2195; R.: 2171<br />
Nr. 3625-801 180 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Thyssen Fl.: H 4-9060; R.: L 3-0155<br />
Nr. 3625-802 180 x 10 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Actual System 300<br />
Nr. 3625-818 wie Nr. 3625-881, jedoch 180 x 8 x 28 x 13 x 2 mm,<br />
Anschraublöcher versetzt, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Kömmerling Eurodur 3S, Stegmaß 7 mm<br />
Nr. 3625-818-3 wie vor, jedoch Stegmaß 5,5 mm<br />
Nr. 3625-818-5 wie Nr. 3625-818, jedoch 180 x 8 x 32 x 13 x 2 mm,<br />
mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Primo FL.: 3383; R.: 3360<br />
Nr. 3625-821 180 x 8 x 32 x 12 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Marshall Tufflex Fl.: V 21-HS; R.: F 21-57<br />
Nr. 3625-847 180 x 6 x 30 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Plus Plan Fl.: FLR 120 E; R.: BLR 80 ED<br />
Nr. 3625-852 180 x 8 x 24 x 15 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Deceuninck Fl.: 1707; R.: 1703<br />
Nr. 3625-853 180 x 6 x 28 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> LB-Profile und ACCORD<br />
Nr. 3625-857 180 x 6 x 28 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Kömmerling Eurodur Gold Fl.: 1472; R.: 1461<br />
Nr. 3625-862 180 x 6 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> KBE Fl.: 714; R.: 112<br />
Nr. 3625-867 180 x 8 x 28 x 15 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Wymar Fl.: 2217; R.: 2003<br />
Nr. 3625-870 180 x 8 x 20 x 8 x 2 mm, mit von hinten verstellbaren<br />
Führungsbolzen und Endkappen, passend <strong>für</strong> Roplasto, Actual, Wymar<br />
und Scanorama<br />
Nr. 3625-873 180 x 6 x 28 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Vekaplast und Eurofen<br />
3625-763<br />
bis<br />
3625-873<br />
F 28
Profilsysteme Schließkasten und Schließbleche <strong>für</strong> Bolzen-Schwenkriegelkombination<br />
U-Profil-Schließbleche<br />
Nr. 3625-881 wie Nr. 3625-818, jedoch 180 x 6 x 28 x 11 x 2 mm,<br />
Anschraublöcher versetzt, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Kömmerling Eurodur 3 S Fl.: 1416; R.: 1402<br />
Nr. 3625-883 180 x 8 x 28 x 14 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Brügmann Fl.: HF 954; R.: HF 962<br />
Nr. 3625-886 180 x 6 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Rehau Fl.: 551060; R.: 551080<br />
Nr. 3625-891 180 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Salamander Fl.: 201040 (UF 4); R.: 206020 (US 2)<br />
Nr. 3625-898 180 x 8 x 28 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Eurofen Fl.: ZP 120; R.: L 65<br />
Nr. 3625-900 180 x 6 x 26 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Alphacan, Deceuninck und Thyssen<br />
Nr. 3625-906 180 x 7 x 28 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Salamander Fl.: 301040; R.: 206030<br />
Nr. 3625-907 180 x 6 x 28 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Deceuninck Fl.: 1807; R.: 1801<br />
Nr. 3625-910 180 x 7 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Status System Fl.: 907; R.: 904<br />
Nr. 3625-912 180 x 6 x 28 x 9 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Plastmo Fl.: 6035035; R.: 6035025<br />
Nr. 3625-915 180 x 6 x 32 x 10,5 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Rehau Serie 730 und Osmo Comtess S,<br />
Anschraublöcher versetzt, Maß von Außenkante Anschlagschenkel bis<br />
Mitte Schraubloch 24 mm<br />
Nr. 3625-915-1 wie vor, jedoch Anschraublöcher versetzt, Maß von Außenkante<br />
Anschlagschenkel bis Mitte Schraubloch 8 mm<br />
Nr. 3625-916 180 x 8 x 24 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Knipping 3000 Fl.: SK 3055; R.: SK 3022<br />
Nr. 3625-919 180 x 8 x 32 x 12 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Thyssen Fl.: H 40-9090; R.: L 60-0166<br />
Nr. 3625-919-01 wie vor, jedoch mit von hinten verstellbaren Führungsbolzen<br />
und Endkappen<br />
Nr. 3625-919-2 180 x 8 x 32 x 13 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Thyssen Fl.: H 3/13-9055; R.: L 6-0144<br />
Nr. 3625-926 180 x 8 x 26 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Actual Fl.: PA 1416; R.: PA 1402<br />
Nr. 3625-927 180 x 8 x 26 x 12,5 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Alphacan Profilia Fl.: PE613; R.: PE601<br />
Nr. 3625-939 180 x 8 x 28 x 15 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Lucobay Fl.: 53-08; R.: 53-21<br />
3625-881<br />
bis<br />
3625-939<br />
F 29
Profilsysteme Schließkasten und Schließbleche <strong>für</strong> Bolzen-Schwenkriegelkombination<br />
U-Profil-Schließbleche<br />
Nr. 3625-940 180 x 6 x 26 x 6 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Actual Fl.: P 1508; R.: P 1501<br />
Nr. 3625-941 180 x 8 x 28 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Aluplast und ACCORD<br />
Nr. 3625-945 180 x 8 x 32 x 12 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Plus Plan Fl.: FR 99 V; R.: BR 76<br />
Nr. 3625-947 180 x 8 x 32 x 12 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Rehau Fl.: 546210; R.: 546180<br />
Nr. 3625-948 180 x 8 x 32 x 12 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Gealan Fl.: 3076; R.: 3008<br />
Nr. 3625-954 180 x 8 x 32 x 15 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Explast Fl.: E 612; R.: E 600<br />
Nr. 3625-958 180 x 6 x 32 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Actual Fl.: 6031; R.: 6028<br />
Nr. 3625-963 180 x 8 x 30 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> ISO 60 Fl.: ISO 17; R.: ISO 1<br />
Nr. 3625-964 180 x 8 x 32 x 15 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Stöckel Eco Step Fl.: 2262; R.: 2113<br />
Nr. 3625-966 180 x 6 x 28 x 13,5 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Deceuninck Serie Mondiale Fl.: 2021; R.: 2410<br />
Nr. 3625-967 180 x 8 x 32 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Veka Matrix Fl.: 105.163; R.: 101.113<br />
Nr. 3625-968 180 x 8 x 32 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Veka Matrix Fl.: 103.169; R.: 101.113<br />
Nr. 3625-971 180 x 8 x 28 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> ACCORD Fl.: 503.629; R.: 503.601<br />
Nr. 3625-971-1 wie vor, jedoch 180 x 8 x 26 x 8 x 2 mm,<br />
passend <strong>für</strong> ACCORD Fl.: AP 005; R.: AP 001<br />
Nr. 3625-978 180 x 8 x 28 x 13 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Kömmerling-Tritec<br />
Nr. 3625-983 180 x 8 x 28 x 12 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Aluplast Fl.: GM 1530; R.: GR 1501<br />
Nr. 3625-985 180 x 8 x 32 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Veka Matrix Fl.: 105.165; R.: 101.108<br />
Nr. 3625-987 180 x 8 x 28 x 16 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Plastival Fl.: F 003; R.: F 006<br />
Nr. 3625-990 180 x 8 x 32 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Spectus Fl.: SW 709; R.: SW 705<br />
Nr. 3625-991 180 x 6 x 30 x 10 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Profile 22 Fl.: 2235; R.: 2238<br />
Nr. 3625-997 180 x 8 x 26 x 11 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Trocal Fl.: 120200; R.: 110100<br />
Nr. 3625-999 180 x 8 x 32 x 8 x 2 mm, mit Führungsbolzen und Endkappen,<br />
passend <strong>für</strong> Rehau Fl.: 541170; R.: 514029<br />
3625-940<br />
bis<br />
3625-999<br />
F 30
Profilsysteme Rollzapfen-Schließplatten<br />
Rollzapfen-Schließplatten<br />
Nr. 8050-01-18 70 x 18 x 6 mm<br />
Nr. 8050-01-20 70 x 20 x 6 mm<br />
Nr. 8050-01-24 70 x 24 x 6 mm<br />
Nr. 8050-01-24-8 70 x 24 x 8 mm<br />
Nr. 8050-01-26 70 x 26 x 6 mm<br />
Nr. 8050-601 wie vor, jedoch mit Führungszapfen<br />
Nr. 8050-02-18 70 x 18 x 2 mm<br />
Nr. 8050-02-20 70 x 20 x 2 mm<br />
Nr. 8050-02-24 70 x 24 x 2 mm<br />
Nr. 8050-02-26 70 x 26 x 2 mm<br />
Nr. 8050-05 90 x 20 mm<br />
Nr. 8050-05-2 zwei Unterlegstücke zur Schließplatte Nr.: 8050-05,<br />
<strong>für</strong> 8 mm hohe aufliegende Ausführung<br />
Nr. 8050-07 60 x 23 x 14 mm, passend <strong>für</strong> Kömmerling AV<br />
Nr. 8050-07-2 wie vor, jedoch mit angegossenen Führungszapfen,<br />
passend <strong>für</strong> Kömmerling, bei Fortfall der Füll-Leiste<br />
Nr. 8050-07-2-4 60 x 23 x 12 mm, passend <strong>für</strong> Deceuninck Fl.: P806; R.: 2100<br />
Nr. 8050-07-2-9 wie 8050-07-2, jedoch 60 x 23 x 14 mm<br />
Nr. 8050-07-2-11 60 x 23 x 10 mm, passend <strong>für</strong> Kömmerling<br />
Nr. 8050-07-2-12 60 x 23 x 9 mm, passend <strong>für</strong> LB-Profile Fl.: AZ5-2; R.: AL2-3<br />
Nr. 8050-07-2-15 60 x 23 x 9 mm, passend <strong>für</strong> Plastmo Fl.: 6035080; R.: 6035025<br />
Nr. 8050-07-2-18 60 x 23 x 13,5 mm, passend <strong>für</strong> Deceuninck Fl.: 2105; R.: 2100<br />
Nr. 8050-07-2-19 60 x 23 x 13 mm, passend <strong>für</strong> Deceuninck Fl.: 1707; R.: 1703<br />
Nr. 8050-07-2-20 60 x 23 x 9 mm, passend <strong>für</strong> Aluplast und ACCORD<br />
Nr. 8050-07-2-21 60 x 23 x 8 mm, passend <strong>für</strong> KBE Fl.: 715; R.: 106<br />
Nr. 8092-183 56 x 32 x 11 mm, passend <strong>für</strong> Brügmann AD, Achsmaß 20 mm<br />
Nr. 8092-601 56 x 15,5 x 9,5 mm, passend <strong>für</strong> Profen<br />
Nr. 8092-601-1 56 x 22 x 10 mm, passend <strong>für</strong> Trocal Fl.: 920100; R.: 910100<br />
Nr. 8092-602 56 x 15,5 x 10 mm, passend <strong>für</strong> Flugurit Fl.: Isop. Fl95; R.: Isop. Bl68<br />
Nr. 8092-604 56 x 15,5 x 10 mm, passend <strong>für</strong> Brügmann Serie 81<br />
Nr. 8092-605 56 x 15,5 x 11 mm, passend <strong>für</strong> Tehalit Fl.: M1180/1; R.: M1400<br />
Nr. 8092-606 56 x 15,5 x 10 mm, passend <strong>für</strong> Plastmo Fl.: 5032080; R.: 5032020<br />
Nr. 8092-607 56 x 15,5 x 11,5 mm, passend <strong>für</strong> Rehau<br />
8050-01-18<br />
8050-01-20<br />
8050-01-24<br />
8050-01-26<br />
8050-01-24-8<br />
8050-601 8050-02-18<br />
8050-02-20<br />
8050-02-24<br />
8050-02-26<br />
8050-05 8050-07<br />
8050-07-2<br />
bis<br />
8050-07-2-21<br />
8050-05-2<br />
8050-05-2<br />
8092-183<br />
bis<br />
8092-607<br />
F 31
Profilsysteme Rollzapfen-Schließplatten<br />
Rollzapfen-Schließplatten<br />
Nr. 8092-608 56 x 15,5 x 12 mm, passend <strong>für</strong> Rehau Fl.: 560220; R.: 608052<br />
Nr. 8092-610 56 x 22 x 10 mm, passend <strong>für</strong> Trocal Fl.: 925800; R.: 910700<br />
Nr. 8092-611 56 x 15,5 x 10 mm, passend <strong>für</strong> Helmitin Fl.: 4-60111; R.: 4-60087<br />
Nr. 8092-611-1 56 x 28,5 x 9 mm, passend <strong>für</strong> Stöckel Fl.: 1212; R.: 1111<br />
Nr. 8092-612 55 x 17 x 9 mm, passend <strong>für</strong> Isobelec<br />
Nr. 8092-613 56 x 17,7 x 11 mm, passend <strong>für</strong> Komarek<br />
Nr. 8092-614 56 x 15,5 x 10,0 mm, passend <strong>für</strong> Schock Thermassiv<br />
Nr. 8092-615 56 x 16,5 x 9 mm, passend <strong>für</strong> Plastival Fl.: F002; R.: F021<br />
Nr. 8092-617 56 x 15,5 x 11 mm, passend <strong>für</strong> Osmo Fl.: 2014; R.: 2017<br />
Nr. 8092-619 56 x 15,5 x 12 mm, passend <strong>für</strong> Aluplast Fl.: GF1030; R.: GF1301<br />
Nr. 8092-620 56 x 22 x 12 mm, passend <strong>für</strong> Thyssen Fl.: H4-9060; R.: L3-0155<br />
Nr. 8092-621 56 x 17,7 x 12 mm, passend <strong>für</strong> Polyval<br />
Nr. 8092-625 56 x 15,5 x 11,5 mm, passend <strong>für</strong> Salamander Fl.: 201040 (UF 4);<br />
R.: 200020 (UR 2)<br />
Nr. 8092-626 56 x 15,5 x 11,5 mm, passend <strong>für</strong> Salamander Fl.: 301040 (TF 13);<br />
R.: 200020 (UR 2)<br />
Nr. 8092-628 56 x 17 x 12 mm, passend <strong>für</strong> Kömmerling-Tritec Fl.: P1300; R.: P1113<br />
Nr. 8092-631 56 x 24 x 9 mm, passend <strong>für</strong> Veka Fl.: 105.081; R.: 101.086<br />
Nr. 8092-636 56 x 20 x 12 mm, passend <strong>für</strong> Deceuninck Fl.: P854; R.: 852<br />
Nr. 8092-642 56 x 17 x 11,5 mm, passend <strong>für</strong> F.A.L Fl.: P602; R.: P601<br />
Nr. 8092-643 56 x 15,5 x 11,5 mm, passend <strong>für</strong> F.A.L Fl.: P620; R.: P601<br />
Nr. 8092-645 56 x 15,5 x 14 mm, passend <strong>für</strong> KBE Fl.: 715 (alt); R.: 106<br />
Nr. 8092-647 56 x 15,5 x 11,3 mm, passend <strong>für</strong> Inefa<br />
Nr. 8092-655 56 x 20,5 x 15,5 mm, passend <strong>für</strong> Brügmann Fl.: HT020; R.: HT012<br />
Nr. 8092-658 56 x 20 x 12 mm, passend <strong>für</strong> Deceuninck Fl.: 812; R.: 852<br />
Nr. 8092-658-1 56 x 50 x 8,5 mm, passend <strong>für</strong> Brügmann Fl.: HF954; R.: 962<br />
Nr. 8092-669 56 x 16,5 x 10 mm, passend <strong>für</strong> Pural Fl.: P006; R.: P002<br />
Nr. 8092-673 56 x 20 x 15 mm, passend <strong>für</strong> Deceuninck Fl.: 855; R.: 404<br />
Nr. 8092-685 56 x 19,5 x 10 mm, passend <strong>für</strong> Aluplast Fl.: F4; R.: R3<br />
Nr. 8092-687 56 x 15,5 x 11,5 mm, passend <strong>für</strong> Gromathic Fl.: GM2601;<br />
R.: GM2408, Führung 12 mm<br />
Nr. 8092-687-1 wie vor, jedoch Führung 11 mm<br />
Nr. 8092-688 56 x 20 x 12 mm, passend <strong>für</strong> Helmitin Fl.: 4-60084; R.: 4-60111<br />
8092-608<br />
bis<br />
8092-688<br />
F 32
Profilsysteme Rollzapfen-Schließplatten<br />
Rollzapfen-Schließplatten<br />
Nr. 8092-689 56 x 22 x 13,5 mm, passend <strong>für</strong> Duraflex Fl.: TD1801; R.: TD1802<br />
Nr. 8092-690 56 x 20 x 15 mm, passend <strong>für</strong> Kömmerling Fl.: SP1232; R.: SP1249<br />
Nr. 8092-694 56 x 20 x 11 mm, passend <strong>für</strong> Coopre Fl.: GB202; R.: GB102<br />
Nr. 8092-707 56 x 20 x 11 mm, passend <strong>für</strong> Europlast Fl.: R7012; R.: 7000<br />
Nr. 8092-709 56 x 21 x 12 mm, passend <strong>für</strong> Actual Fl.: P1409; R.: P1402<br />
Nr. 8092-717 56 x 19 x 11 mm, passend <strong>für</strong> Pozzi Profilia Fl.: PK193; R.: PK123<br />
Nr. 8092-718 56 x 15,5 x 9 mm, passend <strong>für</strong> Pozzi Profilia Fl.: PK193; R.: PF089<br />
Nr. 8092-729 56 x 20 x 10 mm, passend <strong>für</strong> Knipping Fl.: SK3055; R.: SK3022<br />
Nr. 8092-731 56 x 22 x 14 mm, passend <strong>für</strong> Profile 22 Fl.: 2230; R.: 2207<br />
Nr. 8092-755 56 x 20 x 12 mm, passend <strong>für</strong> Komarek Fl.: FBI163; R.: FBA044<br />
Nr. 8092-767-2 56 x 19,5 x 9,5 mm, passend <strong>für</strong> Actual Fl.: P1508; R.: 1501<br />
Nr. 8092-788 56 x 20 x 12 mm, passend <strong>für</strong> KBE und Spectus Führung 16 mm<br />
Nr. 8092-818-1 56 x 20,5 x 12,5 mm, passend <strong>für</strong> Kömmerling Fl.: 1416; R.: 1402<br />
Nr. 8092-818-2 56 x 25,5 x 13 mm, passend <strong>für</strong> Kömmerling Fl.: 1415; R.: 1403<br />
Nr. 8092-818-5 56 x 25,5 x 13 mm, passend <strong>für</strong> Primo Fl.: 3383; R.: 3360<br />
Nr. 8092-867 56 x 25 x 15 mm, passend <strong>für</strong> Wymar Fl.: 2217; R.: 2003<br />
Nr. 8092-873 56 x 20 x 10 mm, passend <strong>für</strong> Veka Fl.: 103.122; R.: 101.118,<br />
Stegmaß 2,5 mm<br />
Nr. 8092-873-1 wie vor, jedoch Stegmaß 4 mm<br />
Nr. 8092-873-5 56 x 20 x 10 mm, passend <strong>für</strong> Eurofen Fl.: Z94; R.: L65<br />
Nr. 8092-898 56 x 20,5 x 12,5 mm, passend <strong>für</strong> Eurofen Fl.: ZP120; R.: L65<br />
Nr. 8092-915 56 x 20,5 x 11 mm, passend <strong>für</strong> Rehau Fl.: 541150 (T); R.:541120 (76)<br />
Nr. 8092-919 56 x 22,8 x 13 mm, passend <strong>für</strong> Thyssen Fl.: H4; R.: L6<br />
Nr. 8092-945 56 x 20,5 x 12,5 mm, passend <strong>für</strong> Plus Plan Fl.: FR99V, R.: BR76<br />
Nr. 8092-948 56 x 25,5 x 12 mm, passend <strong>für</strong> Gealan Fl.: 3076; R.: 3008<br />
Nr. 8092-958 56 x 20,5 x 12,5 mm, passend <strong>für</strong> Actual Fl.: 6031; R.: 6028<br />
Nr. 8092-963 56 x 20 x 11,5 mm, passend <strong>für</strong> ISO 60 Fl.: ISO 17; R.: ISO 1<br />
Nr. 8092-964 56 x 20,5 x 11,5 mm, passend <strong>für</strong> Stöckel Fl.: 2262; R.: 2113<br />
Nr. 8092-966 56 x 25,5 x 15,5 mm, passend <strong>für</strong> Deceuninck Fl.: 2020; R.: 2000<br />
Nr. 8092-999 56 x 20,5 x 11,5 mm, passend <strong>für</strong> Rehau Fl.: 541170 (T94); R.: 514029<br />
8092-689<br />
bis<br />
8092-999<br />
F 33
Profilsysteme Bandseiten-Sicherungen<br />
Bandseiten-Sicherungen<br />
Nr. 8041-03-24 Keilsperr-Sicherung, bestehend aus zwei gleichförmigen<br />
verzahnten Sperrelementen 100 x 24 x 3 mm,<br />
Funktion: durch die Kreisbogen-Bewegung um den Drehpunkt<br />
des Bandes verbinden sich selbsttätig die zwei keilförmigen<br />
Einzelelemente zu einer <strong>for</strong>m- und kraftschlüssigen Einheit.<br />
Nr. 8041-580 Keilsperr-Sicherung,<br />
Feststellstück <strong>für</strong> Stahlzarge, wie vor, jedoch 100 x 24 x 2 mm.<br />
Nr. 8042-03-24 wie vor, jedoch bestehend aus:<br />
1 verzahntes Sperrelement 100 x 24 x 3 mm ohne und<br />
1 verzahntes Sperrelement 100 x 24 x 3 mm mit<br />
angegossenem Kasten, verstellbar (Ausfräsung <strong>für</strong> Kasten<br />
er<strong>for</strong>derlich), mit Innensechskant-Verstellschraube SW 4<br />
Nr. 8042-06-20-2 Keilsperr-Sicherung,<br />
Verstellstück <strong>für</strong> Türblatt, wie vor, jedoch 100 x 24 x 2 mm.<br />
Nr. 8042-06-24 wie vor, jedoch 100 x 24 x 6 mm<br />
Nr. 8042-08-24 wie vor, jedoch 100 x 24 x 8 mm<br />
Nr. 8042-003 wie vor, jedoch 100 x 21 x 3 mm und 100 x 24 x 3 mm,<br />
passend <strong>für</strong> Thyssen Fl.: H4-9060; R.: L2-0143<br />
Nr. 8042-004 wie vor, jedoch 100 x 24 x 8 mm und 100 x 24 x 8 mm,<br />
passend <strong>für</strong> Home Fl.: FHT 115; R.: B 80<br />
Nr. 8042-007 wie vor, jedoch 100 x 24 x 8 mm und 100 x 24 x 8 mm,<br />
passend <strong>für</strong> Kömmerling Fl.: 3022; R.: 3012<br />
Nr. 8042-011 wie vor, jedoch 100 x 21 x 8 mm und 100 x 24 x 3 mm,<br />
passend <strong>für</strong> Roplasto Fl.: 6185; R.: 6191<br />
Nr. 8042-012 wie vor, jedoch 100 x 21 x 8 mm und 100 x 24 x 3 mm,<br />
passend <strong>für</strong> Rehau Fl.: 560220; R.:608052<br />
Nr. 8042-013 wie vor, jedoch 100 x 21 x 8 mm und 100 x 24 x 3 mm,<br />
passend <strong>für</strong> Veka Fl.: 105.014; R.: 101.019<br />
Nr. 8042-014 wie vor, jedoch 100 x 21 x 8 mm und 100 x 24 x 3 mm,<br />
passend <strong>für</strong> Veka Fl.: 105.013; R.: 101.018<br />
Nr. 8042-015 wie vor, jedoch 100 x 21 x 8 mm und 100 x 24 x 3 mm,<br />
passend <strong>für</strong> Aluplast Fl.: GF1030; R.: GR1001<br />
Nr. 8042-017 wie vor, jedoch 100 x 21 x 8 mm und 100 x 24 x 6 mm,<br />
passend <strong>für</strong> KBE Fl.: 714 (alt); R.: 106<br />
Nr. 8042-018 wie vor, jedoch 100 x 24 x 8 mm und 100 x 24 x 3 mm,<br />
passend <strong>für</strong> Deceuninck Fl.: 854; R.: 852<br />
Nr. 8042-023 wie vor, jedoch 100 x 21 x 8 mm und 100 x 24 x 3 mm,<br />
passend <strong>für</strong> Deceuninck Fl.: 812; R.: 852<br />
Nr. 8042-025 wie vor, jedoch 100 x 21 x 8 mm und 100 x 24 x 3 mm,<br />
passend <strong>für</strong> Deceuninck Fl.: 855; R.: 801<br />
Nr. 8042-026 wie vor, jedoch 100 x 24 x 8 mm und 100 x 24 x 8 mm,<br />
passend <strong>für</strong> Gealan Fl.: 3076; R.: 3008<br />
Nr. 8042-027 wie vor, jedoch 100 x 21 x 8 mm und 100 x 24 x 6 mm,<br />
passend <strong>für</strong> Thyssen Fl.: H4-9060; R.: L3-0155<br />
Nr. 8042-028 wie vor, jedoch 100 x 21 x 8 mm und 100 x 24 x 3 mm,<br />
passend <strong>für</strong> Europlast Fl.: R7012; R.: R7000<br />
8041-03-24<br />
8042-06-20-2<br />
8042-003<br />
bis<br />
8042-028<br />
8041-580<br />
8042-03-24<br />
8042-06-24<br />
8042-08-24<br />
F 34
Profilsysteme Bandseiten-Sicherungen<br />
Bandseiten-Sicherungen<br />
Nr. 8042-029 wie vor, jedoch 100 x 24 x 8 mm und 100 x 24 x 8 mm,<br />
passend <strong>für</strong> Plus Plan Fl.: FLR 120 E; R.: BLR 80 ED<br />
Nr. 8042-031 wie vor, jedoch 100 x 21 x 6 mm und 100 x 20 x 6 mm,<br />
passend <strong>für</strong> Brügmann Fl.: HF403; R.: 431<br />
Nr. 8042-039 wie vor, jedoch 100 x 21 x 8 mm und 100 x 24 x 3 mm,<br />
passend <strong>für</strong> Gromathic Fl.: GM2601; R.: GM2408<br />
Nr. 8042-045 wie vor, jedoch 100 x 24 x 8 mm und 100 x 24 x 8 mm,<br />
passend <strong>für</strong> Veka Fl.: 105.081; R.: 101.094<br />
Nr. 8042-046 wie vor, jedoch 100 x 24 x 8 mm und 100 x 24 x 6 mm,<br />
passend <strong>für</strong> Brügmann Fl.: HT20; R.: HT10<br />
Nr. 8042-047 wie vor, jedoch 100 x 24 x 8 mm und 100 x 24 x 3 mm,<br />
passend <strong>für</strong> Helmitin Fl.: 4-60084; R.: 4-60067<br />
Nr. 8042-048 wie vor, jedoch 100 x 18 x 8 mm und 100 x 24 x 3 mm,<br />
passend <strong>für</strong> Stöckel Fl.: 1212; R.: 1111<br />
Nr. 8042-050 wie vor, jedoch 100 x 24 x 8 mm und 100 x 20 x 6 mm,<br />
passend <strong>für</strong> Rehau Fl.: 541150; R.: 541060<br />
Nr. 8042-051 wie vor, jedoch 100 x 21 x 8 mm und 100 x 24 x 3 mm,<br />
passend <strong>für</strong> Osmo Fl.: 2014; R.: 2017<br />
Nr. 8042-053 wie vor, jedoch 100 x 24 x 8 mm und 100 x 22 x 8 mm,<br />
passend <strong>für</strong> Kömmerling Fl.: SP 3022; R.: 1254<br />
Nr. 8042-056 wie vor, jedoch 100 x 24 x 8 mm und 100 x 24 x 3 mm,<br />
passend <strong>für</strong> Thyssen Fl.: H40-9090; R.: L60-166<br />
Nr. 8042-060 wie vor, jedoch 100 x 24 x 8 mm und 100 x 24 x 8 mm,<br />
passend <strong>für</strong> Gromathic Fl.: 3121; R.: 3128<br />
Nr. 8042-062 wie vor, jedoch 100 x 24 x 8 mm und 100 x 24 x 6 mm,<br />
passend <strong>für</strong> Plus Plan Fl.: FR99V; R.: BR76<br />
Nr. 8042-063 wie vor, jedoch 100 x 22 x 6 mm und 100 x 24 x 8 mm,<br />
passend <strong>für</strong> Trocal Fl.: 920500; R.: 910700<br />
Nr. 8042-064 wie vor, jedoch 100 x 20 x 5 mm und 100 x 24 x 8 mm,<br />
passend <strong>für</strong> Trocal Fl.: 920700; R.: 910100<br />
Nr. 8042-065 wie vor, jedoch 100 x 21 x 8 mm und 100 x 24 x 6 mm,<br />
passend <strong>für</strong> Salamander Fl.: 201040 (UF4); R.: 200020 (UR2) mit<br />
SL68537 (beschnitten)<br />
Nr. 8042-069 wie vor, jedoch 100 x 24 x 8 mm und 100 x 24 x 3 mm,<br />
passend <strong>für</strong> Plastmo Fl.: 6035080; R.: 6035025<br />
Nr. 8042-071 wie vor, jedoch 100 x 24 x 8 mm und 100 x 24 x 8 mm,<br />
passend <strong>für</strong> Stöckel Fl.: 2262; R.: 2113<br />
Nr. 8042-073 wie vor, jedoch 100 x 24 x 8 mm und 100 x 24 x 3 mm,<br />
passend <strong>für</strong> Actual Fl.: 6031; R.: 6028<br />
Nr. 8042-087 wie vor, jedoch 100 x 24 x 8 mm und 100 x 24 x 6 mm,<br />
passend <strong>für</strong> Osmo Comtess S Fl.: 2544; R.: 2534<br />
Nr. 8042-089 wie vor, jedoch 100 x 24 x 8 mm und 100 x 24 x 3 mm,<br />
passend <strong>für</strong> Kömmerling Fl.: 3023; R.: 3012<br />
Nr. 8042-090 wie vor, jedoch 100 x 24 x 8 mm und 100 x 24 x 6 mm,<br />
passend <strong>für</strong> Kömmerling Fl.: 3051; R.: 3012<br />
8042-029<br />
bis<br />
8042-090<br />
F 35
Profilsysteme Schließleisten<br />
Schließleisten – Lieferung auf Anfrage<br />
Für Profilsysteme empfehlen wir<br />
U-Profil-, Flach- oder Winkel-Leisten (Winkel<strong>for</strong>m wie Serie 20), einteilig,<br />
Durchbrüche <strong>für</strong> Falle, Riegel und <strong>für</strong> Zusatz-Verriegelungen hinterfüttert,<br />
passend zum jeweiligen Profilsystem sowie <strong>für</strong> Türverriegelungen AS 2300,<br />
AS 2500 oder AS 2600 in Standardmaßen.<br />
D = Durchgehende Leisten<br />
M = Mehrteilige Leisten<br />
Bestell-Beispiel:<br />
passend <strong>für</strong> AS 2300/4350 AS 2500 AS 2600<br />
↕ ↕ ↕<br />
U-Profil-Leiste Nr. D 2530- . . . , Nr. D 2550- . . . , Nr. D 2560- . . .<br />
Flach-Leiste Nr. D 2630- . . . , Nr. D 2650- . . . , Nr. D 2660- . . .<br />
Winkel-Leiste Nr. D 2030- . . . , Nr. D 2050- . . . , Nr. D 2060- . . .<br />
Ferner lieferbar:<br />
Schließleisten passend <strong>für</strong> Verriegelungen mit Sonderabmessungen (W-Ausführungen o.ä.)<br />
und <strong>für</strong> andere Verriegelungstypen.<br />
Ab 22 mm Breite:<br />
– mit Lochung <strong>für</strong> E-Öffner und montiertem, zum Profilsystem passenden AT-Stück -<br />
Artikel-Nr. mit Zusatzbezeichnung E - z.B. Nr. D 2530- . . . E<br />
– mit regulierbarem Andruck durch verstellbaren Gusskasten -<br />
Artikel-Nr. mit Zusatzbezeichnung G - z.B. Nr. D 2530- . . . EG<br />
– mit verstellbarem Sperrbügel <strong>für</strong> Türspalt-Sicherung -<br />
Artikel-Nr. mit Zusatzbezeichnung T - z.B. Nr. D 2530- . . . EGT<br />
Eine Anpassung der Schließleisten an die Bodenschwellen verschiedener Hersteller ist möglich;<br />
sie ist im Auftrag mit Angabe des Herstellers vorzuschreiben.<br />
D 2530-...EG<br />
D 2530-...EGT<br />
D 2630-...EG<br />
D 2630-...EGT<br />
D 2030-...EG<br />
D 2030-...EGT<br />
F 36
<strong>Zubehör</strong><br />
G 1- 2<br />
G 3- 5<br />
G 6<br />
G 6<br />
G 7<br />
G 8<br />
G 9<br />
G 10-11<br />
Austauschstücke <strong>für</strong> Schließbleche mit Lochung <strong>für</strong> E-Öffner<br />
Schließkästen und Schließbleche <strong>für</strong> vertikale Bolzenverriegelung<br />
Schließbleche <strong>für</strong> Pendeltüren<br />
Riegel-Schließbleche Serie 130<br />
Schließblech-Hinterfütterungen<br />
Ausgleichsstulpen<br />
Zusatzteile / Montagehilfen<br />
Stulpflügelbeschläge / Kantriegel<br />
G
<strong>Zubehör</strong> Austauschstücke passend <strong>für</strong> Schließbleche mit E-Öffner-Lochung<br />
Nr. 115 Fallen-Anschlagsteg 9 mm hoch, 3,5 mm breit<br />
Nr. 115 M wie vor, jedoch mit Messing-Oberteil <strong>für</strong> stark frequentierte Türen<br />
Nr. 115-1 wie Nr. 115, jedoch Oberteil 2 mm nach hinten versetzt<br />
Nr. 115-4 wie Nr. 115, jedoch Fallen-Anschlagsteg 14 mm hoch<br />
Nr. 115-5 wie Nr. 115, jedoch Fallen-Anschlagsteg 7,5 mm breit<br />
Nr. 115-5-1 wie Nr. 115, jedoch Fallen-Anschlagsteg 6,5 mm breit<br />
Nr. 115-5-2 wie Nr. 115, jedoch Fallen-Anschlagsteg 5,5 mm breit<br />
Nr. 115-5-3 wie Nr. 115, jedoch Fallen-Anschlagsteg 4,5 mm breit<br />
Nr. 115-6 wie Nr. 115-5, jedoch Fallen-Anschlagsteg 9,5 mm breit,<br />
verlängert zur Abdeckung der E-Öffner-Ausfräsung bei Profiltüren<br />
Nr. 115-6-1 wie Nr. 115-6, jedoch Fallen-Anschlagsteg 8,5 mm breit<br />
Nr. 115-6-2 wie Nr. 115-6, jedoch Fallen-Anschlagsteg 7,5 mm breit<br />
Nr. 115-13 passend <strong>für</strong> Schließblech 20-520 E<br />
Nr. 115-15 passend <strong>für</strong> Schließbleche Nr. 20-563 E, 20-570 E, 8050-572 E<br />
Nr. 115-16 passend <strong>für</strong> Schließbleche Nr. 15-502 E, 15-503 E u. 15-513 E<br />
Nr. 115-18 passend <strong>für</strong> Schließbleche Nr. 20-531 E und 8050-532 E<br />
Nr. 115-22 passend <strong>für</strong> Schließbleche "System 13", "System Nova 15" und <strong>für</strong> Nr. 9 E<br />
Nr. 115-24 passend <strong>für</strong> Schließblech Nr. 25-511 E<br />
Nr. 115-212 passend <strong>für</strong> Schließblech Nr. 25-212 E<br />
Nr. 115-512 passend <strong>für</strong> Schließblech Nr. 25-512 E<br />
115<br />
bis<br />
115-512<br />
G 1
<strong>Zubehör</strong> Austauschstücke Fallen-Anschlag verstellbar, austauschbar gegen E-Öffner<br />
Nr. 116-06 75 x 20 x 6 mm, Fallen-Anschlagsteg 6 mm hoch, 3,5 mm breit<br />
Nr. 116-06 M wie vor, jedoch mit Messing-Oberteil <strong>für</strong> stark frequentierte Türen<br />
Nr. 116-06-1 wie Nr. 116-06, jedoch Fallen-Anschlagsteg 2,5 mm breit<br />
Nr. 116-06-2 wie Nr. 116-06, jedoch Fallen-Anschlagsteg 9 mm hoch<br />
Nr. 116-06-4 wie Nr. 116-06-2, jedoch 75 x 17 x 6 mm<br />
Nr. 116-06-5 wie Nr. 116-06, jedoch 75 x 22 x 6 mm, Fallen-Anschlagsteg 5,5 mm breit,<br />
bündig zur Schließblech-Vorderkante, <strong>für</strong> 13 mm Achsmaß<br />
Nr. 116-06-5-1 wie vor, jedoch 75 x 21 x 6 mm<br />
Nr. 116-06-6 wie Nr. 116-06, jedoch Fallen-Anschlagsteg 7 mm breit<br />
Nr. 116-06-8 wie Nr. 116-06, jedoch 75 x 26 x 6 mm, Fallen-Anschlagsteg 11 mm breit,<br />
bündig zur Schließblech-Vorderkante, <strong>für</strong> 17 mm Achsmaß<br />
Nr. 116-06-8-1 passend <strong>für</strong> Schließblech Nr. 20-531 E, Fallen-Anschlagsteg 11,3 mm breit<br />
Nr. 116-06-8-2 passend <strong>für</strong> Schließblech Nr. 20-531 E, Fallen-Anschlagsteg 8,5 mm breit<br />
Nr. 116-06-10 wie 116-06-8, jedoch Fallen-Anschlagsteg 9 mm breit, <strong>für</strong> Achsmaß 15 mm<br />
Nr. 116-08 75 x 20 x 8 mm, Fallen-Anschlagsteg 8 mm hoch, 3,5 mm breit<br />
Nr. 116-08 M wie vor, jedoch mit Messing-Oberteil <strong>für</strong> stark frequentierte Türen<br />
Nr. 116-08-1 wie Nr. 116-08, jedoch Fallen-Anschlagsteg 2,5 mm breit<br />
Nr. 116-08-2 wie Nr. 116-08, jedoch Fallen-Anschlagsteg 11 mm hoch<br />
Nr. 116-08-5 wie Nr. 116-08, jedoch 75 x 22 x 8 mm, Fallen-Anschlagsteg 5,5 mm breit,<br />
bündig zur Schließblech-Vorderkante <strong>für</strong> 13 mm Achsmaß<br />
Nr. 116-08-6 wie Nr. 116-08, jedoch Fallen-Anschlagsteg 7 mm breit<br />
Nr. 116-10 75 x 20 x 10 mm, Fallen-Anschlagsteg 10 mm hoch, 3,5 mm breit<br />
Nr. 116-10-2 wie Nr. 116-10, jedoch Fallen-Anschlagsteg 13 mm hoch<br />
Nr. 116-10-3 wie Nr. 116-10, jedoch 75 x 18 x 10 mm<br />
116-06<br />
bis<br />
116-10-3<br />
G 2
<strong>Zubehör</strong> <strong>für</strong> vertikale Bolzen-Verriegelung bei zweiflügeligen Holz- oder Profiltüren<br />
Standflügel: Türverriegelung mit vertikaler Verriegelung oder Kantriegel<br />
Gangflügel: Türverriegelung mit horizontaler Verriegelung<br />
Schließkästen<br />
Nr. 6391-01-18 48 x 18 x 8,5 x 25 mm käntig, mit Topf<br />
Nr. 6391-01-20 wie vor, jedoch 48 x 20 x 8,5 x 25 mm<br />
Nr. 6391-03-18 48 x 18 x 8,5 mm, käntig<br />
Nr. 6391-03-20 wie vor, jedoch 48 x 20 x 8,5 mm<br />
Nr. 6392-03-18 48 x 18 x 8,5 mm, zum Einfräsen<br />
Nr. 6392-03-20 wie vor, jedoch 48 x 20 x 8,5 mm<br />
Nr. 6392-05-18 48 x 18 x 8,5 x 25 mm zum Einfräsen, mit Topf<br />
Nr. 6392-05-20 wie vor, jedoch 48 x 20 x 8,5 x 25 mm<br />
Schließbleche<br />
Nr. 2330-03-18 Flach-Schließblech, 100 x 18 x 3 mm, käntig<br />
Nr. 2330-03-18 R wie vor, 100 x 18 x 3 mm, abgerundet<br />
Nr. 2330-03-20 wie vor, 100 x 20 x 3 mm, käntig<br />
Nr. 2330-03-20 R wie vor, 100 x 20 x 3 mm, abgerundet<br />
Nr. 2330-03-24 wie vor, 100 x 24 x 3 mm, käntig<br />
Nr. 2330-03-24 R wie vor, 100 x 24 x 3 mm, abgerundet<br />
Nr. 7320-... Winkel-Schließblech, äußere Abmessungen wie Serie 2320-...,<br />
Mindestbestellmenge 50 Stück<br />
Nr. 7325-... U-Profil-Schließblech, äußere Abmessungen wie Serie 2325-...,<br />
Mindestbestellmenge 50 Stück<br />
Bodenbuchse<br />
Nr. 8028 33 mm hoch, 17,5 mm Ø, mit Bund 19 x 2 mm<br />
6391-01-18<br />
6391-01-20<br />
6392-03-18<br />
6392-03-20<br />
2330-03-18<br />
bis<br />
2330-03-24 R<br />
6391-03-18<br />
6391-03-20<br />
6392-05-18<br />
6392-05-20<br />
7320-...<br />
7325-... 8028<br />
G 3
<strong>Zubehör</strong> <strong>für</strong> vertikale Bolzen-Verriegelung bei zweiflügeligen Holz- oder Profiltüren<br />
Standflügel: Türverriegelung mit vertikaler Verriegelung oder Kantriegel<br />
Gangflügel: Türverriegelung mit vertikaler und horizontaler Verriegelung<br />
Schließkästen*<br />
Nr. 6391-02-18 81 x 18 x 8,5 x 25 mm käntig, mit Topf<br />
Nr. 6391-02-20 wie vor, jedoch 81 x 20 x 8,5 x 25 mm<br />
Nr. 6391-04-18 81 x 18 x 8,5 mm käntig<br />
Nr. 6391-04-20 wie vor, jedoch 81 x 20 x 8,5 mm<br />
Nr. 6392-02-18 81 x 18 x 8,5 x 25 mm zum Einfräsen, mit Topf<br />
Nr. 6392-02-20 wie vor, jedoch 81 x 20 x 8,5 x 25 mm<br />
Nr. 6392-04-18 81 x 18 x 8,5 mm zum Einfräsen<br />
Nr. 6392-04-20 wie vor, jedoch 81 x 20 x 8,5 mm<br />
* Beim Anschlag muss das in den nebenstehenden Abbildungen angegebene Maß von 24 mm<br />
berücksichtigt werden.<br />
Einsetzbar sind ferner die auf Seite H 3 beschriebenen Schließteile, wobei ebenfalls der Abstand der<br />
vertikal ausschließenden Bolzen sowie die Falzluft zwischen Stand- und Gangflügel zu beachten<br />
sind.<br />
6391-02-18<br />
6391-02-20<br />
6392-02-18<br />
6392-02-20<br />
6391-04-18<br />
6391-04-20<br />
6392-04-18<br />
6392-04-20<br />
G 4
<strong>Zubehör</strong> <strong>für</strong> vertikale Bolzen-Verriegelung bei zweiflügeligen Holz- oder Profiltüren<br />
Schließkasten<br />
Nr. 6392-01-20 55 x 20 x 8,5 mm zum Einfräsen<br />
Schließbleche<br />
Nr. 6330-03-18 Flach-Schließblech, abgewinkelt, 50/90 x 18 x 3 mm, Nirosta<br />
Nr. 6330-03-20 wie vor, jedoch 50/90 x 20 x 3 mm<br />
Nr. 6330-03-24 wie vor, jedoch 50/90 x 24 x 3 mm<br />
Nr. 6325-... U-Profil-Schließblech, abgewinkelt, 51,5 x 88,5 mm (innen),<br />
äußere Abmessungen wie Nr. 2325-...<br />
Mindestbestellmenge 50 Stück<br />
6392-01-20<br />
6330-03-18<br />
6330-03-20<br />
6330-03-24<br />
6325-...<br />
G 5
<strong>Zubehör</strong> Schließbleche<br />
Schließbleche <strong>für</strong> Pendeltüren<br />
<strong>für</strong> Türverriegelungen mit Rollfalle 14 mm Ø:<br />
Nr. 188 Flach-Schließblech, 230 x 24 x 2 mm, mit Mulde<br />
ferner:<br />
Fallen-Riegel-Schließbleche in der zum jeweiligen Türsystem passenden<br />
Standard-Ausführung<br />
<strong>für</strong> Türverriegelungen mit Rollfalle 11,6 mm Ø:<br />
Fallen-Riegel-Schließbleche <strong>für</strong> Profilsysteme mit Hinterfütterungen Nr. 25-27-2*<br />
oder 25-27-3*, siehe auch Seite G 7.<br />
Schließblech-Artikel-Nr. mit Zusatzbezeichnung ”P”<br />
!<br />
* Eine einwandfreie Funktion der Rollfalle mit 11,6 mm Ø ist nur bei Einsatz dieser<br />
Spezial-Hinterfütterungen im Fallen-Durchbruch der Schließbleche gewährleistet.<br />
Schließbleche <strong>für</strong> Riegelschlösser<br />
Nr. 130-03-20 Flach-Schließblech, 120 x 20 x 3 mm käntig<br />
Nr. 130-03-24 wie vor, jedoch 120 x 24 x 3 mm käntig<br />
188<br />
130-03-20<br />
130-03-24<br />
Fallendurchbruch<br />
hinterfüttert mit<br />
Nr. 25-27-2<br />
oder<br />
Nr. 25-27-3<br />
G 6
<strong>Zubehör</strong> Schließblech-Hinterfütterungen<br />
Kunststoffkästen<br />
Schließblech-Artikelnummer mit Zusatzbezeichnung "H"<br />
Nr. 25-20-2 * <strong>für</strong> Fallen-, Riegel- oder Schwenkriegel-Durchbruch bei 2 mm starken<br />
Schließblechen <strong>für</strong> Profil-Systeme, Einbautiefe 16,5 mm<br />
Nr. 25-20-3 * wie vor, jedoch <strong>für</strong> 3 mm starke Schließbleche <strong>für</strong> Profilsysteme<br />
Nr. 2325-20-2 * <strong>für</strong> Rundbolzen-Durchbruch, sonst wie Nr. 25-20-2<br />
Nr. 2325-20-3 * <strong>für</strong> Rundbolzen-Durchbruch, sonst wie Nr. 25-20-3<br />
Nr. 3625-20-2 <strong>für</strong> Bolzen-Schwenkriegel-Durchbruch, Einbautiefe 20 mm,<br />
sonst wie Nr. 25-20-2<br />
Nr. 3625-20-3 <strong>für</strong> Bolzen-Schwenkriegel-Durchbruch, Einbautiefe 20 mm,<br />
sonst wie Nr. 25-20-3<br />
Nr. 25-22-2 <strong>für</strong> Riegel-Durchbruch bei 2 mm starken Schließblechen<br />
<strong>für</strong> Profil-Systeme, Einbautiefe 22 mm<br />
Nr. 25-30-2 <strong>für</strong> Fallen- und Riegel-Durchbruch bei 2 mm starken Schließblechen<br />
<strong>für</strong> Profil-Systeme, Einbautiefe 22 mm<br />
Nr. 25-30-3 wie vor, jedoch <strong>für</strong> 3 mm starke Schließbleche <strong>für</strong> Profilsysteme<br />
Nr. 25-22-3 wie vor, jedoch <strong>für</strong> 3 mm starke Schließbleche <strong>für</strong> Profil-Systeme<br />
Nr. 25-28-2 einseitig offen, <strong>für</strong> Fallen-, Riegel- oder Schwenkriegel-Durchbruch<br />
bei 2 mm starken Schließblechen <strong>für</strong> Profil-Systeme<br />
mit geringem Achsmaß, Einbautiefe 19 mm<br />
Nr. 2325-28-2 <strong>für</strong> Rundbolzen-Durchbruch, sonst wie vor<br />
* Bei Einsatz dieser Hinterfütterung ist eine Mindestfalzluft von 3 mm er<strong>for</strong>derlich!<br />
Stahlblechkasten<br />
Schließblech-Artikelnummer mit Zusatzbezeichnung "HS"<br />
Nr. 25-21 <strong>für</strong> Fallen- oder Riegel-Durchbruch<br />
bei 2 oder 3 mm starken Schließblechen<br />
Spezial-Hinterfütterungen<br />
<strong>für</strong> Pendeltür-Schließbleche<br />
einzusetzen bei Türverriegelungen mit Rollfalle 11,6 mm Ø – siehe auch Seite G 6<br />
Schließblech-Artikel-Nummern mit Zusatzbezeichnung ”P”<br />
Nr. 25-27-2 Kunststoffkasten <strong>für</strong> Fallen-Durchbruch bei 2 mm starken<br />
Schließblechen <strong>für</strong> Profilsysteme<br />
Nr. 25-27-3 wie vor, jedoch <strong>für</strong> 3 mm starke Schließbleche <strong>für</strong> Profilsysteme<br />
25-20-2<br />
25-20-3<br />
3625-20-2<br />
3625-20-3<br />
25-30-2<br />
25-30-3<br />
25-28-2 2325-28-2<br />
25-21<br />
am Schließblech<br />
angeschweißter<br />
Stahlblechkasten<br />
Nr. 25-21<br />
25-22-2<br />
25-22-3<br />
2325-20-2<br />
2325-20-3<br />
25-27-2<br />
25-27-3<br />
G 7
<strong>Zubehör</strong> Ausgleichsstulpen/Stulpverlängerungen ohne Verriegelungselement *<br />
Flach-Stulpen<br />
Nr. 8035-45-F-16 400 x 16 x 3 mm<br />
Nr. 8035-45-F-18 400 x 18 x 3 mm<br />
Nr. 8035-45-F-20 400 x 20 x 3 mm<br />
Nr. 8035-45-F-24 400 x 24 x 3 mm<br />
Nr. 8035-45-F-30 400 x 30 x 3 mm<br />
Nr. 7033-F-16 Zwischenstück 250 x 16 x 3 mm<br />
<strong>für</strong> Stulpverlängerung der Türverriegelungen<br />
Serie 6000 und 7000<br />
Nr. 7033-F-20 wie vor, jedoch 250 x 20 x 3 mm<br />
U-Profil-Stulpen<br />
Nr. 8035-45-P-6-22 400 x 6 x 22 x 6 x 2 mm<br />
Nr. 8035-45-P-8-22 400 x 8 x 22 x 8 x 2 mm<br />
Nr. 8035-45-P-6-24 400 x 6 x 24 x 6 x 2 mm<br />
Nr. 8035-45-P-8-24 400 x 8 x 24 x 8 x 2 mm<br />
* Anschlussstulpen mit Verriegelungselement siehe <strong>Katalog</strong> A-2<br />
8035-45-F-16<br />
bis<br />
8035-45-F-30<br />
8035-45-P-6-22<br />
bis<br />
8035-45-P-8-24<br />
7033-F-16<br />
7033-F-20<br />
G 8
<strong>Zubehör</strong> Spezial-Zusatzteile/Montagehilfen<br />
Nr. 140-2 Distanzplatte, 75 x 24 x 2 mm, verzinkt,<br />
als Ausgleich zwischen E-Öffner und Abdeckplatte Nr. 141<br />
Nr. 140-3 wie vor, jedoch 75 x 24 x 3 mm<br />
Nr. 141 Abdeckplatte, <strong>für</strong> E-Öffner, 85 x 33 x 0,8 mm,<br />
Nirosta matt gebürstet<br />
Nr. 170 Stulp-Abdeckkappe, Kunststoff weiß, braun oder schwarz,<br />
<strong>für</strong> Türverriegelung mit 16 mm Flachstulp<br />
Nr. 170-1 wie vor, <strong>für</strong> Profil Thyssen H30/H40 bei Einsatz von Eckverbindern<br />
Nr. 171 wie vor, <strong>für</strong> Türverriegelung mit 20 mm Flachstulp<br />
Nr. 173 wie vor, <strong>für</strong> Türverriegelung mit 30 mm Flachstulp<br />
Nr. 970-2 Abstützzapfen, Ø 18 x 80 mm, verzinkt und gelb chromatiert,<br />
zur Abstützung der Zusatz-Schlösser<br />
Nr. 2200-007-10 Abstützplatte, 130 x 45 x 5 mm, verzinkt und gelb chromatiert,<br />
zur Abstützung der Zusatz-Schlösser<br />
Nr. 8070-1 Montagehilfe, Kunststoff, zur Fixierung der Falzluft (4 mm) -<br />
wird in den Stulp-Durchbruch <strong>für</strong> die Zylinderbefestigungsschraube<br />
eingeklipst<br />
Nr. 8200 Neubautenschlüssel, Kunststoff schwarz<br />
140-2<br />
140-3<br />
170<br />
170-1<br />
171<br />
141<br />
173<br />
970-2 2200-007-10<br />
8070-1 8200<br />
G 9
<strong>Zubehör</strong> Stulpflügelbeschläge<br />
Stulpflügelbeschlag Serie 504-1 / 230 / 280 / 733-2<br />
Ausführung <strong>für</strong> Holz und PVC<br />
Zweiteiliger Stulpflügelbeschlag mit 20 mm nach oben und unten ausschließenden<br />
Riegeln. Vorgesehen <strong>für</strong> den Einsatz am Standflügel von zweiflügeligen Türen.<br />
Einfach über den Hebel – der unterhalb der Standarddrückerhöhe installiert ist – zu<br />
verriegeln und entriegeln.<br />
Standardausführung hell verzinkt oder gelb chromatiert.<br />
Ihre Vorteile<br />
• <strong>für</strong> zweiflügelige Außen- und Durchgangstüren.<br />
• besonders sicher durch starke Bolzen.<br />
• mit Kom<strong>for</strong>tgriff in der Mitte.<br />
• <strong>für</strong> den Standflügel in Kombination mit einer Mehrfachverriegelung AS 2600.<br />
• rechts oder links (bitte Gehflügel-Richtung angeben).<br />
Ferner lieferbar<br />
• ohne AT-Stück.<br />
• mit AT-Stück Nr. 115-41, austauschbar gegen elektrischen Türöffner eff-eff,<br />
Modell Nr. 119 E-130 (DIN links) und Modell Nr. 119 E 131 (DIN rechts).<br />
• <strong>für</strong> Holz in den Farben RAL 9006, 9007, 9016 weiß, altsilber Y8-0125, KTL schwarz.<br />
• <strong>für</strong> PVC in der Farbe weiß, KTL schwarz.<br />
G 10
<strong>Zubehör</strong> Stulpflügelbeschläge<br />
Abb. DIN rechts<br />
G 11
<strong>Zubehör</strong> Stulpflügelbeschläge<br />
Serie 504-1 (A)<br />
Profilabmessung: 14 x 24 x 8<br />
Achsmaß: 9<br />
mit fest montiertem AT-Stück<br />
(kein E-Öffner Einsatz möglich)<br />
ohne verstellbaren Gusskasten<br />
Riegelmaß 11,5 x 4<br />
Serie 230 (EG)<br />
Profilabmessung: 14 x 30 x 8<br />
Achsmaß: 15<br />
AT-Stück 115-41<br />
mit Rutsche im Öffnerbereich*<br />
mit verstellbarem Gusskasten<br />
Riegelmaß 11,5 x 4<br />
Serie 280 (EG)<br />
Profilabmessung: 14 x 28 x 8<br />
Achsmaß: 13<br />
AT-Stück 115-41<br />
nur mit abgesetzter Falle einsetzbar;<br />
mit Rutsche im Öffnerbereich<br />
mit verstellbarem Gusskasten<br />
Riegelmaß 11,5 x 4<br />
Serie 733-2 (EG)<br />
Profilabmessung: 8 x 28 x 8<br />
Achsmaß: 13<br />
AT-Stück 115-41<br />
nur mit abgesetzter Falle einsetzbar;<br />
mit Rutsche im Öffnerbereich*<br />
mit verstellbarem Gusskasten<br />
Riegelmaß 11,5 x 4<br />
* Alternativ AT-Stück 115-41, austauschbar gegen<br />
elektrischen Türöffner.<br />
Kombinationszeichnung<br />
7745, (7735)<br />
7720 7710<br />
I<br />
G 12
<strong>Zubehör</strong> Stulpflügelbeschläge<br />
Für Holz<br />
Artikel-Nr. <strong>für</strong> Mehrfach- L max. L min. B C G I (F) H<br />
Ausführung verriegelung (Alle Maßangaben in mm)<br />
Grundteile<br />
S60-504-1A AS 2600 Standard 2070 1910 708 730 1020 160 726<br />
S60-504-1A AS 2600 W006 2070 1936 734 756 1020 134 726<br />
S60-280EG AS 2600 W152 2070 1970 734 756 1050 100 756<br />
S60-280EG AS 2600 W142 1900 1694 734 480 1050 206 756<br />
S60-230EG AS 2600 W161 2070 1936 624 756 1020 134 726<br />
S60-230EG AS 2600 W162 2070 1786 624 606 1020 284 726<br />
Endstücke<br />
7710-504-1 AS 2600 Standard/W006 100<br />
7720-504-1 AS 2600 Standard/W006 170<br />
7710-280 AS 2600/W142/W152 100<br />
7720-280 AS 2600/W142/W152 170<br />
7710-230 AS 2600 W161/162 100<br />
7720-230 AS 2600 W161/162 170<br />
* 7735-230G AS 2600 W161 mit 2580 W001 270<br />
7745-230G AS 2600 W161 mit 2580 W001 370<br />
Für PVC<br />
Artikel-Nr. <strong>für</strong> Mehrfach- L max. L min. B C G I (F) H<br />
Ausführung verriegelung (Alle Maßangaben in mm)<br />
Grundteile<br />
S60-733-2EG AS 2600 Standard 2070 1910 708 730 1020 160 726<br />
S60-733-2EG AS 2600 W006 2070 1936 734 756 1020 134 726<br />
S60-733-2EG AS 2600 W066 2070 1786 734 606 1020 284 726<br />
Endstücke<br />
7710-733-2 AS 2600 Standard/W006/W066 100<br />
7720-733-2 AS 2600 Standard/W006/W066 170<br />
*<br />
7735-733-2G AS 2600 Standard/W006 mit 2580 W001 270<br />
7745-733-2G AS 2600 Standard/W006 mit 2580 W001 370<br />
*Achtung verminderte Kürzbarkeit (I) am Grundteil um 36 mm bei den Anbieterkombinationen<br />
S60-230 EG mit 7735-230G <strong>für</strong> AS 2600 W161 mit 2580 W001 (I = 134 - 36 = 98 mm)<br />
S60-733-2 EG mit 7735-733-2G <strong>für</strong> AS 2600 Standard mit 2580 W001 (I = 160 - 36 = 124 mm)<br />
S60-733-2 EG mit 7735-733-2G <strong>für</strong> AS 2600 W006 mit 2580 W001 (I = 134 - 36 = 98 mm)<br />
Kürzbarkeiten in Verbindung mit der Mehrfachverriegelung beachten!<br />
G 13
<strong>Zubehör</strong> Stulpflügelbeschläge<br />
Einbaurichtlinien<br />
Abb. 1 Einbaulage des Stulpflügelbeschlages<br />
zur Mehrfachverriegelung<br />
Stulpflügelbeschlags- und Verschlussausführung nach Auftrag<br />
Allgemeine Hinweise<br />
wie gezeichnet DIN rechts<br />
spiegelbildlich DIN links<br />
Abb. 2 Positionierung (Einbaulage) des<br />
Stulpflügelbeschlages zum Schließblech<br />
Hebelbetätigung/Kürzbarkeit des Stulpflügelbeschlages:<br />
• Pos. 1: Hebel bei geschlossener Stellung bündig abschließend<br />
zur Stulpbreite. Beide Riegel sind<br />
komplett ausgefahren. Der Stulpflügelbeschlag<br />
kann nun, falls er<strong>for</strong>derlich, am Grundteil<br />
gekürzt werden. (Für den Stulp und die Treibstangenverzahnung<br />
muss danach wieder die<br />
Gratfreiheit gewährleistet sein.) Das Maß der<br />
Kürzbarkeit richtet sich nach der W-Ausführung<br />
und der Flügelfalzhöhe.<br />
• Pos. 2: In Offenstellung sind beide Riegel bündig zu<br />
den Stulpenden.<br />
Anschraublöcher des Stulpflügelbeschlages:<br />
• Alle Anschraublöcher sind bei der Montage vorzubohren.<br />
Die Verschraubungslöcher dürfen nicht aufgebohrt<br />
und die Distanzhülsen dürfen nicht entfernt werden.<br />
• empfohlene Schrauben:<br />
*1) Senk-Holzschraube Din 97-/ 7997-4,5 x 50-St<br />
*2) Senk-Holzschraube Din 97-/ 7997-3,5 x 40-St<br />
Richtungsangabe des Stulpflügelbeschlages:<br />
• entsprechend unseren Schließleisten; DIN links;<br />
DIN rechts richtungsweisend ist der Gehflügel.<br />
G 14
<strong>Zubehör</strong> Stulpflügelbeschläge<br />
Abb. 3 Einbausituation Serie 504-1 (A)<br />
<strong>für</strong> Eurofalz<br />
Gehflügel<br />
(Schlosskasten)<br />
Gehflügel<br />
(Schlosskasten)<br />
Gehflügel<br />
Profilbeispiel<br />
(Schlosskasten)<br />
Mehrfachverriegelung<br />
Mehrfachverriegelung<br />
4<br />
3<br />
Mehrfachverriegelung<br />
12<br />
11<br />
<strong>für</strong> Stulp-Profil 14 x 24 x 8; Achsmaß 9<br />
4<br />
12<br />
9<br />
9<br />
Standflügel<br />
24<br />
<strong>für</strong> Stulp-Profil 14 x 24 x 8; Achsmaß 9<br />
Ausfräsung Schenkel 14 mm<br />
(Abstützung; Stulpflügel)<br />
Abb. 5 Einbausituation Serie 504-1 (A)<br />
<strong>für</strong> Euronut<br />
Standflügel<br />
24<br />
Ausfräsung Schenkel 14 mm<br />
(Abstützung; Stulpflügel)<br />
Abb. 7 Einbausituation Serie 733-2 (EG)<br />
<strong>für</strong> den Kunststoffbereich<br />
13<br />
Standflügel<br />
28<br />
<strong>für</strong> Stulp-Profil 8 x 28 x 8; Achsmaß 13<br />
Abb. 4 Einbausituation Serie 280 (EG)<br />
<strong>für</strong> Eurofalz<br />
Gehflügel<br />
(Schlosskasten)<br />
Mehrfachverriegelung<br />
4<br />
12<br />
13<br />
Standflügel<br />
28<br />
<strong>für</strong> Stulp-Profil 14 x 28 x 8; Achsmaß 13<br />
4<br />
12<br />
15<br />
Ausfräsung Schenkel 14 mm<br />
(Abstützung; Stulpflügel)<br />
Abb. 6 Einbausituation Serie 230 (EG)<br />
<strong>für</strong> Eurofalz<br />
Gehflügel Mehrfachverriegelung<br />
(Schlosskasten)<br />
Standflügel<br />
30<br />
<strong>für</strong> Stulp-Profil 14 x 30 x 8; Achsmaß 15<br />
Allgemeine Hinweise<br />
Ausfräsung Schenkel 14 mm<br />
(Abstützung; Stulpflügel)<br />
Beim Einsatz einer Mehrfachverriegelung in Verbindung<br />
mit dem Stulpflügelbeschlag ist darauf zu achten, dass:<br />
• der Stulpflügelbeschlag so montiert wird, dass ein<br />
Zwischenmaß von ca. 4 mm zwischen Schließleistenende<br />
des Stulpflügelbeschlages und des Schließbleches<br />
(Bodenbuchse) vorhanden ist (Abb. 2).<br />
• der 14 mm lange Schenkel des Stulpflügelbeschlages<br />
so eingelassen wird, dass eine Schräglage und ein<br />
Wegkippen der Schließleiste nicht möglich und somit<br />
eine seitliche Abstützung <strong>für</strong> die Positionierung<br />
gewährleistet ist (Abb. 3-6).<br />
• die skizzierte Positionslage des Stulpflügelbeschlages<br />
zur Mehrfachverriegelung gewährleistet ist (Abb. 1+2).<br />
• die jeweiligen Artikelnummerzeichnungen <strong>für</strong> die<br />
Ausführungsvarianten der Stulpflügelbeschläge und<br />
deren dazugehörige <strong>Mehrfachverriegelungen</strong><br />
beachtet werden.<br />
• vor dem Einbau sämtliche Verunreinigungen, z. B.<br />
Späne aus den Fräsbereichen, entfernt werden.<br />
Technische Änderungen vorbehalten.<br />
G 15
<strong>Zubehör</strong> Kantriegel* zum Feststellen des Standflügels 2-flügeliger Türen<br />
<strong>für</strong> Türen mit 4 mm Falzluft<br />
Nr. 8030 verzinkt und gelb chromatiert, Länge 185 mm,<br />
Verriegelung durch 18 mm ausschließenden Bolzen, 10 mm Ø,<br />
Funktion gemäß DIN V 18103, Rs oder Ls<br />
Nr. 8031 wie vor, jedoch 400 mm lang<br />
<strong>für</strong> Türen mit 16 mm Beschlagaufnahmenut<br />
Nr. 8032 verzinkt und gelb chromatiert, Länge 200 mm,<br />
Verriegelung durch 20 mm ausschließenden Bolzen, 10 x 6 mm,<br />
Funktion gemäß DIN V 18103, mit Halteplatte, Rs oder Ls<br />
<strong>für</strong> Türen mit Euronut<br />
Nr. 8033 verzinkt und gelb chromatiert, Länge 160 mm,<br />
Verriegelung durch 20 mm ausschließenden Bolzen, 12,7 x 3,8 mm,<br />
Funktion gemäß DIN V 18103, Halteplatte mit Füllstück<br />
<strong>für</strong> Beschlagaufnahmenut, Rs oder Ls<br />
Je nach Einbausituation ist bei Einsatz einer Mehrfachverriegelung ein von der Standardausführung<br />
abweichender Sitz der Zusatzschlösser, z.B. Maßvariante W 300, er<strong>for</strong>derlich.<br />
Ferner lieferbare Oberflächen:<br />
verzinkt und hell chromatiert, silberfarbig-, weiß-, braun-, schwarz kunststoffbeschichtet<br />
* siehe auch <strong>Katalog</strong> A-2<br />
8030<br />
8031<br />
8032<br />
8033<br />
G 16
<strong>Zubehör</strong> Kantriegel* zum Feststellen des Standflügels 2-flügeliger Türen<br />
<strong>für</strong> Alu- oder Kunststofftüren ohne Beschlagaufnahmenut<br />
Nr. 8034 verzinkt und gelb chromatiert, Länge 200 mm,<br />
Verriegelung durch 20 mm ausschließenden Bolzen, 10 x 6 mm,<br />
Funktion gemäß DIN V 18103, Rs oder Ls<br />
<strong>für</strong> Türen mit 14 mm Beschlagaufnahmenut<br />
Nr. 8036 verzinkt und gelb chromatiert, Länge 160 mm,<br />
Verriegelung durch 20 mm ausschließenden Bolzen, 12,7 x 5,5 mm,<br />
Funktion gemäß DIN V 18103, mit Halteplatte, Rs oder Ls<br />
<strong>für</strong> Türen mit 12 mm Beschlagaufnahmenut<br />
Nr. 8037 verzinkt und gelb chromatiert, Länge 160 mm,<br />
Verriegelung durch 20 mm ausschließenden Bolzen, 12,7 x 5,5 mm, Funktion<br />
gemäß DIN V 18103, mit Halteplatte, Rs oder Ls<br />
Je nach Einbausituation ist bei Einsatz einer Mehrfachverriegelung ein von der Standardausführung<br />
abweichender Sitz der Zusatzschlösser, z.B. Maßvariante W 300, er<strong>for</strong>derlich.<br />
Ferner lieferbare Oberflächen:<br />
verzinkt und hell chromatiert, silberfarbig-, weiß-, braun-, schwarz kunststoffbeschichtet<br />
* siehe auch <strong>Katalog</strong> A-2<br />
8034<br />
8036<br />
8037<br />
G 17
<strong>Zubehör</strong> <strong>für</strong> Kunststoff-Profilsysteme<br />
H 1-36<br />
Einsatzvorschläge in alphabetischer Reihenfolge der Profilhersteller<br />
H<br />
Hinweise zum Kapitel H umseitig
<strong>Zubehör</strong> <strong>für</strong> Kunststoff-Profilsysteme<br />
Hinweise zum Kapitel H<br />
Artikelbeschreibung<br />
In der Vorschlag-Spezifikation sind <strong>für</strong> die verschiedenen Profilsysteme lediglich die Bestell-Nummern der empfohlenen Schließteile<br />
angegeben. Beachten Sie bitte deren Ausführungs-Beschreibung mit Maßangaben und Erläuterungen in den Kapiteln C - F.<br />
Nicht gelistete Profile<br />
In diesem Falle erbitten wir die Angabe des Herstellers mit Flügel- und Rahmenbezeichnung. Die Türverriegelung- und <strong>Zubehör</strong>daten<br />
werden danach umgehend ermittelt.<br />
Schließplatten und Bandseiten-Sicherungen auf Anfrage<br />
Bei einigen Profilkombinationen sind in der Vorschlag-Spezifikation zwar Schließbleche, nicht aber Schließplatten und Bandseiten-<br />
Sicherungen angegeben. Falls diese Schließteile benötigt werden, erbitten wir Ihre Anfrage mit Mengenangabe.<br />
Verstellbarkeit 1-riegeliger Schließbleche<br />
Die gegen Aufpreis lieferbaren Zusatz-Ausstattungen sind in der entsprechenden Rubrik gekennzeichnet mit V bzw. G,<br />
V = regulierbarer Andruck durch Exzenterdorne,<br />
G = regulierbarer Andruck durch verstellbaren Gusskasten.<br />
Bei den in der Vorschlagliste aufgeführten Schließblechen ohne „V/G-Hinweis“ ist die Verstellbarkeit maßlich bedingt nicht oder<br />
nicht ohne weiteres zu realisieren. Hier erbitten wir Ihre Anfrage mit Angabe der benötigten Stückzahl.<br />
Zeichnungen<br />
Von den in der Liste aufgeführten Profilsystemen können auf Wunsch Schnittzeichnungen mit einskizziertem Verschlusstyp zur<br />
Verfügung gestellt werden.
<strong>Zubehör</strong> <strong>für</strong> Kunststoff-Profilsysteme<br />
<strong>Zubehör</strong>teile die in der nachfolgenden Vorschlag-Spezifikation aufgeführt sind<br />
Schließbleche <strong>für</strong> Hauptschlösser<br />
Fallen-Riegel-Schließbleche<br />
mit und ohne Lochung <strong>für</strong> E-Öffner<br />
Fallen-Schließbleche<br />
mit und ohne Lochung <strong>für</strong> E-Öffner<br />
Schließbleche <strong>für</strong> Zusatzverriegelungen<br />
Schließplatten<br />
Bandseiten-Sicherungen<br />
Austauschstücke<br />
<strong>für</strong> Rundbolzen <strong>für</strong> Schwenkriegel <strong>für</strong> Bolzen-Schwenkriegelkombination<br />
<strong>für</strong> Rollzapfen Beschreibung der<br />
Schließteile und weiteres<br />
<strong>Zubehör</strong> <strong>für</strong> Kunststoff-<br />
Profilsysteme –<br />
z. B. Schließkästen,<br />
Schließleisten,<br />
Hinterfütterungen,<br />
Kantriegel u. a. –<br />
siehe Kapitel D - G.
Einsatzvorschläge der Profilhersteller (alphabetische Reihenfolge)<br />
Profilhersteller · Profilsysteme Ergänzende Angaben zum Verschlusstyp Schließbleche <strong>für</strong> Hauptschlösser<br />
Flügel Rahmen Stulpausführung<br />
Rollzapfenhöhe<br />
Dornmaß<br />
Achsmaß<br />
Fallen-Riegel-<br />
Fallen-Schließblech<br />
Schließblech<br />
E = Ausführung mit Lochung <strong>für</strong> E-Öffner<br />
01 ACCORD<br />
01<br />
02 System 503 System 503 P-6-24 6 45 12 25-757 E – – 02<br />
03 900.222 503.601 F-24 – 50 12 25-767 E – – 03<br />
04 900.222 503.627 F-24 – 50 12 25-767 E – – 04<br />
05 503.629 503.601 F-16 – 30 9 – – 125-971 E 05<br />
06 503.629 503.627 F-16 – 30 9 – – 125-971 E 06<br />
07 AP 005 AP 001 F-16 – 45 9 25-971-1 E – – 07<br />
08 htadi raad 70 F-16 8 50 13 25-941 E – – 08<br />
09 F-16 8 50 13 25-853 E – – 09<br />
10 htadi raad 85 F-16 8 50 13 25-941 E – – 10<br />
11 F-16 8 50 13 25-853 E – – 11<br />
12 htadi ram 85 F-16 8 50 13 25-941 E – – 12<br />
13 F-16 8 50 13 25-853 E – – 13<br />
14 htadi ram 70 F-16 8 50 13 25-941 E – – 14<br />
15 F-16 8 50 13 25-853 E – – 15<br />
16 htadi raad 70 F-16 8 50 13 25-941 E – – 16<br />
17 F-16 8 50 13 25-853 E – – 17<br />
18 htada raad 85 F-16 8 50 13 25-941 E – – 18<br />
19 F-16 8 50 13 25-853 E – – 19<br />
20 htada ram 85 F-16 8 50 13 25-941 E – – 20<br />
21 F-16 8 50 13 25-853 E – – 21<br />
22 htada ram 70 F-16 8 50 13 25-941 E – – 22<br />
23 F-16 8 50 13 25-853 E – – 23<br />
24 btmda ramd 70 F-16 8 40 13 25-941 E – – 24<br />
25 F-16 8 40 13 25-853 E – – 25<br />
26 btmda ramd 85 F-16 8 40 13 25-941 E – – 26<br />
27 F-16 8 40 13 25-853 E – – 27<br />
28 btmdi ramd 70 F-16 8 40 13 25-941 E – – 28<br />
29 F-16 8 40 13 25-853 E – – 29<br />
30 btmdi ramd 85 F-16 8 40 13 25-941 E – – 30<br />
31 F-16 8 40 13 25-853 E – – 31<br />
32 Actual 32<br />
33 P 620 P 601 F-24 8 40 13 25-542 E – – 33<br />
34 System 200 System 200 P-6-24 6 45 12 25-06-24 E – – 34<br />
35 System 300 System 300 P-6-24 6 45 19 25-06-24 E – – 35<br />
36 P 1309-A400 P 1402-A400 F 24 8 45 18,5 25-709 E – – 36<br />
37 P 1409 P 1402 F-24 8 45 18,5 25-709 E – – 37<br />
38 System A300 System A300 F-16 – 40 8,5 25-802 E – – 38<br />
39 P 602 P 601 F-16 8 25 9 – – 125-870 – 39<br />
40 PA 1416 PA 1402 F-16 – 55 9 25-926 E – – 40<br />
41 6031 6028 F-16 8 35 12,9 25-958 E – – 41<br />
42 6042 6028 F-16 8 45 12,9 25-958 E – – 42<br />
43 Panorama 501 43<br />
44 1515 1501 F-16 8 35 9 25-767-3 E – – 44<br />
45 Panorama 503 45<br />
46 1508 1501 F-16 8 55 15,5 25-767-2 E – – 46<br />
H 1
Einsatzvorschläge der Profilhersteller (alphabetische Reihenfolge)<br />
Austauschstücke<br />
Schließbleche <strong>für</strong> Zusatz-Verriegelungen Schließplatten<br />
V 1) G 2)<br />
verstellbare<br />
Ausführung<br />
Bandseitensicherungen<br />
01 01<br />
02 116-08-5 2325-757 2825-757 3625-757 x x 8050-01-24 – 02<br />
03 116-08-5 2325-767 2825-767 3625-767 x x – – 03<br />
04 116-08-5 2325-767 2825-767 3625-767 x x – – 04<br />
05 116-08 2325-971 2825-971 3625-971 x – – – 05<br />
06 116-08 2325-971 2825-971 3625-971 x – – – 06<br />
07 116-08 2325-971-1 2825-971-1 3625-971-1 x – – – 07<br />
08 116-08-5 2325-941 2825-941 3625-941 x x 8050-07-2-20 – 08<br />
09 116-06-5 2325-853 2825-853 3625-853 x x 8050-07-2-20 – 09<br />
10 116-08-5 2325-941 2825-941 3625-941 x x 8050-07-2-20 – 10<br />
11 116-06-5 2325-853 2825-853 3625-853 x x 8050-07-2-20 – 11<br />
12 116-08-5 2325-941 2825-941 3625-941 x x 8050-07-2-20 – 12<br />
13 116-06-5 2325-853 2825-853 3625-853 x x 8050-07-2-20 – 13<br />
14 116-08-5 2325-941 2825-941 3625-941 x x 8050-07-2-20 – 14<br />
15 116-06-5 2325-853 2825-853 3625-853 x x 8050-07-2-20 – 15<br />
16 116-08-5 2325-941 2825-941 3625-941 x x 8050-07-2-20 – 16<br />
17 116-06-5 2325-853 2825-853 3625-853 x x 8050-07-2-20 – 17<br />
18 116-08-5 2325-941 2825-941 3625-941 x x 8050-07-2-20 – 18<br />
19 116-06-5 2325-853 2825-853 3625-853 x x 8050-07-2-20 – 19<br />
20 116-08-5 2325-941 2825-941 3625-941 x x 8050-07-2-20 – 20<br />
21 116-06-5 2325-853 2825-853 3625-853 x x 8050-07-2-20 – 21<br />
22 116-08-5 2325-941 2825-941 3625-941 x x 8050-07-2-20 – 22<br />
23 116-06-5 2325-853 2825-853 3625-853 x x 8050-07-2-20 – 23<br />
24 116-08-5 2325-941 2825-941 3625-941 x x 8050-07-2-20 – 24<br />
25 116-06-5 2325-853 2825-853 3625-853 x x 8050-07-2-20 – 25<br />
26 116-08-5 2325-941 2825-941 3625-941 x x 8050-07-2-20 – 26<br />
27 116-06-5 2325-853 2825-853 3625-853 x x 8050-07-2-20 – 27<br />
28 116-08-5 2325-941 2825-941 3625-941 x x 8050-07-2-20 – 28<br />
29 116-06-5 2325-853 2825-853 3625-853 x x 8050-07-2-20 – 29<br />
30 116-08-5 2325-941 2825-941 3625-941 x x 8050-07-2-20 – 30<br />
31 116-06-5 2325-853 2825-853 3625-853 x x 8050-07-2-20 – 31<br />
32 32<br />
33 116-06-6 2325-542 2825-542 3625-542 x – 8092-643 – 33<br />
34 116-06 2325-06-24 2825-06-24 3625-06-24 – x 8050-01-24 8042-06-24 34<br />
35 116-06 2325-06-24 2825-06-24 3625-06-24 – x 8050-01-24 8042-06-24 35<br />
36 116-08-6 2325-709 2825-709 3625-709 x x 8092-709 – 36<br />
37 116-08-6 2325-709 2825-709 3625-709 x x 8092-709 – 37<br />
38 116-10 2325-802 2825-802 3625-802 x – – – 38<br />
39 – 2325-870 2825-870 3625-870 x – 8092-608 – 39<br />
40 116-08 2325-926 2825-926 3625-926 x – – – 40<br />
41 116-06-5 2325-958 2825-958 3625-958 x x 8092-958 8042-073 41<br />
42 116-06-5 2325-958 2825-958 3625-958 x x 8092-958 8042-073 42<br />
43 43<br />
44 116-08 2325-767-3 2825-767-3 3625-767-3 x – 8092-717 – 44<br />
45 45<br />
46 116-08-6 2325-767-2 2825-767-2 3625-767-2 x x 8092-767-2 – 46<br />
1) 2) V = regulierbarer Andruck durch Exzenterdorne G = regulierbarer Andruck durch verstellbaren Gusskasten<br />
H 2
Einsatzvorschläge der Profilhersteller (alphabetische Reihenfolge)<br />
Profilhersteller · Profilsysteme Ergänzende Angaben zum Verschlusstyp Schließbleche <strong>für</strong> Hauptschlösser<br />
Flügel Rahmen Stulpausführung<br />
Rollzapfenhöhe<br />
Dornmaß<br />
Achsmaß<br />
Fallen-Riegel-<br />
Fallen-Schließblech<br />
Schließblech<br />
E = Ausführung mit Lochung <strong>für</strong> E-Öffner<br />
01 Alphacan<br />
01<br />
02 Fersina 02<br />
03 ZAR ELL F-16 8 25 10 – – 125-10-20 – 03<br />
04 POR ELA F-16 – 35 15 25-713 E – – 04<br />
05 ZAF ELA F-16 8 35 9 25-717 E – – 05<br />
06 AFE 01 TAO F-16 8 35 9 25-535 E – – 06<br />
07 Profilia 07<br />
08 PK 193 PF 089 F-16 8 35 9 25-718 E – – 08<br />
09 PK 193 PK 123 F-16 8 35 9 25-717 E – – 09<br />
10 PE 613 PE 601 F-16 – 30 13 – – 125-927 E 10<br />
11 PE 613 PE 621 F-16 8 30 13 – – 125-900 E 11<br />
12 System Master 12<br />
13 ZAF 05 ELA 02 F-16 8 35 9 25-597 E – – 13<br />
14 TIO 02 ELA 02 F-16 8 40 9 25-597 E – – 14<br />
15 ZAF 05 TAO 00 F-16 8 35 9 25-535 E – – 15<br />
16 16<br />
17 Aluplast 17<br />
18 Ideal 2000 18<br />
19 120033 120003 F-16 8 45 13 25-941 E – – 19<br />
20 120035 120003 F-16 8 45 13 25-941 E – – 20<br />
21 120030 120204 F-16 8 25 13 – – 125-733-2 E 21<br />
22 120030/031 120002 F-16 8 25 13 – – 125-941 E 22<br />
23 Ideal 4000 23<br />
24 140031 140002 F-16 – 35 13 25-153-1 E – – 24<br />
25 140032 140002 F-16 – 35 13 25-153-1 E – – 25<br />
26 140033 140003 F-16 – 45 13 25-153-1 E – – 26<br />
27 140035 140003 F-16 – 45 13 25-153-1 E – – 27<br />
28 28<br />
29 Bert 29<br />
30 PC-B 2 PC- B1 F-16 8 45 9 25-06-20 – – – 30<br />
31 31<br />
32 32<br />
33 33<br />
34 34<br />
35 35<br />
36 36<br />
37 37<br />
38 38<br />
39 39<br />
40 40<br />
41 41<br />
42 42<br />
43 43<br />
44 44<br />
45 45<br />
46 46<br />
H 3
Einsatzvorschläge der Profilhersteller (alphabetische Reihenfolge)<br />
Austauschstücke<br />
Schließbleche <strong>für</strong> Zusatz-Verriegelungen Schließplatten<br />
V 1) G 2)<br />
verstellbare<br />
Ausführung<br />
Bandseitensicherungen<br />
01 01<br />
02 02<br />
03 – 2325-10-20 2825-10-20 3625-10-20 – – 2 x 8050-01-18 – 03<br />
04 116-08-5 2325-713 2825-713 3625-713 x x – – 04<br />
05 116-08 2325-717 2825-717 3625-717 x – 8092-717 – 05<br />
06 116-08 2325-535 2825-535 3625-535 x – 8092-645 8042-017 06<br />
07 07<br />
08 116-08 2325-718 2825-718 3625-718 x – 8092-718 – 08<br />
09 116-08 2325-717 2825-717 3625-717 x – 8092-717 – 09<br />
10 116-08-5 2325-927 2825-927 3625-927 x x – – 10<br />
11 116-06-5 2325-900 2825-900 3625-900 x x 8092-615 – 11<br />
12 12<br />
13 116-08 2325-597 2825-597 3625-597 x – 8092-697 – 13<br />
14 116-08 2325-597 2825-597 3625-597 x – 8092-697 – 14<br />
15 116-08 2325-535 2825-535 3625-535 x – 8092-645 8042-017 15<br />
16 16<br />
17 17<br />
18 18<br />
19 116-08-5 2325-941 2825-941 3625-941 x x 8050-07-2-20 – 19<br />
20 116-08-5 2325-941 2825-941 3625-941 x x 8050-07-2-20 – 20<br />
21 116-08-5 2325-733-2 2825-733-2 3625-733-2 x – 8092-615 – 21<br />
22 116-08-5 2325-941 2825-941 3625-941 x x 8050-07-2-20 – 22<br />
23 23<br />
24 116-08-5 2325-153-1 2825-153-1 3625-153-1 x x – – 24<br />
25 116-08-5 2325-153-1 2825-153-1 3625-153-1 x x – – 25<br />
26 116-08-5 2325-153-1 2825-153-1 3625-153-1 x x – – 26<br />
27 116-08-5 2325-153-1 2825-153-1 3625-153-1 x x – – 27<br />
28 28<br />
29 29<br />
30 – 2325-06-20 2825-06-20 3625-06-20 – – 8050-01-18 – 30<br />
31 31<br />
32 32<br />
33 33<br />
34 34<br />
35 35<br />
36 36<br />
37 37<br />
38 38<br />
39 39<br />
40 40<br />
41 41<br />
42 42<br />
43 43<br />
44 44<br />
45 45<br />
46 46<br />
1) 2) V = regulierbarer Andruck durch Exzenterdorne G = regulierbarer Andruck durch verstellbaren Gusskasten<br />
H 4
Einsatzvorschläge der Profilhersteller (alphabetische Reihenfolge)<br />
Profilhersteller · Profilsysteme Ergänzende Angaben zum Verschlusstyp Schließbleche <strong>für</strong> Hauptschlösser<br />
Flügel Rahmen Stulpausführung<br />
Rollzapfenhöhe<br />
Dornmaß<br />
Achsmaß<br />
Fallen-Riegel-<br />
Fallen-Schließblech<br />
Schließblech<br />
E = Ausführung mit Lochung <strong>für</strong> E-Öffner<br />
01 Brügmann<br />
01<br />
02 HT 013 HT 010 P-6-24 6 45 18 8050-532 E – – 02<br />
03 HT 013 HT 022 P-6-24 6 50 18 8050-532 E – – 03<br />
04 HT 022 HT 012 P-6-24 6 45 18 8050-532 E – – 04<br />
05 HT 022 HT 010 P-6-24 6 50 18 8050-532 E – – 05<br />
06 HT 013 HT 012 P-6-24 6 50 18 8050-532 E – – 06<br />
07 HT 022 HT 013 P-6-24 6 50 18 8050-532 E – – 07<br />
08 HT 020 HT 010 F-20 6 45 18 25-555 E – – 08<br />
09 HT 020 HT 012 F-20 6 50 18 25-555 E – – 09<br />
10 HT 020 HT 013 F-20 6 50 18 25-555 E – – 10<br />
11 HF 409 HF 430 F-16 8 35 9 25-506 E – – 11<br />
12 HF 409 HF 450 F-16 8 35 9 25-506 E – – 12<br />
13 HF 409 HF 459 F-16 8 35 9 25-506 E – – 13<br />
14 HF 409 HF 461 F-16 8 35 9 25-506 E – – 14<br />
15 HF 409 HF 431 F-16 8 35 9 25-506 E – – 15<br />
16 HF 409 HF 432 F-16 8 35 9 25-506 E – – 16<br />
17 HF 409 HF 434 F-16 8 35 9 25-506 E – – 17<br />
18 HF 409 HF 452 F-16 8 35 9 25-506 E – – 18<br />
19 HF 409 HF 455 F-16 8 35 9 25-506 E – – 19<br />
20 HF 409 HF 464 F-16 8 35 9 25-506 E – – 20<br />
21 HF 409 HF 465 F-16 8 35 9 25-506 E – – 21<br />
22 HF 409 HF 433 F-16 8 35 9 25-506 E – – 22<br />
23 HF 409 HF 435 F-16 8 35 9 25-506 E – – 23<br />
24 HF 409 HF 453 F-16 8 35 9 25-506 E – – 24<br />
25 HF 403 HF 431 F-16 8 45 9 25-506 E – – 25<br />
26 HF 403 HF 432 F-16 8 45 9 25-506 E – – 26<br />
27 HF 404 HF 432 F-16 8 35 9 25-506 E – – 27<br />
28 HF 413 HF 432 F-16 8 55 9 25-506 E – – 28<br />
29 HF 413 HF 452 F-16 8 55 9 25-506 E – – 29<br />
30 HF 403 HF 463 F-16 8 45 9 25-506 E – – 30<br />
31 HF 954 HF 962 F-16 8 45 9 25-883 E – – 31<br />
32 HF 954 HF 960 F-16 8 45 9 25-883 E – – 32<br />
33 HF 954 HF 963 F-16 8 45 9 25-883 E – – 33<br />
34 HF 955 HF 962 F-16 8 45 9 25-883 E – – 34<br />
35 HF 955 HF 960 F-16 8 45 9 25-883 E – – 35<br />
36 HF 955 HF 963 F-16 8 45 9 25-883 E – – 36<br />
37 AD-System 37<br />
38 HP 155/HP 156 HP 104 F-20 8 45 20 25-183 E – – 38<br />
39 HP 153/HP 154 HP 104 F-16 8 35 13 25-967 E – – 39<br />
40 MD-System 40<br />
41 HP 253 HP 203/HP 202 F-16 8 45 13 25-967 E – – 41<br />
42 Coopre 2 42<br />
43 System 86 System 86 F-16 8 25 8,5 – – 125-594 E 43<br />
44 SB 210 SB 100 F-16 – 35 8,5 25-532 E – – 44<br />
45 SB 202 GB 102 F-16 8 45 11,5 25-594 E – – 45<br />
46 GB 202 GB 304 F-16 8 45 11,5 25-594 E – – 46<br />
H 5
Einsatzvorschläge der Profilhersteller (alphabetische Reihenfolge)<br />
Austauschstücke<br />
Schließbleche <strong>für</strong> Zusatz-Verriegelungen Schließplatten<br />
V 1) G 2)<br />
verstellbare<br />
Ausführung<br />
Bandseitensicherungen<br />
01 01<br />
02 115-18 2330-532 2830-532 3630-532 x x 8050-01-24 – 02<br />
03 115-18 2330-532 2830-532 3630-532 x x 8050-01-24 – 03<br />
04 115-18 2330-532 2830-532 3630-532 x x 8050-01-24 – 04<br />
05 115-18 2330-532 2830-532 3630-532 x x 8050-01-24 – 05<br />
06 115-18 2330-532 2830-532 3630-532 x x 8050-01-24 – 06<br />
07 115-18 2330-532 2830-532 3630-532 x x 8050-01-24 – 07<br />
08 116-06-5 2325-555 2825-555 3625-555 x x 8092-655 8042-046 08<br />
09 116-06-5 2325-555 2825-555 3625-555 x x 8092-655 8042-046 09<br />
10 116-06-5 2325-555 2825-555 3625-555 x x 8092-655 8042-046 10<br />
11 116-06 2325-506 2825-506 3625-506 x – 8092-604 8042-031 11<br />
12 116-06 2325-506 2825-506 3625-506 x – 8092-604 8042-031 12<br />
13 116-06 2325-506 2825-506 3625-506 x – 8092-604 8042-031 13<br />
14 116-06 2325-506 2825-506 3625-506 x – 8092-604 8042-031 14<br />
15 116-06 2325-506 2825-506 3625-506 x – 8092-604 8042-031 15<br />
16 116-06 2325-506 2825-506 3625-506 x – 8092-604 8042-031 16<br />
17 116-06 2325-506 2825-506 3625-506 x – 8092-604 8042-031 17<br />
18 116-06 2325-506 2825-506 3625-506 x – 8092-604 8042-031 18<br />
19 116-06 2325-506 2825-506 3625-506 x – 8092-604 8042-031 19<br />
20 116-06 2325-506 2825-506 3625-506 x – 8092-604 8042-031 20<br />
21 116-06 2325-506 2825-506 3625-506 x – 8092-604 8042-031 21<br />
22 116-06 2325-506 2825-506 3625-506 x – 8092-604 8042-031 22<br />
23 116-06 2325-506 2825-506 3625-506 x – 8092-604 8042-031 23<br />
24 116-06 2325-506 2825-506 3625-506 x – 8092-604 8042-031 24<br />
25 116-06 2325-506 2825-506 3625-506 x – 8092-604 8042-031 25<br />
26 116-06 2325-506 2825-506 3625-506 x – 8092-604 8042-031 26<br />
27 116-06 2325-506 2825-506 3625-506 x – 8092-604 8042-031 27<br />
28 116-06 2325-506 2825-506 3625-506 x – 8092-604 8042-031 28<br />
29 116-06 2325-506 2825-506 3625-506 x – 8092-604 8042-031 29<br />
30 116-06 2325-506 2825-506 3625-506 x – 8092-604 8042-031 30<br />
31 116-08 2325-883 2825-883 3625-883 x – 8092-658-1 – 31<br />
32 116-08 2325-883 2825-883 3625-883 x – 8092-658-1 – 32<br />
33 116-08 2325-883 2825-883 3625-883 x – 8092-658-1 – 33<br />
34 116-08 2325-883 2825-883 3625-883 x – 8092-658-1 – 34<br />
35 116-08 2325-883 2825-883 3625-883 x – 8092-658-1 – 35<br />
36 116-08 2325-883 2825-883 3625-883 x – 8092-658-1 – 36<br />
37 37<br />
38 115-41 2325-183 2825-183 3625-183 x x 8092-183 – 38<br />
39 116-08-5 2325-967 2825-967 3625-967 x – – – 39<br />
40 40<br />
41 116-08-5 2325-967 2825-967 3625-967 x – – – 41<br />
42 42<br />
43 116-06 2325-594 2825-594 3625-594 – – 8092-694 – 43<br />
44 116-08 2325-532 2825-532 3625-532 – – – – 44<br />
45 116-06 2325-594 2825-594 3625-594 – – 8092-694 – 45<br />
46 116-06 2325-594 2825-594 3625-594 – – 8092-694 – 46<br />
1) 2) V = regulierbarer Andruck durch Exzenterdorne G = regulierbarer Andruck durch verstellbaren Gusskasten<br />
H 6
Einsatzvorschläge der Profilhersteller (alphabetische Reihenfolge)<br />
Profilhersteller · Profilsysteme Ergänzende Angaben zum Verschlusstyp Schließbleche <strong>für</strong> Hauptschlösser<br />
Flügel Rahmen Stulpausführung<br />
Rollzapfenhöhe<br />
Dornmaß<br />
Achsmaß<br />
Fallen-Riegel-<br />
Fallen-Schließblech<br />
Schließblech<br />
E = Ausführung mit Lochung <strong>für</strong> E-Öffner<br />
01 Deceuninck<br />
01<br />
02 812 852 F-16 8 25 8,5 – – 125-558 E 02<br />
03 812 851 F-16 8 25 8,5 – – 125-558 E 03<br />
04 855 801 F-16 8 35 9 25-573 E – – 04<br />
05 855 475 F-16 8 35 9 25-573 E – – 05<br />
06 855 852 F-16 8 35 8,5 25-558 E – – 06<br />
07 855 851 F-16 8 35 8,5 25-558 E – – 07<br />
08 854/853 851/852 F-16 8 35 21 25-536 E – – 08<br />
09 806 852 F-16 8 35 21 25-536 E – – 09<br />
10 806 851 F-16 8 35 21 25-536 E – – 10<br />
11 1707 1703/1700 F-16 8 25 9 – – 125-852 E 11<br />
12 1805 1801 F-16 – 25 22 – – 125-10-22 E 12<br />
13 1806 1801 F-16 8 25 9 – – 125-907 E 13<br />
14 1807 1801 F-16 8 35 9 25-907 E – – 14<br />
15 1811 1801 F-16 8 40 9 25-907 E – – 15<br />
16 2020 2000 F-16 8 25 13 – – 125-966 E 16<br />
17 2020 2001 F-16 8 25 13 – – 125-966 E 17<br />
18 2020 2002 F-16 8 25 13 – – 125-966 E 18<br />
19 2020 2003 F-16 8 25 13 – – 125-966 E 19<br />
20 2021 2000 F-16 8 25 13 – – 125-966 E 20<br />
21 2021 2001 F-16 8 25 13 – – 125-966 E 21<br />
22 2021 2002 F-16 8 25 13 – – 125-966 E 22<br />
23 2021 2003 F-16 8 25 13 – – 125-966 E 23<br />
24 2025 1210 F-16 8 35 13 25-966 E – – 24<br />
25 2105 2100 F-16 8 25 13 – – 125-966 E 25<br />
26 2021 2410 F-16 8 25 13 – – 125-966 E 26<br />
27 2025 2410 F-16 8 35 13 25-966 E – – 27<br />
28 2027 2410 F-16 8 25 13 – – 125-966 E 28<br />
29 2105 2400 F-16 8 25 13 – – 125-900 E 29<br />
30 2020 2400 F-16 8 25 13 – – 125-900 E 30<br />
31 2021 2040 F-16 8 25 13 – – 125-900 E 31<br />
32 2025 2040 F-16 8 35 13 25-900 E – – 32<br />
33 855 400 F-16 8 35 9 25-788 E – – 33<br />
34 System Durette 34<br />
35 7800 7562 P-6-24 6 45 16 25-06-24 E – – 35<br />
36 36<br />
37 Dimat 37<br />
38 PR 14 PR 13 F-16 8 25 9 – – 125-06-20 – 38<br />
39 PR 25 PR 1 P-6-24 8 35 20 25-08-24 E – – 39<br />
40 PR 25 PR 22 P-8-24 8 35 19 25-08-24 E – – 40<br />
41 621 610-3 F-16 – 35 8,5 25-736 – – – 41<br />
42 42<br />
43 Duraflex 43<br />
44 TD 1801 TD 1802 F-16 6 35 11 25-589 E – – 44<br />
45 TD 1800 TD 1802 F-16 6 35 11 25-589 E – – 45<br />
46 46<br />
H 7
Einsatzvorschläge der Profilhersteller (alphabetische Reihenfolge)<br />
Austauschstücke<br />
Schließbleche <strong>für</strong> Zusatz-Verriegelungen Schließplatten<br />
V 1) G 2)<br />
verstellbare<br />
Ausführung<br />
Bandseitensicherungen<br />
01 01<br />
02 116-06 2325-558 2825-558 3625-558 x – 8092-658 8042-023 02<br />
03 116-06 2325-558 2825-558 3625-558 x – 8092-658 8042-023 03<br />
04 116-08 2325-573 2825-573 3625-573 – – 8092-673 8042-025 04<br />
05 116-08 2325-573 2825-573 3625-573 – – 8092-673 8042-025 05<br />
06 116-06 2325-558 2825-558 3625-558 x – 8092-658 8042-023 06<br />
07 116-06 2325-558 2825-558 3625-558 x – 8092-658 8042-023 07<br />
08 116-06-6 2325-536 2825-536 3625-536 x x 8092-636 8042-018 08<br />
09 116-06-6 2325-536 2825-536 3625-536 x x 8092-636 8042-018 09<br />
10 116-06-6 2325-536 2825-536 3625-536 x x 8092-636 8042-018 10<br />
11 116-08 2325-852 2825-852 3625-852 x – 8050-07-2-19 – 11<br />
12 116-08 2325-10-22 2825-10-22 3625-10-22 – – – 8042 12<br />
13 116-06 2325-907 2825-907 3625-907 x – 8092-645 – 13<br />
14 116-06 2325-907 2825-907 3625-907 x – 8092-645 – 14<br />
15 116-06 2325-907 2825-907 3625-907 x – 8092-645 – 15<br />
16 116-06-5 2325-966 2825-966 3625-966 x x 8092-966 – 16<br />
17 116-06-5 2325-966 2825-966 3625-966 x x 8092-966 – 17<br />
18 116-06-5 2325-966 2825-966 3625-966 x x 8092-966 – 18<br />
19 116-06-5 2325-966 2825-966 3625-966 x x 8092-966 – 19<br />
20 116-06-5 2325-966 2825-966 3625-966 x x 8092-966 – 20<br />
21 116-06-5 2325-966 2825-966 3625-966 x x 8092-966 – 21<br />
22 116-06-5 2325-966 2825-966 3625-966 x x 8092-966 – 22<br />
23 116-06-5 2325-966 2825-966 3625-966 x x 8092-966 – 23<br />
24 116-06-5 2325-966 2825-966 3625-966 x x 8092-966 – 24<br />
25 116-06-5 2325-966 2825-966 3625-966 x x 8050-07-2-18 – 25<br />
26 116-06-5 2325-966 2825-966 3625-966 x x 8092-966 – 26<br />
27 116-06-5 2325-966 2825-966 3625-966 x x 8092-966 – 27<br />
28 116-06-5 2325-966 2825-966 3625-966 x x 8092-966 – 28<br />
29 116-06-6 2325-900 2825-900 3625-900 x x 8092-615 – 29<br />
30 116-06-6 2325-900 2825-900 3625-900 x x 8092-615 – 30<br />
31 116-06-6 2325-900 2825-900 3625-900 x x 8092-615 – 31<br />
32 116-06-6 2325-900 2825-900 3625-900 x x 8092-615 _– 32<br />
33 116-08 2325-788 2825-788 3625-788 x – 8092-788 – 33<br />
34 34<br />
35 116-06 2325-06-24 2825-06-24 3625-06-24 – x 8050-01-24 8042-06-24 35<br />
36 36<br />
37 37<br />
38 – 2325-06-20 2825-06-20 3625-06-20 – – 8050-01-18 8042-003 38<br />
39 116-08 2325-08-24 2825-08-24 3625-08-24 – x 8050-01-24-8 – 39<br />
40 116-08 2325-08-24 2825-08-24 3625-08-24 – x 8050-01-24-8 – 40<br />
41 – 2325-736 2825-736 3625-736 – – – – 41<br />
42 42<br />
43 43<br />
44 116-06 2325-589 2825-589 3625-589 x – 8092-689 – 44<br />
45 116-06 2325-589 2825-589 3625-589 x – 8092-689 – 45<br />
46 46<br />
1) 2) V = regulierbarer Andruck durch Exzenterdorne G = regulierbarer Andruck durch verstellbaren Gusskasten<br />
H 8
Einsatzvorschläge der Profilhersteller (alphabetische Reihenfolge)<br />
Profilhersteller · Profilsysteme Ergänzende Angaben zum Verschlusstyp Schließbleche <strong>für</strong> Hauptschlösser<br />
Flügel Rahmen Stulpausführung<br />
Rollzapfenhöhe<br />
Dornmaß<br />
Achsmaß<br />
Fallen-Riegel-<br />
Fallen-Schließblech<br />
Schließblech<br />
E = Ausführung mit Lochung <strong>für</strong> E-Öffner<br />
01 Durette siehe Deceuninck<br />
01<br />
02 02<br />
03 03<br />
04 Edil siehe Kömmerling 04<br />
05 05<br />
06 06<br />
07 Epwin 22 siehe Profile 22 07<br />
08 08<br />
09 09<br />
10 Eurofen 10<br />
11 Z 94 L 65 F-16 8 25 9 – – 125-873 E 11<br />
12 ZP 120 L 65 F-16 8 40 13 25-898 E – – 12<br />
13 13<br />
14 14<br />
15 Europlast siehe Plastival 15<br />
16 16<br />
17 17<br />
18 Explast 18<br />
19 E 612 E 600 F-16 8 45 9 25-954 E – – 19<br />
20 20<br />
21 21<br />
22 Exte 22<br />
23 6005 6010 F-16 8 45 9 25-06-20 – – – 23<br />
24 25-06-24 E – – 24<br />
25 6006 6010 F-16 8 25 9 – – 125-06-20 – 25<br />
26 125-06-24 E 26<br />
27 6009 6002 F-16 8 45 9 25-126 E – – 27<br />
28 28<br />
29 29<br />
30 F.A.L. 30<br />
31 P 620 P 601 P-6-24 8 40 13 25-542 – – – 31<br />
32 P 602 P 601 F-16 8 25 9 – – 125-542 – 32<br />
33 P 607 P 601 F-16 8 40 9 25-542 – – – 33<br />
34 34<br />
35 35<br />
36 Fersina siehe Alphacan 36<br />
37 37<br />
38 38<br />
39 Finstral 39<br />
40 D 530 D 533 F-16 – 35 13 25-114 E – – 40<br />
41 D 538 D 533 F-16 – 35 13 25-114 E – – 41<br />
42 42<br />
43 43<br />
44 Fulgurit 44<br />
45 Isop. Fl 95 Isop. Bl 68 F-16 8 45 8,5 25-505 – – – 45<br />
46 46<br />
H 9
Einsatzvorschläge der Profilhersteller (alphabetische Reihenfolge)<br />
Austauschstücke<br />
Schließbleche <strong>für</strong> Zusatz-Verriegelungen Schließplatten<br />
V 1) G 2)<br />
verstellbare<br />
Ausführung<br />
Bandseitensicherungen<br />
01 01<br />
02 02<br />
03 03<br />
04 04<br />
05 05<br />
06 06<br />
07 07<br />
08 08<br />
09 09<br />
10 10<br />
11 116-06 2325-873 2825-873 3625-873 x – 8092-873-5 – 11<br />
12 116-08-6 2325-898 2825-898 3625-898 x x 8092-898 – 12<br />
13 13<br />
14 14<br />
15 15<br />
16 16<br />
17 17<br />
18 18<br />
19 116-08 2325-954 2825-954 3625-954 x – 8092-614 – 19<br />
20 20<br />
21 21<br />
22 22<br />
23 – 2325-06-20 2825-06-20 3625-06-20 – – 8050-01-18 – 23<br />
24 116-06 24<br />
25 – 2325-06-20 2825-06-20 3625-06-20 – – 8050-01-18 – 25<br />
26 116-06 26<br />
27 116-08 2325-126 2825-126 3625-126 – – 8050-01-18 – 27<br />
28 28<br />
29 29<br />
30 30<br />
31 – 2325-542 2825-542 3625-542 x – 8092-643 – 31<br />
32 – 2325-542 2825-542 3625-542 x – 8092-642 – 32<br />
33 – 2325-542 2825-542 3625-542 x – 8092-642 – 33<br />
34 34<br />
35 35<br />
36 36<br />
37 37<br />
38 38<br />
39 39<br />
40 116-06-5 2325-114 2825-114 3625-114 x x – – 40<br />
41 116-06-5 2325-114 2825-114 3625-114 x x – – 41<br />
42 42<br />
43 43<br />
44 44<br />
45 – 2325-505 2825-505 3625-505 x – 8092-602 – 45<br />
46 46<br />
1) 2) V = regulierbarer Andruck durch Exzenterdorne G = regulierbarer Andruck durch verstellbaren Gusskasten<br />
H 10
Einsatzvorschläge der Profilhersteller (alphabetische Reihenfolge)<br />
Profilhersteller · Profilsysteme Ergänzende Angaben zum Verschlusstyp Schließbleche <strong>für</strong> Hauptschlösser<br />
Flügel Rahmen Stulpausführung<br />
Rollzapfenhöhe<br />
Dornmaß<br />
Achsmaß<br />
Fallen-Riegel-<br />
Fallen-Schließblech<br />
Schließblech<br />
E = Ausführung mit Lochung <strong>für</strong> E-Öffner<br />
01 Gealan<br />
01<br />
02 3076 3006 F-16 8 45 13 25-948 E – – 02<br />
03 3076 3007 F-16 8 45 13 25-948 E – – 03<br />
04 3076 3008 F-16 8 45 13 25-948 E – – 04<br />
05 3076 3009 F-16 8 45 13 25-948 E – – 05<br />
06 3076 3010 F-16 8 45 13 25-948 E – – 06<br />
07 3076 3011 F-16 8 45 13 25-948 E – – 07<br />
08 3076 3013 F-16 8 45 13 25-948 E – – 08<br />
09 3076 3014 F-16 8 45 13 25-948 E – – 09<br />
10 3042 3006 F-16 8 45 13 25-948 E – – 10<br />
11 3042 3007 F-16 8 45 13 25-948 E – – 11<br />
12 3042 3008 F-16 8 45 13 25-948 E – – 12<br />
13 3042 3009 F-16 8 45 13 25-948 E – – 13<br />
14 3042 3010 F-16 8 45 13 25-948 E – – 14<br />
15 3042 3011 F-16 8 45 13 25-948 E – – 15<br />
16 3042 3013 F-16 8 45 13 25-948 E – – 16<br />
17 3042 3014 F-16 8 45 13 25-948 E – – 17<br />
18 3076 3301 F-16 8 45 13 25-585 E – – 18<br />
19 8076 8008 F-16 8 45 13 25-857 E – – 19<br />
20 8076 8008 F-24 8 45 13 25-857 E – – 20<br />
21 21<br />
22 22<br />
23 23<br />
24 24<br />
25 25<br />
26 Gromathic 26<br />
27 GM 3121 GM 3128 P-6-24 – 45 16 20-563 E – – 27<br />
28 GM 3121 GM 3108 P-6-24 – 45 16 20-563 E – – 28<br />
29 GM 3131 GM 3108 P-6-24 – 45 16 20-563 E – – 29<br />
30 GM 3131 GM 3128 P-6-24 – 45 16 20-563 E – – 30<br />
31 GM 2601 GM 2408 F-16 8 35 10 25-587 E – – 31<br />
32 GM 3005 GM 3008 F-16 8 40 9 25-744 E – – 32<br />
33 33<br />
34 34<br />
35 35<br />
36 Helling 36<br />
37 7130 BL 6740 F-16 – 45 18 20-520 E – – 37<br />
38 7130 BL 8040 F-16 – 45 18 20-520 E – – 38<br />
39 7130 BL 7030 F-16 – 45 18 20-520 E – – 39<br />
40 7130 HS 1040 F-16 – 45 18 20-520 E – – 40<br />
41 41<br />
42 42<br />
43 43<br />
44 44<br />
45 45<br />
46 46<br />
H 11
Einsatzvorschläge der Profilhersteller (alphabetische Reihenfolge)<br />
Austauschstücke<br />
Schließbleche <strong>für</strong> Zusatz-Verriegelungen Schließplatten<br />
V 1) G 2)<br />
verstellbare<br />
Ausführung<br />
Bandseitensicherungen<br />
01 01<br />
02 116-08-5 2325-948 2825-948 3625-948 x x 8092-948 8042-026 02<br />
03 116-08-5 2325-948 2825-948 3625-948 x x 8092-948 8042-026 03<br />
04 116-08-5 2325-948 2825-948 3625-948 x x 8092-948 8042-026 04<br />
05 116-08-5 2325-948 2825-948 3625-948 x x 8092-948 8042-026 05<br />
06 116-08-5 2325-948 2825-948 3625-948 x x 8092-948 8042-026 06<br />
07 116-08-5 2325-948 2825-948 3625-948 x x 8092-948 8042-026 07<br />
08 116-08-5 2325-948 2825-948 3625-948 x x 8092-948 8042-026 08<br />
09 116-08-5 2325-948 2825-948 3625-948 x x 8092-948 8042-026 09<br />
10 116-08-5 2325-948 2825-948 3625-948 x x 8092-948 8042-026 10<br />
11 116-08-5 2325-948 2825-948 3625-948 x x 8092-948 8042-026 11<br />
12 116-08-5 2325-948 2825-948 3625-948 x x 8092-948 8042-026 12<br />
13 116-08-5 2325-948 2825-948 3625-948 x x 8092-948 8042-026 13<br />
14 116-08-5 2325-948 2825-948 3625-948 x x 8092-948 8042-026 14<br />
15 116-08-5 2325-948 2825-948 3625-948 x x 8092-948 8042-026 15<br />
16 116-08-5 2325-948 2825-948 3625-948 x x 8092-948 8042-026 16<br />
17 116-08-5 2325-948 2825-948 3625-948 x x 8092-948 8042-026 17<br />
18 116-06-5 2325-585 2825-585 3625-585 x x 8092-685 – 18<br />
19 116-06-5 2325-857 2825-857 3625-857 x x 8050-07-2-11 – 19<br />
20 116-06-5 2325-857 2825-857 3625-857 x x 8050-07-2-11 – 20<br />
21 21<br />
22 22<br />
23 23<br />
24 24<br />
25 25<br />
26 26<br />
27 115-15 2320-563 2820-563 3620-563 – x – 8042-060 27<br />
28 115-15 2320-563 2820-563 3620-563 – x – 8042-060 28<br />
29 115-15 2320-563 2820-563 3620-563 – x – 8042-060 29<br />
30 115-15 2320-563 2820-563 3620-563 – x – 8042-060 30<br />
31 116-06 2325-587 2825-587 3625-587 x – 8092-687 8042-039 31<br />
32 116-06 2325-744 2825-744 3625-744 x – 8092-619 8042-015 32<br />
33 33<br />
34 34<br />
35 35<br />
36 36<br />
37 115-13 2320-520 2820-520 3620-520 x – – – 37<br />
38 115-13 2320-520 2820-520 3620-520 x – – – 38<br />
39 115-13 2320-520 2820-520 3620-520 x – – – 39<br />
40 115-13 2320-520 2820-520 3620-520 x – – – 40<br />
41 41<br />
42 42<br />
43 43<br />
44 44<br />
45 45<br />
46 46<br />
1) 2) V = regulierbarer Andruck durch Exzenterdorne G = regulierbarer Andruck durch verstellbaren Gusskasten<br />
H 12
Einsatzvorschläge der Profilhersteller (alphabetische Reihenfolge)<br />
Profilhersteller · Profilsysteme Ergänzende Angaben zum Verschlusstyp Schließbleche <strong>für</strong> Hauptschlösser<br />
Flügel Rahmen Stulpausführung<br />
Rollzapfenhöhe<br />
Dornmaß<br />
Achsmaß<br />
Fallen-Riegel-<br />
Fallen-Schließblech<br />
Schließblech<br />
E = Ausführung mit Lochung <strong>für</strong> E-Öffner<br />
01 Helmitin<br />
01<br />
02 4-60087 4-60059 F-16 8 45 16,25 25-575 E – – 02<br />
03 4-60084 4-60059 F-16 8 45 16,25 25-575 E – – 03<br />
04 4-60084 4-60067 F-16 8 45 16,25 25-575 E – – 04<br />
05 4-60084 4-60082 F-16 8 45 16,25 25-575 E – – 05<br />
06 4-60087 4-60111 F-16 8 45 16,25 25-588 E – – 06<br />
07 4-60084 4-60111 F-16 8 45 16,25 25-588 E – – 07<br />
08 4-60193 4-60180 F-16 – 45 12 25-588-2 E – – 08<br />
09 F-16 – 45 12 25-722 E – – 09<br />
10 4-60194 4-60180 F-16 – 45 12 25-588-2 E – – 10<br />
11 F-16 – 45 12 25-722 E – – 11<br />
12 4-60193 4-60182 F-16 – 45 12 25-588-2 E – – 12<br />
13 F-16 – 45 12 25-722 E – – 13<br />
14 4-60194 4-60182 F-16 – 45 12 25-588-2 E – – 14<br />
15 F-16 – 45 12 25-722 E – – 15<br />
16 4-60190 4-60180 F-16 – 30 12 – – 125-588-2 E 16<br />
17 F-16 – 30 12 – – 125-722 E 17<br />
18 4-60191 4-60180 F-16 – 30 12 – – 125-588-2 E 18<br />
19 F-16 – 30 12 – – 125-722 E 19<br />
20 20<br />
21 21<br />
22 Home 22<br />
23 FHT 115 B 80 P-6-24 8 45 14,5 25-08-24 E – – 23<br />
24 24<br />
25 25<br />
26 INEFA 26<br />
27 Z80 HT 27<br />
28 1009 1001 F-16 8 45 9 25-547 E – – 28<br />
29 Kontur 2000 29<br />
30 1209 1201 F-16 8 55 9 25-547 E – – 30<br />
31 31<br />
32 32<br />
33 ISO 60 33<br />
34 ISO 17 ISO 1 F-16 8 35 9 25-963 E – – 34<br />
35 35<br />
36 36<br />
37 Isobelec 37<br />
38 GZ 126 D 70 P-6-24 6 35 11 25-512 – – – 38<br />
39 25-08-24 E 39<br />
40 40<br />
41 41<br />
42 KBE 42<br />
43 715 alt 107 F-16 8 40 8,5 25-535 E – – 43<br />
44 715 alt 306 F-16 8 40 8,5 25-535 E – – 44<br />
45 714 alt 107 F-16 8 40 8,5 25-535 E – – 45<br />
46 714 alt 306 F-16 8 40 8,5 25-535 E – – 46<br />
H 13
Einsatzvorschläge der Profilhersteller (alphabetische Reihenfolge)<br />
Austauschstücke<br />
Schließbleche <strong>für</strong> Zusatz-Verriegelungen Schließplatten<br />
V 1) G 2)<br />
verstellbare<br />
Ausführung<br />
Bandseitensicherungen<br />
01 01<br />
02 116-06-6 2325-575 2825-575 3625-575 x x 8092-611 8042-047 02<br />
03 116-06-6 2325-575 2825-575 3625-575 x x 8092-611 8042-047 03<br />
04 116-06-6 2325-575 2825-575 3625-575 x x 8092-611 8042-047 04<br />
05 116-06-6 2325-575 2825-575 3625-575 x x 8092-611 8042-047 05<br />
06 116-06-6 2325-588 2825-588 3625-588 x x 8092-688 – 06<br />
07 116-06-6 2325-588 2825-588 3625-588 x x 8092-688 – 07<br />
08 116-06-5 2325-588-2 2825-588-2 3625-588-2 x x – – 08<br />
09 116-08-5 2325-722 2825-722 3625-722 x x – – 09<br />
10 116-06-5 2325-588-2 2825-588-2 3625-588-2 x x – – 10<br />
11 116-08-5 2325-722 2825-722 3625-722 x x – – 11<br />
12 116-06-5 2325-588-2 2825-588-2 3625-588-2 x x – – 12<br />
13 116-08-5 2325-722 2825-722 3625-722 x x – – 13<br />
14 116-06-5 2325-588-2 2825-588-2 3625-588-2 x x – – 14<br />
15 116-08-5 2325-722 2825-722 3625-722 x x – – 15<br />
16 116-06-5 2325-588-2 2825-588-2 3625-588-2 x x – – 16<br />
17 116-08-5 2325-722 2825-722 3625-722 x x – – 17<br />
18 116-06-5 2325-588-2 2825-588-2 3625-588-2 x x – – 18<br />
19 116-08-5 2325-722 2825-722 3625-722 x x – – 19<br />
20 20<br />
21 21<br />
22 22<br />
23 116-08-5 2325-08-24 2825-08-24 3625-08-24 x x 8050-01-24-8 8042-004 23<br />
24 24<br />
25 25<br />
26 26<br />
27 27<br />
28 116-08 2325-547 2825-547 3625-547 x – 8092-647 8042-019 28<br />
29 29<br />
30 116-08 2325-547 2825-547 3625-547 x – 8092-647 8042-098 30<br />
31 31<br />
32 32<br />
33 33<br />
34 116-08 2325-963 2825-963 3625-963 x – 8092-963 – 34<br />
35 35<br />
36 36<br />
37 37<br />
38 – 2325-512 2825-512 3625-512 – – 8092-612 – 38<br />
39 116-08-5 2325-512 2825-512 3625-512 – – 8092-612 – 39<br />
40 40<br />
41 41<br />
42 42<br />
43 116-08 2325-535 2825-535 3625-535 x – 8092-645 8042-017 43<br />
44 116-08 2325-535 2825-535 3625-535 x – 8092-645 8042-017 44<br />
45 116-08 2325-535 2825-535 3625-535 x – 8092-645 8042-017 45<br />
46 116-08 2325-535 2825-535 3625-535 x – 8092-645 8042-017 46<br />
1) 2) V = regulierbarer Andruck durch Exzenterdorne G = regulierbarer Andruck durch verstellbaren Gusskasten<br />
H 14
Einsatzvorschläge der Profilhersteller (alphabetische Reihenfolge)<br />
Profilhersteller · Profilsysteme Ergänzende Angaben zum Verschlusstyp Schließbleche <strong>für</strong> Hauptschlösser<br />
Flügel Rahmen Stulpausführung<br />
Rollzapfenhöhe<br />
Dornmaß<br />
Achsmaß<br />
Fallen-Riegel-<br />
Fallen-Schließblech<br />
Schließblech<br />
E = Ausführung mit Lochung <strong>für</strong> E-Öffner<br />
01 KBE (Fortsetzung)<br />
01<br />
02 715 107 P-8-24 6 45 12,9 20-570 E – – 02<br />
03 715 306 P-8-24 6 45 12,9 20-570 E – – 03<br />
04 714 107 P-8-24 6 45 12,9 20-570 E – – 04<br />
05 714 306 P-8-24 6 45 12,9 20-570 E – – 05<br />
06 112 102 F-16 8 30 9,5 – – 125-763 E 06<br />
07 714 112 F-16 – 40 9 25-862 E – – 07<br />
08 715 734 F-16 8 40 9 25-788 E – – 08<br />
09 714 734 F-16 8 40 9 25-788 E – – 09<br />
10 714 134 F-16 8 40 9 25-788-1 E – – 10<br />
11 KBE 70 mm 11<br />
12 373 370/371 F-16 – 35 13 25-945 E – – 12<br />
13 374 370/371 F-16 – 35 13 25-945 E – – 13<br />
14 378 370/371 F-16 – 45 13 25-945 E – – 14<br />
15 379 370/371 F-16 – 45 13 25-945 E – E 15<br />
16 373 385/386 F-16 – 35 13 25-945 E – – 16<br />
17 374 385/386 F-16 – 35 13 25-945 E – – 17<br />
18 378 385/386 F-16 – 45 13 25-945 E – – 18<br />
19 379 385/386 F-16 – 45 13 25-945 E – – 19<br />
20 20<br />
21 Knipping 21<br />
22 SK 1000 SK 1000 F-16 8 25 9 – – 125-06-20 – 22<br />
23 SK 3055 SK 3022 F-16 8 45 12 25-916 E – – 23<br />
24 24<br />
25 Kömmerling 25<br />
26 Eurodur 3S 26<br />
27 1416 1400 F-16 6 45 12,9 25-818 E – – 27<br />
28 F-16 6 45 12,9 25-881 E – – 28<br />
29 1416 1402 F-16 6 45 12,9 25-818 E – – 29<br />
30 F-16 6 45 12,9 25-881 E – – 30<br />
31 1415 1403 F-16 6 45 12,9 25-818 E – – 31<br />
32 F-16 6 45 12,9 25-881 E – – 32<br />
33 Eurodur-Gold 33<br />
34 1472 1461 F-16 6 40 12,9 25-857 E – – 34<br />
35 1473 1461 F-16 6 40 12,9 25-857 E – – 35<br />
36 Combidur AV 36<br />
37 3022 3012 P-6-24 6 45 12,9 25-520 E – – 37<br />
38 P-6-24 6 45 12,9 20-502 E – – 38<br />
39 3022 3000 P-6-24 6 45 12,9 25-520 E – – 39<br />
40 P-6-24 6 45 12,9 20-502 E – – 40<br />
41 3023 3012 F-16 8 40 12,9 25-520 E – – 41<br />
42 F-16 8 40 12,9 25-121 E – – 42<br />
43 3051 3012 P-6-24 8 35 14 20-502-6 E – – 43<br />
44 3051 3000 P-6-24 – 50 14 20-502-6 E – – 44<br />
45 3022 1108 P-6-24 – 40 13 25-764 E – – 45<br />
46 SP 1232 SP 1249 F-16 8 45 12,5 25-590 E – – 46<br />
H 15
Einsatzvorschläge der Profilhersteller (alphabetische Reihenfolge)<br />
Austauschstücke<br />
Schließbleche <strong>für</strong> Zusatz-Verriegelungen Schließplatten<br />
V 1) G 2)<br />
verstellbare<br />
Ausführung<br />
Bandseitensicherungen<br />
01 01<br />
02 115-15 2320-570 2820-570 3620-570 – x 8050-07-2-21 8042-026 02<br />
03 115-15 2320-570 2820-570 3620-570 – x 8050-07-2-21 8042-026 03<br />
04 115-15 2320-570 2820-570 3620-570 – x 8050-07-2-21 8042-026 04<br />
05 115-15 2320-570 2820-570 3620-570 – x 8050-07-2-21 8042-026 05<br />
06 116-08 2325-763 2825-763 3625-763 – – 8092-718 – 06<br />
07 116-06 2325-862 2825-862 3625-862 x – – – 07<br />
08 116-08 2325-788 2825-788 3625-788 x – 8092-788 – 08<br />
09 116-08 2325-788 2825-788 3625-788 x – 8092-788 – 09<br />
10 116-08 2325-788-1 2825-788-1 3625-788-1 x – 8092-788 – 10<br />
11 11<br />
12 116-08-5 2325-945 2825-945 3625-945 – x – – 12<br />
13 116-08-5 2325-945 2825-945 3625-945 – x – – 13<br />
14 116-08-5 2325-945 2825-945 3625-945 – x – – 14<br />
15 116-08-5 2325-945 2825-945 3625-945 – x – – 15<br />
16 116-08-5 2325-945 2825-945 3625-945 – x – – 16<br />
17 116-08-5 2325-945 2825-945 3625-945 – x – – 17<br />
18 116-08-5 2325-945 2825-945 3625-945 – x – – 18<br />
19 116-08-5 2325-945 2825-945 3625-945 – x – – 19<br />
20 20<br />
21 21<br />
22 – 2325-06-20 2825-06-20 3625-06-20 – – 8050-01-18 8042-003 22<br />
23 116-08-6 2325-916 2825-916 3625-916 x x 8092-729 – 23<br />
24 24<br />
25 25<br />
26 26<br />
27 116-08-5 2325-818 2825-818 3625-818 x x 8092-818-1 8042-026 27<br />
28 116-06-5 2325-881 2825-881 3625-881 x x 8092-818-1 8042-026 28<br />
29 116-08-5 2325-818 2825-818 3625-818 x x 8092-818-1 8042-026 29<br />
30 116-06-5 2325-881 2825-881 3625-881 x x 8092-818-1 8042-026 30<br />
31 116-08-5 2325-818 2825-818 3625-818 x x 8092-818-2 – 31<br />
32 116-06-5 2325-881 2825-881 3625-881 x x 8092-818-2 – 32<br />
33 33<br />
34 116-06-5 2325-857 2825-857 3625-857 x x 8050-07-2-11 – 34<br />
35 116-06-5 2325-857 2825-857 3625-857 x x 8050-07-2-11 – 35<br />
36 36<br />
37 116-06-5 2325-520 2825-520 3625-520 x x 8050-07-2 8042-007 37<br />
38 115-15 2320-502 2820-502 3620-502 x x 8050-07-2 8042-007 38<br />
39 116-06-5 2325-520 2825-520 3625-520 x x 8050-07-2 8042-007 39<br />
40 115-15 2320-502 2820-502 3620-502 x x 8050-07-2 8042-007 40<br />
41 116-06-5 2325-520 2825-520 3625-520 x x 8050-07-2 8042-089 41<br />
42 116-08-5 2325-121 2825-121 3625-121 x x 8050-07-2 8042-089 42<br />
43 115-15 2320-502-6 2820-502-6 3620-502-6 x x 8092-605 8042-090 43<br />
44 115-15 2320-502-6 2820-502-6 3620-502-6 x x – 8042-090 44<br />
45 116-06-5 2325-764 2825-764 3625-764 x x – – 45<br />
46 116-06-5 2325-590 2825-590 3625-590 x x 8092-690 8042-026 46<br />
1) 2) V = regulierbarer Andruck durch Exzenterdorne G = regulierbarer Andruck durch verstellbaren Gusskasten<br />
H 16
Einsatzvorschläge der Profilhersteller (alphabetische Reihenfolge)<br />
Profilhersteller · Profilsysteme Ergänzende Angaben zum Verschlusstyp Schließbleche <strong>für</strong> Hauptschlösser<br />
Flügel Rahmen Stulpausführung<br />
Rollzapfenhöhe<br />
Dornmaß<br />
Achsmaß<br />
Fallen-Riegel-<br />
Fallen-Schließblech<br />
Schließblech<br />
E = Ausführung mit Lochung <strong>für</strong> E-Öffner<br />
01 Kömmerling (Vortsetzung)<br />
01<br />
02 SP 3022 1254 P-6-24 – 40 12,5 25-590 E – – 02<br />
03 SP 1416 SP 1441 F-16 6 40 12,5 25-504-6 E – – 03<br />
04 SP 1414 SP 1441 F-16 6 25 12,5 – – 125-504-6 E 04<br />
05 SP 1233 SP 1279 F-16 8 40 8,5 25-520-9 E – – 05<br />
06 06<br />
07 Kömmerling Euro-Futur 07<br />
08 0115 0102 F-16 8 45 13 25-881 E – – 08<br />
09 0116 0102 F-16 8 45 13 25-881 E – – 09<br />
10 10<br />
11 Kömmerling-Tritec (Edil) 11<br />
12 P 1300 P 1113 F-16 8 45 8* 25-978 E – – 12<br />
13 P 1112 P 1496 F-16 8 45 8* 25-978 E – – 13<br />
14 P 1112 P 1300 F-16 8 45 8* 25-978 E – – 14<br />
15 P 1113 P 1496 F-16 8 45 8* 25-978 E – – 15<br />
16 P 1678 P 1320 F-16 8 30 8* – – 125-978 E 16<br />
17 P 1678 P 1496 F-16 8 30 8* – – 125-978 E 17<br />
18 P 1678 P 1464 F-16 8 30 8* – – 125-978 E 18<br />
19 P 1678 P 1300 F-16 8 30 8* – – 125-978 E 19<br />
20 P 1113 P 1659 F-16 8 45 8* 25-978 E – – 20<br />
21 P 1113 P 1658 F-16 8 45 8* 25-978 E – – 21<br />
22 P 1112 P 1659 F-16 8 45 8* 25-978 E – – 22<br />
23 P 1678 P 1659 F-16 8 30 8* – – 125-978 E 23<br />
24 P 1678 P 1658 F-16 8 30 8* – – 125-978 E 24<br />
25 P 1112 P 1658 F-16 8 45 8* 25-978 E – – 25<br />
26 26<br />
27 27<br />
28 28<br />
29 LB-Plastic 29<br />
30 SW 7004 SW 7002 F-16 – 25 9 – – 125-523 E 30<br />
31 SW 7006 SW 7002 F-16 – 25 9 – – 125-523 E 31<br />
32 SW 7044 SW 7002 F-16 – 35 9 25-523 E – – 32<br />
33 SW 7045 SW 7002 P-6-24 6 45 9 25-06-20 – – – 33<br />
34 34<br />
35 35<br />
36 36<br />
37 LB-Profile 37<br />
38 AZ 5-2 AL 2-3 F-16 8 50 13 25-853 E – – 38<br />
39 AZ 3-2 AL 2-3 F-16 8 30 13 – – 125-853 E 39<br />
40 AZ 3-2 AL 1-3 F-16 8 30 13 – – 125-853 E 40<br />
41 AT 24-2 AL 2-3 F-16 8 50 13 25-853 E – – 41<br />
42 AT 21-2 AL 2-3 F-16 8 30 13 – – 125-853 E 42<br />
43 AT 21-2 AL 1-3 F-16 8 30 13 – – 125-853 E 43<br />
44 System Wavin 44<br />
45 Z 5 T 7 F-16 8 45 15 25-721 E – – 45<br />
46 T 10 Z 6 F-16 8 25 15 – – 125-721 E 46<br />
* Achtung: Verschluß mit abgesetzter Falle einsetzen<br />
H 17
Einsatzvorschläge der Profilhersteller (alphabetische Reihenfolge)<br />
Austauschstücke<br />
Schließbleche <strong>für</strong> Zusatz-Verriegelungen Schließplatten<br />
V 1) G 2)<br />
verstellbare<br />
Ausführung<br />
Bandseitensicherungen<br />
01 01<br />
02 116-06-5 2325-590 2825-590 3625-590 x x – 8042-053 02<br />
03 116-06-5 2325-504-6 2825-504-6 3625-504-6 x x 8092-603 – 03<br />
04 116-06-5 2325-504-6 2825-504-6 3625-504-6 x x 8092-603 – 04<br />
05 116-06 2325-520-9 2825-520-9 3625-520-9 x – 8050-07-2-9 – 05<br />
06 06<br />
07 07<br />
08 116-06-5 2325-881 2825-881 3625-881 x x 8092-818-1 – 08<br />
09 116-06-5 2325-881 2825-881 3625-881 x x 8092-818-1 – 09<br />
10 10<br />
11 11<br />
12 116-08 2325-978 2825-978 3625-978 x – 8092-628 – 12<br />
13 116-08 2325-978 2825-978 3625-978 x – 8092-628 – 13<br />
14 116-08 2325-978 2825-978 3625-978 x – 8092-628 – 14<br />
15 116-08 2325-978 2825-978 3625-978 x – 8092-628 – 15<br />
16 116-08 2325-978 2825-978 3625-978 x – 8092-628 – 16<br />
17 116-08 2325-978 2825-978 3625-978 x – 8092-628 – 17<br />
18 116-08 2325-978 2825-978 3625-978 x – 8092-628 – 18<br />
19 116-08 2325-978 2825-978 3625-978 x – 8092-628 – 19<br />
20 116-08 2325-978 2825-978 3625-978 x – 8092-628 – 20<br />
21 116-08 2325-978 2825-978 3625-978 x – 8092-628 – 21<br />
22 116-08 2325-978 2825-978 3625-978 x – 8092-628 – 22<br />
23 116-08 2325-978 2825-978 3625-978 x – 8092-628 – 23<br />
24 116-08 2325-978 2825-978 3625-978 x – 8092-628 – 24<br />
25 116-08 2325-978 2825-978 3625-978 x – 8092-628 – 25<br />
26 26<br />
27 27<br />
28 28<br />
29 29<br />
30 116-08 2325-523 2825-523 3625-523 – – – – 30<br />
31 116-08 2325-523 2825-523 3625-523 – – – – 31<br />
32 116-08 2325-523 2825-523 3625-523 – – – – 32<br />
33 – 2325-06-20 2825-06-20 3625-06-20 – – 8050-01-20 – 33<br />
34 34<br />
35 35<br />
36 36<br />
37 37<br />
38 116-06-5 2325-853 2825-853 3625-853 x x 8050-07-2-12 – 38<br />
39 116-06-5 2325-853 2825-853 3625-853 x x 8050-07-2-12 – 39<br />
40 116-06-5 2325-853 2825-853 3625-853 x x 8050-07-2-12 – 40<br />
41 116-06-5 2325-853 2825-853 3625-853 x x 8050-07-2-12 – 41<br />
42 116-06-5 2325-853 2825-853 3625-853 x x 8050-07-2-12 – 42<br />
43 116-06-5 2325-853 2825-853 3625-853 x x 8050-07-2-12 – 43<br />
44 44<br />
45 116-06-5 2325-721 2825-721 3625-721 x x 8092-721 – 45<br />
46 116-06-5 2325-721 2825-721 3625-721 x x 8092-721 – 46<br />
1) 2) V = regulierbarer Andruck durch Exzenterdorne G = regulierbarer Andruck durch verstellbaren Gusskasten<br />
H 18
Einsatzvorschläge der Profilhersteller (alphabetische Reihenfolge)<br />
Profilhersteller · Profilsysteme Ergänzende Angaben zum Verschlusstyp Schließbleche <strong>für</strong> Hauptschlösser<br />
Flügel Rahmen Stulpausführung<br />
Rollzapfenhöhe<br />
Dornmaß<br />
Achsmaß<br />
Fallen-Riegel-<br />
Fallen-Schließblech<br />
Schließblech<br />
E = Ausführung mit Lochung <strong>für</strong> E-Öffner<br />
01 Lucobay<br />
01<br />
02 53/08 53/21 F-16 – 45 12,5 25-939 E – – 02<br />
03 53/05 51/32 F-16 8 35 14 25-788 E – – 03<br />
04 04<br />
05 Marley 05<br />
06 EW 17 EW 11 P-6-24 6 45 15 25-06-24 E – – 06<br />
07 07<br />
08 Marshall Tufflex 08<br />
09 V 21-HS F 21-57 F-16 8 35 21 25-821 E – – 09<br />
10 10<br />
11 Osmo 11<br />
12 Compress F 12<br />
13 2195 2171 F-16 8 55 8* 25-706 E – – 13<br />
14 F-16 8 55 8* 25-799 E – – 14<br />
15 2190 2171 F-16 8 40 8* 25-706 E – – 15<br />
16 F-16 8 40 8* 25-799 E – – 16<br />
17 Compress S 17<br />
18 2615 2602 F-16 8 30 13 – – 125-113 – 18<br />
19 2617 2602 F-16 8 30 13 – – 125-113 – 19<br />
20 Comtess S 20<br />
21 2544 2534 F-20 8 50 13 25-915 E – – 21<br />
22 2543 2534 F-16 8 30 13 – – 125-915 E 22<br />
23 2540 2534 F-16 8 30 13 – – 125-915 E 23<br />
24 2544 2550 F-20 8 50 13 25-733 E – – 24<br />
25 Compress B 25<br />
26 2014 2017 F-16 8 40 8* 25-563 E – – 26<br />
27 2018 2017 F-16 8 35 9 25-563 E – – 27<br />
28 28<br />
29 Petal 29<br />
30 218 221 F-16 8 25 10 – – 125-06-20 – 30<br />
31 125-06-24 E 31<br />
32 220 221 F-16 8 25 10 – – 125-06-20 – 32<br />
33 125-06-24 E 33<br />
34 34<br />
35 Plastival 35<br />
36 F 003 F 006 F-16 – 30 13 – – 125-987 E 36<br />
37 F 002 F 006 F-16 – 30 13 – – 125-987 E 37<br />
38 F 002 F 031 F-16 – 30 13 – – 125-987 E 38<br />
39 R 7012 R 7000 F-16 – 40 10 25-116 E – - 39<br />
40 R 7013 R 7000 F-16 – 40 10 25-116 E – - 40<br />
41 F 002 F 021 F-16 8 30 13 – – 125-733 E 41<br />
42 F 003 F 022 F-16 8 40 13 25-733 E – – 42<br />
43 System Europlast 43<br />
44 R 7012 R 7000 F-16 6 40 8,5 25-707 E – – 44<br />
45 45<br />
46 46<br />
* Achtung: Verschluß mit abgesetzter Falle einsetzen<br />
H 19
Einsatzvorschläge der Profilhersteller (alphabetische Reihenfolge)<br />
Austauschstücke<br />
Schließbleche <strong>für</strong> Zusatz-Verriegelungen Schließplatten<br />
V 1) G 2)<br />
verstellbare<br />
Ausführung<br />
Bandseitensicherungen<br />
01 01<br />
02 116-08-5 2325-939 2825-939 3625-939 x x – – 02<br />
03 116-08 2325-788 2825-788 3625-788 x – 8092-788 – 03<br />
04 04<br />
05 05<br />
06 116-06 2325-06-24 2825-06-24 3625-06-24 – x 8050-01-24 – 06<br />
07 07<br />
08 08<br />
09 116-08-5 2325-821 2825-821 3625-821 x x 8050-07-2-20 – 09<br />
10 10<br />
11 11<br />
12 116-06 2325-706 2825-706 3625-706 x – 8050-601 – 12<br />
13 116-08 2325-799 2825-799 3625-799 x – 8050-601 – 13<br />
14 116-06 2325-706 2825-706 3625-706 x – 8050-601 – 14<br />
15 116-08 2325-799 2825-799 3625-799 x – 8050-601 – 15<br />
16 16<br />
17 – 2325-113 2825-113 3625-113 x – 8092-958 – 17<br />
18 – 2325-113 2825-113 3625-113 x – 8092-958 – 18<br />
19 19<br />
20 116-06-5 2325-915 2825-915 3625-915 x x 8092-915 8042-087 20<br />
21 116-06-5 2325-915 2825-915 3625-915 x x 8092-915 8042-087 21<br />
22 116-06-5 2325-915 2825-915 3625-915 x x 8092-915 8042-087 22<br />
23 116-08-5 2325-733 2825-733 3625-733 x – 8092-615 – 23<br />
24 24<br />
25 116-06 2325-563 2825-563 3625-563 – – 8092-617 8042-051 25<br />
26 116-06 2325-563 2825-563 3625-563 – – 8092-617 8042-051 26<br />
27 27<br />
28 28<br />
29 29<br />
30 – 2325-06-20 2825-06-20 3625-06-20 – – 8050-01-18 – 30<br />
31 116-06 31<br />
32 – 2325-06-20 2825-06-20 3625-06-20 – – 8050-01-18 – 32<br />
33 116-06 33<br />
34 34<br />
35 35<br />
36 116-08-5 2325-987 2825-987 3625-987 – x – – 36<br />
37 116-08-5 2325-987 2825-987 3625-987 – x – – 37<br />
38 116-08-5 2325-987 2825-987 3625-987 – x – – 38<br />
39 116-06 2325-116 2825-116 3625-116 x – – – 39<br />
40 116-06 2325-116 2825-116 3625-116 x – – – 40<br />
41 116-08-5 2325-733 2825-733 3625-733 x – 8092-615 – 41<br />
42 116-08-5 2325-733 2825-733 3625-733 x – 8092-615 – 42<br />
43 43<br />
44 116-08 2325-707 2825-707 3625-707 x – 8092-707 8042-028 44<br />
45 45<br />
46 46<br />
1) 2) V = regulierbarer Andruck durch Exzenterdorne G = regulierbarer Andruck durch verstellbaren Gusskasten<br />
H 20
Einsatzvorschläge der Profilhersteller (alphabetische Reihenfolge)<br />
Profilhersteller · Profilsysteme Ergänzende Angaben zum Verschlusstyp Schließbleche <strong>für</strong> Hauptschlösser<br />
Flügel Rahmen Stulpausführung<br />
Rollzapfenhöhe<br />
Dornmaß<br />
Achsmaß<br />
Fallen-Riegel-<br />
Fallen-Schließblech<br />
Schließblech<br />
E = Ausführung mit Lochung <strong>für</strong> E-Öffner<br />
01 Plastmo 01<br />
02 2000 02<br />
03 5032080 5032020 F-16 8 45 9 25-528 E – – 03<br />
04 5032080 5032025 F-16 8 45 9 25-528 E – – 04<br />
05 Index 05<br />
06 6035080 6035025 F-16 8 35 11 25-912 E – – 06<br />
07 6035035 6035025 F-16 8 35 11 25-912 E – – 07<br />
08 08<br />
09 Plus Plan 09<br />
10 FR 99 V BR 76 F-20 8 45 13 25-945 E – – 10<br />
11 FR 119 V BR 76 F-20 8 45 13 25-945 E – – 11<br />
12 FR 85 V BR 76 F-16 8 35 13 25-945 E – – 12<br />
13 FR 105 V BR 76 F-16 8 35 13 25-945 E – – 13<br />
14 FLR 120 E BLR 80 ED F-24 8 45 12,5 25-847 E – – 14<br />
15 FLR 100 E BLR 80 ED F-24 8 45 12,5 25-847 E – – 15<br />
16 FR 85 V ST 61 F-16 – 35 13 25-764 E – – 16<br />
17 FR 99 V BR 76 F-20 8 45 13 25-178 E – – 17<br />
18 FR 105 V BR 76 F-20 8 45 13 25-178 E – – 18<br />
19 FR 85 V BR 76 F-16 8 35 13 25-178 E – – 19<br />
20 FR 99 V ST 61 F-20 – 45 13 25-764 E – – 20<br />
21 FR 85 V ST 61 F-20 – 45 13 25-764 E – – 21<br />
22 FR 105 V ST 61-PO F-20 8 45 13 25-733 E – – 22<br />
23 FR 85 V ST 61-PO F-20 8 45 13 25-733 E – – 23<br />
24 24<br />
25 Primo 25<br />
26 3382 3360 F-16 8 40 13 25-818-5 E – – 26<br />
27 3383 3360 F-16 8 40 13 25-818-5 E – – 27<br />
28 3382 3359 F-16 8 40 13 25-733 E – – 28<br />
29 29<br />
30 Profen 30<br />
31 AB 105 AS 102 F-16 8 25 9 – – 125-501 E 31<br />
32 AB 110 AS 102 F-16 8 40 9 25-501 E – – 32<br />
33 33<br />
34 Profile 22 34<br />
35 2230 2207 F-16 6 35 17 25-731-1 E – – 35<br />
36 2235 2238 F-16 – 35 17 25-991 E – – 36<br />
37 37<br />
38 Profilia siehe Alphacan 38<br />
39 39<br />
40 Pural 40<br />
41 P 022/alt P 002 F-16 – 45 9 25-569-2 E – – 41<br />
42 P 022 P 002 F-20 – 45 14,5 25-569-3 E – – 42<br />
43 P 006 P 002 F-16 8 35 11 25-569 E – – 43<br />
44 44<br />
45 45<br />
46 46<br />
H 21
Einsatzvorschläge der Profilhersteller (alphabetische Reihenfolge)<br />
Austauschstücke<br />
Schließbleche <strong>für</strong> Zusatz-Verriegelungen Schließplatten<br />
V 1) G 2)<br />
verstellbare<br />
Ausführung<br />
Bandseitensicherungen<br />
01 01<br />
02 02<br />
03 116-08 2325-528 2825-528 3625-528 – – 8092-606 – 03<br />
04 116-08 2325-528 2825-528 3625-528 – – 8092-606 – 04<br />
05 05<br />
06 116-06 2325-912 2825-912 3625-912 x – 8050-07-2-15 8042-069 06<br />
07 116-06 2325-912 2825-912 3625-912 x – 8050-07-2-15 8042-069 07<br />
08 08<br />
09 09<br />
10 116-08-5 2325-945 2825-945 3625-945 x x 8092-945 8042-062 10<br />
11 116-08-5 2325-945 2825-945 3625-945 x x 8092-945 8042-062 11<br />
12 116-08-5 2325-945 2825-945 3625-945 x x 8092-945 8042-062 12<br />
13 116-08-5 2325-945 2825-945 3625-945 x x 8092-945 8042-062 13<br />
14 116-06-5 2325-847 2825-847 3625-847 x x 8092-847 8042-029 14<br />
15 116-06-5 2325-847 2825-847 3625-847 x x 8092-847 8042-029 15<br />
16 116-06-5 2325-764 2825-764 3625-764 x x – – 16<br />
17 115-5-3 2325-178 2825-178 3625-178 – x 8092-178 8042-062 17<br />
18 115-5-3 2325-178 2825-178 3625-178 – x 8092-178 8042-062 18<br />
19 115-5-3 2325-178 2825-178 3625-178 – x 8092-178 8042-062 19<br />
20 115-5-3 2325-764 2825-764 3625-764 – x – – 20<br />
21 115-5-3 2325-764 2825-764 3625-764 – x – – 21<br />
22 115-5-3 2325-733 2825-733 3625-733 x – 8092-615 – 22<br />
23 115-5-3 2325-733 2825-733 3625-733 x – 8092-615 – 23<br />
24 24<br />
25 25<br />
26 116-08-5 2325-818-5 2825-818-5 3625-818-5 x x 8092-818-5 – 26<br />
27 116-08-5 2325-818-5 2825-818-5 3625-818-5 x x 8092-818-5 – 27<br />
28 116-08-5 2325-733 2825-733 3625-733 x – 8092-615 – 28<br />
29 29<br />
30 30<br />
31 116-06 2325-501 2825-501 3625-501 x – 8092-601 – 31<br />
32 116-06 2325-501 2825-501 3625-501 x – 8092-601 – 32<br />
33 33<br />
34 34<br />
35 116-06-8 2325-731-1 2825-731-1 3625-731-1 x x 8092-731 – 35<br />
36 116-06-8 2325-991 2825-991 3625-991 x x – – 36<br />
37 37<br />
38 38<br />
39 39<br />
40 40<br />
41 116-08 2325-569-2 2825-569-2 3625-569-2 x – – – 05<br />
42 116-06-6 2325-569-3 2825-569-3 3625-569-3 x x – – 06<br />
43 116-08 2325-569 2825-569 3625-569 x – 8092-669 – 43<br />
44 44<br />
45 45<br />
46 46<br />
1) 2) V = regulierbarer Andruck durch Exzenterdorne G = regulierbarer Andruck durch verstellbaren Gusskasten<br />
H 22
Einsatzvorschläge der Profilhersteller (alphabetische Reihenfolge)<br />
Profilhersteller · Profilsysteme Ergänzende Angaben zum Verschlusstyp Schließbleche <strong>für</strong> Hauptschlösser<br />
Flügel Rahmen Stulpausführung<br />
Rollzapfenhöhe<br />
Dornmaß<br />
Achsmaß<br />
Fallen-Riegel-<br />
Fallen-Schließblech<br />
Schließblech<br />
E = Ausführung mit Lochung <strong>für</strong> E-Öffner<br />
01 Rehau 01<br />
02 Serie 706 02<br />
03 546210 546180 F-16 – 35 9 25-947 E – – 03<br />
04 546220 546180 F-16 – 35 9 25-947 E – – 04<br />
05 Serie 707 05<br />
06 622332 547110 P-6-24 – 25 37 – – 125-10-24-1 E 06<br />
07 547100 547110 P-6-24 – 45 37 25-10-24-1 E – – 07<br />
08 Serie 730 08<br />
09 541150 (T) 554161 (76) F-16 8 45 13 25-915 E – – 09<br />
10 541150 (T) 554121 (76/1) F-16 8 45 13 25-915 E – – 10<br />
11 541150 (T) 554041 (68) F-16 8 45 13 25-915 E – – 11<br />
12 541130 (Z) 554161 (76) F-16 8 45 13 25-915 E – – 12<br />
13 541130 (Z) 554121 (76/1) F-16 8 45 13 25-915 E – – 13<br />
14 541130 (Z) 554041 (68) F-16 8 45 13 25-915 E – – 14<br />
15 541160 (Z 74) 554161 (76) F-16 8 25 13 – – 125-915 E 15<br />
16 541160 (Z 74) 554121 (76/1) F-16 8 25 13 – – 125-915 E 16<br />
17 541160 (Z 74) 554041 (68) F-16 8 25 13 – – 125-915 E 17<br />
18 541170 (T 94) 541029 F-16 8 25 13 – – 125-999 E 18<br />
19 541130 (Z) 541140 F-16 8 45 13 25-733 E – – 19<br />
20 541130 (Z) 541100 F-16 8 45 13 25-733 E – – 20<br />
21 541150 (T) 541100 F-16 8 45 13 25-733 E – – 21<br />
22 Serie 709 22<br />
23 560220 608052 F-16 8 40 9 25-507 E – – 23<br />
24 609862 608052 F-16 8 35 9 25-507 E – – 24<br />
25 609662 549090 F-16 8 25 9 – – 125-507 E 25<br />
26 549050 549110 F-16 8 25 9,5 – – 125-557-01 E 26<br />
27 560220 560490 F-16 – 45 9 25-762 E – – 27<br />
28 551060 551080 F-16 8 40 9 25-886 E – – 28<br />
29 551480 551150 F-16 8 45 9 25-886 E – – 29<br />
30 Serie 799 30<br />
31 550170 (T) 550000 (68) F-24 8 45 13 25-915 E – – 31<br />
32 550170 (T) 550010 (76) F-24 8 45 13 25-915 E – – 32<br />
33 550170 (T) 550420 (76/1) F-24 8 45 13 25-915 E – – 33<br />
34 550160 (Z) 550000 (68) F-24 8 45 13 25-915 E – – 34<br />
35 550160 (Z) 550010 (76) F-24 8 45 13 25-915 E – – 35<br />
36 550160 (Z) 550420 (76/1) F-24 8 45 13 25-915 E – – 36<br />
37 37<br />
38 Roplasto/6001 38<br />
39 618502 N 611400 F-16 – 35 11 25-592 E – – 39<br />
40 618502 N 610102 F-16 – 35 11 25-592 E – – 40<br />
41 618502 N 619003 F-16 – 35 11 25-725 E – – 41<br />
42 618502 N 619100 F-16 – 35 11 25-725 E – – 42<br />
43 629802 H 611400 F-16 – 50 11 25-592 E – – 43<br />
44 44<br />
45 Roplasto/7001 45<br />
46 220400 210700 F-16 – 40 13 25-117 E – – 46<br />
H 23
Einsatzvorschläge der Profilhersteller (alphabetische Reihenfolge)<br />
Austauschstücke<br />
Schließbleche <strong>für</strong> Zusatz-Verriegelungen Schließplatten<br />
V 1) G 2)<br />
verstellbare<br />
Ausführung<br />
Bandseitensicherungen<br />
01 01<br />
02 02<br />
03 116-08 2325-947 2825-947 3625-947 x – – – 03<br />
04 116-08 2325-947 2825-947 3625-947 x – – – 04<br />
05 05<br />
06 116-08 2325-10-24-1 2825-10-24-1 3625-10-24-1 – – – – 06<br />
07 116-08 2325-10-24-1 2825-10-24-1 3625-10-24-1 – – – – 07<br />
08 08<br />
09 116-06-5 2325-915 2825-915 3625-915 x x 8092-915 8042-050 09<br />
10 116-06-5 2325-915 2825-915 3625-915 x x 8092-915 8042-050 10<br />
11 116-06-5 2325-915 2825-915 3625-915 x x 8092-915 8042-050 11<br />
12 116-06-5 2325-915 2825-915 3625-915 x x 8092-915 8042-050 12<br />
13 116-06-5 2325-915 2825-915 3625-915 x x 8092-915 8042-050 13<br />
14 116-06-5 2325-915 2825-915 3625-915 x x 8092-915 8042-050 14<br />
15 116-06-5 2325-915 2825-915 3625-915 x x 8092-915 8042-050 15<br />
16 116-06-5 2325-915 2825-915 3625-915 x x 8092-915 8042-050 16<br />
17 116-06-5 2325-915 2825-915 3625-915 x x 8092-915 8042-050 17<br />
18 116-08-5 2325-999 2825-999 3625-999 x x 8092-999 – 18<br />
19 116-08-5 2325-733 2825-733 3625-733 x – 8092-615 – 19<br />
20 116-08-5 2325-733 2825-733 3625-733 x – 8092-615 – 20<br />
21 116-08-5 2325-733 2825-733 3625-733 x – 8092-615 – 21<br />
22 22<br />
23 116-08 2325-507 2825-507 3625-507 x – 8092-608 8042-012 23<br />
24 116-08 2325-507 2825-507 3625-507 x – 8092-608 8042-012 24<br />
25 116-08 2325-507 2825-507 3625-507 x – 8092-608 8042-012 25<br />
26 116-06 2325-557-01 2825-557-01 3625-557-01 x – 8092-608 – 26<br />
27 116-06 2325-762 2825-762 3625-762 – – – – 27<br />
28 116-06 2325-886 2825-886 3625-886 x – 8092-886 – 28<br />
29 116-06 2325-886 2825-886 3625-886 x – 8092-886 – 29<br />
30 30<br />
31 116-06-5 2325-915 2825-915 3625-915 x x 8092-915 8042-050 31<br />
32 116-06-5 2325-915 2825-915 3625-915 x x 8092-915 8042-050 32<br />
33 116-06-5 2325-915 2825-915 3625-915 x x 8092-915 8042-050 33<br />
34 116-06-5 2325-915 2825-915 3625-915 x x 8092-915 8042-050 34<br />
35 116-06-5 2325-915 2825-915 3625-915 x x 8092-915 8042-050 35<br />
36 116-06-5 2325-915 2825-915 3625-915 x x 8092-915 8042-050 36<br />
37 37<br />
38 38<br />
39 116-06 2325-592 2825-592 3625-592 x – – – 39<br />
40 116-06 2325-592 2825-592 3625-592 x – – – 40<br />
41 116-08 2325-725 2825-725 3625-725 x – – – 41<br />
42 116-08 2325-725 2825-725 3625-725 x – – – 42<br />
43 116-06 2325-592 2825-592 3625-592 x – – – 43<br />
44 44<br />
45 45<br />
46 116-08-5 2325-117 2825-117 3625-117 x x – – 46<br />
1) 2) V = regulierbarer Andruck durch Exzenterdorne G = regulierbarer Andruck durch verstellbaren Gusskasten<br />
H 24
Einsatzvorschläge der Profilhersteller (alphabetische Reihenfolge)<br />
Profilhersteller · Profilsysteme Ergänzende Angaben zum Verschlusstyp Schließbleche <strong>für</strong> Hauptschlösser<br />
Flügel Rahmen Stulpausführung<br />
Rollzapfenhöhe<br />
Dornmaß<br />
Achsmaß<br />
Fallen-Riegel-<br />
Fallen-Schließblech<br />
Schließblech<br />
E = Ausführung mit Lochung <strong>für</strong> E-Öffner<br />
01 Roplasto (Fortsetzung)/7001<br />
01<br />
02 220400 210800 F-16 – 40 13 25-117 E – – 02<br />
03 220400 210900 F-16 – 40 13 25-117 E – – 03<br />
04 220400 210400 F-16 – 40 13 25-117 E – – 04<br />
05 220600* 210700 F-20 – 55 13 25-117 E – – 05<br />
06 220600* 210800 F-20 – 55 13 25-117 E – – 06<br />
07 220600* 210900 F-20 – 55 13 25-117 E – – 07<br />
08 220600* 210400 F-20 – 55 13 25-117 E – – 08<br />
09 220500 210700 F-16 – 40 13 25-117 E – – 09<br />
10 220500 210800 F-16 – 40 13 25-117 E – – 10<br />
11 220500 210900 F-16 – 40 13 25-117 E – – 11<br />
12 220500 210400 F-16 – 40 13 25-117 E – – 12<br />
13 220700 210700 F-20 – 50 13 25-117 E – – 13<br />
14 220700 210800 F-20 – 50 13 25-117 E – – 14<br />
15 220700 210900 F-20 – 50 13 25-117 E – – 15<br />
16 220700 210400 F-20 – 50 13 25-117 E – – 16<br />
17 17<br />
18 Salamander 18<br />
19 211040 210020 F-20 – 45 13 25-153-1 E – – 19<br />
20 211040 210030 F-20 – 45 13 25-153-1 E – – 20<br />
21 211040 230026 F-20 – 45 13 25-153-1 E – – 21<br />
22 211040 230036 F-20 – 45 13 25-153-1 E – – 22<br />
23 211140 210020 F-20 – 45 13 25-153-1 E – – 23<br />
24 211140 210030 F-20 – 45 13 25-153-1 E – – 24<br />
25 211140 230026 F-20 – 45 13 25-153-1 E – – 25<br />
26 211140 230036 F-20 – 45 13 25-153-1 E – – 26<br />
27 211140 110225 F-20 – 45 13 25-153-1 E – – 27<br />
28 211140 110220 F-20 – 45 13 25-153-1 E – – 28<br />
29 211240 210020 F-20 – 45 13 25-153-1 E – – 29<br />
30 211240 210030 F-20 – 45 13 25-153-1 E – – 30<br />
31 211240 230026 F-20 – 45 13 25-153-1 E – – 31<br />
32 211240 230036 F-20 – 45 13 25-153-1 E – – 32<br />
33 211240 110225 F-20 – 45 13 25-153-1 E – – 33<br />
34 211240 110220 F-20 – 45 13 25-153-1 E – – 34<br />
35 311040 210020 F-20 – 45 13 25-153-1 E – – 35<br />
36 311040 210030 F-20 – 45 13 25-153-1 E – – 36<br />
37 251040 250230 F-20 – 45 13 25-153-1 E – – 37<br />
38 351040 250230 F-20 – 45 13 25-153-1 E – – 38<br />
39 39<br />
40 Scanorama 40<br />
41 SH 67 SH 50 F-16 8 25 9 – – 125-870 E 41<br />
42 SH 95 SH 50 F-16 8 25 9 – – 125-870 E 42<br />
43 43<br />
44 Schock-Thermassiv 44<br />
45 FH BH F-16 8 45 10 25-06-24 E – – 45<br />
46 FG WP F-16 8 35 20 25-733 E – – 46<br />
* Hauptschlosskasten mit 17,5 mm Hinterdornmaß<br />
H 25
Einsatzvorschläge der Profilhersteller (alphabetische Reihenfolge)<br />
Austauschstücke<br />
Schließbleche <strong>für</strong> Zusatz-Verriegelungen Schließplatten<br />
V 1) G 2)<br />
verstellbare<br />
Ausführung<br />
Bandseitensicherungen<br />
01 01<br />
02 116-08-5 2325-117 2825-117 3625-117 x x – – 02<br />
03 116-08-5 2325-117 2825-117 3625-117 x x – – 03<br />
04 116-08-5 2325-117 2825-117 3625-117 x x – – 04<br />
05 116-08-5 2325-117 2825-117 3625-117 x x – – 05<br />
06 116-08-5 2325-117 2825-117 3625-117 x x – – 06<br />
07 116-08-5 2325-117 2825-117 3625-117 x x – – 07<br />
08 116-08-5 2325-117 2825-117 3625-117 x x – – 08<br />
09 116-08-5 2325-117 2825-117 3625-117 x x – – 09<br />
10 116-08-5 2325-117 2825-117 3625-117 x x – – 10<br />
11 116-08-5 2325-117 2825-117 3625-117 x x – – 11<br />
12 116-08-5 2325-117 2825-117 3625-117 x x – – 12<br />
13 116-08-5 2325-117 2825-117 3625-117 x x – – 13<br />
14 116-08-5 2325-117 2825-117 3625-117 x x – – 14<br />
15 116-08-5 2325-117 2825-117 3625-117 x x – – 15<br />
16 116-08-5 2325-117 2825-117 3625-117 x x – – 16<br />
17 17<br />
18 18<br />
19 116-08-5 2325-153-1 2825-153-1 3625-153-1 x x – – 19<br />
20 116-08-5 2325-153-1 2825-153-1 3625-153-1 x x – – 20<br />
21 116-08-5 2325-153-1 2825-153-1 3625-153-1 x x – – 21<br />
22 116-08-5 2325-153-1 2825-153-1 3625-153-1 x x – – 22<br />
23 116-08-5 2325-153-1 2825-153-1 3625-153-1 x x – – 23<br />
24 116-08-5 2325-153-1 2825-153-1 3625-153-1 x x – – 24<br />
25 116-08-5 2325-153-1 2825-153-1 3625-153-1 x x – – 25<br />
26 116-08-5 2325-153-1 2825-153-1 3625-153-1 x x – – 26<br />
27 116-08-5 2325-153-1 2825-153-1 3625-153-1 x x – – 27<br />
28 116-08-5 2325-153-1 2825-153-1 3625-153-1 x x – – 28<br />
29 116-08-5 2325-153-1 2825-153-1 3625-153-1 x x – – 29<br />
30 116-08-5 2325-153-1 2825-153-1 3625-153-1 x x – – 30<br />
31 116-08-5 2325-153-1 2825-153-1 3625-153-1 x x – – 31<br />
32 116-08-5 2325-153-1 2825-153-1 3625-153-1 x x – – 32<br />
33 116-08-5 2325-153-1 2825-153-1 3625-153-1 x x – – 33<br />
34 116-08-5 2325-153-1 2825-153-1 3625-153-1 x x – – 34<br />
35 116-08-5 2325-153-1 2825-153-1 3625-153-1 x x – – 35<br />
36 116-08-5 2325-153-1 2825-153-1 3625-153-1 x x – – 36<br />
37 116-08-5 2325-153-1 2825-153-1 3625-153-1 x x – – 37<br />
38 116-08-5 2325-153-1 2825-153-1 3625-153-1 x x – – 38<br />
39 39<br />
40 40<br />
41 116-08 2325-870 2825-870 3625-870 x – 8092-608 – 41<br />
42 116-08 2325-870 2825-870 3625-870 x – 8092-608 – 42<br />
43 43<br />
44 44<br />
45 116-06 2325-06-24 2825-06-24 3625-06-24 – x 8050-01-24 8042-06-24 45<br />
46 116-08-5 2325-733 2825-733 3625-733 x – 8092-615 – 46<br />
1) 2) V = regulierbarer Andruck durch Exzenterdorne G = regulierbarer Andruck durch verstellbaren Gusskasten<br />
H 26
Einsatzvorschläge der Profilhersteller (alphabetische Reihenfolge)<br />
Profilhersteller · Profilsysteme Ergänzende Angaben zum Verschlusstyp Schließbleche <strong>für</strong> Hauptschlösser<br />
Flügel Rahmen Stulpausführung<br />
Rollzapfenhöhe<br />
Dornmaß<br />
Achsmaß<br />
Fallen-Riegel-<br />
Fallen-Schließblech<br />
Schließblech<br />
E = Ausführung mit Lochung <strong>für</strong> E-Öffner<br />
01 Spectus<br />
01<br />
02 SW 07 SW 05 F-16 – 25 9 – – 125-582 E 02<br />
03 SW 09 SW 05 F-16 8 35 9 25-788 E – – 03<br />
04 SW 709 SW 705 F-16 – 40 20 25-990 – – – 04<br />
05 05<br />
06 Status System 70 06<br />
07 906 904 F-16 – 35 9 25-910 E – – 07<br />
08 907 904 F-16 – 45 9 25-910 E – – 08<br />
09 09<br />
10 Stöckel 10<br />
11 Twin Step 11<br />
12 1212 1110 F-16 8 55 9 25-06-20 – – – 12<br />
13 25-06-24 E 13<br />
14 1212 1111 F-16 8 55 9 25-511 E – – 14<br />
15 1302 1262 F-16 8 65 9 25-788 E – – 15<br />
16 Eco-Step 16<br />
17 2262 2113 F-16 8 50 13 25-964 E – – 17<br />
18 2262 2302 F-16 – 50 13 25-124 E – – 18<br />
19 19<br />
20 Tehalit 20<br />
21 M 1180/1 M 1400 F-16 8 25 9 – – 125-506 E 21<br />
22 M 1410/1 M 1400 F-16 8 25 9 – – 125-506 E 22<br />
23 M 1432 M 1414 P-6-24 6 45 16 25-06-24 E – – 23<br />
24 M 1432/1 M 1414/1 F-16 8 45 9 25-506 E – – 24<br />
25 25<br />
26 Thyssen 26<br />
27 H2-9150 L1-0153 P-6-24 6 65 11 25-06-24 E – – 27<br />
28 H4-9060 L1-0153 F-16 8 45 9 25-06-20 – – – 28<br />
29 H4-9060 L2-0143 F-16 8 45 9 25-06-20 – – – 29<br />
30 Z1 L1 F-16 8 25 9 – – 125-06-20 – 30<br />
31 Z2 L1 F-16 8 35 9 25-06-20 – – – 31<br />
32 Z2 L2 F-16 8 35 9 25-06-20 – – – 32<br />
33 25-06-24 E 33<br />
34 H4-9060 L3-0155 F-16 8 45 9 25-801 E – – 34<br />
35 Z2-0112 L5-0123 F-16 8 25 9 – – 125-801 E 35<br />
36 Z2-0112 L3-0155 F-16 8 25 9 – – 125-801 E 36<br />
37 TS1/0111 L3-0155 F-16 8 25 9 – – 125-801 E 37<br />
38 Z2-0112 L6-0144 F-16 8 25 9 – – 125-801 E 38<br />
39 H4/13-9065 L6-0144 F-16 8 45 13 25-519-2 E – – 39<br />
40 H3/13-9055 L6-0144 F-16 8 45 13 25-519-2 E – – 40<br />
41 H30-9085 L60-0166 F-16 8 45 13 25-919 E – – 41<br />
42 H40-9090 L60-0166 F-16 8 45 13 25-919 E – – 42<br />
43 Z10 L10 F-16 8 25 13 – – 125-919 E 43<br />
44 Z20-0147 L20-0157 F-16 8 25 13 – – 125-919 E 44<br />
45 Z20-0147 L10-0156 F-16 8 25 13 – – 125-919 E 45<br />
46 TS20-0120 L10-0156 F-16 8 25 13 – – 125-919 E 46<br />
H 27
Einsatzvorschläge der Profilhersteller (alphabetische Reihenfolge)<br />
Austauschstücke<br />
Schließbleche <strong>für</strong> Zusatz-Verriegelungen Schließplatten<br />
V 1) G 2)<br />
verstellbare<br />
Ausführung<br />
Bandseitensicherungen<br />
01 01<br />
02 116-06 2325-582 2825-582 3625-582 x – – – 02<br />
03 116-08 2325-788 2825-788 3625-788 x – 8092-788 – 03<br />
04 – 2325-990 2825-990 3625-990 x x – – 04<br />
05 05<br />
06 06<br />
07 116-06 2325-910 2825-910 3625-910 x – – – 07<br />
08 116-06 2325-910 2825-910 3625-910 x – – – 08<br />
09 09<br />
10 10<br />
11 11<br />
12 – 2325-06-20 2825-06-20 3625-06-20 – – 8050-01-18 8042-003 12<br />
13 116-06 13<br />
14 115-24 2325-511 2825-511 3625-511 x – 8092-611-1 8042-048 14<br />
15 115-24 2325-788 2825-788 3625-788 x – 8092-788 – 15<br />
16 16<br />
17 116-08-5 2325-964 2825-964 3625-964 x x 8092-964 8042-071 17<br />
18 116-08-5 2325-124 2825-124 3625-124 x x – – 18<br />
19 19<br />
20 20<br />
21 116-06 2325-506 2825-506 3625-506 x – 8092-605 8042-011 21<br />
22 116-06 2325-506 2825-506 3625-506 x – 8092-605 8042-011 22<br />
23 116-06 2325-06-24 2825-06-24 3625-06-24 – x 8050-01-24 8042-06-24 23<br />
24 116-06 2325-506 2825-506 3625-506 x – 8092-605 8042-011 24<br />
24 25<br />
26 26<br />
27 116-06 2325-06-24 2825-06-24 3625-06-24 – x 8050-01-24 8042-06-24 27<br />
28 – 2325-06-20 2825-06-20 3625-06-20 – – 8050-01-18 8042-003 28<br />
29 – 2325-06-20 2825-06-20 3625-06-20 – – 8050-01-18 8042-003 29<br />
30 – 2325-06-20 2825-06-20 3625-06-20 – – 8050-01-18 8042-003 30<br />
31 – 2325-06-20 2825-06-20 3625-06-20 – – 8050-01-18 8042-003 31<br />
32 – 2325-06-20 2825-06-20 3625-06-20 – – 8050-01-18 8042-003 32<br />
33 116-06 2325-801 2825-801 3625-801 x – 8092-620 8042-027 33<br />
34 116-08 2325-801 2825-801 3625-801 x – 8092-620 8042-027 34<br />
35 116-08 2325-801 2825-801 3625-801 x – 8092-620 8042-027 35<br />
36 116-08 2325-801 2825-801 3625-801 x – 8092-620 8042-027 36<br />
37 116-08 2325-801 2825-801 3625-801 x – 8092-620 8042-027 37<br />
38 116-08 2325-919-2 2825-919-2 3625-919-2 x x 8092-919 8042-056 38<br />
39 116-08-5 2325-919-2 2825-919-2 3625-919-2 x x 8092-919 8042-056 39<br />
40 116-08-5 2325-919 2825-919 3625-919 x x 8092-919 8042-056 40<br />
41 116-08-5 2325-919 2825-919 3625-919 x x 8092-919 8042-056 41<br />
42 116-08-5 2325-919 2825-919 3625-919 x x 8092-919 8042-056 42<br />
43 116-08-5 2325-919 2825-919 3625-919 x x 8092-919 8042-056 43<br />
44 116-08-5 2325-919 2825-919 3625-919 x x 8092-919 8042-056 44<br />
45 116-08-5 2325-919 2825-919 3625-919 x x 8092-919 8042-056 45<br />
46 116-08-5 2325-919 2825-919 3625-919 x x 8092-919 8042-056 46<br />
1) 2) V = regulierbarer Andruck durch Exzenterdorne G = regulierbarer Andruck durch verstellbaren Gusskasten<br />
H 28
Einsatzvorschläge der Profilhersteller (alphabetische Reihenfolge)<br />
Profilhersteller · Profilsysteme Ergänzende Angaben zum Verschlusstyp Schließbleche <strong>für</strong> Hauptschlösser<br />
Flügel Rahmen Stulpausführung<br />
Rollzapfenhöhe<br />
Dornmaß<br />
Achsmaß<br />
Fallen-Riegel-<br />
Fallen-Schließblech<br />
Schließblech<br />
E = Ausführung mit Lochung <strong>für</strong> E-Öffner<br />
01 Thyssen (Fortsetzung)<br />
01<br />
02 TS20-0120 L20-0157 F-16 8 25 13 – – 125-919 E 02<br />
03 Z20-0147 L30-0116 F-16 8 25 13 – – 125-919 E 03<br />
04 Z20-0147 L60-0166 F-16 8 25 13 – – 125-919 E 04<br />
05 H40-9090 L30-0116 F-16 8 45 13 25-919 E – – 05<br />
06 H30-9085 L30-0116 F-16 8 45 13 25-919 E – – 06<br />
07 HD40-1058 LD24-1061 F-16 8 45 13 25-919 E – – 07<br />
08 ZM200-1016 LM100-1010 F-16 8 25 13 – – 125-118 E 08<br />
09 ZM200-1016 LM200-1011 F-16 8 25 13 – – 125-118 E 09<br />
10 ZM300-1017 LM100-1010 F-16 8 25 13 – – 125-118 E 10<br />
11 ZM300-1017 LM200-1011 F-16 8 25 13 – – 125-118 E 11<br />
12 H4/13-9065 L3-0155 F-16 8 45 13 25-118 E – – 12<br />
13 H3/13-9055 L3-0155 F-16 8 45 13 25-118 E – – 13<br />
14 ZM3-0164 LM10-0108 F-16 8 25 9 – – 125-702 E 14<br />
15 ZM2-0167 LM10-0108 F-16 8 25 9 – – 125-702 E 15<br />
16 ZM2-0167 LM20-0110 F-16 8 25 9 – – 125-702 E 16<br />
17 ZM3-0164 LM20-0110 F-16 8 25 9 – – 125-702 E 17<br />
18 H5-9070 L3-0155 P-6-24 6 45 12 25-703 E – – 18<br />
19 SZ1-9042 H4-9060 F-16 8 45 9 25-506 E – – 19<br />
20 H40-9090 SZ10-9045 F-16 8 45 13,5 25-900 E – – 20<br />
21 H30-9085 SZ10-9045 F-16 8 45 13,5 25-900 E – – 21<br />
22 22<br />
23 Trocal 23<br />
24 920100/TF921 910100/TF911 F-16 8 25 9 – – 125-501-1 E 24<br />
25 920300/TF923 910100/TF911 F-16 8 35 9 25-501-1 E – – 25<br />
26 920700/TF927 910100/TF911 F-16 8 40 9 25-501-1 E – – 26<br />
27 920700/TF927 910700/TF917 F-16 8 45 9 25-501-1 E – – 27<br />
28 920300/TF923 910700/TF917 F-16 8 35 9 25-501-1 E – – 28<br />
29 926500/TF925* 910100/TF911 F-16 8 55 13 25-550 E – – 29<br />
30 926500/TF925* 910700/TF917 F-16 8 55 13 25-550 E – – 30<br />
31 926600* 910700/TF917 F-16 8 55 12,5 25-550 E – – 31<br />
32 TF925 TF952 F-16 8 55 13 25-550 E – – 32<br />
33 120200 110100 F-16 – 30 13 – – 125-997 E 33<br />
34 120200 111000 F-16 – 30 13 – – 125-120 E 34<br />
35 120400 110100 F-16 – 30 13 – – 125-997 E 35<br />
36 120400 111000 F-16 – 30 13 – – 125-120 E 36<br />
37 Innonova 70 37<br />
38 520100 510100 F-16 – 25 13 – – 120-591 E 38<br />
39 520600 510100 F-16 – 25 13 – – 120-591 E 39<br />
40 522100 510100 F-16 – 35 13 20-591 E – – 40<br />
41 522200 510100 F-16 – 35 13 20-591 E – – 41<br />
42 522300 510200 F-16 – 35 13 20-591 E – – 42<br />
43 522400 510200 F-16 – 55 13 20-591 E – – 43<br />
44 522500 510200 F-16 – 55 13 20-591 E – – 44<br />
45 45<br />
46 46<br />
* Hauptschlosskasten mit 17,5 mm Hinterdornmaß<br />
H 29
Einsatzvorschläge der Profilhersteller (alphabetische Reihenfolge)<br />
Austauschstücke<br />
Schließbleche <strong>für</strong> Zusatz-Verriegelungen Schließplatten<br />
V 1) G 2)<br />
verstellbare<br />
Ausführung<br />
Bandseitensicherungen<br />
01 01<br />
02 116-08-5 2325-919 2825-919 3625-919 x x 8092-919 8042-056 02<br />
03 116-08-5 2325-919 2825-919 3625-919 x x 8092-919 8042-056 03<br />
04 116-08-5 2325-919 2825-919 3625-919 x x 8092-919 8042-056 04<br />
05 116-08-5 2325-919 2825-919 3625-919 x x 8092-919 8042-056 05<br />
06 116-08-5 2325-919 2825-919 3625-919 x x 8092-919 8042-056 06<br />
07 116-08-5 2325-919 2825-919 3625-919 x x 8092-919 8042-056 07<br />
08 116-08-5 2325-118 2825-118 3625-118 x x 8092-919 8042-056 08<br />
09 116-08-5 2325-118 2825-118 3625-118 x x 8092-919 8042-056 09<br />
10 116-08-5 2325-118 2825-118 3625-118 x x 8092-919 8042-056 10<br />
11 116-08-5 2325-118 2825-118 3625-118 x x 8092-919 8042-056 11<br />
12 116-08-5 2325-118 2825-118 3625-118 x x 8092-919 8042-056 12<br />
13 116-08-5 2325-118 2825-118 3625-118 x x 8092-919 8042-056 13<br />
14 116-08 2325-702 2825-702 3625-702 x – 8092-620 8042-027 14<br />
15 116-08 2325-702 2825-702 3625-702 x – 8092-620 8042-027 15<br />
16 116-08 2325-702 2825-702 3625-702 x – 8092-620 8042-027 16<br />
17 116-08 2325-702 2825-702 3625-702 x – 8092-620 8042-027 17<br />
18 116-06-5 2325-703 2825-703 3625-703 x x 8050-01-24 – 18<br />
19 116-06 2325-506 2825-506 3625-506 x – 8092-611 – 19<br />
20 116-06-6 2325-900 2825-900 3625-900 x x 8092-615 – 20<br />
21 116-06-6 2325-900 2825-900 3625-900 x x 8092-615 – 21<br />
22 22<br />
23 23<br />
24 116-08 2325-501-1 2825-501-1 3625-501-1 x – 8092-601-1 8042-064 24<br />
25 116-08 2325-501-1 2825-501-1 3625-501-1 x – 8092-601-1 8042-064 25<br />
26 116-08 2325-501-1 2825-501-1 3625-501-1 x – 8092-601-1 8042-064 26<br />
27 116-08 2325-501-1 2825-501-1 3625-501-1 x – 8092-601-1 8042-064 27<br />
28 116-08 2325-501-1 2825-501-1 3625-501-1 x – 8092-601-1 8042-064 28<br />
29 116-08-5 2325-550 2825-550 3625-550 x x 8092-610 8042-063 29<br />
30 116-08-5 2325-550 2825-550 3625-550 x x 8092-610 8042-063 30<br />
31 116-08-5 2325-550 2825-550 3625-550 x x 8092-610 8042-063 31<br />
32 116-08-5 2325-550 2825-550 3625-550 x x 8092-610 8042-063 32<br />
33 116-08-5 2325-997 2825-997 3625-997 x x – – 33<br />
34 116-08-5 2325-120 2825-120 3625-120 – x – – 34<br />
35 116-08-5 2325-997 2825-997 3625-997 x x – – 35<br />
36 116-08-5 2325-120 2825-120 3625-120 – x – – 36<br />
37 37<br />
38 116-06-5 2325-591 2825-591 3625-591 – x – – 38<br />
39 116-06-5 2325-591 2825-591 3625-591 – x – – 39<br />
40 116-06-5 2325-591 2825-591 3625-591 – x – – 40<br />
41 116-06-5 2325-591 2825-591 3625-591 – x – – 41<br />
42 116-06-5 2325-591 2825-591 3625-591 – x – – 42<br />
43 116-06-5 2325-591 2825-591 3625-591 – x – – 43<br />
44 116-06-5 2325-591 2825-591 3625-591 – x – – 44<br />
45 45<br />
46 46<br />
1) 2) V = regulierbarer Andruck durch Exzenterdorne G = regulierbarer Andruck durch verstellbaren Gusskasten<br />
H 30
Einsatzvorschläge der Profilhersteller (alphabetische Reihenfolge)<br />
Profilhersteller · Profilsysteme Ergänzende Angaben zum Verschlusstyp Schließbleche <strong>für</strong> Hauptschlösser<br />
Flügel Rahmen Stulpausführung<br />
Rollzapfenhöhe<br />
Dornmaß<br />
Achsmaß<br />
Fallen-Riegel-<br />
Fallen-Schließblech<br />
Schließblech<br />
E = Ausführung mit Lochung <strong>für</strong> E-Öffner<br />
01 Veka<br />
01<br />
02 103.118 101.100 F-16 8 35 9 25-873 E – – 02<br />
03 103.118 101.099 F-16 8 35 9 25-873 E – – 03<br />
04 103.118 101.098 F-16 8 35 9 25-873 E – – 04<br />
05 103.118 111.018 F-16 8 35 9 25-873 E – – 05<br />
06 103.118 111.022 F-16 8 35 9 25-873 E – – 06<br />
07 103.118 111.027 F-16 8 35 9 25-873 E – – 07<br />
08 103.121 101.100 F-16 8 35 9 25-873 E – – 08<br />
09 103.121 101.099 F-16 8 35 9 25-873 E – – 09<br />
10 103.121 101.098 F-16 8 35 9 25-873 E – – 10<br />
11 103.121 111.018 F-16 8 35 9 25-873 E – – 11<br />
12 103.121 111.022 F-16 8 35 9 25-873 E – – 12<br />
13 103.121 111.027 F-16 8 35 9 25-873 E – – 13<br />
14 103.130 101.100 F-16 8 45 9 25-873 E – – 14<br />
15 103.130 101.099 F-16 8 45 9 25-873 E – – 15<br />
16 103.130 101.098 F-16 8 45 9 25-873 E – – 16<br />
17 103.130 111.018 F-16 8 45 9 25-873 E – – 17<br />
18 103.130 111.022 F-16 8 45 9 25-873 E – – 18<br />
19 103.130 111.027 F-16 8 45 9 25-873 E – – 19<br />
20 103.122 101.085 F-16 8 35 9 25-873 E – – 20<br />
21 103.122 101.086 F-16 8 35 9 25-873 E – – 21<br />
22 103.122 101.111 F-16 8 35 9 25-873 E – – 22<br />
23 103.122 101.094 F-16 8 35 9 25-873 E – – 23<br />
24 103.122 101.105 F-16 8 35 9 25-873 E – – 24<br />
25 103.122 101.118 F-16 8 35 9 25-873 E – – 25<br />
26 103.122 111.010 F-16 8 35 9 25-873 E – – 26<br />
27 103.125 101.085 F-16 8 35 9 25-873 E – – 27<br />
28 103.125 101.086 F-16 8 35 9 25-873 E – – 28<br />
29 103.125 101.111 F-16 8 35 9 25-873 E – – 29<br />
30 103.125 101.094 F-16 8 35 9 25-873 E – – 30<br />
31 103.125 101.105 F-16 8 35 9 25-873 E – – 31<br />
32 103.125 101.118 F-16 8 35 9 25-873 E – – 32<br />
33 103.125 111.010 F-16 8 35 9 25-873 E – – 33<br />
34 105.081/181 101.086 P-6-24 6 45 16 20-531 E – – 34<br />
35 P-6-24 6 45 16 25-112 E – – 35<br />
36 105.081/181 101.111 P-6-24 6 45 16 20-531 E – – 36<br />
37 P-6-24 6 45 16 25-112 E – – 37<br />
38 105.081/181 101.085 P-6-24 6 45 16 20-531 E – – 38<br />
39 P-6-24 6 45 16 25-112 E – – 39<br />
40 105.081/181 101.094 P-6-24 6 45 16 20-531 E – – 40<br />
41 P-6-24 6 45 16 25-112 E – – 41<br />
42 105.082 101.086 P-6-24 6 45 16 20-531 E – – 42<br />
43 P-6-24 6 45 16 25-112 E – – 43<br />
44 105.082 101.111 P-6-24 6 45 16 20-531 E – – 44<br />
45 P-6-24 6 45 16 25-112 E – – 45<br />
46 105.082 101.085 P-6-24 6 45 16 20-531 E – – 46<br />
H 31
Einsatzvorschläge der Profilhersteller (alphabetische Reihenfolge)<br />
Austauschstücke<br />
Schließbleche <strong>für</strong> Zusatz-Verriegelungen Schließplatten<br />
V 1) G 2)<br />
verstellbare<br />
Ausführung<br />
Bandseitensicherungen<br />
01 01<br />
02 116-06 2325-873 2825-873 3625-873 x – 8092-873 – 02<br />
03 116-06 2325-873 2825-873 3625-873 x – 8092-873 – 03<br />
04 116-06 2325-873 2825-873 3625-873 x – 8092-873 – 04<br />
05 116-06 2325-873 2825-873 3625-873 x – 8092-873 – 05<br />
06 116-06 2325-873 2825-873 3625-873 x – 8092-873 – 06<br />
07 116-06 2325-873 2825-873 3625-873 x – 8092-873 – 07<br />
08 116-06 2325-873 2825-873 3625-873 x – 8092-873 – 08<br />
09 116-06 2325-873 2825-873 3625-873 x – 8092-873 – 09<br />
10 116-06 2325-873 2825-873 3625-873 x – 8092-873 – 10<br />
11 116-06 2325-873 2825-873 3625-873 x – 8092-873 – 11<br />
12 116-06 2325-873 2825-873 3625-873 x – 8092-873 – 12<br />
13 116-06 2325-873 2825-873 3625-873 x – 8092-873 – 13<br />
14 116-06 2325-873 2825-873 3625-873 x – 8092-873 – 14<br />
15 116-06 2325-873 2825-873 3625-873 x – 8092-873 – 15<br />
16 116-06 2325-873 2825-873 3625-873 x – 8092-873 – 16<br />
17 116-06 2325-873 2825-873 3625-873 x – 8092-873 – 17<br />
18 116-06 2325-873 2825-873 3625-873 x – 8092-873 – 18<br />
19 116-06 2325-873 2825-873 3625-873 x – 8092-873 – 19<br />
20 116-06 2325-873 2825-873 3625-873 x – 8092-873 – 20<br />
21 116-06 2325-873 2825-873 3625-873 x – 8092-873 – 21<br />
22 116-06 2325-873 2825-873 3625-873 x – 8092-873 – 22<br />
23 116-06 2325-873 2825-873 3625-873 x – 8092-873 – 23<br />
24 116-06 2325-873 2825-873 3625-873 x – 8092-873 – 24<br />
25 116-06 2325-873 2825-873 3625-873 x – 8092-873 – 25<br />
26 116-06 2325-873 2825-873 3625-873 x – 8092-873 – 26<br />
27 116-06 2325-873 2825-873 3625-873 x – 8092-873 – 27<br />
28 116-06 2325-873 2825-873 3625-873 x – 8092-873 – 28<br />
29 116-06 2325-873 2825-873 3625-873 x – 8092-873 – 29<br />
30 116-06 2325-873 2825-873 3625-873 x – 8092-873 – 30<br />
31 116-06 2325-873 2825-873 3625-873 x – 8092-873 – 31<br />
32 116-06 2325-873 2825-873 3625-873 x – 8092-873 – 32<br />
33 116-06 2325-873 2825-873 3625-873 x – 8092-873 – 33<br />
34 115-18 2320-531 2820-531 3620-531 x x 8092-631 8042-045 34<br />
35 116-06-10 2325-112 2825-112 3625-112 x x 8092-631 8042-045 35<br />
36 115-18 2320-531 2820-531 3620-531 x x 8092-631 8042-045 36<br />
37 116-06-10 2325-112 2825-112 3625-112 x x 8092-631 8042-045 37<br />
38 115-18 2320-531 2820-531 3620-531 x x 8092-631 8042-045 38<br />
39 116-06-10 2325-112 2825-112 3625-112 x x 8092-631 8042-045 39<br />
40 115-18 2320-531 2820-531 3620-531 x x 8092-631 8042-045 40<br />
41 116-06-10 2325-112 2825-112 3625-112 x x 8092-631 8042-045 41<br />
42 115-18 2320-531 2820-531 3620-531 x x 8092-631 8042-045 42<br />
43 116-06-10 2325-112 2825-112 3625-112 x x 8092-631 8042-045 43<br />
44 115-18 2320-531 2820-531 3620-531 x x 8092-631 8042-045 44<br />
45 116-06-10 2325-112 2825-112 3625-112 x x 8092-631 8042-045 45<br />
46 115-18 2320-531 2820-531 3620-531 x x 8092-631 8042-045 46<br />
1) 2) V = regulierbarer Andruck durch Exzenterdorne G = regulierbarer Andruck durch verstellbaren Gusskasten<br />
H 32
Einsatzvorschläge der Profilhersteller (alphabetische Reihenfolge)<br />
Profilhersteller · Profilsysteme Ergänzende Angaben zum Verschlusstyp Schließbleche <strong>für</strong> Hauptschlösser<br />
Flügel Rahmen Stulpausführung<br />
Rollzapfenhöhe<br />
Dornmaß<br />
Achsmaß<br />
Fallen-Riegel-<br />
Fallen-Schließblech<br />
Schließblech<br />
E = Ausführung mit Lochung <strong>für</strong> E-Öffner<br />
01 Veka (Fortsetzung)<br />
01<br />
02 P-6-24 6 45 16 25-112 E – – 02<br />
03 105.082 101.094 P-6-24 6 45 16 20-531 E – – 03<br />
04 P-6-24 6 45 16 25-112 E – – 04<br />
05 105.081 102.086 P-6-24 6 45 16 20-531 E – – 05<br />
06 105.081 102.086 P-6-24 6 45 16 25-112 E – – 06<br />
07 105.081 102.118 P-6-24 – 45 16 8050-572 E – – 07<br />
08 103.202 (Topline) 101.200 F-16 – 35 13 25-146 E – – 08<br />
09 105.200 (Topline) 101.201 P-6-24 – 45 16 20-584 E – – 09<br />
10 Topline AD 10<br />
11 103.202 101.200 F-16 – 35 13 25-146 E – – 11<br />
12 103.202 101.201 F-16 – 35 13 25-146 E – – 12<br />
13 103.202 101.202 F-16 – 35 13 25-146 E – – 13<br />
14 103.202 101.204 F-16 – 35 13 25-146 E – – 14<br />
15 103.202 101.205 F-16 – 35 13 25-146 E – – 15<br />
16 103.203 101.200 F-16 – 35 13 25-146 E – – 16<br />
17 103.203 101.201 F-16 – 35 13 25-146 E – – 17<br />
18 103.203 101.202 F-16 – 35 13 25-146 E – – 18<br />
19 103.203 101.204 F-16 – 35 13 25-146 E – – 19<br />
20 103.203 101.205 F-16 – 35 13 25-146 E – – 20<br />
21 103.198 101.086 F-16 – 35 13 25-146 E – – 21<br />
22 103.198 101.085 F-16 – 35 13 25-146 E – – 22<br />
23 103.198 101.111 F-16 – 35 13 25-146 E – – 23<br />
24 103.198 101.094 F-16 – 35 13 25-146 E – – 24<br />
25 103.219 101.086 F-16 – 35 13 25-146 E – – 25<br />
26 103.219 101.085 F-16 – 35 13 25-146 E – – 26<br />
27 103.219 101.111 F-16 – 35 13 25-146 E – – 27<br />
28 103.219 101.094 F-16 – 35 13 25-146 E – – 28<br />
29 Topline MD 29<br />
30 103.222 101.220 F-16 – 50 13 25-146 E – – 30<br />
31 103.222 101.222 F-16 – 50 13 25-146 E – – 31<br />
32 103.222 101.223 F-16 – 50 13 25-146 E – – 32<br />
33 103.223 101.220 F-16 – 50 13 25-146 E – – 33<br />
34 103.223 101.222 F-16 – 50 13 25-146 E – – 34<br />
35 103.223 101.223 F-16 – 50 13 25-146 E – – 35<br />
36 105.201 101.200 F-16 – 50 13 25-146 E – – 36<br />
37 105.201 101.201 F-16 – 50 13 25-146 E – – 37<br />
38 105.201 101.202 F-16 – 50 13 25-146 E – – 38<br />
39 105.201 101.203 F-16 – 50 13 25-146 E – – 39<br />
40 105.210 101.200 F-16 – 50 13 25-146 E – – 40<br />
41 105.210 101.201 F-16 – 50 13 25-146 E – – 41<br />
42 105.210 101.202 F-16 – 50 13 25-146 E – – 42<br />
43 105.210 101.203 F-16 – 50 13 25-146 E – – 43<br />
44 44<br />
45 45<br />
46 46<br />
H 33
Einsatzvorschläge der Profilhersteller (alphabetische Reihenfolge)<br />
Austauschstücke<br />
Schließbleche <strong>für</strong> Zusatz-Verriegelungen Schließplatten<br />
V 1) G 2)<br />
verstellbare<br />
Ausführung<br />
Bandseitensicherungen<br />
01 01<br />
02 116-06-10 2325-112 2825-112 3625-112 x x 8092-631 8042-045 02<br />
03 115-18 2320-531 2820-531 3620-531 x x 8092-631 8042-045 03<br />
04 116-06-10 2325-112 2825-112 3625-112 x x 8092-631 8042-045 04<br />
05 115-18 2320-531 2820-531 3620-531 x x 8092-631 8042-045 05<br />
06 116-06-10 2325-112 2825-112 3625-112 x x 8092-631 8042-045 06<br />
07 115-15 2330-572 2830-572 3630-572 – x – – 07<br />
08 115-34 2325-146 2825-146 3625-146 x x – 8042-059 08<br />
09 115-34 2320-584 2820-584 3625-584 – x – 8042-045 09<br />
10 10<br />
11 115-34 2325-146 2825-146 3625-146 – x – 8042-059 11<br />
12 115-34 2325-146 2825-146 3625-146 – x – 8042-059 12<br />
13 115-34 2325-146 2825-146 3625-146 – x – 8042-059 13<br />
14 115-34 2325-146 2825-146 3625-146 – x – 8042-059 14<br />
15 115-34 2325-146 2825-146 3625-146 – x – 8042-059 15<br />
16 115-34 2325-146 2825-146 3625-146 – x – 8042-059 16<br />
17 115-34 2325-146 2825-146 3625-146 – x – 8042-059 17<br />
18 115-34 2325-146 2825-146 3625-146 – x – 8042-059 18<br />
19 115-34 2325-146 2825-146 3625-146 – x – 8042-059 19<br />
20 115-34 2325-146 2825-146 3625-146 – x – 8042-059 20<br />
21 115-34 2325-146 2825-146 3625-146 – x – 8042-059 21<br />
22 115-34 2325-146 2825-146 3625-146 – x – 8042-059 22<br />
23 115-34 2325-146 2825-146 3625-146 – x – 8042-059 23<br />
24 115-34 2325-146 2825-146 3625-146 – x – 8042-059 24<br />
25 115-34 2325-146 2825-146 3625-146 – x – 8042-059 25<br />
26 115-34 2325-146 2825-146 3625-146 – x – 8042-059 26<br />
27 115-34 2325-146 2825-146 3625-146 – x – 8042-059 27<br />
28 115-34 2325-146 2825-146 3625-146 – x – 8042-059 28<br />
29 29<br />
30 115-34 2325-146 2825-146 3625-146 – x – 8042-059 30<br />
31 115-34 2325-146 2825-146 3625-146 – x – 8042-059 31<br />
32 115-34 2325-146 2825-146 3625-146 – x – 8042-059 32<br />
33 115-34 2325-146 2825-146 3625-146 – x – 8042-059 33<br />
34 115-34 2325-146 2825-146 3625-146 – x – 8042-059 34<br />
35 115-34 2325-146 2825-146 3625-146 – x – 8042-059 35<br />
36 115-34 2325-146 2825-146 3625-146 – x – 8042-059 36<br />
37 115-34 2325-146 2825-146 3625-146 – x – 8042-059 37<br />
38 115-34 2325-146 2825-146 3625-146 – x – 8042-059 38<br />
39 115-34 2325-146 2825-146 3625-146 – x – 8042-059 39<br />
40 115-34 2325-146 2825-146 3625-146 – x – 8042-059 40<br />
40 115-34 2325-146 2825-146 3625-146 – x – 8042-059 41<br />
42 115-34 2325-146 2825-146 3625-146 – x – 8042-059 42<br />
43 115-34 2325-146 2825-146 3625-146 – x – 8042-059 43<br />
44 44<br />
45 45<br />
46 46<br />
1) 2) V = regulierbarer Andruck durch Exzenterdorne G = regulierbarer Andruck durch verstellbaren Gusskasten<br />
H 34
Einsatzvorschläge der Profilhersteller (alphabetische Reihenfolge)<br />
Profilhersteller · Profilsysteme Ergänzende Angaben zum Verschlusstyp Schließbleche <strong>für</strong> Hauptschlösser<br />
Flügel Rahmen Stulpausführung<br />
Rollzapfenhöhe<br />
Dornmaß<br />
Achsmaß<br />
Fallen-Riegel-<br />
Fallen-Schließblech<br />
Schließblech<br />
E = Ausführung mit Lochung <strong>für</strong> E-Öffner<br />
01 Wavin siehe LB-Profile<br />
01<br />
02 02<br />
03 Wymar 03<br />
04 107a 104 F-16 8 40 9 25-870 E – – 04<br />
05 2217 2003 F-16 8 45 12,5 25-867 E – – 05<br />
06 2207 2212 F-16 8 45 13,5 25-900 E – – 06<br />
07 07<br />
08 08<br />
09 09<br />
10 10<br />
11 11<br />
12 12<br />
13 13<br />
14 14<br />
15 15<br />
16 16<br />
17 17<br />
18 18<br />
19 19<br />
20 20<br />
21 21<br />
22 22<br />
23 23<br />
24 24<br />
25 25<br />
26 26<br />
27 27<br />
28 28<br />
29 29<br />
30 30<br />
31 31<br />
32 32<br />
33 33<br />
34 34<br />
35 35<br />
36 36<br />
37 37<br />
38 38<br />
39 39<br />
40 40<br />
41 41<br />
42 42<br />
43 43<br />
44 44<br />
45 45<br />
46 46<br />
H 35
Einsatzvorschläge der Profilhersteller (alphabetische Reihenfolge)<br />
Austauschstücke<br />
Schließbleche <strong>für</strong> Zusatz-Verriegelungen Schließplatten<br />
V 1) G 2)<br />
verstellbare<br />
Ausführung<br />
1) V = regulierbarer Andruck durch Exzenterdorne 2) G = regulierbarer Andruck durch verstellbaren Gusskasten<br />
Bandseitensicherungen<br />
01 01<br />
02 02<br />
03 03<br />
04 116-08 2325-870 2825-870 3625-870 x – 8092-608 – 04<br />
05 116-08-5 2325-867 2825-867 3625-867 x x 8092-867 – 05<br />
06 116-06-6 2325-900 2825-900 3625-900 x x 8092-615 – 06<br />
07 07<br />
08 08<br />
09 09<br />
10 10<br />
11 11<br />
12 12<br />
13 13<br />
14 14<br />
15 15<br />
16 16<br />
17 17<br />
18 18<br />
19 19<br />
20 20<br />
21 21<br />
22 22<br />
23 23<br />
24 24<br />
25 25<br />
26 26<br />
27 27<br />
28 28<br />
29 29<br />
30 30<br />
31 31<br />
32 32<br />
33 33<br />
34 34<br />
35 35<br />
36 36<br />
37 37<br />
38 38<br />
39 39<br />
40 40<br />
41 41<br />
42 42<br />
43 43<br />
44 44<br />
45 45<br />
46 46<br />
H 36
Kapitelübersicht<br />
I 2-4 Bohrlehre <strong>für</strong> Stahlzargen<br />
I 6-9 Rahmenfräslehre<br />
I 10 Rahmenfräslehre <strong>für</strong> Holztüren mit Euronut<br />
I 12-15 Flügelfräslehre<br />
I<br />
I1
Bohrlehre <strong>für</strong> Stahlzargen<br />
I2
Bohrlehre <strong>für</strong> Stahlzargen<br />
Zur Erstellung des Lochbildes <strong>für</strong> die Aufnahme der Rundbolzen<br />
von <strong>Mehrfachverriegelungen</strong> (z. B. AS 2372)<br />
Passend <strong>für</strong> alle gängigen Stahlzargen<br />
Rechts und links verwendbar<br />
Lieferung erfolgt komplett mit <strong>Zubehör</strong> in Montagebox<br />
Nr. 8023-100<br />
Bohrlehre <strong>für</strong> Stahlblechzarge<br />
3294100 Grundplatte komplett<br />
3294101 Anlaufbolzen<br />
3294110 Anschlagblech 5 mm<br />
3294111 Anschlagblech 2 mm<br />
3294112 Passschraube (Satz)<br />
3294120 Sterngriff M 6 x 10<br />
3294121 Andrückstift<br />
3294130 Saugteller komplett<br />
3294131 Druckplatte<br />
3294132 Lösefeder<br />
3294200 Anschlagplatte komplett<br />
3294210 Anschlagbolzen<br />
3294220 Führungsstange<br />
3294221 Druckfeder<br />
3294222 Sicherungsring<br />
3294230 Verlängerung komplett<br />
3294231 Sicherungsstange<br />
3294240 Sterngriff M 6 x 35<br />
3294300 Bohrhülse komplett<br />
3294321 Kreislochbohrer 16 mm Ø<br />
3294400 Tragekoffer<br />
3294410 Schaumstoffeinlage<br />
3294411 Einlegeklotz<br />
3294420 Dokumentation<br />
I3
Gebrauchsanleitung<br />
Achtung: Gefahrenhinweise!<br />
Die Kanten des entstehenden Langloches sind scharfkantig! Das Tragen einer Schutzbrille ist gemäß<br />
UVV notwendig! Saubere, schnittscharfe Bohrer einsetzen!<br />
1. Einstellung des Lochabstandes<br />
Die Klemmschraube (4) lösen und durch Verdrehen der Stellschraube (11) den gewünschten Lochabstand<br />
von der Zargenaußenkante einstellen.<br />
Ist kein Spalt zwischen Anschlagplatte (6) und Grundkörper (1) vorhanden, so beträgt der Lochabstand<br />
2 mm. Als Einstellhilfe befinden sich an den Führungsstangen (8) Markierungen im Abstand<br />
von 2,5 mm.<br />
Klemmschrauben (4) wieder festdrehen.<br />
2. Einstellen der Bohrtiefe<br />
Durch Hinzufügen oder Entfernen der Anschlagbleche (2) lassen sich Bohrtiefen <strong>für</strong> die Falzmaße<br />
13 mm, 15 mm und 20 mm einstellen. Ist der Grundkörper (1) mit allen drei Anschlagblechen<br />
versehen, so entspricht dies einer Falztiefe von 13 mm.<br />
VORGEHEN:<br />
Entfernen der Passschraube (3), Einsetzen der benötigten Anschlagbleche (2), Eindrehen der<br />
Passschrauben von Hand.<br />
Bohrhülse (12) in äußere Position einführen und die dazugehörige Passschraube festdrehen.<br />
Leichtgängigkeit der Bohrhülse in allen 3 Positionen prüfen!<br />
HINWEIS:<br />
Im Neuzustand ist eine gewisse Schwergängigkeit der Bohrhülse, die jedoch nach kurzem Gebrauch<br />
verschwindet, normal.<br />
Dies dient dem präzisen Einlaufen der Bohrhülse zur Führung.<br />
Achtung: Bohrtiefe des Kreislochbohrers nicht tiefer als die Materialstärke der Zarge (ca. 2 mm) einstellen,<br />
da Stahlzargen mit Beton hinterfüllt sind und dies bei Kontakt mit dem Bohrer zu frühzeitigem<br />
Verschleiß führt!<br />
3. Ansetzen der Bohrlehre<br />
Spannhebel und Saugteller (5) in senkrechte Stellung zum Grundkörper bringen.<br />
Bohrlehre an der Zargenfläche ansetzen und Anschlagbolzen (7) gegen die Zargenwange schieben.<br />
Spannhebel (5) in waagerechte Stellung bringen.<br />
Sicherungsstange (10) in Anschlagplatte einsetzen und Bohrlehre gegen eventuelles Lösen an gegenüberliegender<br />
Zargenwange sichern. Klemmschraube (14) festdrehen.<br />
(Bei großer Zargentiefe ggf. Verlängerung (9) verwenden).<br />
4. Bohren<br />
Zum Bohren muss eine drehzahlregulierbare Bohrmaschine verwendet werden. Die richtige Drehzahl<br />
liegt bei 530 U/min.<br />
Bohrer in beliebiger Reihenfolge in allen Stellungen einführen. Blechreste ggf. mit Schraubendreher<br />
oder ähnlichem Werkzeug entfernen.<br />
I4
Rahmenfräslehre<br />
I 6
Rahmenfräslehre <strong>für</strong> 1- und 2-flügelige Holztüren mit 4 und 11 mm Falzluft<br />
Die Lehre ermöglicht den präzisen und rationellen Anschlag von KFV-<strong>Zubehör</strong> <strong>für</strong> <strong>Mehrfachverriegelungen</strong> mit<br />
Rundbolzen, Zwillingsbolzen, Schwenkriegel und Bolzen-Schwenkriegelkombination in Standardausführung mit 92 mm<br />
Entfernung.<br />
– Stabile Ausführung mit Stangenführung und drei Aggregaten<br />
– Durch Austausch von Einlegerahmen in den Aggregaten Fräsungen <strong>für</strong> unterschiedliche Schließbleche<br />
möglich<br />
– Rechts und links verwendbar<br />
– Verstellbarer Höhenanschlag zum Fixieren der Drückerhöhe<br />
– Markierung am Mittelaggregat zur Festlegung des Drückerhöhenmaßes<br />
– Splitterschutz aus Kunststoff, um beim Fräsvorgang das Aussplittern des Holzes zu verhindern<br />
– Er<strong>for</strong>derliche Einsatzwerkzeuge:<br />
Handoberfräse mit 16 mm Fräser und 27 mm Anlaufring, Tauchtiefe mindestens 65 mm<br />
Artikel-Nr. 8023.200 Fräslehre <strong>für</strong> Schließblechlänge bis 180 mm<br />
Artikel-Nr. 8023.201 Fräslehre <strong>für</strong> Schließblechlänge von 181 mm bis 250 mm.<br />
Zum Lieferumfang gehören: Führungsgestänge, Anschlag, 3 Aggregate, 4 Zwingen<br />
und <strong>Zubehör</strong> (ohne Einlegerahmen)<br />
Einlegerahmen: Je nach Schließblech sind zwei oder drei Einlegerahmen je Aggregat er<strong>for</strong>derlich.<br />
Weitere Angaben entnehmen Sie bitte der Aufstellung Seite N 8.<br />
I 7
Gebrauchsanleitung<br />
1. Auspacken, Inbetriebnahme<br />
1.1 Spannzwingen (Nr. 4995-200)<br />
Alle Spannzwingen gemäß Abb. 1 in die Spannzwingenaufnahme<br />
(Nr. 4995-050) einsetzen.<br />
Dazu die Sterngriffe (Nr. 4995-053) zuvor vollkommen herausdrehen.<br />
Soll die Lehre am Blendrahmen <strong>für</strong> 1-flügelige Türen verwendet werden,<br />
genügt es die Spannzwingen in die Verschiebenut bis zum Anschlag zu<br />
bewegen. Danach die Sterngriffe fest zudrehen.<br />
Beim Auflegen der Lehre in den Falz des Blendrahmens müssen sich dann<br />
die Anlageflächen der grauen PVC-Klötze und die Anlageflächen der<br />
Zwingen in einer Ebene befinden.<br />
1.2 Drückerhöhenanschläge (Nr. 4995.020)<br />
Die Drückerhöhenanschläge in die Enden der Lehre stecken und gewünschten<br />
Höhenanschlag mittels Sterngriff leicht feststellen. (Abb. 2).<br />
1.3 PVC-Splitterschutz (Nr. 4995-040)<br />
Bei der Bearbeitung von Holz führt das Heraustreten des Fräsers aus dem<br />
Material zum Aussplittern der gefrästen Kante. Um dies zu verhindern, kann der Splitterschutz<br />
so eingestellt werden, dass dieser beim ersten Fräsvorgang leicht (ca. 1 bis 2 mm) abgefräst<br />
wird und damit eine exakte Begrenzung der Ausfräsung bildet.<br />
Achtung: Die Einstellung des Splitterschutzes hängt von der Größe der verwendeten Fräsrahmen<br />
bzw. Schließbleche ab und muss von Zeit zu Zeit nachgestellt werden.<br />
2. Bedienung<br />
2.1 Grundeinstellung<br />
Auf Grund der unterschiedlichen Abstände der Zusatzschlösser zum Hauptschloss und der<br />
Rechts-/Linksverwendbarkeit der Fräslehre ist ein Verschieben des mittleren Aggregates<br />
notwendig.<br />
Achtung: Falsche Einstellung der Lehre führt zum Verfräsen des Blendrahmens.<br />
Vorgehensweise:<br />
Mittleres Aggregat durch Anheben des Arretierknopfes lösen und auf dem Tragrohr axial so<br />
weit verschieben, bis der Kennbuchstabe der DIN-Richtung des Blendrahmens zum Vorschein kommt.<br />
Nach dem Verstellen auf das Einrasten des Arretierknopfes achten!<br />
Lehre in den Schlossfalz des Blendrahmens einlegen und den Höhenanschlag am unteren Ende<br />
des Blendrahmens anschlagen. Die Kerbmarkierung des mittleren Aggregates mit der zugehörigen<br />
Kennzeichnung (R/L) kennzeichnet die Lage der Drückermitte, und es muss sich nun auf dem<br />
gewünschten Abstandsmaß befinden (ggf. Einstellung des Höhenanschlages korrigieren!)<br />
Bei Fräsarbeiten am Blendrahmen einer zweiflügeligen Türe muss die Lage der Spannzwingen<br />
so eingestellt werden, dass die Fräslehre rechtwinkelig im Falz anliegt.<br />
Spannzwingen fest schließen.<br />
2.2 Fräsrahmen einlegen<br />
Fräsrahmen in die Lehre einlegen<br />
Bei unsymmetrischen Fräsrahmen (z. B. E-Öffner) auf die richtige Einlegerichtung achten.<br />
Ein Vertauschen zwischen seitlichen und oberen Fräsrahmen ist auf Grund der speziellen Formgebung<br />
nicht möglich.<br />
Abb. 1<br />
Abb. 2<br />
2.3 Fräsen. Achtung – Schutzbrille tragen!<br />
Handoberfräse mit Fräser 16 mm und Anlaufring 27 mm versehen. Die Handoberfräse sollte<br />
über ausreichenden Hub verfügen! Gewünschte Eintauchtiefen an den Anschlägen der Handoberfräse<br />
einstellen.<br />
Achtung: Handoberfräse nur im Stillstand aufsetzen!<br />
Oberfräse in den Fräsrahmen einsetzen und an den Konturen im Fräsrahmen entlangführen.<br />
Motor starten und auf die gewünschte Frästiefe eintauchen. Dabei mit mäßigem Druck an den<br />
Kanten des Einlegerahmens entlangfahren.<br />
I 8
Einlegerahmen <strong>für</strong>: Blendrahmenfläche Falzseite Lochbild<br />
Mittelschließbleche<br />
Nr. 15, 15-3-E 8024.15.B 8024.15.F 8024.15.L<br />
Nr. 15-503-E, 15-513-E 8024.15.503.B 8024.15.F 8024.15.503.L<br />
Nr. 15-504, 15-504-E 8024.15.504.B – 8024.15.504.L<br />
Nr. 17 K 8024.17.B 8024.17.F 8024.17.L<br />
Nr. 19, 19-503, 19-503-V 8024.19.504.B – 8024.19.503.L<br />
Nr. 19-08-18, 19-504, 19-504-V 8024.19.504.B – 8024.19.504.L<br />
Zusatzschließbleche:<br />
Nr. 2392-01-20 8024.2392.B – 8024.2392.L<br />
Nr. 2319-503-V 8024.39.504.B – 8024.39.503.L<br />
Nr. 2319-504-V 8024.39.504.B – 8024.39.504.L<br />
Nr. 2300-06-20-R + 2000-06-20-R individuell einstellbar 8024.2300.F 8024.2300.L<br />
Nr. 2315 8024.2315.B 8024.2315.F 8024.2315.L<br />
Nr. 2315-503 8024.35.503.B – 8024.35.503.L<br />
Nr. 2315-504 8024.35.504.B – 8024.35.504.L<br />
Nr. 2317 8024.2317.B 8024.2317.F 8024.2315.L<br />
Nr. 2317-503 8024.37.503.B – 8024.2315.L<br />
Nr. 2492-01-20 8024-2492.B – 8024.2492.L<br />
Nr. 2415 8024.2415.B 8024.2415.F 8024.2415.L<br />
Nr. 2417 8024.2417.B 8024.2417.F 8024.2415.L<br />
Nr. 2400-06-20-R individuell einstellbar 8024.2400.F 8024.2400.L<br />
Nr. 2892-01-20 8024.2892.B – 8024-2892.L<br />
Nr. 2815 8024.2315.B 8024.2315.F 8024.2815.L<br />
Nr. 2817 8024.2317.B 8024.2317.F 8024.2815.L<br />
Nr. 3600-08-20-R individuell einstellbar 8024.3600.F 8024.3600.L<br />
Nr. 3692-01-20 8024.3692.B – 8024.3692.L<br />
Nr. 3615 8024.3615.B 8024.3615.F 8024.3615.L<br />
Nr. 3617 8024.3617.B 8024.3617.F 8024.3615.L<br />
Spezial-Mittelschließbleche <strong>für</strong> Futtertüren*<br />
Nr. 17-541 bis 17-547 8024.17.54.B – –<br />
Nr. 17-562 bis 17-567 8024.17.56.B – 8024.17.56.L<br />
Spezial-Zusatzschließbleche <strong>für</strong> Futtertüren*<br />
Nr. 2317-541 bis 2317-547 8024.2317.54.B – –<br />
Nr. 2317-562 bis 2317-567 8024.2317.56.B – 8024.2317.56.L<br />
Bandseitensicherung:<br />
Nr. 8041/8042 individuell einstellbar 8024.2300.F 8024.8042.L<br />
Winkelschließblech <strong>für</strong> Zimmertür:<br />
Nr. 4-2, 4-3 und 4-F 8024.4.B – 8024.4.L<br />
(nur wenn 2-Tour benötigt wird)<br />
Winkelschließblech <strong>für</strong> Haustür<br />
Nr. 6 8024.6.B 8024.6.F 8024.6.L<br />
*falls er<strong>for</strong>derlich, sind längere Klemmzwingen gegen Aufpreis lieferbar<br />
I 9
Rahmenfräslehre <strong>für</strong> Holztüren mit Euronut 7/8 x 4, 11 mm Falznut<br />
Nr. 8023.504<br />
Lehre zum Ausfräsen der Schließbleche<br />
Nr. 15.504 und 15.504-E.<br />
Mit Schraubzwingen wird die Lehre <strong>for</strong>mschlüssig<br />
auf den Blendrahmen aufgespannt.<br />
Zum Lieferumfang gehören je ein Einlegerahmen<br />
zum Ausfräsen der äußeren Konturen, der E-Öffnerund<br />
Riegellochung.<br />
Wichtiger Hinweis:<br />
Damit beim Fräsen ein Ausreißen des Holzes<br />
verhindert wird, werden sämtliche Kunststoffanschläge<br />
der Aggregate beim ersten Fräsvorgang<br />
ca. 1 mm abgefräst.<br />
I 10
Flügelfräslehre<br />
I 12
Flügelfräslehre<br />
Die Lehre ermöglicht, speziell bei Kunststofftüren, die Schlosstaschenausfräsung am Flügel <strong>für</strong> Standard-<br />
<strong>Mehrfachverriegelungen</strong> sowie die Fräsung des Lochbildes (Drücker- und Zylinderloch).<br />
– Fräsung von Schlosstaschen <strong>für</strong> Haupt- und Zusatzschlösser der KFV-<strong>Mehrfachverriegelungen</strong><br />
– Einbringen von Drücker- und Profilzylinderloch<br />
– Stufenlose Einstellung der Türstärke von 40 mm bis 120 mm<br />
– Dornmaß von 25 mm bis 100 mm einstellbar<br />
– Rechts und links verwendbar<br />
– Verstellbarer Höhenanschlag zum Fixieren der Drückerhöhe<br />
– Die Klemmeinheiten sind mit Gummiblöcken bestückt, um eine Beschädigung der Türoberfläche zu<br />
verhindern<br />
– Er<strong>for</strong>derliche Einsatzwerkzeuge: Handoberfräse mit 16 mm Fräser und 27 mm Anlaufring<br />
– Einsatz bei Holz- und Alutüren ist unter Berücksichtigung der Fräserart und -länge sowie der Schnittgeschwindigkeit<br />
und der Tauchtiefe möglich<br />
Artikel-Nr. 8023.30 <strong>für</strong> <strong>Mehrfachverriegelungen</strong> AS 2000, AS 2300, AS 2500, AS 4250, AS 4350,<br />
AS 4500, AS 4900<br />
Artikel-Nr. 8023.40 <strong>für</strong> <strong>Mehrfachverriegelungen</strong> AS 2400, AS 2600, AS 4600<br />
Bei Bestellung muss die Entfernung (72 mm, 85 mm, 88 mm oder 92 mm) und die Stulpausführung (z. B.<br />
F 16, F 20 oder P 6/24) der zum Einsatz kommenden Mehrfachverriegelung angegeben werden.<br />
Lieferumfang:<br />
1 Stück vormontierte Lehre Nr. 8023.30 oder Nr. 8023.40<br />
2 Stück Zylinder-/Drücker-Bohrschiene links/rechts Nr. 5495092.... mit Verschiebeblockset Nr. 5495093<br />
4 Stück Schrauben DIN 912 mit Innensechskant 4 mm und Scheibe<br />
1 Stück Drückerhöhen-Anschlagset Nr. 5495030 mit Schrauben<br />
1 Satz Stulpstücke zur Positionierung der Lehre<br />
1 Stück Explosionszeichnung mit Ersatzteilliste.<br />
I 13
Gebrauchsanleitung<br />
1. Auspacken/Inbetriebnahme<br />
Alle Stulpadapter gemäß Abb. 1 von oben mit dem mitgelieferten Innen-<br />
Sechskantschlüssel lockern. Die mitgelieferten Stulpstücke müssen die gleiche<br />
Dimension wie die Stulpen Ihrer Mehrfachverriegelung aufweisen. Der gesamte<br />
Satz Stulpstücke von unten mit den beigepackten Senkkopfschrauben an<br />
den Stulpadaptern befestigen.<br />
Achtung: Die beiden langen Stulpstücke weisen einen Längenunterschied<br />
von nur 8 mm auf. Auf richtige Plazierung unbedingt achten!<br />
Sämtliche Klemmschrauben mit Kunststoffgriff <strong>für</strong> die Spannbacken müssen<br />
um 1 ⁄4 Drehung nach links gelöst werden. Siehe Abb 2. Fräslehre mit den<br />
Stulpstücken in die Stulpnut der Tür setzen. Durch Drehen der Griffe, (siehe<br />
Abb. 3) die Fräslehre am Türflügel festspannen.<br />
Klemmschrauben mit Kunststoffgriff (siehe Abb. 2) wieder leicht anziehen.<br />
Achtung: Ein zu festes Anziehen der Klemmschraube mit Kunststoffgriff verursacht<br />
nur vorzeitigen Verschleiß, ohne die Spannkraft zu erhöhen.<br />
Mit dem Drücker-Höhenanschlag (siehe Abb. 4) die gewünschte<br />
Drückerhöhe<br />
einstellen. Die kurzen Stulpstücke werden jeweils am äußeren Ende der Fräslehre<br />
mit 2 beigepackten Senkkopfschrauben befestigt. Sämtliche Stulpadapter<br />
mit dem Innensechskant festziehen.<br />
Achtung: Um eine einwandfreie Funktion der Fräslehre zu gewährleisten,<br />
ist<br />
auf exakte Ausrichtung und Auflage der Stulpstücke in der Stulpnut der Tür<br />
zu achten.<br />
Verschiebeblock wie Abb. 5 auf die Zylinder-/Drücker-Bohrschiene setzen.<br />
(ZD)-Bohrschiene <strong>für</strong> das gewünschte Dornmaß montieren (Abb. 6).<br />
2. Bedienung<br />
Den Verschiebeblock an der Zylinder-/Drücker-Bohrschiene auf die Drücker-<br />
Rasterstellung bringen. Das Maß von Mitte Verschiebeblock bis Anfang<br />
Drücker-Höhenanschlag muss nun die gewünschte Drückerhöhe ergeben. Der<br />
Drücker-Höhenanschlag wird immer von unten an dem Türflügel positioniert.<br />
Durch Drehen der Griffe die rechte und linke Spannbacke mit leichtem Druck<br />
an den Türflügel heranfahren.<br />
Die Lehre stellt sich automatisch auf ihre Stulplage ein. Auf die DIN-Richtung<br />
des Flügels muss keine Rücksicht genommen werden.<br />
Zum sicheren Halt ist die Klemmschraube mit Kunststoffgriff gemäß Abb.<br />
3.leicht zu drehen.<br />
Drücker- und PZ-Lochung bohren. Achtung - Schutzbrille tragen!<br />
Der Lieferumfang dieser Fräslehre beinhaltet 1 Kreislochbohrer komplett und<br />
eine Ersatz-Lochsäge.<br />
Je nach verarbeitetem Material empfehlen wir folgende<br />
Maschinendrehzahlen:<br />
Kunststoff oder Holz = 380 U/min.<br />
Abb. 3<br />
Abb. 1<br />
Abb. 2<br />
Abb. 4<br />
Abb. 6<br />
Abb. 5<br />
Abb. 6<br />
Mit dem Kreisbohrer durch jede der 3 möglichen Stellungen der Verschiebeblöcke in das Flügel-<br />
Profil eintauchen. Tip: etwas Wasser als Kühlmedium auf den Bohrer gesprüht, erhöht bei<br />
Aluminium-Profilen und stahlarmierten Kunststoff-Profilen wesentlich dessen Standzeit.<br />
Schlosstasche fräsen<br />
Handoberfräse mit 16 mm Fräser und 27 mm Anlaufring versehen. Die Handoberfräse sollte über<br />
ausreichenden Hub verfügen.<br />
Achtung: Handoberfräse nur im Stillstand aufsetzen.<br />
Oberfräse in den Fräsrahmen einsetzen. Motor starten und auf die gewünschte Frästiefe eintauchen.<br />
Hand-Oberfräse gegen die Laufrichtung des Fräsers führen. Sämtliche Schlosstaschen exakt<br />
von Anfang bis Ende der Führungsnut fräsen.<br />
I 14
5495 Kennzeichnung Lehre<br />
5495010 Mittelaggregat komplett<br />
5495002 Mittelaggregat<br />
5495003 Zylinderschraube M 6 x 20 2 Stück<br />
5495004 Zylinderschraube M 6 x 16 2 Stück<br />
5495005 Stulpadapter normal 2 Stück<br />
5495007 Senkschraube M 5 x 10<br />
5495020 Außenaggregat komplett<br />
5495021 Außenaggregat<br />
5495003 Zylinderschraube M 6 x 20 2 Stück<br />
5495004 Zylinderschraube M 6 x 16 2 Stück<br />
5495005 Stulpadapter normal 2 Stück<br />
5495007 Senkschraube M 5 x 10 4 Stück<br />
5495120 Außenaggregat komplett <strong>für</strong> Anschlag<br />
5495021 Außenaggregat<br />
5495003 Zylinderschraube M 6 x 20 4 Stück<br />
5495004 Zylinderschraube M 6 x 16 2 Stück<br />
5495005 Stulpadapter normal<br />
5495006 Stulpadapter spezial<br />
5495007 Senkschraube M 5 x 10 4 Stück<br />
5495030 Drückerhöhenanschlag komplett<br />
5495031 Anschlag Alu<br />
5495032 Sterngriff M 6 x 15<br />
5495033 Welle Anschlag<br />
5495034 Mutter M 8<br />
5495035 Welle Anschlag komplett<br />
5495033 Welle Anschlag<br />
5495034 Mutter M 8<br />
5495040 Holzgriff komplett<br />
5495041 Holzgriff<br />
5495042 Senkschraube M 5 x 35 2 Stück<br />
5495043 Mutter M 5 2 Stück<br />
5495050 Spannteil komplett<br />
5495051 Spannbacke 2 Stück<br />
5495052 Deckel Spannbacke 2 Stück<br />
5495053 Zahnrad 2 Stück<br />
5495054 Zahnstange 2 Stück<br />
5495055 Klemm-Gummi 2 Stück<br />
5495056 Klemmhebel 2 Stück<br />
5495057 Senkschraube M 5 x 12 10 Stück<br />
5495058 Zylinderstift 4 x 10 2 Stück<br />
5495059 Gewindestift M 4 x 5 2 Stück<br />
5495055 Klemm-Gummi<br />
5495056 Klemm-Hebel<br />
5495060 Mitläufer komplett<br />
5495061 Mitläufer PVC<br />
5495062 Welle Mitläufer<br />
5495003 Zylinderschraube M 6 x 20 2 Stück<br />
5495070 Stulpauflagenschienen komplett<br />
5495071 Stulpauflage 434 mm<br />
5495072 Stulpauflage 426 mm<br />
5495073 Stulpauflage 35 mm, 2 Stück<br />
5495007 Senkschraube M 5 x 10 12 Stück<br />
5495080 Tragrohr<br />
5495090 Führung Kreislochbohrer komplett<br />
5495091 Steg 2 Stück<br />
5495092.72 Zylinder-/Drücker-Bohrschiene<br />
<strong>für</strong> Verriegelungen mit 72 mm Entfernung<br />
oder 5495092.85 wie vor, <strong>für</strong> 85 mm Entfernung<br />
oder 5495092.88 wie vor, <strong>für</strong> 88 mm Entfernung<br />
oder 5495092.92 wie vor, <strong>für</strong> 92 mm Entfernung<br />
5495093 Verschiebeblock<br />
5495094 Kugellager<br />
5495095 Aufnahmebolzen<br />
5495096 Bolzen<br />
5495097 Spiralfeder<br />
5495098 Kugelkopf M 5<br />
5495003 Zylinderschraube M 6 x 20 2 Stück<br />
5495100 Kreislochbohrer komplett<br />
5495101 Lochsäge<br />
5495102 Aufnahme<br />
5495103 Bohrer<br />
I 15
Allgemeine In<strong>for</strong>mationen<br />
General in<strong>for</strong>mations<br />
In<strong>for</strong>mations générales<br />
J 1-14<br />
Artikelverzeichnis in numerischer Reihenfolge<br />
Article Directory in Numerical Order<br />
Articles par ordre numérique<br />
J
Allgemeine In<strong>for</strong>mationen<br />
General in<strong>for</strong>mations<br />
In<strong>for</strong>mations générales<br />
Artikelverzeichnis in numerischer Reihenfolge<br />
Article Directory in Numerical Order<br />
Articles par ordre numérique<br />
Nr. Seite Nr. Seite Nr. Seite<br />
9 C 6<br />
9 E C 6<br />
14 A1<br />
14-1 A 1<br />
15 E A 1<br />
15 A 1<br />
15-3 E A 1<br />
15 T A 3<br />
15-502 A 1<br />
15-502 E A 1<br />
15-503 E A 1<br />
15-503 T A 3<br />
15-504 B 2<br />
15-504 E B 2<br />
15-504 T B 3<br />
15-504--4 E B 2<br />
15-504--5 E B 2<br />
15-507 A 1<br />
15-507 E A 1<br />
15-507 T A 3<br />
15-508 A 1<br />
15-508 E A 1<br />
15-510 A 1<br />
15-510 E A 1<br />
15-511 A 1<br />
15-511 E A 1<br />
15-513 E A 1<br />
15-513 T A 3<br />
15-519 E A 2<br />
15-528 E A 2<br />
15-528 ET A 2<br />
15-530 E C 10<br />
15-530 T C 10<br />
15-531 E C 10<br />
15-531 T C 10<br />
16 A7<br />
17 A2<br />
17 N A 2<br />
17 K A 2<br />
17 KN A 2<br />
17-501 A 2<br />
17-541 C 1<br />
17-542 C 1<br />
17-542 T C 1<br />
17-543 C 1<br />
17-543 T C 1<br />
17-544 C 1<br />
17-544 T C 1<br />
17-545 C 1<br />
17-545 T C 1<br />
17-546 C 1<br />
17-546 T C 1<br />
17-547 C 1<br />
17-562 C 1<br />
17-562 T C 1<br />
17-563 C 1<br />
17-563 T C 1<br />
17-564 C 1<br />
17-565 C 1<br />
17-565 T C 1<br />
17-566 C 1<br />
17-567 C 1<br />
17-567 T C 1<br />
17-580-1 E C 8<br />
17-580-1 T C 8<br />
19 A 2<br />
19-08-18 A 8<br />
19-212 V B 12<br />
19-503 A 2<br />
19-503 V A 2<br />
19-504 A 8<br />
19-504 V A 8<br />
19-512 V B 8<br />
20-502 D 2<br />
20-502 E D 2<br />
20-502-1 D 2<br />
20-502-1 E D 2<br />
20-502-4 D 2<br />
20-502-4 E D 2<br />
20-502-6 D 2<br />
20-502-6 E D 2<br />
20-520 D 2<br />
20-520 E D 2<br />
20-531 D 2<br />
20-531 E D 2<br />
20-531-1 D 2<br />
20-531-1 E D 2<br />
20-531-2 D 2<br />
20-531-2 E D 2<br />
20-531-4 D 2<br />
20-531-4 E D 2<br />
20-563 D 2<br />
20-563 E D 2<br />
20-570 D 2<br />
20-570 E D 2<br />
20-591 D 2<br />
20-591 E D 2<br />
25-06-18 D 3<br />
25-06-20 D 3<br />
25-06-22 D 3<br />
25-06-22 E D 3<br />
25-06-24 D 3<br />
25-06-24 E D 3<br />
25-06-26 D 4<br />
25-06-26 E D 4<br />
25-06-28 D 4<br />
25-06-28 E D 4<br />
25-06-30 D 4<br />
25-06-30 E D 4<br />
25-08-18 D 3<br />
25-08-20 B 12, E 3<br />
25-08-22 D 3<br />
25-08-22 E D 3<br />
25-08-24 D 3<br />
25-08-24 E D 3<br />
25-08-26 D 4<br />
25-08-26 E D 4<br />
25-08-28 D 4<br />
25-08-28 E D 4<br />
25-08-30 D 4<br />
25-08-30 E D 4<br />
25-10-20 D 3<br />
25-10-22 D 3<br />
25-10-22 E D 3<br />
25-10-24 D 3<br />
25-10-24 E D 3<br />
25-10-24-1 D 3<br />
25-10-24-1 E D 3<br />
25-10-26 D 4<br />
J 1
Allgemeine In<strong>for</strong>mationen<br />
General in<strong>for</strong>mations<br />
In<strong>for</strong>mations générales<br />
Nr. Seite Nr. Seite Nr. Seite<br />
25-10-26 E D 4<br />
25-10-28 D 4<br />
25-10-28 E D 4<br />
25-10-30 D 4<br />
25-10-30 E D 4<br />
25-12-20 D 3<br />
25-12-24 D 4<br />
25-12-24 E D 4<br />
25-20-2 G 7<br />
25-20-3 G 7<br />
25-21 G 7<br />
25-22-2 G 7<br />
25-22-3 G 7<br />
25-27-2 G 7<br />
25-27-3 G 7<br />
25-30-2 G 7<br />
25-30-3 G 7<br />
25-112 D 5<br />
25-112 E D 5<br />
25-113 D 5<br />
25-114 D 5<br />
25-114 E D 5<br />
25-116 D 5<br />
25-116 E D 5<br />
25-117 D 5<br />
25-117 E D 5<br />
25-118 D 5<br />
25-118 E D 5<br />
25-120 D 5<br />
25-120 E D 5<br />
25-121 D 5<br />
25-121 E D 5<br />
25-122 D 5<br />
25-122 E D 5<br />
25-124 D 5<br />
25-124 E D 5<br />
25-126 D 5<br />
25-126 E D 5<br />
25-146 D 6<br />
25-146 E D 6<br />
25-153 D 6<br />
25-153 E D 6<br />
25-153-1 D 6<br />
25-153-1 E D 6<br />
25-212 E B 12<br />
25-212 V B 12<br />
25-501 D 6<br />
25-501 E D 6<br />
25-501-1 D 6<br />
25-501-1 E D 6<br />
25-503 B 2<br />
25-504 B 2<br />
25-504 E B 2<br />
25-504 T B 3<br />
25-504-3 E B 2<br />
25-504-5 E B 2<br />
25-504-6 D 6<br />
25-504-6 E D 6<br />
25-504-7 E B 2<br />
25-504-8 E B 2<br />
25-505 B 1, D 6<br />
25-505 E B 1, D 6<br />
25-505-2 E B 1<br />
25-506 D 6<br />
25-506 E D 6<br />
25-507 D 6<br />
25-507 E D 6<br />
25-507-01 D 6<br />
25-507-01 E D 6<br />
25-508 D 6<br />
25-508 E D 6<br />
25-509 D 6<br />
25-509 E D 6<br />
25-511 D 7<br />
25-511 E D 7<br />
25-512 B 8, D 7<br />
25-512 E B 8<br />
25-512 V B 8<br />
25-512-1 B 8<br />
25-512-1 E B 8<br />
25-512-5 E B 8<br />
25-518 D 7<br />
25-518 E D 7<br />
25-519 D 7<br />
25-519 E D 7<br />
25-519-3 D 7<br />
25-519-3 E D 7<br />
25-520 D 7<br />
25-520 E D 7<br />
25-520-2 D 7<br />
25-520-2 E D 7<br />
25-520-6 D 7<br />
25-520-9 D 7<br />
25-520-9 E D 7<br />
25-522 D 7<br />
25-522 E D 7<br />
25-523 D 7<br />
25-523 E D 7<br />
25-524 D 7<br />
25-525 D 7<br />
25-525 E D 7<br />
25-526 D 8<br />
25-526 E D 8<br />
25-528 D 8<br />
25-528 E D 8<br />
25-531 D 8<br />
25-531 E D 8<br />
25-532 D 8<br />
25-532 E D 8<br />
25-533 D 8<br />
25-535 D 8<br />
25-535 E D 8<br />
25-536 D 8<br />
25-536 E D 8<br />
25-542 D 8<br />
25-542 E D 8<br />
25-547 D 8<br />
25-547 E D 8<br />
25-549 D 8<br />
25-549 E D 8<br />
25-550 D 8<br />
25-550 E D 8<br />
25-550-3 D 8<br />
25-550-3 E D 8<br />
25-555 D 9<br />
25-555 E D 9<br />
25-557-01 D 9<br />
25-557-01 E D 9<br />
25-558 D 9<br />
25-558 E D 9<br />
25-559 D 9<br />
25-559 E D 9<br />
25-560 D 9<br />
25-560 E D 9<br />
25-563 D 9<br />
25-563 E D 9<br />
25-569 D 9<br />
25-569 E D 9<br />
J 2
Allgemeine In<strong>for</strong>mationen<br />
General in<strong>for</strong>mations<br />
In<strong>for</strong>mations générales<br />
Nr. Seite Nr. Seite Nr. Seite<br />
25-569-2 D 9<br />
25-569-2 E D 9<br />
25-569-3 D 9<br />
25-569-3 E D 9<br />
25-573 D 9<br />
25-573 E D 9<br />
25-575 D 9<br />
25-575 E D 9<br />
25-582 D 10<br />
25-582 E D 10<br />
25-585 D 10<br />
25-585 E D 10<br />
25-587 D 10<br />
25-587 E D 10<br />
25-588 D 10<br />
25-588 E D 10<br />
25-588-2 D 10<br />
25-588-2 E D 10<br />
25-589 D 10<br />
25-589 E D 10<br />
25-590 D 10<br />
25-590 E D 10<br />
25-592 D 10<br />
25-592 E D 10<br />
25-594 D 10<br />
25-594 E D 10<br />
25-597 D 10<br />
25-597 E D 10<br />
25-702 D 10<br />
25-702 E D 10<br />
25-703 D 10<br />
25-703 E D 10<br />
25-706 D 11<br />
25-706 E D 11<br />
25-707 D 11<br />
25-707 E D 11<br />
25-708 D 11<br />
25-708 E D 11<br />
25-709 D 11<br />
25-709 E D 11<br />
25-713 D 11<br />
25-713 E D 11<br />
25-717 D 11<br />
25-717 E D 11<br />
25-718 D 11<br />
25-718 E D 11<br />
25-721 D 11<br />
25-721 E D 11<br />
25-722 D 11<br />
25-722 E D 11<br />
25-725 D 11<br />
25-725 E D 11<br />
25-731-1 D 11<br />
25-731-1 E D 11<br />
25-733 D 11<br />
25-733 E D 11<br />
25-733-2 D 12<br />
25-733-2 E D 12<br />
25-735 D 12<br />
25-735 E D 12<br />
25-736 D 12<br />
25-736 E D 12<br />
25-744 D 12<br />
25-744 E D 12<br />
25-755 D 12<br />
25-755 E D 12<br />
25-757 D 12<br />
25-757 E D 12<br />
25-758 D 12<br />
25-758 E D 12<br />
25-762 D 12<br />
25-762 E D 12<br />
25-763 D 12<br />
25-763 E D 12<br />
25-764 D 12<br />
25-764 E D 12<br />
25-767 D 12<br />
25-767 E D 12<br />
25-767-2 D 13<br />
25-767-2 E D 13<br />
25-767-3 D 13<br />
25-767-3 E D 13<br />
25-788 D 13<br />
25-788 E D 13<br />
25-788-1 D 13<br />
25-788-1 E D 13<br />
25-799 D 13<br />
25-799 E D 13<br />
25-801 D 13<br />
25-801 E D 13<br />
25-802 D 13<br />
25-802 E D 13<br />
25-818 D 13<br />
25-818 E D 13<br />
25-818-3 D 13<br />
25-818-3 E D 13<br />
25-818-5 D 13<br />
25-818-5 E D 13<br />
25-821 D 13<br />
25-821 E D 13<br />
25-847 D 13<br />
25-847 E D 13<br />
25-852 D 13<br />
25-852 E D 13<br />
25-853 D 14<br />
25-853 E D 14<br />
25-857 D 14<br />
25-857 E D 14<br />
25-862 D 14<br />
25-862 E D 14<br />
25-867 D 14<br />
25-867 E D 14<br />
25-870 D 14<br />
25-870 E D 14<br />
25-873 D 14<br />
25-873 E D 14<br />
25-881 D14<br />
25-881 E D 14<br />
25-883 D 14<br />
25-883 E D 14<br />
25-886 D 14<br />
25-886 E D 14<br />
25-891 D 14<br />
25-891 E D 14<br />
25-898 D 14<br />
25-898 E D 14<br />
25-900 D 15<br />
25-900 E D 15<br />
25-906 D 15<br />
25-906 E D 15<br />
25-907 D 15<br />
25-907 E D 15<br />
25-910 D 15<br />
25-910 E D 15<br />
25-912 D 15<br />
25-912 E D 15<br />
25-915 D 15<br />
25-915 E D 15<br />
J 3
Allgemeine In<strong>for</strong>mationen<br />
General in<strong>for</strong>mations<br />
In<strong>for</strong>mations générales<br />
Nr. Seite Nr. Seite Nr. Seite<br />
25-915-1 D 15<br />
25-915-1 E D 15<br />
25-916 D 15<br />
25-916 E D 15<br />
25-919 D 15<br />
25-919 E D 15<br />
25-919-01 D 15<br />
25-919-01 E D 15<br />
25-919-2 D 15<br />
25-919-2 E D 15<br />
25-926 D 16<br />
25-926 E D 16<br />
25-927 D 16<br />
25-927 E D 16<br />
25-939 D 16<br />
25-939 E D 16<br />
25-940 D 16<br />
25-940 E D 16<br />
25-941 D 16<br />
25-941 E D 16<br />
25-945 D 16<br />
25-945 E D 16<br />
25-947 D 16<br />
25-947 E D 16<br />
25-948 D 16<br />
25-948 E D 16<br />
25-954 D 16<br />
25-954 E D 16<br />
25-958 D 16<br />
25-958 E D 16<br />
25-963 D 16<br />
25-963 E D 16<br />
25-964 D 16<br />
25-964 E D 16<br />
25-966 D 17<br />
25-966 E D 17<br />
25-967 D 17<br />
25-967 E D 17<br />
25-968 D 17<br />
25-968 E D 17<br />
25-971 D 17<br />
25-971 E D 17<br />
25-971-1 D 17<br />
25-971-1 E D 17<br />
25-978 D 17<br />
25-978 E D 17<br />
25-978-1 E D 17<br />
25-983 D 17<br />
25-983 E D 17<br />
25-985 D 17<br />
25-985 E D 17<br />
25-987 D 17<br />
25-987 E D 17<br />
25-990 D 17<br />
25-991 D 17<br />
25-991 E D 17<br />
25-997 D 17<br />
25-997 E D 17<br />
25-999 D 17<br />
25-999 E D 17<br />
115 G1<br />
115 M G 1<br />
115-1 G 1<br />
115-4 G 1<br />
115-5 G 1<br />
115-5-1 G 1<br />
115-5-2 G 1<br />
115-5-3 G 1<br />
115-6 G 1<br />
115-6-1 G 1<br />
115-6-2 G 1<br />
115-13 G 1<br />
115-15 G 1<br />
115-16 G 1<br />
115-18 G 1<br />
115-22 G 1<br />
115-24 G 1<br />
115-212 G 1<br />
115-512 G 1<br />
116-06 G 2<br />
116-06 M G 2<br />
116-06-1 G 2<br />
116-06-2 G 2<br />
116-06-4 G 2<br />
116-06-5 G 2<br />
116-06-5-1 G 2<br />
116-06-6 G 2<br />
116-06-8 G 2<br />
116-06-8-1 G 2<br />
116-06-8-2 G 2<br />
116-06-10 G 2<br />
116-08 G 2<br />
116-08-M G 2<br />
116-08-1 G 2<br />
116-08-2 G 2<br />
116-08-5 G 2<br />
116-08-6 G 2<br />
116-10 G 2<br />
116-10-2 G 2<br />
116-10-3 G 2<br />
119-08-18 A 9<br />
119-08-20 A 3<br />
120-502 E 2<br />
120-502 E E 2<br />
120-502-1 E 2<br />
120-502-1 E E 2<br />
120-502-4 E 2<br />
120-502-4 E E 2<br />
120-502-6 E 2<br />
120-502-6 E E 2<br />
120-520 E 2<br />
120-520 E E 2<br />
120-531 E 2<br />
120-531 E E 2<br />
120-531-1 E 2<br />
120-531-1 E E 2<br />
120-531-2 E 2<br />
120-531-2 E E 2<br />
120-531-4 E 2<br />
120-531-4 E E 2<br />
120-563 E 2<br />
120-563 E E 2<br />
120-570 E 2<br />
120-570 E E 2<br />
125-06-18 E 3<br />
125-06-20 E 3<br />
125-06-22 E 3<br />
125-06-22 E E 3<br />
125-06-24 E 3<br />
125-06-24 E E 3<br />
125-06-26 E 4<br />
125-06-26 E E 4<br />
125-06-26-1 E E 4<br />
125-06-28 E 4<br />
125-06-28 E E 4<br />
125-06-30 E 4<br />
125-06-30 E E 4<br />
125-08-18 E 3<br />
J 4
Allgemeine In<strong>for</strong>mationen<br />
General in<strong>for</strong>mations<br />
In<strong>for</strong>mations générales<br />
Nr. Seite Nr. Seite Nr. Seite<br />
125-08-20 B 12, E 3<br />
125-08-22 E 3<br />
125-08-22 E E 3<br />
125-08-24 E 3<br />
125-08-24 E E 3<br />
125-08-26 E 4<br />
125-08-26 E E 4<br />
125-08-28 E 4<br />
125-08-28 E E 4<br />
125-08-30 E 4<br />
125-08-30 E E 4<br />
125-10-20 E 3<br />
125-10-22 E 3<br />
125-10-22 E E 3<br />
125-10-24 E 3<br />
125-10-24 E E 3<br />
125-10-24-1 E 3<br />
125-10-24-1 E E 3<br />
125-10-26 E 4<br />
125-10-26 E E 4<br />
125-10-28 E 4<br />
125-10-28 E E 4<br />
125-10-30 E 4<br />
125-10-30 E E 4<br />
125-12-20 E 3<br />
125-12-24 E 4<br />
125-12-24 E E 4<br />
125-112 E 5<br />
125-112 E E 5<br />
125-113 E 5<br />
125-114 E 5<br />
125-114 E E 5<br />
125-116 E 5<br />
125-116 E E 5<br />
125-117 E 5<br />
125-117 E E 5<br />
125-118 E 5<br />
125-118 E E 5<br />
125-120 E 5<br />
125-120 E E 5<br />
125-121 E 5<br />
125-121 E E 5<br />
125-122 E 5<br />
125-122 E E 5<br />
125-124 E 5<br />
125-124 E E 5<br />
125-126 E 5<br />
125-126 E E 5<br />
125-146 E 6<br />
125-146 E E 6<br />
125-153 E 6<br />
125-153 E E 6<br />
125-501 E 6<br />
125-501 E E 6<br />
125-501-1 E 6<br />
125-501-1 E E 6<br />
125-503 B 3<br />
125-504 B 3<br />
125-504 E B 3<br />
125-504-6 E 6<br />
125-504-6 E E 6<br />
125-505 B 1, E 6<br />
125-505 E B 1, E 6<br />
125-506 E 6<br />
125-506 E E 6<br />
125-507 E 6<br />
125-507 E E 6<br />
125-507-01 E 6<br />
125-507-01 E E 6<br />
125-508 E 6<br />
125-508 E E 6<br />
125-509 E 7<br />
125-509 E E 7<br />
125-511 E 7<br />
125-511 E E 7<br />
125-512 B 8, E 7<br />
125-518 E 7<br />
125-518 E E 7<br />
125-519 E 7<br />
125-519 E E 7<br />
125-519-3 E 7<br />
125-519-3 E E 7<br />
125-520 E 7<br />
125-520 E E 7<br />
125-520-2 E 7<br />
125-520-2 E E 7<br />
125-520-6 E 7<br />
125-520-9 E 7<br />
125-520-9 E E 7<br />
125-522 E 7<br />
125-522 E E 7<br />
125-523 E 7<br />
125-523 E E 7<br />
125-524 E 8<br />
125-525 E 8<br />
125-525 E E 8<br />
125-526 E 8<br />
125-526 E E 8<br />
125-528 E 8<br />
125-528 E E 8<br />
125-531 E 8<br />
125-531 E E 8<br />
125-532 E 8<br />
125-532 E E 8<br />
125-533 E 8<br />
125-535 E 8<br />
125-535 E E 8<br />
125-536 E 8<br />
125-536 E E 8<br />
125-542 E 8<br />
125-542 E E 8<br />
125-547 E 8<br />
125-547 E E 8<br />
125-549 E 9<br />
125-549 E E 9<br />
125-550 E 9<br />
125-550 E E 9<br />
125-550-3 E 9<br />
125-550-3 E E 9<br />
125-555 E 9<br />
125-555 E E 9<br />
125-557-01 E 9<br />
125-557-01 E E 9<br />
125-558 E 9<br />
125-558 E E 9<br />
125-559 E 9<br />
125-559 E E 9<br />
125-560 E 9<br />
125-560 E E 9<br />
125-563 E 9<br />
125-563 E E 9<br />
125-569 E 9<br />
125-569 E E 9<br />
125-569-2 E 10<br />
125-569-2 E E 10<br />
125-569-3 E 10<br />
125-569-3 E E 10<br />
125-573 E 10<br />
J 5
Allgemeine In<strong>for</strong>mationen<br />
General in<strong>for</strong>mations<br />
In<strong>for</strong>mations générales<br />
Nr. Seite Nr. Seite Nr. Seite<br />
125-573 E E 10<br />
125-575 E 10<br />
125-575 E E 10<br />
125-582 E 10<br />
125-582 E E 10<br />
125-585 E 10<br />
125-585 E E 10<br />
125-587 E 10<br />
125-587 E E 10<br />
125-588 E 10<br />
125-588 E E 10<br />
125-588-2 E 10<br />
125-588-2 E E 10<br />
125-589 E 10<br />
125-589 E E 10<br />
125-590 E 11<br />
125-590 E E 11<br />
125-592 E 11<br />
125-592 E E 11<br />
125-594 E 11<br />
125-594 E E 11<br />
125-597 E 11<br />
125-597 E E 11<br />
125-702 E 11<br />
125-702 E E 11<br />
125-703 E 11<br />
125-703 E E 11<br />
125-706 E 11<br />
125-706 E E 11<br />
125-707 E 11<br />
125-707 E E 11<br />
125-708 E 11<br />
125-708 E E 11<br />
125-709 E 11<br />
125-709 E E 11<br />
125-713 E 12<br />
125-713 E E 12<br />
125-717 E 12<br />
125-717 E E 12<br />
125-718 E 12<br />
125-718 E E 12<br />
125-721 E 12<br />
125-721 E E 12<br />
125-722 E 12<br />
125-722 E E 12<br />
125-731-1 E 12<br />
125-731-1 E E 12<br />
125-733 E 12<br />
125-733 E E 12<br />
125-733-2 E 12<br />
125-733-2 E E 12<br />
125-735 E 12<br />
125-735 E E 12<br />
125-736 E 13<br />
125-736 E E 13<br />
125-744 E 13<br />
125-744 E E 13<br />
125-755 E 13<br />
125-755 E E 13<br />
125-757 E 13<br />
125-757 E E 13<br />
125-758 E 13<br />
125-758 E E 13<br />
125-762 E 13<br />
125-762 E E 13<br />
125-763 E 13<br />
125-763 E E 13<br />
125-764 E 13<br />
125-764 E E 13<br />
125-767 E 13<br />
125-767 E E 13<br />
125-767-2 E 13<br />
125-767-2 E E 13<br />
125-767-3 E 14<br />
125-767-3 E E 14<br />
125-788 E 14<br />
125-788 E E 14<br />
125-788-1 E 14<br />
125-788-1 E E 14<br />
125-799 E 14<br />
125-799 E E 14<br />
125-801 E 14<br />
125-801 E E 14<br />
125-802 E 14<br />
125-802 E E 14<br />
125-818 E 14<br />
125-818 E E 14<br />
125-818-3 E 14<br />
125-818-3 E E 14<br />
125-818-5 E 14<br />
125-818-5 E E 14<br />
125-821 E 14<br />
125-821 E E 14<br />
125-847 E 14<br />
125-847 E E 14<br />
125-852 E 15<br />
125-852 E E 15<br />
125-853 E 15<br />
125-853 E E 15<br />
125-857 E 15<br />
125-857 E E 15<br />
125-862 E 15<br />
125-862 E E 15<br />
125-867 E 15<br />
125-867 E E 15<br />
125-870 E 15<br />
125-870 E E 15<br />
125-873 E 15<br />
125-873 E E 15<br />
125-881 E 15<br />
125-881 E E 15<br />
125-883 E 15<br />
125-883 E E 15<br />
125-886 E 15<br />
125-886 E E 15<br />
125-891 E 16<br />
125-891 E E 16<br />
125-898 E 16<br />
125-898 E E 16<br />
125-900 E 16<br />
125-900 E E 16<br />
125-906 E 16<br />
125-906 E E 16<br />
125-907 E 16<br />
125-907 E E 16<br />
125-910 E 16<br />
125-910 E E 16<br />
125-912 E 16<br />
125-912 E E 16<br />
125-915 E 16<br />
125-915 E E 16<br />
125-915-1 E 16<br />
125-915-1 E E 16<br />
125-916 E 16<br />
125-916 E E 16<br />
125-919 E 17<br />
125-919 E E 17<br />
125-919-01 E 17<br />
J 6
Allgemeine In<strong>for</strong>mationen<br />
General in<strong>for</strong>mations<br />
In<strong>for</strong>mations générales<br />
Nr. Seite Nr. Seite Nr. Seite<br />
125-919-01 E E 17<br />
125-919-2 E 17<br />
125-919-2 E E 17<br />
125-926 E 17<br />
125-926 E E 17<br />
125-927 E 17<br />
125-927 E E 17<br />
125-939 E 17<br />
125-939 E E 17<br />
125-940 E 17<br />
125-940 E E 17<br />
125-941 E 17<br />
125-941 E E 17<br />
125-945 E 17<br />
125-945 E E 17<br />
125-947 E 17<br />
125-947 E E 17<br />
125-948 E 18<br />
125-948 E E 18<br />
125-954 E 18<br />
125-954 E E 18<br />
125-958 E 18<br />
125-958 E E 18<br />
125-963 E 18<br />
125-963 E E 18<br />
125-964 E 18<br />
125-964 E E 18<br />
125-966 E 18<br />
125-966 E E 18<br />
125-967 E 18<br />
125-967 E E 18<br />
125-968 E 18<br />
125-968 E E 18<br />
125-971 E 18<br />
125-971 E E 18<br />
125-971-1 E 19<br />
125-971-1 E E 19<br />
125-978 E 19<br />
125-978 E E 19<br />
125-978-1 E E 19<br />
125-983 E 19<br />
125-983 E E 19<br />
125-985 E 19<br />
125-985 E E 19<br />
125-987 E 19<br />
125-987 E E 19<br />
125-990 E 19<br />
125-991 E 19<br />
125-991 E E 19<br />
125-997 E 19<br />
125-997 E E 19<br />
125-999 E 19<br />
125-999 E E 19<br />
130-03-20 G 6<br />
130-03-24 G 6<br />
140-2 G 9<br />
140-3 G 9<br />
141 G 9<br />
150-03-18 E 1<br />
150-03-18 R E 1<br />
150-03-20 E 1<br />
150-03-20 R E 1<br />
150-03-22 E 1<br />
150-03-22 E E 1<br />
150-03-24 E 1<br />
150-03-24 E E 1<br />
150-03-24 R E 1<br />
150-03-24 ER E 1<br />
150-03-28 E 1<br />
150-03-28 E E 1<br />
150-532 E 1<br />
150-532 E E 1<br />
150-572 E 1<br />
150-572 E E 1<br />
170 G9<br />
170-1 G 9<br />
171 G 9<br />
173 G9<br />
188 G6<br />
215 A3<br />
215 E A 3<br />
217 A3<br />
970-2 G 9<br />
1742-541 C 5<br />
1742-542 C 5<br />
1742-543 C 5<br />
1742-544 C 5<br />
1742-545 C 5<br />
1742-546 C 5<br />
1742-547 C 5<br />
1742-562 C 5<br />
1742-563 C 5<br />
1742-564 C 5<br />
1742-565 C 5<br />
1742-566 C 5<br />
1742-567 C 5<br />
2000-02-20 F 1<br />
2000-02-24 F 1<br />
2000-02-24 R F 1<br />
2000-06-24 F 1<br />
2000-10-18 F 1<br />
2000-10-20 F 1<br />
2000-10-24 F 1<br />
2000-11-20 F 1<br />
2000-11-24 F 1<br />
2000-606 F 1<br />
2001-06-18 F 1<br />
2001-06-20 F 1<br />
2001-06-24 F 1<br />
2125-06-18 F 2<br />
2125-06-20 F 2<br />
2125-06-22 F 2<br />
2125-06-24 F 2<br />
2125-06-26 F 2<br />
2125-06-28 F 2<br />
2125-06-30 F 2<br />
2125-08-18 F 2<br />
2125-08-20 F 2<br />
2125-08-22 F 2<br />
2125-08-24 F 2<br />
2125-08-26 F 2<br />
2125-08-28 F 2<br />
2125-08-30 F 2<br />
2125-10-20 F 2<br />
2125-10-22 F 2<br />
2125-10-24 F 2<br />
2125-10-24-1 F 2<br />
2125-10-26 F 2<br />
2125-10-28 F 2<br />
2125-10-30 F 2<br />
2125-12-20 F 2<br />
2125-12-24 F 2<br />
2130-03-18 F 2<br />
2130-03-20 F 2<br />
2130-03-22 F 2<br />
2130-03-24 F 2<br />
2130-03-28 F 2<br />
2200-007-10 G 9<br />
J 7
Allgemeine In<strong>for</strong>mationen<br />
General in<strong>for</strong>mations<br />
In<strong>for</strong>mations générales<br />
Nr. Seite Nr. Seite Nr. Seite<br />
2300-06-20 R A 4, F 3<br />
2300-08-20-1 R A4, C 6, C8, F 3<br />
2301-06-18 F 3<br />
2301-06-20 F 3<br />
2301-06-20 R F 3<br />
2301-06-24 F 3<br />
2315 A 3<br />
2315-503 A 3<br />
2315-504 B 3<br />
2315-510 A 3<br />
2315-511 A 3<br />
2315-515 A 3<br />
2315-515-1 A 4<br />
2315-530 G C 10<br />
2315-531 G C 10<br />
2317 A 4<br />
2317-541 C 2<br />
2317-542 C 2<br />
2317-543 C 2<br />
2317-544 C 2<br />
2317-545 C 2<br />
2317-546 C 2<br />
2317-547 C 2<br />
2317-562 C 2<br />
2317-563 C 2<br />
2317-564 C 2<br />
2317-565 C 2<br />
2317-566 C 2<br />
2317-567 C 2<br />
2317-580-1 G C 8<br />
2319-08-20 A 4<br />
2319-212 V B 12<br />
2319-503 V A 4<br />
2319-504 V A 8<br />
2319-512 V B 9<br />
2320-502 F 4<br />
2320-502-1 F 4<br />
2320-502-4 F 4<br />
2320-502-6 F 4<br />
2320-520 F 4<br />
2320-531 F 4<br />
2320-531-1 F 4<br />
2320-531-2 F 4<br />
2320-531-4 F 4<br />
2320-563 F 4<br />
2320-570 F 4<br />
2320-591 F 4<br />
2325-06-18 F 4<br />
2325-06-20 F 4<br />
2325-06-22 F 4<br />
2325-06-24 F 4<br />
2325-06-26 F 5<br />
2325-06-28 F 5<br />
2325-06-30 F 5<br />
2325-08-18 F 4<br />
2325-08-20 B 12, F 4<br />
2325-08-22 F 4<br />
2325-08-24 F 4<br />
2325-08-26 F 5<br />
2325-08-28 F 5<br />
2325-08-30 F 5<br />
2325-10-20 F 4<br />
2325-10-22 F 4<br />
2325-10-24 F 4<br />
2325-10-24-1 F 4<br />
2325-10-26 F 5<br />
2325-10-28 F 5<br />
2325-10-30 F 5<br />
2325-12-20 F 4<br />
2325-12-24 F 5<br />
2325-20-2 G 7<br />
2325-20-3 G 7<br />
2325-28-2 G 7<br />
2325-112 F 5<br />
2325-113 F 5<br />
2325-114 F 5<br />
2325-116 F 5<br />
2325-117 F 5<br />
2325-118 F 5<br />
2325-120 F 5<br />
2325-121 F 5<br />
2325-122 F 5<br />
2325-124 F 5<br />
2325-126 F 5<br />
2325-146 F 5<br />
2325-153 F 5<br />
2325-153-1 F 5<br />
2325-501 F 6<br />
2325-501-1 F 6<br />
2325-503 B 3<br />
2325-504 B 3<br />
2325-504 V B 3<br />
2325-504-3 B 3<br />
2325-504-5 B 3<br />
2325-504-6 F 6<br />
2325-505 B 1, F 6<br />
2325-506 F 6<br />
2325-507 F 6<br />
2325-507-01 F 6<br />
2325-508 F 6<br />
2325-509 F 6<br />
2325-511 F 6<br />
2325-512 B 9, F 6<br />
2325-518 F 6<br />
2325-519 F 6<br />
2325-519-3 F 6<br />
2325-520 F 6<br />
2325-520-2 F 6<br />
2325-520-6 F 6<br />
2325-520-9 F 6<br />
2325-522 F 6<br />
2325-523 F 6<br />
2325-524 F 6<br />
2325-525 F 7<br />
2325-526 F 7<br />
2325-528 F 7<br />
2325-531 F 7<br />
2325-532 F 7<br />
2325-533 F 7<br />
2325-535 F 7<br />
2325-536 F 7<br />
2326-542 F 7<br />
2325-547 F 7<br />
2325-549 F 7<br />
2325-550 F 7<br />
2325-550-3 F 7<br />
2325-555 F 7<br />
2325-557-01 F 7<br />
2325-558 F 7<br />
2325-559 F 7<br />
2325-560 F 7<br />
2325-563 F 7<br />
2325-569 F 7<br />
2325-569-2 F 8<br />
2325-569-3 F 8<br />
2325-573 F 8<br />
2325-575 F 8<br />
2325-582 F 8<br />
J 8
Allgemeine In<strong>for</strong>mationen<br />
General in<strong>for</strong>mations<br />
In<strong>for</strong>mations générales<br />
Nr. Seite Nr. Seite Nr. Seite<br />
2325-585 F 8<br />
2325-587 F 8<br />
2325-588 F 8<br />
2325-588-2 F 8<br />
2325-589 F 8<br />
2325-590 F 8<br />
2325-592 F 8<br />
2325-594 F 8<br />
2325-597 F 8<br />
2325-702 F 8<br />
2325-703 F 8<br />
2325-706 F 8<br />
2325-707 F 8<br />
2325-708 F 8<br />
2325-709 F 8<br />
2325-713 F 9<br />
2325-717 F 9<br />
2325-718 F 9<br />
2325-721 F 9<br />
2325-722 F 9<br />
2325-725 F 9<br />
2325-731-1 F 9<br />
2325-733 F 9<br />
2325-733-2 F 9<br />
2325-735 F 9<br />
2325-736 F 9<br />
2325-744 F 9<br />
2325-755 F 9<br />
2325-757 F 9<br />
2325-758 F 9<br />
2325-762 F 9<br />
2325-763 F 9<br />
2325-764 F 9<br />
2325-767 F 9<br />
2325-767-2 F 9<br />
2325-767-3 F 10<br />
2325-788 F 10<br />
2325-788-1 F 10<br />
2325-799 F 10<br />
2325-801 F 10<br />
2325-802 F 10<br />
2325-818 F 10<br />
2325-818-3 F 10<br />
2325-818-5 F 10<br />
2325-821 F 10<br />
2325-847 F 10<br />
2325-852 F 10<br />
2325-853 F 10<br />
2325-857 F 10<br />
2325-862 F 10<br />
2325-867 F 10<br />
2325-870 F 10<br />
2325-873 F 10<br />
2325-881 F 10<br />
2325-883 F 10<br />
2325-886 F 10<br />
2325-891 F 11<br />
2325-898 F 11<br />
2325-900 F 11<br />
2325-906 F 11<br />
2325-907 F 11<br />
2325-910 F 11<br />
2325-912 F 11<br />
2325-915 F 11<br />
2325-915-1 F 11<br />
2325-916 F 11<br />
2325-919 F 11<br />
2325-919-01 F 11<br />
2325-919-2 F 11<br />
2325-926 F 11<br />
2325-927 F 11<br />
2325-939 F 11<br />
2325-940 F 11<br />
2325-941 F 11<br />
2325-945 F 11<br />
2325-947 F 11<br />
2325-948 F 12<br />
2325-954 F 12<br />
2325-958 F 12<br />
2325-963 F 12<br />
2325-964 F 12<br />
2325-966 F 12<br />
2325-967 F 12<br />
2325-968 F 12<br />
2325-971 F 12<br />
2325-971-1 F 12<br />
2325-978 F 12<br />
2325-983 F 12<br />
2325-985 F 12<br />
2325-987 F 12<br />
2325-990 F 12<br />
2325-991 F 12<br />
2325-997 F 12<br />
2325-999 F 12<br />
2330-03-18 A 8, F 3, G 3<br />
2330-03-18 R A 8, F 3, G 3<br />
2330-03-20 A 4, F 3, G 3<br />
2330-03-20 R A 4, F 3, G 3<br />
2330-03-22 F 3<br />
2330-03-24 C 6, F 3, G 3<br />
2330-03-24 R C 6, F 3, G 3<br />
2330-03-28 F 3<br />
2330-532 F 3<br />
2330-572 F 3<br />
2333-28 RG C 6<br />
2392-01-20 A 4, A 8<br />
2392-01-20-1 A 4<br />
2392-08-20 A 4<br />
2500-08-20-1 R A 5, C 6, F 13<br />
2592-01-20-1 A 5<br />
2815 A 5<br />
2815-503 A 5<br />
2815-504 B 4<br />
2815-510 A 5<br />
2815-511 A 5<br />
2815-515-1 A 5<br />
2817 A 5<br />
2817-541 C 3<br />
2817-542 C 3<br />
2817-543 C 3<br />
2817-544 C 3<br />
2817-545 C 3<br />
2817-546 C 3<br />
2817-547 C 3<br />
2817-562 C 3<br />
2817-563 C 3<br />
2817-564 C 3<br />
2817-565 C 3<br />
2817-566 C 3<br />
2817-567 C 3<br />
2820-502 F 13<br />
2820-502-1 F 13<br />
2820-502-4 F 13<br />
2820-502-6 F 13<br />
2820-520 F 13<br />
2820-531 F 13<br />
2820-531-1 F 13<br />
2820-531-2 F 13<br />
J 9
Allgemeine In<strong>for</strong>mationen<br />
General in<strong>for</strong>mations<br />
In<strong>for</strong>mations générales<br />
Nr. Seite Nr. Seite Nr. Seite<br />
2820-531-4 F 13<br />
2820-563 F 13<br />
2820-570 F 13<br />
2820-591 F 13<br />
2825-06-18 F 14<br />
2825-06-20 F 14<br />
2825-06-22 F 14<br />
2825-06-24 F 14<br />
2825-06-26 F 14<br />
2825-06-28 F 14<br />
2825-06-30 F 14<br />
2825-08-18 F 14<br />
2825-08-20 B 12, F 14<br />
2825-08-22 F 14<br />
2825-08-24 F 14<br />
2825-08-26 F 14<br />
2825-08-28 F 14<br />
2825-08-30 F 14<br />
2825-10-20 F 14<br />
2825-10-22 F 14<br />
2825-10-24 F 14<br />
2825-10-24-1 F 14<br />
2825-10-26 F 14<br />
2825-10-28 F 14<br />
2825-10-30 F 14<br />
2825-12-20 F 14<br />
2825-12-24 F 14<br />
2825-112 F 14<br />
2825-113 F 14<br />
2825-114 F 14<br />
2825-116 F 14<br />
2825-117 F 14<br />
2825-118 F 15<br />
2825-120 F 15<br />
2825-121 F 15<br />
2825-122 F 15<br />
2825-124 F 15<br />
2825-126 F 15<br />
2825-146 F 15<br />
2825-153 F 15<br />
2825-153-1 F 15<br />
2825-501 F 15<br />
2825-501-1 F 15<br />
2825-503 B 4<br />
2825-504 B 4<br />
2825-504-3 B 4<br />
2825-504-5 B 4<br />
2825-504-6 F 15<br />
2825-505 B 1, F 15<br />
2825-506 F 15<br />
2825-507 F 15<br />
2825-507-01 F 15<br />
2825-508 F 15<br />
2825-509 F 15<br />
2825-511 F 15<br />
2825-512 B 9, F 15<br />
2825-518 F 15<br />
2825-519 F 15<br />
2825-519-3 F 16<br />
2825-520 F 16<br />
2825-520-2 F 16<br />
2825-520-6 F 16<br />
2825-520-9 F 16<br />
2825-522 F 16<br />
2825-523 F 16<br />
2825-524 F 16<br />
2825-525 F 16<br />
2825-526 F 16<br />
2825-528 F 16<br />
2825-531 F 16<br />
2825-532 F 16<br />
2825-533 F 16<br />
2825-535 F 16<br />
2825-536 F 16<br />
2825-542 F 16<br />
2825-547 F 16<br />
2825-549 F 16<br />
2825-550 F 16<br />
2825-550-3 F 16<br />
2825-555 F 16<br />
2825-557-01 F 17<br />
2825-558 F 17<br />
2825-559 F 17<br />
2825-560 F 17<br />
2825-563 F 17<br />
2825-569 F 17<br />
2825-569-2 F 17<br />
2825-569-3 F 17<br />
2825-573 F 17<br />
2825-575 F 17<br />
2825-582 F 17<br />
2825-585 F 17<br />
2825-587 F 17<br />
2825-588 F 17<br />
2825-588-2 F 17<br />
2825-589 F 17<br />
2825-590 F 17<br />
2825-592 F 17<br />
2825-594 F 17<br />
2825-597 F 17<br />
2825-702 F 17<br />
2825-703 F 18<br />
2825-706 F 18<br />
2825-707 F 18<br />
2825-708 F 18<br />
2825-709 F 18<br />
2825-713 F 18<br />
2825-717 F 18<br />
2825-718 F 18<br />
2825-721 F 18<br />
2825-722 F 18<br />
2825-725 F 18<br />
2825-731-1 F 18<br />
2825-733 F 18<br />
2825-733-2 F 18<br />
2825-735 F 18<br />
2825-736 F 18<br />
2825-744 F 18<br />
2825-755 F 18<br />
2825-757 F 18<br />
2825-758 F 18<br />
2825-762 F 18<br />
2825-763 F 19<br />
2825-764 F 19<br />
2825-767 F 19<br />
2825-767-2 F 19<br />
2825-767-3 F 19<br />
2825-788 F 19<br />
2825-788-1 F 19<br />
2825-799 F 19<br />
2825-801 F 19<br />
2825-802 F 19<br />
2825-818 F 19<br />
2825-818-3 F 19<br />
2825-818-5 F 19<br />
2825-821 F 19<br />
2825-847 F 19<br />
2825-852 F 19<br />
J 10
Allgemeine In<strong>for</strong>mationen<br />
General in<strong>for</strong>mations<br />
In<strong>for</strong>mations générales<br />
Nr. Seite Nr. Seite Nr. Seite<br />
2825-853 F 19<br />
2825-857 F 19<br />
2825-862 F 19<br />
2825-867 F 19<br />
2825-870 F 19<br />
2825-873 F 19<br />
2825-881 F 20<br />
2825-883 F 20<br />
2825-886 F 20<br />
2825-891 F 20<br />
2825-898 F 20<br />
2825-900 F 20<br />
2825-906 F 20<br />
2825-907 F 20<br />
2825-910 F 20<br />
2825-912 F 20<br />
2825-915 F 20<br />
2825-915-1 F 20<br />
2825-916 F 20<br />
2825-919 F 20<br />
2825-919-01 F 20<br />
2825-919-2 F 20<br />
2825-926 F 20<br />
2825-927 F 20<br />
2825-939 F 20<br />
2825-940 F 20<br />
2825-941 F 21<br />
2825-945 F 21<br />
2825-947 F 21<br />
2825-948 F 21<br />
2825-954 F 21<br />
2825-958 F 21<br />
2825-963 F 21<br />
2825-964 F 21<br />
2825-966 F 21<br />
2825-967 F 21<br />
2825-968 F 21<br />
2825-971 F 21<br />
2825-971-1 F 21<br />
2825-978 F 21<br />
2825-983 F 21<br />
2825-985 F 21<br />
2825-987 F 21<br />
2825-990 F 21<br />
2825-991 F 21<br />
2825-997 F 21<br />
2825-999 F 21<br />
2830-03-18 A 8, F 13<br />
2830-03-18 R A 8, F 13<br />
2830-03-20 A 5, F 13<br />
2830-03-20 R A 5, F 13<br />
2830-03-22 F 13<br />
2830-03-24 C 6, F 13<br />
2830-03-24 R C 6, F 13<br />
2830-03-28 F 13<br />
2830-532 F 13<br />
2830-572 F 13<br />
2833-28 RG C 6<br />
2892-01-20 A 5, A 8<br />
3600-08-20 R A 6, C 7, C 8,<br />
C 10, F 22<br />
3615 A 6<br />
3615-503 A 6<br />
3615-504 B 4<br />
3615-510 A 6<br />
3615-511 A 6<br />
3615-515-1 A 6<br />
3615-530 G C 10<br />
3615-531 G C 10<br />
3617 A 6<br />
3617-541 C 4<br />
3617-542 C 4<br />
3617-543 C 4<br />
3617-544 C 4<br />
3617-545 C 4<br />
3617-546 C 4<br />
3617-547 C 4<br />
3617-562 C 4<br />
3617-563 C 4<br />
3617-564 C 4<br />
3617-565 C 4<br />
3617-566 C 4<br />
3617-567 C 4<br />
3617-580-1 G C 8<br />
3620-502 F 22<br />
3620-502-1 F 22<br />
3620-502-4 F 22<br />
3620-502-6 F 22<br />
3620-520 F 22<br />
3620-531 F 22<br />
3620-531-1 F 22<br />
3620-531-2 F 22<br />
3620-531-4 F 22<br />
3620-563 F 22<br />
3620-570 F 22<br />
3620-591 F 22<br />
3625-06-18 F 23<br />
3625-06-20 F 23<br />
3625-06-22 F 23<br />
3625-06-24 F 23<br />
3625-06-26 F 23<br />
3625-06-28 F 23<br />
3625-06-30 F 23<br />
3625-08-18 F 23<br />
3625-08-20 B 12, F 23<br />
3625-08-22 F 23<br />
3625-08-24 F 23<br />
3625-08-26 F 23<br />
3625-08-28 F 23<br />
3625-08-30 F 23<br />
3625-10-20 F 23<br />
3625-10-22 F 23<br />
3625-10-24 F 23<br />
3625-10-24-1 F 23<br />
3625-10-26 F 23<br />
3625-10-28 F 23<br />
3625-10-30 F 23<br />
3625-12-20 F 23<br />
3625-12-24 F 23<br />
3625-20-2 G 7<br />
3625-20-3 G 7<br />
3625-112 F 23<br />
3625-113 F 23<br />
3625-114 F 23<br />
3625-116 F 23<br />
3625-117 F 23<br />
3625-118 F 24<br />
3625-120 F 24<br />
3625-121 F 24<br />
3625-122 F 24<br />
3625-124 F 24<br />
3625-126 F 24<br />
3625-146 F 24<br />
3625-153 F 24<br />
3625-153-1 F 24<br />
3625-501 F 24<br />
3625-501-1 F 24<br />
3625-503 B 4<br />
J 11
Allgemeine In<strong>for</strong>mationen<br />
General in<strong>for</strong>mations<br />
In<strong>for</strong>mations générales<br />
Nr. Seite Nr. Seite Nr. Seite<br />
3625-504 B 4<br />
3625-504-3 B 4<br />
3625-504-5 B 4<br />
3625-504-6 F 24<br />
3625-505 B 1, F 24<br />
3625-506 F 24<br />
3625-507 F 24<br />
3625-507-01 F 24<br />
3625-508 F 24<br />
3625-509 F 24<br />
3625-511 F 24<br />
3625-512 B 9, F 24<br />
3625-518 F 24<br />
3625-519 F 24<br />
3625-519-3 F 25<br />
3625-520 F 25<br />
3625-520-2 F 25<br />
3625-520-6 F 25<br />
3625-520-9 F 25<br />
3625-522 F 25<br />
3625-523 F 25<br />
3625-524 F 25<br />
3625-525 F 25<br />
3625-526 F 25<br />
3625-528 F 25<br />
3625-531 F 25<br />
3625-532 F 25<br />
3625-533 F 25<br />
3625-535 F 25<br />
3625-536 F 25<br />
3625-542 F 25<br />
3625-547 F 25<br />
3625-549 F 25<br />
3625-550 F 25<br />
3625-550-3 F 25<br />
3625-555 F 25<br />
3625-557-01 F 26<br />
3625-558 F 26<br />
3625-559 F 26<br />
3625-560 F 26<br />
3625-563 F 26<br />
3625-569 F 26<br />
3625-569-2 F 26<br />
3625-569-3 F 26<br />
3625-573 F 26<br />
3625-575 F 26<br />
3625-582 F 26<br />
3625-585 F 26<br />
3625-587 F 26<br />
3625-588 F 26<br />
3625-588-2 F 26<br />
3625-589 F 26<br />
3625-590 F 26<br />
3625-592 F 26<br />
3625-594 F 26<br />
3625-597 F 26<br />
3625-702 F 26<br />
3625-703 F 27<br />
3625-706 F 27<br />
3625-707 F 27<br />
3625-708 F 27<br />
3625-709 F 27<br />
3625-713 F 27<br />
3625-717 F 27<br />
3625-718 F 27<br />
3625-721 F 27<br />
3625-722 F 27<br />
3625-725 F 27<br />
3625-731-1 F 27<br />
3625-733 F 27<br />
3625-733-2 F 27<br />
3625-735 F 27<br />
3625-736 F 27<br />
3625-744 F 27<br />
3625-755 F 27<br />
3625-757 F 27<br />
3625-758 F 27<br />
3625-762 F 27<br />
3625-763 F 28<br />
3625-764 F 28<br />
3625-767 F 28<br />
3625-767-2 F 28<br />
3625-767-3 F 28<br />
3625-788 F 28<br />
3625-788-1 F 28<br />
3625-799 F 28<br />
3625-801 F 28<br />
3625-802 F 28<br />
3625-818 F 28<br />
3625-818-3 F 28<br />
3625-818-5 F 28<br />
3625-821 F 28<br />
3625-847 F 28<br />
3625-852 F 28<br />
3625-853 F 28<br />
3625-857 F 28<br />
3625-862 F 28<br />
3625-867 F 28<br />
3625-870 F 28<br />
3625-873 F 28<br />
3625-881 F 29<br />
3625-883 F 29<br />
3625-886 F 29<br />
3625-891 F 29<br />
3625-898 F 29<br />
3625-900 F 29<br />
3625-906 F 29<br />
3625-907 F 29<br />
3625-910 F 29<br />
3625-912 F 29<br />
3625-915 F 29<br />
3625-915-1 F 29<br />
3625-916 F 29<br />
3625-919 F 29<br />
3625-919-01 F 29<br />
3625-919-2 F 29<br />
3625-926 F 29<br />
3625-927 F 29<br />
3625-939 F 29<br />
3625-940 F 30<br />
3625-941 F 30<br />
3625-945 F 30<br />
3625-947 F 30<br />
3625-948 F 30<br />
3625-954 F 30<br />
3625-958 F 30<br />
3625-963 F 30<br />
3625-964 F 30<br />
3625-966 F 30<br />
3625-967 F 30<br />
3625-968 F 30<br />
3625-971 F 30<br />
3625-971-1 F 30<br />
3625-978 F 30<br />
3625-983 F 30<br />
3625-985 F 30<br />
3625-987 F 30<br />
3625-990 F 30<br />
J 12
Allgemeine In<strong>for</strong>mationen<br />
General in<strong>for</strong>mations<br />
In<strong>for</strong>mations générales<br />
Nr. Seite Nr. Seite Nr. Seite<br />
3625-991 F 30<br />
3625-997 F 30<br />
3625-999 F 30<br />
3630-03-18 A 8, F 22<br />
3630-03-18 R A 8, F 22<br />
3630-03-20 A 6, F 22<br />
3630-03-20 R A 6, F 22<br />
3630-03-22 F 22<br />
3630-03-24 C 7, F 22<br />
3630-03-24 R C 7, F 22<br />
3630-03-28 F 22<br />
3630-532 F 22<br />
3630-572 F 22<br />
3633-28 RG C 7<br />
3692-01-20 A 6, A 8<br />
6325-... G 5<br />
6330-03-18 G 5<br />
6330-03-20 G 5<br />
6330-03-24 G 5<br />
6391-01-18 G 3<br />
6391-01-20 G 3<br />
6391-02-18 G 4<br />
6391-02-20 G 4<br />
6391-03-18 G 3<br />
6391-03-20 G 3<br />
6391-04-18 G 4<br />
6391-04-20 G 4<br />
6392-01-20 G 5<br />
6392-02-18 G 4<br />
6392-02-20 G 4<br />
6392-03-18 G 3<br />
6392-03-20 G 3<br />
6392-04-18 G 4<br />
6392-04-20 G 4<br />
6392-05-18 G 3<br />
6392-05-20 G 3<br />
7033-F 16 G 8<br />
7033-F 20 G 8<br />
7320-... G 3<br />
7325-... G 3<br />
8028 G 3<br />
8030 G10<br />
8031 G10<br />
8032 G10<br />
8033 G10<br />
8034 G11<br />
8035-45-F-16 G 8<br />
8035-45-F-18 G 8<br />
8035-45-F-20 G 8<br />
8035-45-F-24 G 8<br />
8035-45-F-30 G 8<br />
8035-45-P-6-22 G 8<br />
8035-45-P-6-24 G 8<br />
8035-45-P-8-22 G 8<br />
8035-45-P-8-24 G 8<br />
8036 G11<br />
8037 G 11<br />
8040 A 7, A 9<br />
8041 A 7, A 9<br />
8041-03-24 F 34<br />
8041-070 B 9<br />
8041-097 B 12<br />
8041-580 F 34<br />
8042 A 7, A 9, C 7<br />
8042-03-24 F 34<br />
8042-06-20-2 F 34<br />
8042-06-24 F 34<br />
8042-08-24 F 34<br />
8042-003 F 34<br />
8042-004 F 34<br />
8042-007 F 34<br />
8042-010 B 1, B 4<br />
8042-011 F 34<br />
8042-012 F 34<br />
8042-013 F 34<br />
8042-014 F 34<br />
8042-015 F 34<br />
8042-017 F 34<br />
8042-018 F 34<br />
8042-023 F 34<br />
8042-025 F 34<br />
8042-026 F 34<br />
8042-027 F 34<br />
8042-028 F 34<br />
8042-029 F 34<br />
8042-031 F 35<br />
8042-039 F 35<br />
8042-045 F 35<br />
8042-046 F 35<br />
8042-047 F 35<br />
8042-048 F 35<br />
8042-050 F 35<br />
8042-051 F 35<br />
8042-053 F 35<br />
8042-056 F 35<br />
8042-060 F 35<br />
8042-062 F 35<br />
8042-063 F 35<br />
8042-064 F 35<br />
8042-065 F 35<br />
8042-069 F 35<br />
8042-071 F 35<br />
8042-073 F 35<br />
8042-087 F 35<br />
8042-089 F 35<br />
8042-090 F 35<br />
8045-01-18 A 9<br />
8045-01-20 A 7<br />
8045-01-20-1 A 7<br />
8050-01-18 F 31<br />
8050-01-20 F 31<br />
8050-01-24 F 31<br />
8050-01-24-8 F 31<br />
8050-01-26 F 31<br />
8050-02-18 F 31<br />
8050-02-20 F 31<br />
8050-02-24 F 31<br />
8050-02-26 F 31<br />
8050-03-18 D 1<br />
8050-03-18 R D 1<br />
8050-03-20 D 1<br />
8050-03-20 R D 1<br />
8050-03-22 D 1<br />
8050-03-22 E D 1<br />
8050-03-24 D 1<br />
8050-03-24 E D 1<br />
8050-03-24 R D 1<br />
8050-03-24 ER D 1<br />
8050-03-24-3 E D 1<br />
8050-03-28 D 1<br />
8050-03-28 E D 1<br />
8050-05 F 31<br />
8050-05-2 F 31<br />
8050-05-41 C 6<br />
8050-07 F 31<br />
8050-07-2 F 31<br />
8050-07-2-4 F 31<br />
8050-07-2-9 F 31<br />
J 13
Allgemeine In<strong>for</strong>mationen<br />
General in<strong>for</strong>mations<br />
In<strong>for</strong>mations générales<br />
Nr. Seite Nr. Seite Nr. Seite<br />
8050-07-2-11 F 31<br />
8050-07-2-12 F 31<br />
8050-07-2-15 F 31<br />
8050-07-2-18 F 31<br />
8050-07-2-15 F 31<br />
8050-07-2-18 F 31<br />
8050-07-2-19 F 31<br />
8050-07-2-20 F 31<br />
8050-07-2-21 F 31<br />
8050-532 D 1<br />
8050-532 E D 1<br />
8050-572 D 1<br />
8050-572 E D 1<br />
8050-601 F 31<br />
8070-1 G 9<br />
8092-01-20 A 7<br />
8092-10-18 A 9<br />
8092-183 F 31<br />
8092-601 F 31<br />
8092-601-1 F 31<br />
8092-602 B 1, F 31<br />
8092-603 B 4<br />
8092-604 F 31<br />
8092-605 F 31<br />
8092-606 F 31<br />
8092-607 F 31<br />
8092-608 F 32<br />
8092-610 F 32<br />
8092-611 F 32<br />
8092-611-1 F 32<br />
8092-612 B 9, B 12, F 32<br />
8092-613 F 32<br />
8092-614 F 32<br />
8092-615 F 32<br />
8092-617 F 32<br />
8092-619 F 32<br />
8092-620 F 32<br />
8092-621 F 32<br />
8092-625 F 32<br />
8092-626 F 32<br />
8092-628 F 32<br />
8092-631 F 32<br />
8092-636 F 32<br />
8092-642 F 32<br />
8092-643 F 32<br />
8092-645 F 32<br />
8092-647 F 32<br />
8092-655 F 32<br />
8092-658 F 32<br />
8092-658-1 F 32<br />
8092-669 F 32<br />
8092-673 F 32<br />
8092-685 F 32<br />
8092-687 F 32<br />
8092-687-1 F 32<br />
8092-688 F 32<br />
8092-689 F 33<br />
8092-690 F 33<br />
8092-694 F 33<br />
8092-707 F 33<br />
8092-709 F 33<br />
8092-717 F 33<br />
8092-718 F 33<br />
8092-729 F 33<br />
8092-731 F 33<br />
8092-755 F 33<br />
8092-767-2 F 33<br />
8092-788 F 33<br />
8092-818-1 F 33<br />
8092-818-2 F 33<br />
8092-818-5 F 33<br />
8092-867 F 33<br />
8092-873 F 33<br />
8092-873-1 F 33<br />
8092-873-5 F 33<br />
8092-898 F 33<br />
8092-915 F 33<br />
8092-919 F 33<br />
8092-945 F 33<br />
8092-958 F 33<br />
8092-958 F 33<br />
8092-963 F 33<br />
8092-964 F 33<br />
8092-966 F 33<br />
8092-999 F 33<br />
8200 G 9<br />
D 2530-212 V B 14<br />
D 2530-280 EG-W 654 C 9<br />
D 2530-280 EGT-W 654 C 9<br />
D 2530-504 V B 7<br />
D 2530-512 V B 11<br />
D 2550-212 V B 14<br />
D 2550-504 V B 7<br />
D 2550-512 V B 11<br />
D 2560-212 V B 14<br />
D 2560-230 EG-W 161 C 11<br />
D 2560-230 EGT-W 161 C 11<br />
D 2560-280- EG-W 652 C 9<br />
D 2560-280 EGT-W 652 C 9<br />
D 2560-504 V B 7<br />
D 2560-512 V B 11<br />
M 2530-212 V B 13<br />
M 2530-504-1 B 5<br />
M 2530-504-1 T B 5<br />
M 2530-504-1 V B 5<br />
M 2530-504-3 B 5<br />
M 2530-504-3 T B 5<br />
M 2530-512 V B 10<br />
M 2560-212 V B 13<br />
M 2560-504-1 B 6<br />
M 2560-504-1 T B 6<br />
M 2560-504-1 V B 6<br />
M 2560-504-3 B 6<br />
M 2560-504-3 T B 6<br />
M 2560-504 V B 6<br />
M 2560-512 V B 10<br />
S 60-... G 10-11<br />
S 6010 G 10-11<br />
S 6020 G 10-11<br />
J 14