Kegelradgetriebe 150401 Nov_06:Kegelradgetr_dt-en.qxd.qxd
Kegelradgetriebe 150401 Nov_06:Kegelradgetr_dt-en.qxd.qxd
Kegelradgetriebe 150401 Nov_06:Kegelradgetr_dt-en.qxd.qxd
Sie wollen auch ein ePaper? Erhöhen Sie die Reichweite Ihrer Titel.
YUMPU macht aus Druck-PDFs automatisch weboptimierte ePaper, die Google liebt.
Technical datas<br />
Effici<strong>en</strong>cy η<br />
Housing and flange<br />
For nominal input<br />
power<br />
Design<br />
Material<br />
Special design<br />
Gearbox size<br />
50 100 - 230 250 - 400 500 + 600<br />
0,85 ≤ η ≤ 0,94 0,9 ≤ η ≤ 0,94 0,95 ≤ η ≤ 0,96 0,96 ≤ η ≤ 0,98<br />
Cube formed<br />
Cast iron EN-GJL-250 (EN-JL-1040) or spheroidal graphite iron EN-GJS-400-15<br />
(EN-JS-1040) or EN AC-AISi10Mg a T6 (EN-AB-43000)<br />
Housing and flanges aluminium<br />
Cast steel or welded construction<br />
Stainless steel<br />
Galvanic coating<br />
Shaft<br />
Hollow shaft<br />
Bevel gear set<br />
Connection hub to shaft<br />
Oil seals<br />
Bearings<br />
Lubrication<br />
Surface treatm<strong>en</strong>t<br />
Noise<br />
Bearing life time<br />
Design<br />
Tolerance<br />
Material<br />
Special design<br />
Design<br />
Tolerance<br />
Material<br />
Special design<br />
Design<br />
Material<br />
Special design<br />
Design<br />
Design<br />
Material<br />
Special design<br />
Design<br />
Special design<br />
Design<br />
Mounting position<br />
Filling capacity<br />
Special design<br />
Design<br />
Color shade<br />
Special design<br />
Shaft c<strong>en</strong>tering DIN 332, page 2<br />
With keyway DIN 6885, page1<br />
j6 resp. k6<br />
C 45 (1.0503) or 42 Cr Mo 4V (1.7225)<br />
Stainless steel or chromium coated<br />
Shafts without key and keyway<br />
Involute spline shaft DIN 5480 and 5482<br />
Spline shaft profile DIN 5463<br />
With keyway or without keyway and with shrink disc<br />
H7<br />
C 45 (1.0503)<br />
Stainless steel<br />
Involute spline bore DIN 5480 and 5482<br />
Spline shaft bore profile DIN 5463<br />
Cast bronze design<br />
Klingelnberg Polloid resp. Klingelnberg Zyklo-Palloid spiral teeth<br />
Optimized for low noise and high torque<br />
Milled teeth, case-hard<strong>en</strong>ed and lapped in pairs<br />
16 Mn Cr 5 (1.7131) or 17 Cr Ni Mo 6 (1.6587)<br />
To noise or torque optimized gearset<br />
ZPG-gearset ( case-hard<strong>en</strong>ed and teeth fine grinded to quality 4 )<br />
Force-fitted resp. form-fitted<br />
Parts are shrunk fitted<br />
With or without dust lip DIN 3760<br />
NBR or Viton<br />
Special oil seals, PTFE, Labyrinth seals<br />
Ball bearings and taper roller bearings<br />
Reinforced bearings for higher radial and axial load<br />
DIN 51502 mineral grease or oil, speed dep<strong>en</strong>d<strong>en</strong>t<br />
Advised with your order<br />
Dep<strong>en</strong>d<strong>en</strong>t to mounting position, see maint<strong>en</strong>ance manual<br />
Mineral and synthetic special grease and oil lubrication<br />
Grease and oil for food processing<br />
Special high or deep temperatur oil<br />
Forced oil lubrication<br />
Under coat<br />
RAL 7035 light-grey<br />
Under coat in special colours<br />
Galvanic coating<br />
approx. 75 dB(A) in 1m distance<br />
approx. 20 000 hours by 1500 rpm<br />
Max. gearbox temperature<br />
80 0 C ( 176 0 F )<br />
7
Change language