Heat management - LED Linear
Heat management - LED Linear
Heat management - LED Linear
Sie wollen auch ein ePaper? Erhöhen Sie die Reichweite Ihrer Titel.
YUMPU macht aus Druck-PDFs automatisch weboptimierte ePaper, die Google liebt.
22/07/2013<br />
<strong>LED</strong> <strong>Linear</strong> – Outstanding quality measures<br />
Leistungsdichte/<br />
Power Density (W/cm 2 )<br />
Thermischer Widerstand/<br />
Thermal Resistance Rth j-c<br />
ECO LD4 0,06 73<br />
ATON 0,10 220<br />
ATON Plus 0,13 220<br />
DONAR 0,11 45<br />
SOL 0,18 50<br />
APOLLO 0,21 45<br />
HERCULES 0,36 30<br />
ZEUS 0,42 30<br />
Thermischer Übergangswiderstand<br />
Vario<strong>LED</strong> Flex<br />
zwischen Chip Junction<br />
und Tc-Punkt<br />
Thermal resistance of<br />
Vario<strong>LED</strong> Flex between<br />
Chip-Junction and Tc-point<br />
Leistungsdichte/<br />
Power Density (W/cm 2 )<br />
Thermischer Widerstand/<br />
Thermal Resistance Rth j-c<br />
HYDRA LD5 0,05 73<br />
HYDRA LD10 0,10 68<br />
HYDRA LD18 0,19 68<br />
HYDRA HD6 0,06 73<br />
HYDRA HD10 0,10 73<br />
HYDRA HD20 0,20 68<br />
Ausgelegt für 50.000 Stunden Lebensdauer<br />
Der Lichtstrom sowie die Lebensdauer von <strong>LED</strong> Produkten sind<br />
direkt und exponentiell proportional zur Wärmeentwicklung des<br />
<strong>LED</strong>-Chips, also an der Stelle, wo das Licht entsteht. Diese Stelle<br />
wird allgemein als T-Junction (Tj) bezeichnet. Bei der Entwicklung<br />
von <strong>LED</strong> <strong>Linear</strong> Produkten achten wir besonders darauf,<br />
dass bei einer Umgebungstemperatur von Ta = 45 °C die Temperatur<br />
an der Junction Tj = 95 °C nicht übersteigt. Damit können<br />
wir Lebensdauern von mindestens 50.000 Stunden garantieren.<br />
Zusätzlich betreiben wir den Großteil unserer <strong>LED</strong> Produkte<br />
deutlich unterhalb der maximalen Strombelastbarkeit. Auch die<br />
Reduzierung dieser Stromdichte trägt zur deutlichen Verlängerung<br />
der Lebensdauer bei.<br />
Designed for 50,000 hours lifetime<br />
The light output and lifetime of <strong>LED</strong>s are directly and exponentially<br />
related to the heat at <strong>LED</strong> chip level, i. e. the location<br />
where the light is physically created. This location is known as<br />
T-Junction (Tj). During the design of <strong>LED</strong> <strong>Linear</strong> products we<br />
take care that the junction temperature will not rise over<br />
Tj = 95 °C at ambient temperature levels of Ta = 45 °C. Therefore<br />
we can guarantee a lifetime of more than 50,000 hours.<br />
Additionally we drive our <strong>LED</strong> products well below the maximum<br />
rated <strong>LED</strong> current. The reduction of the current density significantly<br />
improves the <strong>LED</strong> lifetime.<br />
409