MODEL N0: USER MANUAL - Zenec
MODEL N0: USER MANUAL - Zenec MODEL N0: USER MANUAL - Zenec
WARNINGS 1. Only connect this unit to a 12V DC power supply with negative grounding. 2. Never install this unit where the operation for safe driving is restrained. 3. Never use the video display function in the front when driving to prevent the violation of laws & regulations and also to reduce the risk of traffic accident, except when using the rear view video camera. 4. Never expose this unit, amplifier, speakers to moisture or water to prevent electronic sparks or fires. 5. Please don‘t change the fuse in the power cord without professional guidance, improper fuse may cause damage to this unit or may even cause fire. 6. Please power off this unit at once and send it back to the after-sales service center or the dealer/distributor you purchased from if one of the following symptoms is found: (a) No audio output; (b) No image output; (c) Water or other obstacle entered the unit; (d) Smoke; (e) Peculiar smell. 7. To ensure safe driving, please adjust the volume to a safe and comfort level in case of emergency situations. 4
ZE-NC514 PRECAUTIONS 1. Never disassemble or a djust the unit without any professional guide. For details, please consult an authorized ZENEC dealer for inquiry. 2. lf the front panel or TFT monitor is squalid, please use a clean silicone cloth and neutral detergent to wipe off the spot. Using a rough cloth and non-neutral detergent such as alcohol for cleaning may result in scratching or discoloration. 3. lf any abnormal behavior of the unit is found, please refer to trouble shooting guide of this manual. lf no relevant information is found, please press the [RESET] key on the front panel to resume factory default. 4. lf you have parked the car in hot or cold weather for a long time, please wait until the temperature in the car becomes normal before operating the unit. 5. Using in-car heater in low temperature environment may result in condensation inside the unit. DO NOT use the unit in this situation, eject the disc and wipe off the condensation on the disc. lf the unit still doesn't work after a few hours, please contact with after-sales service center. 6. No fierce mechanical impact to the LCD monitor when it is in open position for preventing the damage to any mechanisms inside. 7. To prevent damage to the screen, avoid touching it with sharp objects. 8. The monitor employs auto motorizing mechanism, please don't push, pull, or swivel the monitor manually to prevent damage to the core mechanism. 9. To provide a clear demonstration and an alternative for easy understanding to the operation of this unit, graphic illustrations are used. However, these illustrations may be different from the actual images displayed on the screen. 10. During operating the unit, " " will display if the current operation is not available or illegal. 11. Operate the unit correctly according to this manual to prevent unnecessary problems. The guarantee won't be valid if the problem is caused by inappropriate operation. DECLARATION This product incorporates copyright protection technology that is protected by U.S patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. 5
- Seite 1 und 2: MODEL N0: 1-DIN DVD-NAVICEIVER WITH
- Seite 3: ZE-NC514 USB MODE SELECT USB AS PLA
- Seite 7 und 8: ZE-NC514 BEFORE USING 10. [ ] Key:
- Seite 9 und 10: ZE-NC514 BEFORE USING NOTES FOR REM
- Seite 11 und 12: ZE-NC514 BASIC OPERATIONS DISPLAY S
- Seite 13 und 14: ZE-NC514 RADIO MODE MANUAL SAVE Whe
- Seite 15 und 16: ZE-NC514 RDS OPERATIONS PTY FUNCTIO
- Seite 17 und 18: ZE-NC514 DISC MODE ONSCREEN CONTROL
- Seite 19 und 20: ZE-NC514 DISC MODE REPEAT PLAYBACK
- Seite 21 und 22: ZE-NC514 DISC MODE DVD MENU AND TLT
- Seite 23 und 24: ZE-NC514 DISC MODE For VCD 1. Disc
- Seite 25 und 26: ZE-NC514 USB MODE CHANGE FOLDER ■
- Seite 27 und 28: ZE-NC514 IPOD MODE VIDEO PLAYBACK 1
- Seite 29 und 30: ZE-NC514 OTHER MODES AV-IN ■ Exte
- Seite 31 und 32: ZE-NC514 SETUP GENERAL ■ Clock mo
- Seite 33 und 34: ZE-NC514 SETUP You should set a new
- Seite 35 und 36: ZE-NC514 SETUP ■ Source Select on
- Seite 37 und 38: ZE-NC514 TROUBLESHOOTING ■ What a
- Seite 39 und 40: ZE-NC514 DEVICE CONNECTIONS NOTES O
- Seite 41 und 42: ZE-NC514 DEVICE CONNECTIONS PARKING
- Seite 43 und 44: ZE-NC514 INSTALLATION AND UNINSTALL
- Seite 45 und 46: ZE-NC514 SPECIFICATIONS General Ref
- Seite 47 und 48: ZE-NC514 APPENDIX REGION CODE Accor
- Seite 49 und 50: ZE-NC514 2 YEARS LIMITED WARRANTY D
- Seite 51 und 52: ZE-NC514 MODE USB SÉLECTIONNER L'U
- Seite 53 und 54: ZE-NC514 PRÉCAUTIONS 1. Ne jamais
ZE-NC514<br />
PRECAUTIONS<br />
1. Never disassemble or a djust the unit without any professional guide. For details,<br />
please consult an authorized ZENEC dealer for inquiry.<br />
2. lf the front panel or TFT monitor is squalid, please use a clean silicone cloth and neutral<br />
detergent to wipe off the spot. Using a rough cloth and non-neutral detergent such as<br />
alcohol for cleaning may result in scratching or discoloration.<br />
3. lf any abnormal behavior of the unit is found, please refer to trouble shooting guide of<br />
this manual. lf no relevant information is found, please press the [RESET] key on the<br />
front panel to resume factory default.<br />
4. lf you have parked the car in hot or cold weather for a long time, please wait until the<br />
temperature in the car becomes normal before operating the unit.<br />
5. Using in-car heater in low temperature environment may result in condensation inside the<br />
unit. DO NOT use the unit in this situation, eject the disc and wipe off the condensation<br />
on the disc. lf the unit still doesn't work after a few hours, please contact with after-sales<br />
service center.<br />
6. No fierce mechanical impact to the LCD monitor when it is in open position for preventing<br />
the damage to any mechanisms inside.<br />
7. To prevent damage to the screen, avoid touching it with sharp objects.<br />
8. The monitor employs auto motorizing mechanism, please don't push, pull, or swivel the<br />
monitor manually to prevent damage to the core mechanism.<br />
9. To provide a clear demonstration and an alternative for easy understanding to the<br />
operation of this unit, graphic illustrations are used. However, these illustrations may be<br />
different from the actual images displayed on the screen.<br />
10. During operating the unit, " " will display if the current operation is not available<br />
or illegal.<br />
11. Operate the unit correctly according to this manual to prevent unnecessary<br />
problems. The guarantee won't be valid if the problem is caused by<br />
inappropriate operation.<br />
DECLARATION<br />
This product incorporates copyright protection technology that is protected by U.S patents<br />
and other intellectual property rights. Use of this copyright protection technology must be<br />
authorized by Macrovision, and is intended for home and other limited viewing uses only<br />
unless otherwise authorized by Macrovision.<br />
Reverse engineering or disassembly is prohibited.<br />
5