MODEL N0: USER MANUAL - Zenec
MODEL N0: USER MANUAL - Zenec
MODEL N0: USER MANUAL - Zenec
Erfolgreiche ePaper selbst erstellen
Machen Sie aus Ihren PDF Publikationen ein blätterbares Flipbook mit unserer einzigartigen Google optimierten e-Paper Software.
ZE-NC514<br />
INSTALLATION AND UNINSTALLATION<br />
Dashboard<br />
Rubber Sheath<br />
Mounting Bracket<br />
Long Assemble Bar<br />
(Picture 2)<br />
4. lnsert the unit into the bracket, fasten the M4 x 6 screw to the fireproofing board available<br />
at the back of the dashboard, and use 4 pieces of M2 x 2 screw to lock the assemble<br />
bars and the mounting bracket in position.<br />
NOTE:<br />
■ According to the depth of the opening, use different length of assemblebar accordingly.<br />
If the opening is too shallow, the monitor may be extended out 10 mm from the<br />
dashboard.<br />
METHOD B<br />
Mounting Frame<br />
Dashboard<br />
1. Insert this unit directly to the opening of the dash board.<br />
2. Place M4 x 3, M5 x 5 cylindrical screw or M5 x 5 cone shaped screw through the holes<br />
of the mounting frame located inside the opening to holes of the unit and fasten the<br />
screws to left & right.<br />
43
Change language