MODEL N0: USER MANUAL - Zenec
MODEL N0: USER MANUAL - Zenec MODEL N0: USER MANUAL - Zenec
SETUP 3. Close the parental lock ■ Repeat the operation of the first step to enter a 6-digit password (old or new) and then confirm. ■ The parental lock is closed. ■ Load Factory To restore the default settings relating with DVD playback (e.g.: DVD Audio, DVD Subtitle), press the [RESET] option. HARDWARE ■ Camera ln Normal: Actual scenes shot by the camera display on the TFT monitor while reverse driving (just like what you are watching). Mirror: The mirror images of actual scenes display on the TFT monitor while reverse driving (just like observing things over the rearview mirror). ■ TFT Auto Open Auto: The TFT panel automatically opens when the unit is turned on. Manual: When the ignition is turned off, the TFT panel remains open if it was opened previously. Off: The TFT panel opens only by pressing OPEN button when the unit is turned on. ■ Video input NTSC: Set the color system of the TFT screen to NTSC. PAL: Set the color system of the TFT screen to PAL. AUTO: Set the color system of the TFT screen automatically by the unit according to the input video formats. ■ Parking On: Image displays only after your car has been parked. Off: Image displays at all times. P.VOL ■ P.VOL means Programmable Volume. You can balance the volume among different audio sources using this function. 34
ZE-NC514 SETUP ■ Source Select one playing source that you want to set relative volume. ■ Level You can set relative volume level from 0 to 6. METHOD OF CHANGING PASSWORT 1. Locate the cursor on the “Anti-PSW” option, press the numeric keys on the remote control or touch the “Anti-PSW” option directly to open the onscreen keypad. Touch the numeric buttons to enter the factory default code “012345” to deactivate the anti theft function. 2. Repeat the operation above to enter a new 6 digit password and confirm by pressing the enter button. Your new personal password becomes effective and the unit will be locked when disconnected from power. PLEASE NOTE: ■ Do use a code you can easily remember. Unlock the unit is not free of charge and can only be done by an authorized ZENEC service center. TS CAL ■ When the touch function is not sensitive or valid, you should calibrate the touch screen by this function. ■ Calibrate the touch screen just following the screen introductions after entering the TS CAL mode. 35
- Seite 1 und 2: MODEL N0: 1-DIN DVD-NAVICEIVER WITH
- Seite 3 und 4: ZE-NC514 USB MODE SELECT USB AS PLA
- Seite 5 und 6: ZE-NC514 PRECAUTIONS 1. Never disas
- Seite 7 und 8: ZE-NC514 BEFORE USING 10. [ ] Key:
- Seite 9 und 10: ZE-NC514 BEFORE USING NOTES FOR REM
- Seite 11 und 12: ZE-NC514 BASIC OPERATIONS DISPLAY S
- Seite 13 und 14: ZE-NC514 RADIO MODE MANUAL SAVE Whe
- Seite 15 und 16: ZE-NC514 RDS OPERATIONS PTY FUNCTIO
- Seite 17 und 18: ZE-NC514 DISC MODE ONSCREEN CONTROL
- Seite 19 und 20: ZE-NC514 DISC MODE REPEAT PLAYBACK
- Seite 21 und 22: ZE-NC514 DISC MODE DVD MENU AND TLT
- Seite 23 und 24: ZE-NC514 DISC MODE For VCD 1. Disc
- Seite 25 und 26: ZE-NC514 USB MODE CHANGE FOLDER ■
- Seite 27 und 28: ZE-NC514 IPOD MODE VIDEO PLAYBACK 1
- Seite 29 und 30: ZE-NC514 OTHER MODES AV-IN ■ Exte
- Seite 31 und 32: ZE-NC514 SETUP GENERAL ■ Clock mo
- Seite 33: ZE-NC514 SETUP You should set a new
- Seite 37 und 38: ZE-NC514 TROUBLESHOOTING ■ What a
- Seite 39 und 40: ZE-NC514 DEVICE CONNECTIONS NOTES O
- Seite 41 und 42: ZE-NC514 DEVICE CONNECTIONS PARKING
- Seite 43 und 44: ZE-NC514 INSTALLATION AND UNINSTALL
- Seite 45 und 46: ZE-NC514 SPECIFICATIONS General Ref
- Seite 47 und 48: ZE-NC514 APPENDIX REGION CODE Accor
- Seite 49 und 50: ZE-NC514 2 YEARS LIMITED WARRANTY D
- Seite 51 und 52: ZE-NC514 MODE USB SÉLECTIONNER L'U
- Seite 53 und 54: ZE-NC514 PRÉCAUTIONS 1. Ne jamais
- Seite 55 und 56: ZE-NC514 PANNEAU DE COMMANDES 10. T
- Seite 57 und 58: ZE-NC514 PANNEAU DE COMMANDES NOTES
- Seite 59 und 60: ZE-NC514 OPÉRATIONS DE BASE AFFICH
- Seite 61 und 62: ZE-NC514 MODE RADIO MÉMORISATION M
- Seite 63 und 64: ZE-NC514 RDS-FONCTION PTY ■ PTY e
- Seite 65 und 66: ZE-NC514 MODE DISQUE BOUTONS DE COM
- Seite 67 und 68: ZE-NC514 MODE DE DISQUE LECTURE RÉ
- Seite 69 und 70: ZE-NC514 MODE DE DISQUE MENU DVD ET
- Seite 71 und 72: ZE-NC514 MODE DE DISQUE POUR LE VCD
- Seite 73 und 74: ZE-NC514 MODE USB CHANGER DE DOSSIE
- Seite 75 und 76: ZE-NC514 MODE IPOD LECTURE VIDÉO (
- Seite 77 und 78: ZE-NC514 AUTRES MODES AV-IN ■ Vou
- Seite 79 und 80: ZE-NC514 RÉGLAGES GÉNÉRAL ■ Fo
- Seite 81 und 82: ZE-NC514 RÉGLAGES Choisissez un no
- Seite 83 und 84: ZE-NC514 RÉGLAGES ■ Source Séle
SETUP<br />
3. Close the parental lock<br />
■ Repeat the operation of the first step to enter a 6-digit password (old or new) and then<br />
confirm.<br />
■ The parental lock is closed.<br />
■ Load Factory<br />
To restore the default settings relating with DVD playback (e.g.: DVD Audio, DVD<br />
Subtitle), press the [RESET] option.<br />
HARDWARE<br />
■ Camera ln<br />
Normal: Actual scenes shot by the camera display on the TFT monitor while reverse<br />
driving (just like what you are watching).<br />
Mirror: The mirror images of actual scenes display on the TFT monitor while reverse<br />
driving (just like observing things over the rearview mirror).<br />
■ TFT Auto Open<br />
Auto: The TFT panel automatically opens when the unit is turned on.<br />
Manual: When the ignition is turned off, the TFT panel remains open if it was opened<br />
previously.<br />
Off: The TFT panel opens only by pressing OPEN button when the unit is turned on.<br />
■ Video input<br />
NTSC: Set the color system of the TFT screen to NTSC.<br />
PAL: Set the color system of the TFT screen to PAL.<br />
AUTO: Set the color system of the TFT screen automatically by the unit according to the<br />
input video formats.<br />
■ Parking<br />
On: Image displays only after your car has been parked.<br />
Off: Image displays at all times.<br />
P.VOL<br />
■ P.VOL means Programmable Volume.<br />
You can balance the volume among different audio sources using this function.<br />
34