MODEL N0: USER MANUAL - Zenec
MODEL N0: USER MANUAL - Zenec MODEL N0: USER MANUAL - Zenec
IPOD MODE SELECT IPOD AS PLAYING SOURCE ■ The unit will switch to iPod mode automatically when an iPod player is plugged into the unit. ■ To return to the iPod mode from any other sources, open the SOURCE MENU and then touch iPod. MUSIC PLAYBACK 1. Enter iPod music mode ■ Press the [TlTLE] key on the remote control or touch the music icon on the user interface. 2. Select one music file ■ Press the [Left]/[Right] key on the remote control. 3. Play back the music file ■ Press the [Down] key on the remote control or touch the [ ] button on the user interface. 4. Return to the previous menu ■ Press the [UP] key on the remote control or touch the button [MENU] on the user interface. NOTE: ■ In the Music mode, the buttons on the iPod are disabled. PHOTO PLAYBACK 1. Enter iPod photo mode ■ Press the [MENU] key on the remote control or touch the picture icon on the user interface. 2. Control photo files playback ■ Use the keys on the iPod to control playback. NOTES: ■ To exit PHOTO mode, press the [MENU] button on the iPod. ■ Pictures can be displayed on the screen just when the picture playback mode of iPod player is set to "slide show". 26
ZE-NC514 IPOD MODE VIDEO PLAYBACK 1. Enter iPod video mode ■ Press the [AUDIO] key on the remote control or touch the video icon on the user interface. 2. Control video files playback ■ Use the keys on your iPod player to control playback. NOTES: ■ To exit VIDEO mode, press the [MENU] button on the iPod. ■ To transmit the images (including videos and pictures) from your iPod to the TFT screen, you must set the following options through the iPod video settings menu: TV Out = On, TV Signal = NTSC. FAST PLAYBACK ■ To access fast forward or fast reverse playback, you should press and hold the [Left]/[Right] key on the remote control or the []/[] button on the user interface for 1 second and continue to hold the corresponding key. To resume normal play, release them. DIRECT SEARCH ■ To select a file directly, touch the numeric button on the user interface to open the direct entry menu. Enter the desired file using the number pad of this menu. Touch the [Enter] button to confirm. To exit this menu, touch the [Exit] button. ■ To clear the numbers you have entered, touch the [Clear] button. ■ You can also use the numeric keys on the remote control to select files directly. 27
- Seite 1 und 2: MODEL N0: 1-DIN DVD-NAVICEIVER WITH
- Seite 3 und 4: ZE-NC514 USB MODE SELECT USB AS PLA
- Seite 5 und 6: ZE-NC514 PRECAUTIONS 1. Never disas
- Seite 7 und 8: ZE-NC514 BEFORE USING 10. [ ] Key:
- Seite 9 und 10: ZE-NC514 BEFORE USING NOTES FOR REM
- Seite 11 und 12: ZE-NC514 BASIC OPERATIONS DISPLAY S
- Seite 13 und 14: ZE-NC514 RADIO MODE MANUAL SAVE Whe
- Seite 15 und 16: ZE-NC514 RDS OPERATIONS PTY FUNCTIO
- Seite 17 und 18: ZE-NC514 DISC MODE ONSCREEN CONTROL
- Seite 19 und 20: ZE-NC514 DISC MODE REPEAT PLAYBACK
- Seite 21 und 22: ZE-NC514 DISC MODE DVD MENU AND TLT
- Seite 23 und 24: ZE-NC514 DISC MODE For VCD 1. Disc
- Seite 25: ZE-NC514 USB MODE CHANGE FOLDER ■
- Seite 29 und 30: ZE-NC514 OTHER MODES AV-IN ■ Exte
- Seite 31 und 32: ZE-NC514 SETUP GENERAL ■ Clock mo
- Seite 33 und 34: ZE-NC514 SETUP You should set a new
- Seite 35 und 36: ZE-NC514 SETUP ■ Source Select on
- Seite 37 und 38: ZE-NC514 TROUBLESHOOTING ■ What a
- Seite 39 und 40: ZE-NC514 DEVICE CONNECTIONS NOTES O
- Seite 41 und 42: ZE-NC514 DEVICE CONNECTIONS PARKING
- Seite 43 und 44: ZE-NC514 INSTALLATION AND UNINSTALL
- Seite 45 und 46: ZE-NC514 SPECIFICATIONS General Ref
- Seite 47 und 48: ZE-NC514 APPENDIX REGION CODE Accor
- Seite 49 und 50: ZE-NC514 2 YEARS LIMITED WARRANTY D
- Seite 51 und 52: ZE-NC514 MODE USB SÉLECTIONNER L'U
- Seite 53 und 54: ZE-NC514 PRÉCAUTIONS 1. Ne jamais
- Seite 55 und 56: ZE-NC514 PANNEAU DE COMMANDES 10. T
- Seite 57 und 58: ZE-NC514 PANNEAU DE COMMANDES NOTES
- Seite 59 und 60: ZE-NC514 OPÉRATIONS DE BASE AFFICH
- Seite 61 und 62: ZE-NC514 MODE RADIO MÉMORISATION M
- Seite 63 und 64: ZE-NC514 RDS-FONCTION PTY ■ PTY e
- Seite 65 und 66: ZE-NC514 MODE DISQUE BOUTONS DE COM
- Seite 67 und 68: ZE-NC514 MODE DE DISQUE LECTURE RÉ
- Seite 69 und 70: ZE-NC514 MODE DE DISQUE MENU DVD ET
- Seite 71 und 72: ZE-NC514 MODE DE DISQUE POUR LE VCD
- Seite 73 und 74: ZE-NC514 MODE USB CHANGER DE DOSSIE
- Seite 75 und 76: ZE-NC514 MODE IPOD LECTURE VIDÉO (
IPOD MODE<br />
SELECT IPOD AS PLAYING SOURCE<br />
■ The unit will switch to iPod mode automatically when an iPod player is plugged into the<br />
unit.<br />
■ To return to the iPod mode from any other sources, open the SOURCE MENU and then<br />
touch iPod.<br />
MUSIC PLAYBACK<br />
1. Enter iPod music mode<br />
■ Press the [TlTLE] key on the remote control or touch the music icon on the user interface.<br />
2. Select one music file<br />
■ Press the [Left]/[Right] key on the remote control.<br />
3. Play back the music file<br />
■ Press the [Down] key on the remote control or touch the [ ] button on the user interface.<br />
4. Return to the previous menu<br />
■ Press the [UP] key on the remote control or touch the button [MENU] on the user<br />
interface.<br />
NOTE:<br />
■ In the Music mode, the buttons on the iPod are disabled.<br />
PHOTO PLAYBACK<br />
1. Enter iPod photo mode<br />
■ Press the [MENU] key on the remote control or touch the picture icon on the user<br />
interface.<br />
2. Control photo files playback<br />
■ Use the keys on the iPod to control playback.<br />
NOTES:<br />
■ To exit PHOTO mode, press the [MENU] button on the iPod.<br />
■ Pictures can be displayed on the screen just when the picture playback mode of iPod<br />
player is set to "slide show".<br />
26
Change language