ZE-MC170
1. Accessing the audio control menu . . .Press the POWER/VOL button on the front panel once or press the SEL button on the remote control to display the “AUDIO” menu. 2. Selecting an audio feature for adjustment Press the [5] or [6] button on the remote control or press the POWER/VOL button on the front panel once to select an audio feature to be adjusted. 3. Adjusting an audio feature . . .Press the [3] or [4] button on the remote control or rotate the POWER/VOL clockwise/anticlockwise to adjust the selected feature to the desired setting. 4. Audio adjustments: Audio function EQ Adjustable range User Flat Jazz Pop Classical Rock BASS –7 to +7 TREBLE –7 to +7 FADE –9 to +9 BAL –9 to +9 SUB –7 to +7 LOUD off, Lever 1–4 NOTE: ■ The bass and treble levels are only adjustable when EQ is set to “User” mode. ■ The loud function compensates for deficiencies in sound ranges at low levels. Loudness levels range from 1–4 or “off”. When the loud function is on, LOUD is displayed on the screen. ■ To exit the audio control menu. Stop making adjustments for a few seconds to exit the audio control menu. 64 Downloaded from www.Manualslib.com manuals search engine
ENGLISH SYSTEM RESET ■ To correct a system halt or an unwanted operation, use the tip of a pen to press the RESET button located on the front bottom-right corner of the unit. After a system reset, the unit restores all factory default settings. RESET button MUTE The volume will be muted when the following cases occur: ■ Automatic: If the “MUTE” wire is connected, audio output mutes when a telephone call is received by the car phone or when verbal navigation is performed. ■ Manual: Press the MUTE button [ ] on the front panel or the MUTE button [ ] on the remote control to mute the volume of the unit. NOTE: ■ Press the MUTE button [ ] again to restore the volume. “MUTE” is displayed on the LCD monitor. ■ Adjusting the volume or using any of the audio set-up features cancels the mute function. 65 Downloaded from www.Manualslib.com manuals search engine
- Seite 13 und 14: Remote Control 3. DIE FERNBEDIENUNG
- Seite 15 und 16: DEUTSCH 21. NEXT-Taste ■ Drücken
- Seite 17 und 18: DEUTSCH BILDSCHIRMEINSTELLUNGEN ■
- Seite 19 und 20: DEUTSCH 3. Verändern des Wertes ei
- Seite 21 und 22: DEUTSCH 6. SYSTEMEINSTELLUNGEN HAUP
- Seite 23 und 24: DEUTSCH Einstellung Einstellbereich
- Seite 25 und 26: DEUTSCH Einstellung Option Funktion
- Seite 27 und 28: DEUTSCH 15. Berühren Sie das Icon
- Seite 29 und 30: DEUTSCH 8. DVD-WIEDERGABE BITTE BE
- Seite 31 und 32: DEUTSCH Zeitlupe ■ Drücken Sie d
- Seite 33 und 34: DEUTSCH Track Search Time Track ---
- Seite 35 und 36: DEUTSCH Wiedergabeinformationen VCD
- Seite 37 und 38: DEUTSCH 9. DVD-SETUP ■ Folgende M
- Seite 39 und 40: DEUTSCH VIDEOEINSTELLUNGEN Einstell
- Seite 41 und 42: DEUTSCH 10. CD/MP3/WMA/JPEG-WIEDERG
- Seite 43 und 44: DEUTSCH WIEDERGABE VON MP3/WMA DISC
- Seite 45 und 46: DEUTSCH 11. FEHLERSUCHE GENERELLE P
- Seite 47 und 48: DEUTSCH FEHLERMELDUNGEN: Problem Ur
- Seite 49 und 50: DEUTSCH AM tuner section Tuning ran
- Seite 51 und 52: ENGLISH Tuner Operation . . . . . .
- Seite 53 und 54: ENGLISH 9. The monitor employs an a
- Seite 55 und 56: ENGLISH 01 POWER OFF/VOL Rotary enc
- Seite 57 und 58: ENGLISH The key areas of touch scre
- Seite 59 und 60: ENGLISH 7. VOL down ■ Decrease vo
- Seite 61 und 62: ENGLISH USING THE TFT MONITOR Open/
- Seite 63: ENGLISH The Basic Operation Power O
- Seite 67 und 68: ENGLISH Screen Setting Accessing th
- Seite 69 und 70: ENGLISH Setting Options Function Ra
- Seite 71 und 72: ENGLISH 15. Touch to change among t
- Seite 73 und 74: ENGLISH Using the Touch-Screen Cont
- Seite 75 und 76: ENGLISH Fast Forward/Fast Reverse
- Seite 77 und 78: ENGLISH Zooming ■ Press the ZOOM
- Seite 79 und 80: ENGLISH General Disc Information Sy
- Seite 81 und 82: ENGLISH DVD Setup Menu In “DVD se
- Seite 83 und 84: ENGLISH VIDEO Menu VIDEO menu featu
- Seite 85 und 86: ENGLISH CD/MP3/WMA/JPEG Operation I
- Seite 87 und 88: ENGLISH JPEG Disks 1 2 3 1. Stop pl
- Seite 89 und 90: ENGLISH TUNER Problem Cause Correct
- Seite 91 und 92: ENGLISH Specifications CEA power ra
- Seite 93 und 94: ENGLISH 93 Downloaded from www.Manu
- Seite 95 und 96: WARRANTY/GARANTIE ZENEC Model: ZE-M
1. Accessing the audio control menu<br />
. . .Press the POWER/VOL button on the front panel once or press the SEL button on<br />
the remote control to display the “AUDIO” menu.<br />
2. Selecting an audio feature for adjustment<br />
Press the [5] or [6] button on the remote control or press the POWER/VOL button<br />
on the front panel once to select an audio feature to be adjusted.<br />
3. Adjusting an audio feature<br />
. . .Press the [3] or [4] button on the remote control or rotate the POWER/VOL clockwise/anticlockwise<br />
to adjust the selected feature to the desired setting.<br />
4. Audio adjustments:<br />
Audio function<br />
EQ<br />
Adjustable range<br />
User<br />
Flat<br />
Jazz<br />
Pop<br />
Classical<br />
Rock<br />
BASS –7 to +7<br />
TREBLE –7 to +7<br />
FADE –9 to +9<br />
BAL –9 to +9<br />
SUB –7 to +7<br />
LOUD off, Lever 1–4<br />
NOTE:<br />
■ The bass and treble levels are only adjustable when EQ is set to “User” mode.<br />
■ The loud function compensates for deficiencies in sound ranges at low levels. Loudness<br />
levels range from 1–4 or “off”. When the loud function is on, LOUD is displayed on the<br />
screen.<br />
■ To exit the audio control menu. Stop making adjustments for a few seconds to exit the<br />
audio control menu.<br />
64<br />
Downloaded from www.Manualslib.com manuals search engine