ZE-MC170

ENGLISH
USING THE TFT MONITOR
Open/Close TFT Monitor
Press the [ ] button on the front panel or press the [ ] button on the remote control to
open/close the monitor.
TFT Monitor Auto Open
■ If “TFT Auto Open” is “on” when the unit is turned on, the monitor automatically moves
to the last viewing position.
■ If “TFT Auto Open” is ”off” when the unit is turned on, press the [ ] button on the front
panel or press the [ ] button on the remote control to move the monitor into the desired
viewing position.
Monitor Tilt Angle Adjustment
■ The monitor angle can be adjusted for optimum viewing using one of the following
methods:
■ Press the [5] or [6] button on the front panel of the unit to adjust the tilt angle of the
screen one step at a time.
■ Press and hold the [5] or [6] button to continuously adjust the tilt angle.
Rear Camera Mode
■ When the vehicle is put in reverse gear, and an optional rear view camera is connected to
the ZE-MC170, the TFT monitor will automatically switch to the camera input source.
Image Setting
Video Output Format
■ The table below shows the video output format for each playing source.
Playing source
FM/AM Tuner
DVD
AUX IN
CAMERA
Video output format
RGB mode
RGB mode
CVBS mode
CVBS mode
*CVBS – Composite Video Baseband Signal
61
Downloaded from www.Manualslib.com manuals search engine