Plastizität und Bruchmechanik - Technische Fakultät

Plastizität und Bruchmechanik WS 2011/12
Mahnken, R.; Stein, E.: “The parameter identification of viscoplastic models via finiteelement-methods
and gradient methods”, Model. Simulation Mat. Sci. Eng. 2 (1994),
597-616.
McClintock, F.A.: “A criterion for ductile fracture by the growth of holes”, Trans. ASME, J.
Appl. Mech. 35 (1968), 363-371.
Needleman, A.; Tvergaard, V.: “An analysis of ductile rupture in notched bars”, J. Mech.
Phys. Solids 32 (1984), 461-490.
Needleman, A.; Tvergaard, V.: An analysis of ductile rupture at a crack tip, J. Mech. Phys.
Solids 35 (1987), 151-183.
Nemat-Nasser, S.; Hori, M.: Micromechanics - overall properties of heterogeneous materials,
North-Holland, Amsterdam, 1993.
Rice, J.R.; Tracey, D.M.: “On the ductile enlargement of voids in triaxial stress fields”, J.
Mech. Phys. Solids 17 (1969), 201-217.
Ritchie, R.O.; Knott, J.F.; Rice, J.R.: „On the relationship between critical tensile stress and
fracture toughness in mild steel“, J. Mech. Phys. Solids 21 (1973), 395-410.
Rousselier, G.: “Ductile fracture models and their potential in local approach of fracture”,
Nucl. Engng. and Des. 105 (1987), 97-111.
Rousselier, G.: “The Rousselier model for porous metal plasticity and ductile fracture”, in:
Handbook of Materials Behavior (J. Lemaitre, Hrsg.), Vol. II, Failures of Materials,
Academic Press, London, 2001, 436-445.
Schwefel, H.P.: Evolution and Optimum Seeking, Wiley-Interscience Publ., New York, 1995.
Siegmund, T.; Brocks, W.: "Local fracture criteria: Lengthscales and applications", Journal de
Physique IV, Vol. 8 (1998), 349-356.
Sun, D.-Z.; Hönig, A.: “Significance of the characteristic length for micromechanical
modelling of ductile fracture”, in Proc. 3 rd Int. Conf. on Localized Damage (Hrsg. M.H.
Aliabadi, A. Carpinteri, S. Kalisky, D.J. Cartwright), Comp. Mechanics Publication,
Southampton, 1994, 287-296.
Tvergaard, V.: “On localization in ductile materials containing spherical voids”, Int. J.
Fracture 18 (1982), 237-252
Tvergaard, V.; Needleman, A.: “Analysis of the cup-cone fracture in a round tensile bar”,
Acta metall. 32 (1984), 157-169.
Tvergaard, V.; Needleman, A.: “The modified Gurson model”, in: Handbook of Materials
Behavior (J. Lemaitre, Hrsg.), Vol. II, Failures of Materials, Academic Press, London,
2001, 430-435.
Weibull, W.: “A statistical distribution function if wide applicability”, Annual Meeting of
The American Society of Mechanical Engineers, Atlantic City, NJ, Nov. 25-30, 1951
Brocks, 13.01.2012, Schaedigung, - 13 -