Application Manual Power Semiconductors - Deutsche ... - Semikron

Literaturverzeichnis
[38] Klotz, F.: „Leitungsgebundene elektrische Störemissionen von Leistungshalbleitertopologien“,
Diss. TU Ilmenau 1997; Verlag ISLE, ISBN 3-932633-00-8
[39] Zeller, H.: „High power Components“, PCIM Europe 1998, Conference Proceedings
[40] Setz, T.; Lüscher, M.: Application note „Applying IGCT”, www.abb.com/semiconductors
[41] Mitsubishi Datasheet MG400V1US51A, http://www.mitsubishichips.com/Global/
[42] Wolfgang, E.: ECPE Workshop „Semiconductor Robustness -What Kills Power devices“,
Munich, 06/2009
[43] ZVEI, Handbook for Robustness Validation of Semiconductor Devices in Automotive Applications,
http://www.zvei.org/
[44] Lang, F.; Scheuermann, U.: „Reliability of spring pressure contacts under environmental
stress”, European Symposium on Reliability of Electron Devices, Failure Physics and Analysis
2007, Proceedings Microelectronics Reliability
[45] Slade, P. G.: „Electrical contacts: principles and application“, Marcel Dekker, Inc. 1999, pp.
343-345
[46] Lang, F.; Scheuermann, U.: „Spring Pressure Contacts for Flexible Reliable Interconnections
in Power Modules“, PCIM China 2009, Conference Proceedings
[47] Lutz, J. u.a.: „Power cycling induced failure mechanisms in the viewpoint of rough temperature
environment“, CIPS 2008, Conference Proceedings
[48] Amro; Lutz; Lindemann: „Power Cycling with High Temperature Swing of Discrete Components
based on Different Technologies“, Power Electronics Specialists Conference 2004
(PESC04), Aachen, Conference Proceedings
[49] Ramminger, S.; Seliger, N.; Wachutka, G.: „Reliability Model for Al Wire Bonds subjected
to Heel Crack Failures“, Microelectronics Reliability 40 (2000)
[50] Eicher, S.; Rahimo, M.; Tsyplakov, E.; Schneider, D.; Kopta, A.; Schlapbach, U.; Carroll,
E.: „4.5kV Press Pack IGBT Designed for Ruggedness and Reliability“, IAS Annual Meeting
2004, Seattle, Conference Proceedings
[51] Hamidi, A.; Kaufmann, S.; Herr, E.: „Increased Lifetime of Wire Bond Connections for IGBT
Power Modules“, IEEE Applied Power Electronic Conference and Exhibition (APEC), Anaheim,
2001, Conference Proceedings
[52] Held, M.; Jacob, P.; Nicoletti, G.; Scacco, P.; Poech, M.H.: „Fast Power Cycling Test for
IGBT Modules in Traction Application“, Power Electronics and Drive Systems 1997, Conference
Proceedings
[53] Bayerer, R.; Herrmann, T.; Licht, T.; Lutz, J.; Feller, M.: „Model for Power Cycling lifetime of
IGBT Modules – various factors influencing lifetime“, CIPS 2008, Conference Proceedings
[54] Pfeiffer, W. (Hrsg.): „Isolationskoordination in Niederspannungsanlagen“, VDE 0110, expert-
Verlag Böblingen, 1990
[55] Srajber, D. Lukasch, W.: „The calculation of the power dissipation for the IGBT and the
inverse diode in circuits with sinusoidal output voltage“, electronica‘92, Conference Proceedings
[56] „Simulation tool R-theta“, www.r-theta.com
[57] Seri Lee: Electronics Cooling Magazine, Aavid Thermal Technologies
[58] Lytron: „Die besten Wärmeübertragungsflüssigkeiten für Flüssigkeitskühlung“, http://www.
lytron.de/tools-technical/notes/
[59] Eisele, R.; Olesen, K.K.; Osterwald, F.: „ShowerPower — Brausestrahl versus traditionelle
Flüssigkeitskühlung“, Elektronik Praxis 10/2008
441