LS 50-L FLEX

Weitere Magazine

Empfehlungen

Info

Instruction Manual Punching Tool LS 50-L FLEX authorised copy 4.4 Service and maintenance instruction 1. The electric-hydraulic punching unit have to be cleaned and dried after each use before being put into the transportation case. 2. In order to guaranty a proper function of the machine the punching tool should be returned to the manufacturer or one of our Authorized Service Centers (ASCs) after the red LED indicates Service (after 10.000 punching cycles) or once every year whatever occures fi rst. 3. The pivot and the moveable parts at the punching head must be oiled regularly in small amounts. For every day service the tool has to be cleaned and dried after each use. The battery cartridge and the charging unit have to be protected against humidity and dust. The electric-hydraulic unit is equipped with a controller enabling the user to see when the next service is due by fl ashing for 20 sec. at the end of a working cycle. The unit must be sent to an authorized service center (ASC) after reaching 10.000 cycles or at the latest after one year. During this service worn out parts will be exchanged, safety relevant components checked and possibly replaced pre cautiously. This provision serves your safety and avoids failures through fatigue. Attention Maintain power tools thoroughly. Check for functionality or jamming of moving parts, breakage of parts and any other condition that may affect the power tools operation. Attention Do not damage the seals of the tool. If the seal is damaged the warranty claim is void. Attention Have damaged parts repaired by a qualified expert or by a Klauke ASC before use. 4.5 Troubleshooting a.) Constant flashing/indicating of the red LED (pic 1.3). see table 1. If the failure can not be solved through the action recommended in table 1 return the tool to the nearest service center (ASC). b.) The tool loses oil. Return the unit to the manufacturer. Do not open it and damage the seal of the tool. HE.13577_D © 07/2010 GB 8
Instruction Manual Punching Tool LS 50-L FLEX 5. Technical Data authorised copy Weight of the tool (incl. battery): approx. 2,21 kg Punching force: approx. 60 kN Driving motor: direct-current permanent fi eld motor Motor voltage: 18 V DC Battery capacity: 3 Ah (RAL2/BL1830) or 1,3 Ah (RAL1/BL1815) Charging time: 22 min. (RAL2/BL1830) or 15 min. (RAL1/BL1815) Punching time: 5 s at ∅ 22,5 mm, 3 mm St37 / 6 s at ∅ 61,5 mm, 3 mm St37 Punching performance: approx. 190 punches/battery at ∅ 22,5 mm and 3 mm sheet thickness or approx. 280 punches/battery at ∅ 22,5 mm and 2,5 mm sheet thickness Hydraulic oil: Rivolta S.B.H. 11 Environmental temperature: RAL2: -12°C bis +40°C / RAL1: -10°C bis +40°C Sound level: < 70 dB (A) in 1m distance Vibrations: < 2,5 m/s² Dimension: see pic. 2 HE.13577_D © 07/2010 GB 9
Seite 1 und 2: Verbindungen mit System The Power o
Seite 3 und 4: Bedienungsanleitung/ Instruction Ma
Seite 19 und 20: Bedienungsanleitung Stanzwerkzeug L
Seite 29 und 30: Instruction Manual Punching Tool LS
Seite 35: Instruction Manual Punching Tool LS
Seite 39 und 40: Konformitätserklärung Typ LS 50-L

LS 50-L FLEX

Erfolgreiche ePaper selbst erstellen

Template löschen?

Als Template speichern?