Bedienungsanleitungen

Weitere Magazine

Empfehlungen

Info

Instruction Manual LS 60 Plus page 16 ________________________________________________________________________________________________________________ 1. Introduction Attention Before starting to use the tool please read the instruction manual carefully. • Use this tool exclusively for its determined use. • Punching holes with the help of this tool must only be performed by specially trained personnel. The minimum age is 16 years. • This instruction manual has to be carried along during the entire life span of that tool. • The operator has - to guaranty the availability of the instruction manual for the user and - to make sure, that the user has read and understood the instruction manual. 2. Labels On the labels fixed on the housing of the tool you’ll find the type specification, name of the manufacturer and the company logo. On the opposite side of the housing you’ll find a label with a brief presentation of the scope of manageable hole diameters in metal sheets made of mild steel and stainless steel and the punching force. The serial number is located on the hydraulic cylinder. On the punching head you’ll find a warning against possible injuries during the punching process. 3. Warranty If correct operation is guaranteed and regular service is provided our warranty is 12 months from the time of delivery.
Instruction Manual LS 60 Plus page 17 ________________________________________________________________________________________________________________ 4. Description of the electric-hydraulic punching unit 4.1. Description of the components The electric-hydraulic punching unit type LS 60 PLUS is a hand held tool and consists of the following components: Table 1 (see picture 1) Pos.-No. Description Function Reference 1 Trigger Button to initiate the punching process pp 2 Retract button Button to retract the ram by a single touch pp 3 Punching head Pressure ring with reception for draw stud, pp die and punch 4 Fastening ring Ring for transportation and safety device for pp the unit 5 Lid Detachable plastic lid fixed on the housing p 6 Light diode Indicator for tool functions and battery pp display charge control 7 Battery cartridge Rechargeable 12V 2,6Ah NiMH battery pp (RA4) 8 - - - 9 Hand guard Removable guard to protect the operating p hand and the trigger to avoid unintended operations 10 Knockout punch Interchangeable punching dies pp 4.2. Description of the operating functions The punching procedure is initiated by actuating the trigger (Pos.-No. 1). The electric hydraulic punching unit type LS 60 PLUS is equipped with a special circuit board which automatically stops the punching procedure at the end of an punching cycle. The trigger must be actuated continuously during the punching procedure. The unit is supplied with a special brake which stops the forward motion of the piston after having released the trigger. Push retract button (Pos.-No. 2) once to return the piston into starting position. For more information on the special features of the circuit board please see chapter 4.4. 4.3. Description of the punching processes The punching process is defined by the penetration of the punch into the die. The material being punched is between the die and the punch. To initiate the punching process it is mandatory to screw the punch up to the sheet until they contact each other. This claim derives from the integrated microprocessor which by this guaranties that the entire stroke is available for the punching process. If the distance between the punch and the sheet is too far the tool will automatically stop. After actuating the trigger the punch will be drawn into the sheet and the tool will simultaneously move away from the sheet up to the stroke length of 22 mm. This movement can be visualised by the drive-out of the pressure ring. The punching cycle is terminated when the punch has completely penetrated the die. Afterwards the punch can be pulled through and away from the sheet.
Seite 1 und 2: Greenlee Textron/Subsidiary of Text
Seite 3 und 4: Bedienungsanleitung LS 60 Plus Seit
Seite 15: Instruction Manual for the electric
Seite 19 und 20: Instruction Manual LS 60 Plus page
Seite 25 und 26: Service LS 60 plus Seite/page 25 __
Seite 27: Greenlee Textron Subsidiary of Text

Bedienungsanleitungen

Sie wollen auch ein ePaper? Erhöhen Sie die Reichweite Ihrer Titel.

Template löschen?

Als Template speichern?