X-POWER - kinzo

3 Layout (Fig. 1)
A
1 Sanding/grinding disk
2 Handle
3 Locking knob
4 Control switch
5 Dust bag connector
6 Dust bag
7 Setting the rotational speed
8 Additional handle
Fig. 1
4 Technical data
Voltage
230-240 Volt ~ 50 Hz
Power input
380 W
Grinding/sanding area
Ø 120 mm
Abrasive paper size
Ø 125 mm
Vibrations per minute 6000-11,000
Totally insulated
II/
Weight:
2.2 kg
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
LpA sound pressure level
KpAuncertainty
LWA sound power level
KWAuncertainty
80,7 dB(A)
3 dB
91,7 dB(A)
3 dB
Wear ear-muffs.
The impact of noise can cause damage to hearing. Total vibration values (vector sum of three directions)
determined in accordance with EN 60745.
Additional handle
Vibration emission value ah =
K uncertainty =
10,378 m/s2
1,5 m/s2
Important!
The vibration value changes according to the area of application of the electric tool and may exceed the
specified value in exceptional circumstances.
5 Before starting the equipment
Before you connect the equipment to the mains supply
make sure that the data on the rating plate are
identical to the mains data. Always pull the power
plug before making adjustments to the equipment.
Fig. 2
5.1 Fitting the dust bag (Fig. 2)
Place the dust bag (6) on the dust bag connector (5)
and secure it by turning it. The dust is extracted directly
through the grinding/sanding paper and the
grinding/sanding disk and into the dust bag.
5
71792 manual 230V 2.indd 5 14-01-11 14:44