Angewandte Regelung und Optimierung in der ... - uni-stuttgart

Literature
• M.Paulonis and J.Cox. A practical approach for large-scale controller performance
assessment, diagnosis, and improvement. Journal of Process Control 13 (2003)
155–168.
• A.Horch, Condition Monitoring of Control Loops, PhD Thesis, Royal Institute of
Technology, Stockholm, Sweden, 2000.
• Harris, T.J. (1989). Assessment of control loop performance. Canadian Journal of
Chem. Eng., 67(10), 856-861.
• N.Thornhill, T. Hägglund, Detection and diagnosis of oscillation in control loops,
Control Eng Pract, 1997, Vol:5, Pages:1343-1354.
• M.Jelali, B.Huang. Detection and Diagnosis of Stiction in Control Loops: State of the
Art and Advanced Methods. In Springer Series Advances in Industrial Control,
Springer 2009.
• A. Ordys, D.Uduehi and M. Johnson: Process Control Performance Assessment:
From Theory to Implementation (Advances in Industrial Control), Springer 2007.
• Swanda, A.P. and D.E. Seborg (1999). Controller performance assessment based
on setpoint response data. In: Proceedings of the American Control Conference,
3863-3867.
• Qin, S.J. (1998). Control performance monitoring, a review and assessment.
Computers and Chemical Engineering 23, 173-186.
• T.Hägglund (1997). Stiction compensation in control valves. ECC 1997.
• D. B. Ender. “Process control performance: Not as good as you think.” Control
Engineering, 40:10, pp. 180–190, 1993.
© A.Horch
WS 2011/12 | Slide 25