28.02.2014 Aufrufe

5 - ATS

5 - ATS

5 - ATS

MEHR ANZEIGEN
WENIGER ANZEIGEN

Sie wollen auch ein ePaper? Erhöhen Sie die Reichweite Ihrer Titel.

YUMPU macht aus Druck-PDFs automatisch weboptimierte ePaper, die Google liebt.

<strong>ATS</strong> – Motorsport for more than 40 years<br />

The high-tech brand <strong>ATS</strong> is an international leading alloy wheel brand for passenger cars and sport-utility vehicles. The long-standing German<br />

company takes its roots from its former Formula 1 activities and achieved international prominence. <strong>ATS</strong> is a supplier of high-tech wheels for<br />

professional motorsport and has been successfully involved for many years in numerous races, such as the <strong>ATS</strong> Formula 3 CUP, the FIA F3<br />

European Championship, the VW Scirocco Cup, and the VLN Endurance Racing Championship Nürburgring. <strong>ATS</strong> is expanding further its<br />

leading role in weight-optimized high-tech wheels thanks to its own forged wheel production which was established in 2011 in Germany.<br />

ECE<br />

<strong>ATS</strong> alloy wheels with ECE-approved label (Economic Commission for Europe) are homologated according to the<br />

European ECE Regulation 124.<br />

• International: These wheels can be used in Europe and many other countries without any additional approval<br />

• Cost savings: No special entry in the vehicle documents is required<br />

• Useful: Standard fi ttings can be used further<br />

TPMS<br />

or TPMS-sensor<br />

<strong>ATS</strong> alloy wheels are already designed for tyre pressure monitoring systems (TPMS). This system is used to<br />

monitor the tyre pressure using a sensor built in rim / valve (direct system), thus becoming an important safety-related<br />

component. The optimal tyre pressure also saves fuel. TPMS is mandatory since 01.11.2012 for newly homologated<br />

car models up to a maximum weight of 3.5 tonnes according to ECE regulation R64, and it will become mandatory for<br />

all newly registered vehicles as from 01.11.2014.<br />

• Accessories sensors: The operation of the TPMS is available for vehicles that are standard or optionally fitted<br />

with accessories sensors of HUF / BERU or ALLIGATOR.<br />

• Original sensors: The latest constructively adapted <strong>ATS</strong> alloy wheels also enable the operation of the TPMS<br />

sensors with original sensors of respective car manufacturers.<br />

All <strong>ATS</strong> wheels in the winter<br />

program 2013/2014<br />

Original sensor HUF / BERU ALLIGATOR<br />

ü<br />

(HUF / BERU)<br />

ü ü<br />

(not RADIAL+ 9x19)<br />

<strong>ATS</strong> RACELIGHT<br />

(for Audi, BMW, Mercedes, Porsche)<br />

ü ü ü<br />

GTR 19“ (for Porsche) ü ü ü<br />

RADIAL+ (for BMW) ü ü ü<br />

(not RADIAL+ 9x19)<br />

EH2+<br />

<strong>ATS</strong> alloy wheels with this designation are specifically designed for RunFlat tyres. Tyres with emergency running<br />

properties (RunFlat) are strengthened by reinforced sidewalls. The two extended humps (EH) on the rim bed prevent<br />

a tyre slipping in the case of a sudden loss of tyre pressure. In order to ensure emergency running properties RunFlat<br />

tyres must be combined with EH2 / EH2+ rims.<br />

Below you fi nd some references and information to facilitate the work with our application list.<br />

1 2 3 4 5 6<br />

7 8<br />

Fzg.-Modell, Typ; EWG-Nr.<br />

Car type<br />

LZ/LK<br />

pcd<br />

Nb.<br />

Radgröße<br />

Wheel Size<br />

ET<br />

Offset<br />

Design<br />

Artikelnummer<br />

Part number<br />

Lamborghini<br />

Bild<br />

Picture<br />

Bereifungen<br />

Tyre sizes<br />

Aufl agen<br />

Notes<br />

Anbauset<br />

Fixing set<br />

Freigabe<br />

Release<br />

Gallardo<br />

Typ L140<br />

e3*2001/116*0152*..<br />

5/112 57,1 8,5 x 19<br />

11,0 x 19<br />

38<br />

50<br />

Racelight<br />

Racelight<br />

RL 859.38.Y7<br />

RL 1109.50.Y7<br />

1 / 2<br />

1 / 2<br />

235/35R19 (VA)<br />

295/30R19 (HA)<br />

A<br />

A<br />

MP 272<br />

Festigkeit<br />

1. Here you will fi nd the car brand and type<br />

2. Possible wheel size for the desired vehicle type<br />

3. Rim Design<br />

4. Article number for order<br />

5. Picture number corresponding to design (see rim overview)<br />

6. Information about approved wheel sizes for the desired<br />

design and potential TÜV requirements<br />

7. Necessary fi tting kit<br />

8. The approval of „ABE“ means that the vehicle does not<br />

require any other modifi cations (obligatory as per TÜV<br />

certificates).<br />

4

Hurra! Ihre Datei wurde hochgeladen und ist bereit für die Veröffentlichung.

Erfolgreich gespeichert!

Leider ist etwas schief gelaufen!