Download (9Mb) - tuprints

[93] L. Bo, W. Qingwei, and C. Yunyong. Cfd investigation on circumferential grooves casing
treatment of a transonic compressor. Proceedings of International Symposium on Air
Breathing Engines, (Paper number 2009-1185), 2009.
[94] H. Mohtar, P. Chesse, D. Chalet, and A. Yammine. Effect of casing treatment and variable
axial guide vanes on a turbocharger compressor performance. Proceedings of ASME Turbo
Expo, (Paper number GT-2009-59190), 2009.
[95] T. Wang, W. Xu, C. Gu, and J. Xiao. A new type of self-adaptive casing treatment for a
centrifugal compressor. Proceedings of ASME Turbo Expo, (Paper number GT-2010-23457),
2010.
[96] M. Yang, R. Martinez-Botas, Y. Zhang, X. Zheng, Z. Li, T. Bamba, and H. Tamaki. Investigation
of self-recycling-casing-treatment (srct) influence on stability of high pressure ratio
centrifugal compressor with a volute. Proceedings of ASME Turbo Expo, (Paper number
GT-2011-45065), 2011.
[97] Y. Ma, G. Xi, and G. Wu. Numerical investigation of different casing treatments on performance
of a high speed centrifugal compressor stage. Proceedings of ASME Turbo Expo,
(Paper number GT-2011-46015), 2011.
[98] Y. Ito, T. Watanabe, and T. Himemo. Effect of endwall contouring on flow instability of
transonic compressor. International Journal of Gas Turbine, Propulsion and Power Systems,
2(Paper number 1), 2009.
[99] M. Hathaway. Passive endwall treatments for enhancing stability. Technical Report ARL-
TR-3878, NASA, 2007.
[100] I. Wilke and H.-P. Kau. Stall margin enhancing flow mechanisms in a trasonic compressor
stage with axial casing slots. International Symposium on Transport Phenomena and
Dynamics of Rotating Machinery, (Paper number ISROMAC10-2004-006), 2004.
[101] Q. Yu, Q. Li, and L. Li. The experimental researches on improving operating stability of
a single-stage transonic fan. Proceedings of ASME Turbo Expo, (Paper number GT-2002-
30640), 2002.
[102] X. Lu, J. Zhu, W. Chu, and R. Wang. The effects of stepped tip gap on performance and
flow field of a subsonic axial-flow compressor rotor. Proceedings of ASME Turbo Expo,
(Paper number GT-2005-69106), 2005.
[103] X. Lu, W. Chu, J. Zhu, and Y. Wu. Experimental and numerical investigation of a subsonic
compressor with bend skewed slot casing treatment. Proceedings of ASME Turbo Expo,
(Paper number GT-2006-90026), 2006.
[104] M. W. Müller, H.-P. Schiffer, and C. Hah. Effect of circumferential grooves on the aerodynamic
performance of an axial single-stage transonic compressor. Proceedings of ASME
Turbo Expo, (Paper number GT-2007-27365), 2007.
[105] F. Danner, H.-P. Kau, M. Müller, H.-P. Schiffer, and G. Brignole. Experimental and numerical
analysis of axial skewed slot casing treatments for a transonic compressor stage.
Proceedings of ASME Turbo Expo, (Paper number GT-2009-59647), 2009.
Literaturverzeichnis 105